Movement Type 313 Transfer SLOC to SLOC Report

Hi,
Is there are report avaialble in SAP that shows Stock in Transfer. I have tried MB5T and a few others and they don't work. Basically I want to transfer stock from 1 SLOC to anothe SLOC in two steps rather than 1 step hence using 313.
When I transfer the stock in MMBE the material is in stock status Transfer (SLOC) which is fine. What i am looking for is a mass report that shows Stock in Transfer so it can be monitored.
Please note I am not using Stock Transport Orders just the movement types.
Regards
Adeel

Thanks for all your replies. I have already tried/know about the reports you have mentioned in your replies. I was just hoping there was a transaction that shows stock in transfer in slocs but i guess there isn't one.
Regards
Adeel

Similar Messages

Problem in two Step Transfer Posting - Store to Store (Mov type 313 & 315)

If I have posted three material documents against movement type 313. Now against one material document (movement type 313), I can post three material documents of movement type 315.
In short, If I have Stock in Transfer (Store location), then I can post material document (movement type 315) with a material document (movement type 313) against I have already posted material document (movement type 315).
Regards

Hi Leo,
Sorry, your question is not totally clear.
You wrote that you executed three postings of MVT 313. The question is that through how many postings you can receive this stock?
In this case I think the answer is that it depends on the 'stock in transfer' stock you removed from your storage location by MVT 313.
I mean if you posted 10 pcs than you can receive this qty through 10 postings if you receive only 1 pc per posting (MVT 315).
Please clarify your question.
Thanks,
Csaba

Destination plant, description, material are editable for movement type 313

Hello
We are using movement type 313 for the transfer posting between storage location. We use MIGO for the same.
Ideally for the movement type 313, the destination plant and material should not be visible. We enter the material, batch,plant and storage locaiton in "From" side and enter only the storage location in "To" side of the MIGO screen. But now suddently after the EHP4 upgrade, we could able to enter the plant and materil in the "To" side also.
I checked the Field selections in OMJJ for movement type 313 and found that plant and material fields are suppressed.
Do you have any clue on why suddenly i am facing this problem and what could be possible solution.
Thanks
Venkat.

Sounds like you're just dumping your spec here. What have you tried exactly to solve this yourself?
Thomas

Mov. type 313

Hi,
In what situation mov. type 313 will use, what the purpose ?? in t-code MB1B.
Thanks.

Hi Balaji,
The Tcode MB1B is mainly used to enter the stock transfer which can take place between
One storage location to another storage location with in the same plant
One plant to another plant
One Company code to other Company code
The movement type 313 is mainly used when you are trying to do a two stage stock
The movement type 313 removes the stock from the first storage location and in conjunction with this movement type yuo use Movemnt type 315 which in turn places the material in the receiving storage location
When you use the movement type 313 the follwing changes occur
1) Issuing storage location(Originating) unrestricted stock level is reduced
2) Receiving storage location stock in transit level is increased
3) Plant unrestricted stock level is reduced
4) Plant unrestricted stock in transit stock level is increased
Hope this helps you out
In case if you need more infromation do let me know
IF found useful reward accordingly
Thanks & Regards
Pavan

Movement type for transfer of stock from Stock-in-transit to Vendor

Hello,
Is there any movement type for transfer of stock from Stock-in-transit to Vendor.
For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO Modified) -> Delivery (VL04) -> MIGO (Goods Receipt against Delivery) method.
The problem arises when the actual delivery quantity is less then what is entered in the system (due to clerical error). That is, physically less quantity were dispatched and received at the receiving plant. Now the balance quantity is lying as stock-in-transit. To clear it we are receiving the material and using transfer posting for plant to plant transfer. Though physically there is no transfer of goods. Now we do not want to receive the material instead we want it to transfer from stock in transit to the supplying plant. Is it possible ?
Thanks.
Ashish

Hi Ashish,
When You issue the stock, the accounting document is posted . There is no accounting entires when you do Goods receipt at receving plant . In case , we are developing to make it happen , I feel it may have impact on the Material Valuation aspects .
Hence, I feel it is better to adopt any of the following 2 options.
1) Cancellation of the entire delivery and make new delivery or 2) Receive the entire qty at the receiving plant and decide what you want to do with the unavl qty . For example in your case of loss of material due to accident , you can scrap the material in the receving plant itself or return the material back to the sending plant.
Regards
Mani

Reference movement type for transfer in warehouse mgmt

Hi ,
In the warehause management system, IM movement type is link to WM movement type.
Maintenace veiw V_156S_WM ( Table 156SC ). IM movement type 321 has three reference movement type in WM.
396 , 397 , 321 .
Again through table T321 ( veiw V_T321 ) reference Mvt 396 is link to 311 in WM , 397 link to 312 in WM and 321 to 321 In WM.
If i perform 321 movement in IM , then how the system will determine unique reference movement from table
V_156S_WM ( Table 156SC ) .
Thanks
Sanjay

Hi,
The stock tsf ref mvnt type in V_156S_WM(-UMRBL) is:
Reference movement type for transfer in warehouse mgmt
Reference movement type for the second transfer in the Warehouse Management system.
Use
This reference movement type is necessary when a goods movement (stock transfer) in Inventory Management causes two transfers in the Warehouse Management system (stock removal from one storage type and stock placement in another).
Inventory Management movement types that do not initiate any activity in the Warehouse Management System have the reference movement type 999.
The ref mvnt type in V_156S_WM(-RBLVS) is:
Reference movement type for WM from material movements
Reference key for determining the movement type in the Warehouse ManagementSystem.
Use
Each Inventory Management movement type that is relevant to the WM system is allocated to a reference movement type, with which the system determines the corresponding movement type in the WM system.
Using the reference movement type, you can group together Inventory Management movement types that result in the same movement in the WM system.
Inventory Management movement types that do not initiate any activity in the Warehouse Management System have the reference movement type 999.
...sorry, basic help text.
Cheers,
Hein

Reading Additional info for Material Document (Movement Types 313, 201)

Hi SAP Gurus,
I am currently working on a requirement for Material Document Interface.
The Requirement is as below:
(1) The user creates/modifies a material document using MB01/MB03/MIGO for movement types 313 and 201 separately.
(2) The user maintains additional information by creating a NOTE using the option
SERVICES FOR OBJECT --> CREATE NOTE.
(3) To Print the materail document information.
The Approach is followed is:
1) I have to retrieve the Address for From and To Locations respectively along with document data and display it as Simple List output.
Approach:
I retrieved the data from MKPF and MSEG tables respectively.
Also retrieved the data for FROM and TO locations using table TWLAD and function module ADDR_GET.
(2) I also need to retreive additional information created by the user using the option SERVICES FOR OBJECT --> CREATE NOTE.
Approach:
Request your guidance and inputs to solve the point (2) mentioned above.
I have debugged the SAP Standard tcode MB01, MB03 ,MIGO which have the option SERVICES FOR OBJECT --> CREATE NOTE.
I have also used ST05 to trace the transaction to get a proper solution.
But, i was able to observe that only a table SOOD provides the initial required info only which points to a office document type.
Looking forward to your valuable inputs, so that i can retrieve the data entered using the option SERVICES FOR OBJECT --> CREATE NOTE.
Thanks in advance for spending time and
guiding me to deliver the development on time.
With best regards,
Sudhakar

Hi,
Try this..
TABLES: MSEG.
PARAMETERS: P_DATE LIKE MKPF-BUDAT.
SELECT-OPTIONS SO_BWART FOR MSEG-BWART.
SELECT-OPTIONS SO_MATNR FOR MSEG-MATNR.
DATA: BEGIN OF ITAB OCCURS 0,
 MBLNR LIKE MKPF-MBLNR,
 GJAHR LIKE MKPF-MJAHR,
 MATNR LIKE MSEG-MATNR,
 MENGE LIKE MSEG-MENGE,
 MEINS LIKE MSEG-MEINS,
 END OF ITAB.
SELECT AMBLNR AMJAHR BMATNR BMENGE B~MEINS
 INTO TABLE ITAB
 FROM MKPF AS A INNER JOIN MSEG AS B
 ON AMBLNR = BMBLNR AND
 AMJAHR = BMJAHR
 WHERE A~BUDAT = P_DATE
 AND B~BWART IN SO_BWART
 AND B~MATNR IN SO_MATNR
 AND B~MENGU = 'X'.
The field MENGU might be used to check if the
material movement has affected the stock..
Also I have used posting date = given date in P_DATE..
LOOP AT ITAB.
 WRITE: / ITAB-MBLNR,
 ITAB-GJAHR,
 ITAB-MATNR,
 ITAB-MENGE,
 ITAB-MEINS.
ENDLOOP.
Thanks,
Naren

Movement type 453 (Transfer posting to own stock from returns from customer

Hi all,
I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
it picking from from profit center from in material master under sales:general/plant tab but we need picking from based on account assignment group in the material maser sales org.2.
Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
K.Satish

Hi,
In Co controlling are the automatic account assignment is only the default and it on the Priority.
if you think what is picked up from the mm is wrong.
the best way out will be to go with the substitution rule.
based on the movement type use the rule.
hope this is clear , assign points.
With regards
Krishna

Movement type 313 and 315 with special stock K.

Hi,
I would like to post a movement type 313 and 315 with special stock k (consignment) but it is not possible. Also i have tried to create a new movement type (OMJJ) coping 313 and trying to set stock special k in somewhere but I couldn't.
it is possible a movement type 313 K or 315 K?
Thanks in advance.
Anna

Hi Anna Barnils ,
Not possible.
Read the below help:
SproMMInventory Management and Physical InventoryMovement TypesClick on the help infront of Copy, Change Movement Types and check movement types 313 / 315
Regards
Ramesh Ch

Movement type 313 and 315 with Special stock indicator Q requirment

Hi Gurus,
We have the business requirement to use the Mvt 313 and 315 with special stock Q (two step stock transport for storage Location to storage location transfer). But when we are trying to use the t-code MB1B with MVt 313 with Q its not available. We know its because of SAP standard.
Also we suggested to use the Mvt 411 Q but users wants the 313 /315 with Q from moving the project stock by storage location to storage location and received the update as below.
We have looked into the option of transferring the project stock to plant stock. Unfortunately, as well as being transaction-heavy and prone to manual errors, this has accounting implications. So, we need to be able to action the two-step transfer on project stock via the enhancement described in the SAP documentation.
http://help.sap.com/saphelp_rc10/helpdata/en/0f/03df3a89ec880ee10000000a114084/frameset.htm
The link is specific to PM config . Could any one can suggest me how to handle this one to do with 313 and 315 with special stock type Project (Q) to transfer the stock by two step transfer.
Thanks,
Sada

It seems you have to activate business function set LOG_EAM_ROTSUB (transaction SFW5). After that the customizing node will be available:
SPRO > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Orders > Functions and Settings for Order Types > Goods Movements for Order > Movement Types for PM/CS Orders
(transaction: DI_0MVTPM)
http://help.sap.com/erp2005_ehp_04/helpdata/en/a0/00e93a2876a81ae10000000a11402f/frameset.htm
Edited by: Csaba Szommer on Jan 10, 2012 11:39 AM

Mov Type for Transfer Posting ?

Hi,
What is the movt type for transfer posting
a) Quality Insp Stock to Block Stock ?
b) Block Stock to Unrestricted use stock ?
Regrds,

Hi
350 movement is used for stock trasfer from QI to Block
350 Transfer posting blocked stock to QI stock - reversal
Vishal...

Movement type for transfer posting wbs to normal stock

which movement type used for asset trasferred from wbs(special stock) to normal stock

Dear,
i hope u have created asset as a material,
trasferred material from wbs(special stock) to normal stock--310 Q(Transfer posting project material to material - reversal)
312 Q(Transfer posting stor. loc. (one-step) - project - reversal).
Regards,
Gopala.S

Batch Determination in movement type 313 or 311

Hi Team
I am trying to enable automatic batch determination for movement type 311 and 313. Have done the setting for match search strategy in IM. But do not see any tab for batch determination in MB1B or MIGO

You have to define Access Sequences for Plant/MVT Type & strategy types for the inventory mgt followed by maintaining the condition records for the same.
Thanx!!

Control delivery type for mvt type 313

Hi
Regarding SLOC to SLOC transfer postings, I have a couple of questions:
Using movement type 313 (unr. use stock SLOC to SLOC) in our SAP system automatically creates a delivery in the background. Where can I configure what delivery type I would like to use for this purpose? Also, is there any settings I can do for ATP checks for this? I believe this is standard SAP functionality so a IMG menu path would be very much appreciated.
Brgds,
Lars

Thanks.
However, I am not sure that helped me very much.
What we would like to do is to achieve a scenario where we move stock that is in QI and Blocked stock, in a similar way as with movement type 313. I am not even sure that is possible to do with a delivery? We use the deliery generated from movement type 313 to send with IDOC to one of our 3PL warehouses, managed by another company.
When I look at it, I can find movement type 325 to move Blocked stock from one SLOC to another, but is it possible to do with a delivery (generated in the background)?
Brgds,
Lars

Limit movement type plus SLoc by User

Dear All,
I face a problem right now, I know that SAP could restrict a use on movement type and Sloc. But when I try to combin them I face a problem. For example:
I will only like to allow A user to use movement type 261 and 262 in SLOC 0100 and 311 in Sloc 0200. Could I do a setting for it? Currently, my setting allow User A to have 261,262,311 in both Sloc 0100 & 0200.
How can I set up this restriction. Currently, the warehouse is now enable. So could I have some other method of getting it done?
Thanks
Beh

As i understand SAP Standard will not have authorization movement type and storage location specific. If you have authroization of storage location 0100 and 0200 the user will be able to use for all the movement types he has authorization. May be you can do enahcement using exit/badi (MB_MIGO_BADI or may be enhancement spot) by creating z table with user id, movement type and storage location. while posting a goods receipt or issue if the entry does match in the z table it should throw error.
Not sure if WM allows a work around.
Regards
Sangeeta

Movement Type 313 Transfer SLOC to SLOC Report

Similar Messages

Maybe you are looking for