Movement type 311 is not planned in Back Ground Processing

Hello,
I have created a BDC to run the transaction "MIGO" with movement type 311.
Its working fine in foreground. But i execute in Background i am getting a error message "Movement type 311 is not planned for this operation".
I think there should be some config settings. But i don know where to check configuration ?
If anyone has any sugggestions or answers , Pls post here.

Hi,
Better you can use the BAPI "BAPI_GOODSMVT_CREATE".
Check with your Functional Consultant for this issue......
You may also look for an OSS note and in Last raise a ticket to SAP..but there is no surety that every txn will work with BDC in Background Mode.

Similar Messages

"Movement type 123 is not planned (Entry is not copied over)".

Dear All,
While executing Movement Type 123, for reversal of a vendor return i get an error message "Movement type 123 is not planned (Entry is not copied over)".
Transaction used : MIGO
Goods Receipt | Purchase Order | Movement Type 123
Any specific reason as to why the system is not allowing me to execute the movement. And what is the procedure to overcome this error.
Shall await your reply
Thanks
Shabeen Buhary

dear shabenn
It is absolutely true, you can perform 123 movement i .e. cancellation of return delivery only through reversal procedure of movement type 122.
If you are trying to do MIGO for 123 movement, the system supposed to throw out same error.
If you returned a goods receipt using movement type 122, you can reverse the return delivery using movement type 123. This movement type has the same effects as movement type 101.
Please revert back if any query still exist...
Rahul

Error: Movement type 101 k not planned

Hi Freinds,
While doing GR for Consignement framework order , im getting this error as 'Movement type 101 K is not planned. (Entry is not copied over)'.
Could u help me with this please.
Thanks
Akkshaya

Hi,
Enter the item category K for the consignment item in your FO . To ensure that the goods receipt is posted to the consignment stores and an invoice receipt cannot be generated for the item.
BR
Diwakar
reward if useful

LQ02 Transaction not work in Back ground processing

Hi
LQ02 transaction working well in forground process but not working for background process. I did the bdc and use call transaction to post WM-IM transaction.
screen input as follows :
Warehouse number
Storage type
Storage bin
WM movement type
Storage Unit
batch job shows sucessfully completed but category stock status remain unchanged (ie quality to unrestricted.)
Any body know the alternative function module or bapi to post LQ02 transaction.
Appriciate your help.
Best regards
Pravin

when you run LQ02 in foreground, do you select anything manually or can you just hit save an everything is done?
What does job log and spool file tell you?
Did you flag the box for create mail in case of an error?
check OSS note 489286

Compressor Can Not Connect To Back Ground Processes

Anyone know how to resolve the error "Compressor Can Not Connect to Background Processes". I would attempt to reinstall only Compressor but I can not find it as a stand alone app on my Studio 5 Install Disks and I don't want to have to reinstall all of my FCP Studio apps.
Any ideas?

Hi:
Read this links:
UNABLE TO CONNECT TO BACKGROUND PROCESS
http://docs.info.apple.com/article.html?artnum=93234
What version of FCS do you have? HAve you installed Shake?
Alberto

REM- Planned order with Movement type 311

Hi,
I want to use movement type 311 along with planned order in MFBF but system is not allowing me.
Do I need to mention movement type 311 somewhere in configuration of planned order.
Regards,
Samir Wadajkar

Dear
Basically Movement 311 will be used for Material Staging.Material Staging can done with reference to the Material or with reference to the Planned Order etc...
You can do the following with MF60:
1. Direct stock transfer : You must select Staging type (Storage location level)
To use direct stock transfer, you must maintain an issue storage location for each component in the BOM (or in the material master record or the production version). The system only displays those requirements for which you have defined an issue storage location
2. Stock transfer reservation : You must select Staging type 1 (Storage location level)
The system then automatically displays the storage location view of the pull list. The system also only selects the corresponding requirements.
In Global Settings, you must adopt the default settings and you must also select Stock transfer reservation.
I hope you must have maintained the Customization Setting for Stock Determination Strategy with reference to your plant with 311 movement.
Further details refer below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8a/a5a8d04adc11d189740000e8322d00/content.htm
Hope this is clear to you
Regards
JH

Idoc mbgmcr02 movement type 311 .. goods movement not possible w/mvmt type

i am using we19 to create a test idoc...i have the ports and partners filled in...i am using movement type 311..i have the material , the plant, the storage location...the qty..i have the move material, the move plant and move storage location filled in...
when i use standard inbound processing it generates the idoc..i go to we02 and look at the idoc..in the status records i get status 51 goods movement not possible with mvmt type 311..????what am i missing
if i do the exact same thing with the transaction migo...works fine...
am i missing something????

i am trying to move material from one location to another using IDOC MBGMCR02..
I am entering the following...
E1BP2017_GM_Code=04
in e1BP2017_GM_ITEM_Create
Material=CON2020
Plant=3000
Stg_Loc=0001
Move_Type=311
Entry Qty=001
Move_Mat=Con2020
Move_Plant=3000
Move_Stloc=0002
Mvt_Ind=??????
In the Mvt_Ind I have tried E,K,M,Q
the in get a status 51 Update Control of Movement Type is incorrect(entry311XX_K)....
Is E1BP2017_GM_CODE = 4 correct???
What should be the Mvt_Ind???

Stock trasfer reservation with movement type 311

Dear APO Experts,
I have plant 1200 and storage location MRP area CA_03 within plant 1200.
When planning, STRs are created and if ciffed to ERP, reservation with movement type 301 is shown.
My question is as follows.
Is it possible to create these reservations in APO with the movement type 311 (sloc to sloc) instead of the movement type 301 (plant to plant).
Thanks in advance for your help.
Regards,
Lee, Seung Won

Hi Lee Seung Won,
To the best of my knowledge it may not work as you are expecting. The basis reason seems to be that SLOC is not treated as SLOC in APO when it is defined as MRP Area. MRP area (SLOC) is treated as Plant (Location) in APO. Hence movement type will be 301 plant to plant & not 311 sloc to sloc
Thanks,
Mangesh A. Kulkarni

MB21 mov.type 311 and planorders

Hi Gurus
I hope one of you Guys / girls can help me or point me in the right direction
In MB21 Mov.type 311 we create reservations on materials that are normally MTO Stock. This Means that the reservation will create a plan order when the MRP is run onthose materials. This is all ok, but if we have 2 - 3 reservations on the same material SAP standard is to create one plan order for the number og materials missing in order to cover the 3 reservations.
In the picking process one employee will pick the entire reservation, including the MTO which is basically a BOM for picking ( screws, botls, bearings etc etc )
The reason we use mov.type 311 is the each reservation are to be moved to another storage location that is physical Places elsewhere, but not defined as a warehouse.
Is it at all possible til have the MRP create a planorder for each reservation ?
Kind regards
Jens Olsen
Denmark

Hello Jens
If the reservations have all the same date, MRP will always create a single replenishment proposal, even if you are using lot sizing procedure EX.
See question 6 of the FAQ note 550568:
6. Question:
     There are several requirements on one day. Is it possible that the
     MRP creates a separate procurement proposal for every requirement?
     Answer:
     Same as for the daily lot size with a number of periods = 1 (lot
     size TB), requirements of one day are also grouped into one
     procurement proposal for the lot-for-lot order quantity (lot size
     EX) (see documentation for the lot-for-lot order quantity). Separate
     procurement proposals can be achieved only if you work with
     make-to-order production. Here, the requirements are managed in
     separate planning segments of the stock/requirements list.
BR
Caetano

Error while using BAPI_GOODSMVT_CREATE wiht movement type 311.

Hi All experts,
i am geting error msg, while using BAPI_GOODSMVT_CREATE wiht movement type 311.
the error msg is " For reservation 0000443815 0000, no movements can be posted".
Here is my code.
IF I_ZMM_S_MBIB_LOT[] IS NOT INITIAL.
*moving posting date and document date to header
    GOODSMVT_HEADER-PSTNG_DATE = ZMM_S_MBIB_311-BUDAT.
    GOODSMVT_HEADER-DOC_DATE   = ZMM_S_MBIB_311-BUDAT.
    LOOP AT I_ZMM_S_MBIB_LOT WHERE MENGE NE '0'.
      IF I_ZMM_S_MBIB_LOT-IND = 'X'.
*moving material and plant ,stge_loc,qty and movement type to header
        GOODSMVT_ITEM-MATERIAL       = I_ZMM_S_MBIB_LOT-MATNR.
        GOODSMVT_ITEM-PLANT          = I_ZMM_S_MBIB_LOT-WERKS.
        GOODSMVT_ITEM-BATCH          = I_ZMM_S_MBIB_LOT-CHARG.
        GOODSMVT_ITEM-STGE_LOC       = I_ZMM_S_MBIB_LOT-SLGORT.
        GOODSMVT_ITEM-MOVE_TYPE      = '311'.
        GOODSMVT_ITEM-ENTRY_QNT      = I_ZMM_S_MBIB_LOT-MENGE.
        GOODSMVT_ITEM-ENTRY_UOM      = I_ZMM_S_MBIB_LOT-MEINS.
        GOODSMVT_ITEM-MOVE_MAT       = I_ZMM_S_MBIB_LOT-MATNR.
        GOODSMVT_ITEM-MOVE_PLANT     = I_ZMM_S_MBIB_LOT-RWERKS.
        GOODSMVT_ITEM-MOVE_BATCH     = I_ZMM_S_MBIB_LOT-UMCHA.
        GOODSMVT_ITEM-MOVE_STLOC     = I_ZMM_S_MBIB_LOT-UMLGO.
        GOODSMVT_ITEM-RESERV_NO      = I_ZMM_S_MBIB_LOT-RSNUM.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          GOODSMVT_HEADER               = GOODSMVT_HEADER
          GOODSMVT_CODE                 = '04'
      TESTRUN                       = ' '
      GOODSMVT_REF_EWM              =
        IMPORTING
      GOODSMVT_HEADRET              =
          MATERIALDOCUMENT              = MATERIALDOCUMENT
          MATDOCUMENTYEAR               = MATDOCUMENTYEAR
        TABLES
          GOODSMVT_ITEM                 = GOODSMVT_ITEM
      GOODSMVT_SERIALNUMBER         =
          RETURN                        = RETURN.
      GOODSMVT_SERV_PART_DATA       =
      EXTENSIONIN                   =
    ELSE.
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Feb 23, 2011 11:46 AM

Hi Sachin,
Pass the Item Number of Reservation to GOODSMVT_ITEM-RES_ITEM .
Regards
DKS

Movement type 311 E in WM

Hi gurus,
I am working on product support @clients place where we have MTO items.
Now the scenario is that a material XYZ was Goods Receipted in a wrong storage location (0001) by the Production Order confirmation. This was due to the way it was setup was incorrect.
So to create a Delivery for these items, I had to move the stock from the current location (0001) to another location(0002) in the same plant.
For this I used MB1B - 331 E. This worked fine on the IM side.
Now on the WM side there was an entry e.g. 0001 E - Storage type (010) before the change was done.
After the change, the transfer posting entered a negative entry for the same quantity of the item. However this negative entry is lying in the Interim storage type 992 e.g. 0001 E - Storage type (992)
I want to nullify these 2 entries. So i read on some forums & thought of doing a LT01 and transfer the positive value from 0001 E - 010 to 0001 E - 992.
However for storage type 010, negative stock is not allowed.
I am confused & dont know what to do in this case.
Can anyone tell me how to nullify this WM stock ?
Your help will be really appreciated.
Thanks
Dan

Hi,
If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
I would suggest you to follow the above steps.
1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
Regards,

Disable Shelf Life Expiration date for Movement Type 311

Hi All,
Whenever we run the transaction MB1B with the movement type 311, it copies the batch and its shelf life expiiration date. Due to this, there are time when the user unknowingly enter a differrent SLED and hence change the batch unknowingly. We want to stop this. We want that while we are doing 311, the batch record and the SLED should get copied from the batch master BUT the field for SLED should be grayed out or the user should not be abale to enter ANYTHING in the SLED and the system should take the default SLED from batch master. Can we achieve it through config ? Please suggest.

Please get a user exit developed and add it to the program SAPMM07M which is used in MB1B which will solve your purpose. The User exit should be fired when using 311 movement type during copying of Batch Characteristics. Hope this helps you.

Multiple receivng storage locations on Reservation (movement type 311)

Hi
We have a requirement where we create a reservation document either using BAPI or BDC (MB21). At the time of creation we require to maintain different receiving storage location on the reservation. Currently SAP allows to maintain receiving storage location on the header field RKPF - UMLGO only and then copies the same value on all line item field (RESB-UMLGO)..The line item field is not editable or set as I/O field therefore working on finding a user exit or BADI to update fields RESB - UMLGO in background. Has any one had this requirement and in case yes can you please advise how was this addressed.
Thanks
Lokesh

Hi,
If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
I would suggest you to follow the above steps.
1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
Regards,

Ountbound delivery with MB1B movement type 311

Hi,
I would like to create an outbound delivery when I make the tcode MB1B movement type 311.
Somebody could tell me where is it in SPRO?
Thank you
Regards
Kari

Dear Kari
I am afraid that the approach suggested is not feasible. As of SAP R/3 4.7, it is indeed possible to carry out stock transfer orders between two storage locations of the same plant but you cannot create the purchase order with transaction MB1B. (The movement type, moreover, would be 641, not 311.)
However, MB1B does create outbound deliveries for transfer postings with movement type 311 if the issuing storage location is either Handling Unit managed or assigned to a decentralized WM.
Best regards,
Christiane

MB1B movement type 311

Hi every body
I need help about transfer order.
Whan I make a transfert with Tcode MB1B movement type 311, I haven't got transfert order created.
Somebody could help me?
The material stay in the storage type 921.
Thanck you
Kari

Elmka,
There are several things that could stop the Transfer Order from being created. Please check the following:
Is the source bin blocked due to inventory?
Is the material in unrestricted stock?
If you are transfering partial stock from one Sloc to another, and the stock is maintained in multiple warehouose bins, then SAP may not have been able to determine which bin to select. Test this in the WH activity monitor (Tcode LL01) - there should be an open transfer Requirement. Select it and process in the background. If it errors, try processing it in the foreground and manually select the bin and quantity.
If the stock is in one bin or you are transfering the ENTIRE quantity but the TO still wasn't created, check configuration to ensure auto TO is configured (2 places to check):
>IMG: Logistics Execution > Warehouse Management > Activities > Transfers > Define Movement Types
>IMG: Logistics Execution > Warehouse Management > Interfaces > Inventory Management > Define Movement Types >> LE-WM Interface to Inventory Management - - Here you ensure your IM movement type 311 & 312 are assigned to WM movement types 311 & 312 + have Immediate TO creation set to "A" (automatically in the background)

Movement type 311 is not planned in Back Ground Processing

Similar Messages

Maybe you are looking for