Movement of soldiers in column

I am writing an application that invloves two
columns of soldiers moving towards each other. When
the collide the fight and die. does any one have a
good way for the soldiers in the back rank to move
forwards as the soliders die in the front rank?If I were a soldier in the back ranks and if I'd see what you just described
I'd change places with the bloke just behind me. Repeat until safe ...
kind regards,
Jos

Similar Messages

CO11N-While Goods Movement System Not Allows Column/Field COST CENTER

Dear Friends,
While doing confirmation of PP/PM Order and doing goods movement the system not allows the Column/Field of COST CENTER.
Thanks and Regards,
Satyajit
PP/PM

Dear Thyagarajan,
1.I think the Planner Gruop will be at order level.
2.If I assigned the different Valuation Categories then I need to assign no.of G/L accounts.
Plz look for my senerio->I have a single Mnt.Order in which different operations carried out from different departments like civil,electrical,mechanical.Its like one project in PS.Now I assiged different Workkcenter/Cost Centers to respective operations.Now after confirmation,when I look the Cosing Report system shows the activity Cost departmentwise as its linked to workcenter/cost center,but material cost how it will get posted different departments?
Manually by 261->Order+Costcenter...I can post it but there is problem in Auto Goods Movement
Plz correct if wrong.
Thanks and Regards,
Satyajit

I have never used PS, and I am trying to edit a brochure created by someone else. I need to move text from one column to another

I have never used PhotoShop and do not have time at the present. Please help me to move a section of text from one column to another in a brochure.

Here are 3 options for future reference:
1. With the setup you've described, apply a Match Move behavior to the text and make the rectangle the source. Change the Transform parameter to Mimic source. This way you can still adjust the text postion as needed, but the rectangle will drive the animation.
2. Use a group to do the animation. Put both your rectangle and text in the same group and animate the group's postion.
3. Use the Link behavior.
Each of these has it's advantages depending on what you need.

How can I Move data from one column to another in my access table?

I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?

I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message..

Move row values to columns

Hi all,
i have a a table that looks like this:
ID NAME ADDR
01 SAM USA
02 JIM USA
03 BEN USA
03 BEN ENG
04 TIM ENG
05 MEG USA
05 MEG JAP
05 MEG ENG
i need it so that names BEN and MEG do not have separate records for every ADDR they have. every ADDR should be in a column within the same record. the maximum ADDR is 3.
ID NAME ADDR1 ADDR2 ADDR3
01 SAM USA
02 JIM USA
03 BEN USA ENG
04 TIM ENG
05 MEG USA JAP ENG
can somebody help?
Thanks!

SQL> with t
2 as
3 (select '01' ID ,'SAM' NAME,'USA' ADDR from dual
4 union all
5 select'02','JIM','USA' from dual
6 union all
7 select'03','BEN','USA' from dual
8 union all
9 select'03','BEN','ENG' from dual
10 union all
11 select'04','TIM','ENG' from dual
12 union all
13 select'05','MEG','USA' from dual
14 union all
15 select'05','MEG','JAP' from dual
16 union all
17 select'05','MEG','ENG' from dual
18 )
19 select id,
20         name,
21         max(decode(rn,1,addr,null)) ADDR1,
22         max(decode(rn,2,addr,null)) ADDR2,
23         max(decode(rn,3,addr,null)) ADDR3
24 from
25      (select id,name,addr,row_number() over(partition by ID order by 1) rn
26       from t)
27 group by id,name
28 order by 1
29 /
ID NAM ADD ADD ADD
01 SAM USA
02 JIM USA
03 BEN USA ENG
04 TIM ENG
05 MEG USA JAP ENG
SQL>

Move text from one column to another depending on character count

Hello,
I am trying to find a way to have text start in a specific column depending on the character count.
Basically our site will have 3 columns. For example if the text only has about 300 Characters - it would start in the right column. If it had between 301 & 600 characters - it would start in the middle column and run to the right column. If it had more than 601 characters - it would start in the left column and run to the middle then right column.
Is this possible?
Thanks in advance for any help!
James

If you look at the String class you can probably devise a series of steps to do what you want using some basic logic. The String class has a length property that tells you how many characters it contains. Assuming you wouldn't want to split words, you could use something like the indexOf method to find the nearest blank space following the 300th character. Then you would be wanting to build different strings for the different segments you create.

Move workflow status column from one library to another in Sharepoint 2010

Good morning,
I have two libraries in the same site, LibraryA and LibraryB.
On LibraryA, users upload documents upon which they start a collect signatures workflow. The view on LibraryA contains a column with the signatures workflow name showing status: ‘Compete’, ‘In progress’.
Now on LibraryA I have created a workflow to move any document one month after creation to LibraryB (using retention schedule) irrespective of signature workflow status.
Now what I would like is to have the signature workflow status shown in LibraryB as well. From what I understand you can add the workflow status column only on the library with which the workflow is associated. I also tried, on LibraryB, to create a new
column which Lookups in {Signature Approval History – Outcome} but this did not do the trick either.
Any workarounds?
Many Thanks

Hi,
According to your description, my understanding is that you want to move the workflow status column to another library in SharePoint 2010.
I recommend to use another column to get the value of the workflow status column and then move this column to another library.
We can use workflow to update the column with the value of workflow status column.
However, the workflow status column stores the value with numbers which represent different status, so we need to update the column with corresponding status based on the numbers in the workflow.
http://chanakyajayabalan.wordpress.com/2010/03/08/sharepoint-workflow-status-codes/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

SPD 2010 - ID Column moves to end of List in DataSheet View

Randomly, the ID column will move from the first column to the last column when you access DataSheet view.
In Standard View it is still column 1....
We are using this ID Column:
ID# (linked to item with edit menu)
Other times this ID Column will add itself to the DataSheet View, but not the Standard View:
ID#
This is frustrating my users to NO end having to drag the column back to the first place.
Any help is GREATLY appreciated!~
<label for="ShouldDisplayTitle"></label>

Hi Amber,
Let's verify the followings:
How did you create the ID# column? I am wondering whether you changed the Name of "Title" to "ID#". If not, please give the steps to create the column.
You mean that the ID# column is changed from the first position to the last one in Datasheet view, is it right? Do other columns have this issue?
Do other lists have this issue?
To narrow down this issue, please do:
Create another column which has same type with ID#, test again, compare the result.
Create a new list, and add a same column with ID#, then test in the new list, compare the result.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to display item when mouse moves over Column value??

Hi there
It would be helpful if you could resolve the following :
i) I need to display the column 'A' values of my report in a Text field when mouse moves over column B of my report.
ii) I can able to display the same column value when mouse moves over or onclick happens. but my requirement is something like i have to display the other column value when mouse moves over.
iii) Also i noticed that, i can able to display the item only on "Display only Item" and not on Text field.
Any pointers to display my column value in Text field when onclick happens on my report column?
iv) One more thing that i noticed, i can able to perform onclick or mouse over only on Editable column and not on
non editable columns.
Any pointers on how to achieve the same when mouse moves over Non editable column of report?
Reference: I have created a dummy application (refer the following link), where i can able to display column value Salary on display only item using mouse move Event.
My requirement: when i click column Ename , the text field should show salary.
http://apex.oracle.com/pls/otn/f?p=56045:1
User:guest
Pswd: apex_demo
Any pointers on this would be appreciated.
Thanks
Vijay

Vijay,
If you use Jquery then this should do the trick.
$(document).ready(function() {
   $(".t20Report t20Standard tr").hover(function() {
     $("#P2_SALARY").attr("innerHTML",$(this).find("td:last input").attr("value"));
{code}
after looking at the source of your page it seems that your class for your report region is *class="t20Report t20Standard"* I am not 100% sure but you might have to correct that in the template. I am not sure how the selector will handle the space in the class name.
Hope this helps,
Tyson

BEx analyzer don't work move columns in report (like drill down)

Hi
    I have an issue on BEx Analyzer...    When I built one report... add some characteristics and soo on... but then I need to move the order of columns... then I try to drill down.. or move to order of column... It doesn´t work,
    I did this function before.. when the poin of the mouse it's convert with other draw... like -->
                                           <--
    But this time it's not possible...
    Then If I press the icon that say design mode... I saw that the option of navigation is active... and when I close the design mode... the functionality of move columns work...:(
    It's difficult that each time that the user need to move columns in Bex will go to design mode... just for activate..
    I know thta we have some function on context menu.. for move columns one by other... but not for certain position..
    Could you help me please?
    I will appreciate your help and I will assign points for your answers.
Alice

Hi Alice,,
This happens some time, when i am unable to drill down by just dragging and dropping the columns. though i could not find out why. Best thing, what i do, i refresh the query and next time it works Ok.. and other th ing what you can do, right click, on the characteristics list on the left pane, go to "change drilldown", then " drill down by" there the user can select the option he is looking in for.
Hope this helps.
Shakeel.

Mouse Move on the column Chart

Hi all visitors
I have created one crystal report and in my report i have created one column chart.
but i don't show the value on the column chart,however, when i move mouse on that column chart,
it will show the value.but in crystal report server,when i move the mouse on the column, it doesn't show the value like crystal report.
Anyone know about this how to show the value on the column when mouse move in crystal report server?
Please help me for this.
Best Regards,

Unfortunate Tool tip doesn't work with CR Charts.
Probably there may be some trick that will configure to achieve. But I didn't came across till now.

Field not displaying in ALV but going in column-set...

Hello Gurus,
I am facing a strange issue in ALV. I am specifying the column position when I create the field list.
But when I execute the ALV, that field goes out of ALV. I have to goto ALV layout setting to move that feild from column set to be dispalyed on ALV. I am not sure why this is happening ? Can someone please help ?
Regards,
Tushar.

Hi, Please check the how the fieldcatalouge is built.
Also check whether there is any default layout assigned in alv layout management.

Use presentation hierarchy column in table prompt section

Hi,
I right click on presentation hierarchy column -> Move -> To prompts.
Column filter appears in table prompts section but there is only one value to select in a dropdown - top levelparent of hierarchy.
Is there any way to make all hierarchy levels be displayed in prompt?
Regards,
mudi

Take 2 column first column as parent and second column as Child

Suggestion: Oracle text CONTEXT index on one or more columns ?

Hi,
I'm implementing Oracle text using CONTEXT ..... and would like to ask you for performance suggestion ...
I have a table of Articles .... with columns .. TITLE, SUBTITLE , BODY ...
Now is it better from performance point of view to move all three columns into one dummy column ... with name like FULLTEXT ... and put index on this single column,
and then use CONTAINS(FULLTEXT,'...')>0
Or is it almost the same for oracle if i put indexes on all three columns and then call:
CONTAINS(TITLE,'...')>0 OR CONTAINS(SUBTITLE,'...')>0 OR CONTAINS(BODY,'...')>0
I actually don't care if the result is a match in TITLE OR SUBTITLE OR BODY ....
So if i move into some FULLTEXT column, then i have duplicate data in a article row ... but if i create indexes for each column, than oracle has 2x more to index,optimize and search ... am I wright ?
Table has 1.8mil records ...
Thank you.
Kris

mackrispi wrote:
Now is it better from performance point of view to move all three columns into one dummy column ... with name like FULLTEXT ... and put index on this single column,
and then use CONTAINS(FULLTEXT,'...')>0What version of Oracle are you on? If 11 then you could use a virtual column to do this, otherwise you'd have to write code to maintain the column which can get messy.
mackrispi wrote:
Or is it almost the same for oracle if i put indexes on all three columns and then call:
CONTAINS(TITLE,'...')>0 OR CONTAINS(SUBTITLE,'...')>0 OR CONTAINS(BODY,'...')>0Benchmark it and find out :)
Another option would be something like this.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:9455353124561
Were i you, i would try out those 3 approaches and see which meet your performance requirements and weigh that with the ease of implementation and administration.

Moving Columns in Jtable. Columns not in sync with header

Hi,
I got several tables within a scrollPane. So I use the add method on the scrollPane to add them. In order to see the headers I add the header separately :
add(table.getTableHeader());
add(table);
The problem is the following :
When I am moving my Column around, the header moves around, however the columns don't move ! So The header does not correspond anymore to my column !
Do someone have some ideas how to get ride of that problem ?
Thanks
Emmanuel

One thought: Add the tables to another container, such as a JPanel and then add the panel to the JScrollPane

Movement of soldiers in column

Similar Messages

Maybe you are looking for