Movement of Material in Quality Inspection
Does anyone know a way to move material from one plant code to another and still keep the material in Quality Inspection, blocked or restriced. We are now having to move the material to Unrestricted in order to move it and the mateial has actually gotten to our customers as a result. We want to keep the material in a status that would not allow orders to cut against it but we can move it to other plant codes.
thanks to everyone for your responses. However, the MB1B will not work in this case. The seniro is this. I have material at an off-site warehouse with plant code ABCD (warehouse managed). The material is in QI there. I need some of the material at the manufacturing site plant code XYZ1. I want to enter a UB transfer order (STO) and not take the material out of QI at ABCD so that the remaining material left in ABCD will remain in QI. The problem is if we have material that is off grade at ABCD and we want one unit sent to XYZ1 for testing we have to take the whole off graded lot out of QI in order to move the one unit. Since the off grade was put in unrestricted it has on occasion gotten out to a customer.
Edited by: Renee Flatt on Feb 7, 2008 11:00 PM
Similar Messages
-
QM- Material in quality inspection
Hi Gurús,
Hi Gurús,
We have some materials in quality inspection. For each material exist an inspection lot but not an inspection plan.
I would like to know if there is a way to move the material from quality inspection to unrestricted use, but without creating an inspection plan and recording a use decision
Regards
EnzoHi,
There are 2 possibilities -
1) If you have activated QM at material master & due to this the material is placed in the inspection lot, then you can transfer the same in QM only.
2) If you have not activated QM for material, but selected Inspection Lot stock at PO, then you can transfer the material in MB1B by movement 321
Regards,
Prashant -
How to move the stock after quality inspection in wm
hi ,
if i am posting GR with PO for the material XXXX quantity of 10 it should not be posted in Warehouse. after completion of stock inspection in QM then only it moved to warehouse . But the problem is when i post gr in migo the transfer requirement created automatically...if i make this TR manual, two posting occurs one for gr posting and another one for manual tr...how to control this....
ex: matxxx-10 quantity
migo posted(no stock should be posted in wm)
after qc--8 quantity o.k
then we need to move this 8 quantity to storage bin.
how to achive this process in WM. (i already working manual TR it will create two posting)
Thanks
Muthuraman.DHi,
Use movement type 103 for GR. so, the goods will posted in to blocked stock. you deselect the auto TR creation for 103 movement type.
once the Quality inspection over the do the 105 to release blocked stock to unresticted stock. in 105 you activate the auto TR creation.
Now you may avoid double tr creation.
this you have to discuss MM consultant also. because of 103 & 105 movement type using.
SAM -
Movement of Material from Quality.
Hi ALL,
The inspection lot is created with Insp. type "04" ..'Goods receipt inspection from production'...The usage decision as "DEV2" has been made for the lot...but the qty for offgrade has been posted to Quality instead of unrestricted. and new insp lot of type '08' is created..for the offgrade..
On analysis it is found "Post to insp stock " indiactor was not set...So this takes care of all future lots...But for the current lot how to move the material from Quality to Unrestricted...SAP does not allow to carry out UD for the 2nd lot.."08" .
Your help is required..
Thanks,
Regards,
Ameya K.Hi Sriramachandra,
Thanks for the reply..Actually now two inspection lot exists...one with type"04' whose UD was done as "DEV2" devalue for scrap..and as a result system prompted to enter the Offgrade material ...
As a result new lot got created with new batch for the offgrade...Now do i have to create insp plan for the offgrade...or is there any other alternative...?
Thanks
Ameya k. -
How to consider sample qty of raw material's quality inspection during mrp.
hi expert.
i have to consider sample qty of raw material's quality inspection during mrp.
i am wondering how to implement it.
is this possible?
thank you~~!!Hi Seung Hyun,
I think it depends on the sample quantity, whether it is a fixed quantity or it depends to the raw material quantity or requirement from the orders. If it is not fixed, then you can use scrap percentage as suggested by Vivek.
If it is fixed quantity, then there are several alternatives to follow:
Include the sample quantity to your safety stock
Create another material number to distinguish the sample from the original raw material number and include it in the BOM
Regards,
Julian -
Vendor return material to quality inspection.
Hi,
I have send Raw materials to vendor for processing. Here we received the final product from vendor
and some Raw materials are left with the vendor.
I want to take back the balance Raw materials from vendor and the balance material, when I take back,
it should go to quality inspection.
What movement i have to use .
Rgs
Vijay.Hi
Inform your QM Consultant to add 542 movement in quality inspection parameter.... he will be able to do it the similar way how he would have done for movt type 101....he just needs to add 542 in the list...
Award if u find it useful
Regds
santosh -
Non stock material and quality inspection
Hi All,
We are using a material short text for a material procurement. System allows me to post the goods receipt with mvt type 101 into quality inspection stock.
However once posted to QI stock, we can not enter 321 movement with reference to GR document.
But i can enter rejection for full or partial quantity using movement type 122,with reference to GR document.
Can any one suggest the method to transfer the stock from QI stock to consumption. SAP doesnot allow consumption from QI stock. How to handle the process.
PrashantHi,
When you do GR at that time only system books the consumption of material quantity and value immediately. Since there is not any material master (Material text purchase)
The quality lot generated is for keeping the record of the materials Usage Decision and Result Recording and to generate the COA. It is not related with Stock Posting since there is not any stock after GR. -
Movement of stocks in quality inspection from warehouse to warehouse
We are currently implementing SAP with WM and was told that material that is produced on our production lines that is received via GR transaction into Quality Inspection status cannot be moved from one warehouse in WM to another warehouse in WM even if both warehouses are under the same plant. Is this valid statement and if so is there any recommendations to provide for this as a requirement?
I believe it's a true statement across Plants, I've never tested within a Plant. If you have batch management, you could consider using a characteristic to restrict use/control status instead.
Regards,
Nick -
Material In quality inspection.
Dear All, I am a SAP MM consultant and need you help.
QM Proc.key was activated in material. (No inspection set up is done).
PO was created.
GRN Done.
Material posted to quality but no Lot generated.
Then some how inspection set up was done. (Dont know how it happend).
NOw we want to post the stock to Unrestricted stock.
PLz suggest suitable way to do this.
Any way to create lot manually and assign it to respective GRN and then do QA11.
Plz suggest.
Regards,
Amit P Hiran
njoy SAP...
Njoy Lyf...>
Amit P Hiran wrote:
> Any way to create lot manually and assign it to respective GRN and then do QA11.
> ...
Please understand. Manual created lot can not assign to already posted GR stock.
If you try to post stock from QI to unrestricted through inventory trx then are you getting any error message?
Do you want insp lot to be created or not? what is your business req?
Best way to do is cancel GR doc, so system automatically cancel lot. Now set all master data correctlly as per your req and do GR once again.
Hope this helps. Thanks!!! -
Transfer material from quality inspection
Hi PP and QM Guru,i have confusion in QM..when i use Qa32 for UD..after GR from production..the quantity is 40 pc in inspection...after inspection i sent only 10 pc in unrestricted wit QA32 rest 30 pc in quality inspection.
..but when i want to send rest 30 pc with pervious lot..it does not allow to do me...again i try to do manual lot generation..it also does not allow...
now my material 30 pc is inspection....how i will send this martial to un restricted
kindly suggest me
regards
AkilHi,
First goto the tcode ; MD04 and check whther the balance qty is showing in QI, if so take the Lot number and goto Tcode : QVM2 / QA12 and post .
Try using the QVM2 transaction code and post the balance qty which is showing under Inspection.
Hope this will help you.
regards
radhak mk -
Rejected material in quality inspection
Dear Guru's,
Is there any report to find out the rejected quantity in quality inspection with reference to the GR and PO.
Rgds,
cherukuriDear Guru,
we can generate or standard reports are available.
If u tell me the processes how u feed the data for rejections , i can give a better solution.
two methods are there
1) Notifications
2) GR Processes
more clarity is required.
shridhar
9880644496 -
Movement Type 321/322 for Quality Inspection in warehouse
Hi Experts,
I have stock of 950 To in Leanwarehouse in plant. I wanted to move 50 TO material or Quality Inspection to same leanwarehouse 0001 by movement type 321 but it throw error
Deficit of SL Stck.in qual.insp 11 TO : 1727 4040 0001
In MMBE I saw the stock for the same material. Why there is an error? It is also not blocked.
While I tried with movement type 322 it got accepted.
Can anyone explaing the reasons for this I shall appreciate.
Thanks for your time.Hi, it's better to ask on logistic forum.
Did you see in MMBE required value of material at Quality Inspection on entered storage location? -
Quality Inspection not cominf for a material code
Hi!
For a particular material code,already there a quality view in material master.but it is not coming for inspection in QA32.what i have to proceed further for bringing the material for quality inspection?
-M.SubaHi Suba,
Try this.
1. Go to MM02
2. Put material code and press enter
3. Go to QM view
4. Click on Insp.setup. (It looks like solid rectangular tab)
5. Assign inspection type 01 if the material comes from vendor, else 04 for final inspection.
6. Ensure that you tick on u201CActiveu201D checkbox.
7. Save
Do fresh GR. System will generate lot this time.
Regards,
Anand Rao -
Plant to Plant trasfer in Quality inspection Status
Hi All,
I would like know how can I transfer quality inspection (Q) stock from plant 1 to plant 2 and receive in quality inspection (Q) status as well. Movement type 301 is only helpful for unrestricted stock. Is there any way this can be possible? If you can help me with the steps or any documentation will be very much appreciated.
Thank you for your help!Hi,
You can only transfer the material from unrestricted stock to unrestricted stock. If you need to transfer the stock from QI to Qi inspection you can follow this process.
you can use mvt type 321 to transfer the material from quality inspection to unrestricted within plant.
After this is done you can use mvt type 301 to transfer the material from unrestricted stock of plant 1 to unrestricted stock of plant-2.
Now use mvt type 322 to transfer the material from unrestricted to quality inspection stock
Br,
Tushar Patankar -
QM- Stock en quality inspection
Hi gurús,
Some units of material still been in quality inspection but the used decision for the inspection lot for this material and batch already exist.
When we try to do a 321 movement type from transaction MB1B to move the material from quality to unrestricted stock, the system display the error message "Change the inspection stock of material MP.0V961 in QM only".....But the inspection lot had the used decision already taken
¿How can we transfer the stock from quality inspection to unrestricted stock?
Thanks in advance for the help
Regards
EnzoOption 1: What you can do is deactivate QM for this material temporary. Move the stock from quality to unrestricted then and activate QM again.
Option 2: Add a new inspection type 04 to the material. When you transfer post the material it creates a inspection lot where you should make a decision for. When you did this delete inspection type 04 again.
Option 3: You have somehow wrong entries in a table. I had the same here, when i wanted to transfer post sales order stock unrestricted with a mvt 311 to another storage location i got the same error.
I created a SAP note for that and this was the reaction:
the error message is indeed not justified.
It is caused by a faulty entry in control table T156M.
Display T156M using se16 with key BUSTM='MAA7'. You get 6 entries.
Change the display in order to show table field LBBSA:
BUSTM ZUSTD CNT02 LBBSA
MAA7 01 01
MAA7 02 02 <<<< wrong! LBBSA should be '01' for this line
MAA7 0 01 08
MAA7 0 02 08
MAA7 2 01 01
MAA7 2 02 02
the same table entry has two more invalid settings, fields SMSKA and
SMSSA:
T156M key BUSTM MAA7
ZUSTD
CNT02 2
->
SMSKA AQ1 -> should be A01
SMSSA ASQ -> should be ASL
Maybe you are looking for
-
I tried entering in a new debit card number into my iTunes account yesterday, from my ipod touch. For some reason it was telling me the information I entered does not match my bank account. I tried 3 or 4 times, but to no avail. I figured I would wai
-
USB 3.0 port thinks it is USB 2.0
I just bought a new HP ENVY 15-j101tu Notebook PC. When I plug the external USB 3.0 hard drive the system pops up message saying the device can perform faster when connected to USB 3.0. The speed of file transfer from laptop to the external hard disk
-
My imac has no bluetooth but I still would like to use a magic track pad...
I have a 20 inch imac from 2009 which has no built-in blue tooth. Is there a way so I can still use a wireless keyboard or a trackpad?
-
Hi, I have my jar file created with the main class specified. That works fine but it fails to find associated libraries which I have included in a lib folder in the jar. So my questions is how do I specify on the command line the classpath to look at
-
Difficulty installing update 9 patch
Hi When I try to apply 120186-13, I get sudo patchadd 120186-13 bla bla Patch 120186-13 failed to install due to a failure produced by pkgadd. See /var/sadm/patch/120186-13/log for details The log says /home/paulf/120186-13/SUNWstaroffice-base/instal