Movement type 301
Can anyone tell me what is the difference between the movement types 301 and 641. When is it not possible to use the movement type 301 for stock transfer between plants?
Thanks in advance
Tara
Hello,
Movement Type 301 - Transfer posting plant to plant in one step
The quantity is transferred from unrestricted-use stock in the issuing plant to unrestricted-use stock in the receiving plant.
Movement Type 641 - Goods issue for a stock transport order (Two step process)
The quantity is transferred using delivery from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
I have not used 641 but if it is 2 step then
in 1st step u need to issue the goods from suppling plant to the reciving plant & as it is 2 step then the stocks are going to be in reciving plant transit
then again u have to use the tcode for the reciving of stock and probably movemnt type is going to be 643 to recive the goods at reciving plant
Reward points if helpful,
Regards,
Archit
Similar Messages
-
Stock Transfer by movement type 301 referring STO
Dear Experts,
I am unable to generate a stock transfer referring an STO in MB1B or MIGO by movement type 301. I am successfully doing whenever I refer a Reservation. Please advice.
Regards,,
Subhro ChakravartyHi,
i have to ask you to read the SAP Documentation for 'Stock Transfer Using a Stock Transport Order'.
It is explained there how to post a goods movement for STO.
http://help.sap.com/erp2005_ehp_04/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
br, G -
Stock Transfer for Excisable Materials Using Movement Type 301
Hi,
We are having a Plant 1002 as excisable Materials.
During GR we following the process like GR (Part -I), Capture Invoice, Post Invoice.
Can we transfer the Material from Plant 1002 to other Plant, say 1001, using Movement Type 301?
Or we need to follow some other router for Stock Transfer for the Excisable Materials?
I was told by the ex-consultant that we would be using Mov Type 301 for all Stock Transfers, but I have a doubt, please guide.*
Regards,Hi PK,
Here in Brazil we work with excisable material and when we have to transfer it plant to plant, we have to use IVA that performs tax posts on accounting document. Also, we have to create Nota Fiscal (BrazillianLegal Document).
I think you have to talk to your legal/accounting area in order to make sure which procedure you will have to use.
If you need tax posting on accounting document, then you will not be able to use 301 movement type.
We use MM/SD Plant to Plant transfer (movement type 861 / 862)
Depending on your Legal/accounting area feed back, you could use this scenario or just MM plant to plant transfer (movement type 303/305).
If they are ok with no tax postings on accounting document, then 301 movement type should be used.
Try to make a test, show then how it works, then you could get ok from then
I hope it helps you.
Best Regards,
Natan -
Automatic batch number in migo_tr with movement type 301
Hi!
I am trying to do a transfer from a plant to another with MIGO_TR movement type 301.
The thing is that I must enter manually the batch number in the destination plant.
Is there a possibilty to configure the system in order to copy in batch number field for destination plant the same batch number entered in the plant from where I want to transfer?
Thanks!your system does not work like designed
please read this very old but release independend OSS note 555 - Batch treatment during stock transfer and transfer posting:
Key word: Transfer batch
If you enter materials for stock transfers or transfer postings with movement types 301 to 316 via collective processing and in this case enter the batch number for materials to be handled in batches, the system automatically sets 'Receiving batch' equal to 'Issuing batch'.
Additional key words
Cause and prerequisites
The collective processing screen does not provide space for an additional transfer batch in the two lines provided for a material movement.
Solution
During the stock transfer of material, the batch is usually retained. If you want to change the batch number, you have to enter the item in question step by step (F8=New item). -
i want to attach some accounting aspects to this movement type 301 cause instead of using a sales order,outbound delivery and invoice i want to use mb1b mvt type 301 to do the transfer so i want to add some accounting aspect of it to the movement type
Hi,
Can you please elaborate your requirement.
Hope you know that 301 mov. is for Stock transfer from One plant to another (Single step).
Accounting document will be created if you transfer a valuated material & also quantity update happens.
Thanks & Regards, -
Capture excise inv for movement type 301
Hi All,
can we capture and post excise invoice for movement type 301.
If "YES" so plz give me detail.
Thanx....
TruptiHi,
I think you can do it.But you have treat this as stock transfer purchase order and you have to do the billing through the SD module. For details you can check with MM Forum.
regards
ramakant -
Hi gurus,
Can someone tell me if is possible use taxes in a movement type like 301?
Best Regards
João Fernandeshi,
301mtype created CEI
tcode:J1is
regards
ka -
Screen Sequence for Mov Type 301
Dear All,
I am doing two step transfer from one plant to another plant belonging to two diff company codes. When I use 301 movement type, the item detail data is coming at the top and the header data is showing at the bottom of the screen.
Please suggest where can I change this screen sequence for this movement type.
Regards
VTI am sorry, Its a typing error. I am talking about 303 itself. When i try to post material document with 303, the item detail is showing at the iter overview's place and vice versa. Could you please suggest where can I change settings so as to get the correct screen sequence?
Regards
VT -
Hi, stock r moved frm 1 plant to another.
then how to update costing of the material maintained for one plant , for the other plant.
scenario is: one plant is procuring , then it is sent to another plant for manufacturing and from thereon it is despatched.
thanx
souravHai Sourav,
301 - M.Type is Transfer the material one plant to another plant.
1. Material is same.
2. Location is different.
3. how to valuate the material for valuation area
( Plant ) that is important.
4. Example Material 'A' Plant is 0001 and 0002.
5. In 0001 - value is 100
6. in 0002 - value is 110.
You are maintain Like this.
Now you want to transfer the material form 0001 to 0002.
Qty - 1000.
The Accounting Effect is Dr. 100000
Cr . 100000.
In transfer posting What is the Value of from area system considure that Price Only.
regards,
Rajan. -
Plant transfers and purchasing orders tracing for movement type 301-310
Hi ,
When we do material transfer from plant to plant( MVT 301-310) it creates the material documents in MSEG. What's the table or the best way to find the purchase order details for the material documents created in MSEG or the materials used during transfers?
I appreciate your response
Thanks
ReddyHi ,
Go to table EKKO , put purchase Doc category ( must be different for Plant Transfers ) and also try out Supplying Vendor and Customer Fields..
VAT Registration no can also be part of your selection..
Please have a look at EKKO fields available and make your appropriate selections..
Regards
Sarada -
Excise Capturing at 301 Movement type
Hi All
Is it possible to capture and post the excise invoice for movement type 301.
if yes then plz give me in deatil
Thanx..Truptihi
maintain following settings
Go to SPRO - IMG - Logistics General - Tax on Goods Movement - India - Account Determination - Assign G/L account for Excise transactions.
EWPO Credit CENVAT clearing account
EWPO Debit RG 23 AED account
EWPO Debit RG 23 BED account
EWPO Debit RG 23 ECS Account
EWPO Debit RG 23 NCCD Account
EWPO Debit RG 23 SED account
EWPO 10 Credit CENVAT clearing account
EWPO 10 Debit RG 23 AED account
EWPO 10 Debit RG 23 BED account
EWPO 10 Debit RG 23 ECS Account
EWPO 10 Debit RG 23 NCCD Account
EWPO 10 Debit RG 23 SED account
J1IEX
regards
kunal -
Error in Standard SAP movement type 309?
Path: SPRO > Logistic execution > Warehouse Management > Interfaces > Inventory Management > Define
Movement type > Assign WM Movement Type References to IM Movement Types
IM Movement type 309 has as Reference Movement types WM 301, 302 and 309.
IM Movement type 311 has as Reference Movement types WM 311, 312 and 309.
Path: SPRO > Logistic execution > Warehouse Management > Interfaces > Inventory Management > Define
Movement type > LE-WM Interface to Inventory Management
Reference Movement type 301 has WM Movement type 301.
Reference Movement type 302 has WM Movement type 302.
Reference Movement type 309 has WM Movement type 309.
Reference Movement type 311 has WM Movement type 311.
Reference Movement type 312 have WM Movement type 312.
Path: SPRO > Logistic execution > Warehouse Management > Activities > Transfers > Define Movement
types
WM Movement type 301 has Destination Storage type 920.
WM Movement type 302 has Source Storage type 920.
WM Movement type 309 has Source and Destination Storage type 922.
WM Movement type 311 has Destination Storage type 9210.
WM Movement type 312 has Source Storage type 921.
In my opinion this means that if I make an IM movement with movement 309 the material will be picked from a Storage
bin and moved to Storage type 920. After the change the material will be brought back from Storage type 920 to the same Storage bin.
The change will be done with WM Movement type 309 in Storage type 922.
This creates negative stock in both Storage type 920 and 922.
In my opinion this means that if I make an IM movement with movement 311 the material will be picked from a Storage
bin and moved to Storage type 921. After the change the material will be brought back from Storage type 921 to the same Storage bin.
The change will be done with WM Movement type 309 in Storage type 922.
This creates negative stock in both Storage type 920 and 922.
Is this an error in SAP standard? Should I Change the Source and Destination Storage types of Movement types 301,302,311 and 312 to 922?Hi,
Please check wheather the material type of the material belongs to NLAG/UNBW or any other type which will not have qty/value updations for that plant at Attributes of the material type at SPROlOGISTICS GeneralMaterial mastermaterila types
Or take the question mark which is there on the error screen so that the information will become self explanatory.
Please reply back with your info. -
Message type control for movement type
Hi All,
We are using two movment types,
301 - Plant to plant transfer
934- initial stock entry reversal(custom one).
Issue is when ever available stock of materia lM1 is consumed against some sales orders , if we try to do transfer posting using transaction MB1B MOVEMENT TYPE 301 system is throwing error message zero pcs available for M1 and not allowing us to post which is correct (messge M7 181).
But for the same material M1 if try to post using transaction MB1C and movement type 934 system is tHrowing warning message zero pcs available for M1 , but allowing to post there by removing the confrimed / consumed stock from the sale order. here also the message is M7 181.
So please let me know can same message type is used differently for two different movement type. If so where is the setting is being done.
Regards,
BabsDear ,
Because u already book for sales orders so release the sales orders you can do, or increase the stock and u can use .
regards
shiv -
Specify Storage location in Movement type 311 - Migo
Dear All
we have 3 plants 1000 , 2000 , 3000 , every plant have many storage location as the following :
plant 1000 ( A01 , A02 , A03 )
plant 20000 ( B01 , B02 , B03 )
plant 1000 ( C01 , C02 , C03 )
i have on user "XX" access only plant 1000 ( A01 , A03 ) for some movement type (101 - 161 - 261 ) , also he used movement type ( 301 - 311 - 313 -315 ) to transfer from his storage location A01 , A03 to other storage location B01 , B02 , B03
when we add transaction MIGO to the user XX
how can i specify that user can only transfer to storage location B01 , B02 , B03 without access any movement to the storage location B01 , B02 , B03 .
i need help urgentlyHi,
You may maintain the authorization check for storage location in the path: OLMB - Authorization Management - Authorization Check for Storage Locations. Now, use the authorization object M_MSEG_LGO to restrict the usage based on user role. Refer the KBA: 1668678 - No authorization check for storage locations in inventory management
But if you are using one step procedure for stock transfer (301), then the user should have authorization for both plants to transfer the goods. If you want to restrict the same, you may go for two step procedure. But in case of 311 & 313, both the storage locations are entered in MB1B and hence both the storage locations are checked for authorization. Refer the note: 205448 - Authorization check M_MSEG_LGO for stock transfers
Regards,
AKPT -
Classic Scenario - Reservation Movement Type
Hi All!
We are in a Classic Scenario environment and the requirement is for a certain type of material to create Reservations in the backend with a different Movement Type. Lets say we have three types of Stock Materials: two of these will create reservations with the Movement type 201 defined as default at the root level but I want the third type to create reservations with movement type 301 Transfer posting.
I have assigned this value (301) for the movement type attribute for a particular user and set it up as default but it didnt work, the reservation was still created with 201.
Is there any way I can achieve this? Will I need to use the BBP_DOC_CHANGE_BADI implementation?
Any idea will be much appreciated (and rewarded of course )
Many thanks
ElisabetaYes, I have successfully implemented this by using BAdI BBP_CREATE_RES_BACK as Dave suggested. I only wanted to change the movement type for a specific plant so Iu2019ve done something like this
method IF_EX_BBP_CREATE_RES_BACK~FILL_RES_INTERFACE.
data zl_res_items type bapiresbc.
if res_header-plant = u2018my_plantu2019
move '301' to res_header-move_type.
Endif.
maintain receiving plant & storage location
move res_header-plant to res_header-move_plant.
now this is the receiving plant which I am taking it from SRM
I have put in the functional specification accepted by the user the fact
that in SRM when they create the shopping cart they have to specify in the
location the storage location which is the destination
move zl_res_items-store_loc to res_header-move_stloc. move_stloc is
the destination
Then Iu2019ve changed the res_items-plant & res_items-store_loc to be the supplying location which in our case it will always be 0001. If your supplying
Location can be different then you will have to code some logic in here when you loop at res_items.
Also I have made the Plant attribute maintainable so that the users can maintain their own default destination plant if they want.
I hope this helps.
Good luck
Elisabeta
Maybe you are looking for
-
Difference between SXPG_COMMAND_EXECUTE and Open data set mechanism
Can you please help me to know the difference between moving a file using FM "SXPG_COMMAND_EXECUTE" and moving file using "open data set - transfer file- close data set" mechanism?
-
Sync problems with iPhoto & iPhone through iTunes.
I can not sync my iPhoto with my iPhone through iTunes. Error (-50) ? on my new laptop, I upgraded iPhoto to 9.5.1 and opened a library that I had backed-up from my previous laptop. iTunes refuses to sync photos with my iphone. It gts stuck on the "i
-
How to create a TOC without adding a page to project?
Hello, Am trying to add a table of contents to my brochure in indesign CS6 but I don't want to include it in my print job or to add additional page to my brochure? I really just want so that when I export it to a PDF it will give me the option to j
-
The chinese character and date in the result are not displayed properly. How can I change the nls lang setting as same as in db? And, how to change the date format to yyyy/mm/dd? Please help! Thanks!
-
Black Screen On ZBook 15 G2 - The Shared SPI Flash was recovered from Embedded Controler Flash
Hi I have just bought a HP Zbook 15 G2 (1day old), PN K3C12PA a off the shelf unit (CPU 4910MQ, GPU 2100K, Z Turbo Drive SSD, QHD+ screen, RAM 32GB) This unit comes with the 256 GB HP Z Turbo Drive (PCIe SSD) I used the supplied disk to upgrade from