Movement type 453 (Transfer posting to own stock from returns from customer

Hi all,
I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
it picking from from profit center from in material master under sales:general/plant tab but we need picking from based on account assignment group in the material maser sales org.2.
Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
K.Satish

Hi,
In Co controlling are the automatic account assignment is only the default and it on the Priority.
if you think what is picked up from the mm is wrong.
the best way out will be to go with the substitution rule.
based on the movement type use the rule.
hope this is clear , assign points.
With regards
Krishna

Similar Messages

Mov Type for Transfer Posting ?

Hi,
What is the movt type for transfer posting
a) Quality Insp Stock to Block Stock ?
b) Block Stock to Unrestricted use stock ?
Regrds,

Hi
350 movement is used for stock trasfer from QI to Block
350 Transfer posting blocked stock to QI stock - reversal
Vishal...

Movement type for transfer posting wbs to normal stock

which movement type used for asset trasferred from wbs(special stock) to normal stock

Dear,
i hope u have created asset as a material,
trasferred material from wbs(special stock) to normal stock--310 Q(Transfer posting project material to material - reversal)
312 Q(Transfer posting stor. loc. (one-step) - project - reversal).
Regards,
Gopala.S

Create a subsequent Goods Movement for a transfer posting

Hi Team,
I have a scenario where the users will create a Good Movement document for transfer posting. The Stock of Material "A" is transferred to stock of Material "B" using the movement types 561 etc. Now the quantity is reduced from unrestricted stock of "A" and posted to "Stock in Transfer/Transit" of "B". The requirement is to create another Goods Movement document immediately after the above transfer posting is completed and use movement type 101 to post the same quantity to unrestricted of "B".
I tried searching for use exits and could not find a relevant one "After Save" for goods movement online transaction. I found the MB_GOODS_MOVEMENT_UPDATE Badi but don't know how to create another goods movement document while in the update task. I'm concerned that if I call a BAPI or BDC inside the update task, it might conflict with the current transaction (transfer posting). Looking for your guidance.

Hi Deepali,
You can use the userexit ' ZXMCBU02 ' to write your own code. This user exit gets triggered for almost all the goods movement transaction.
There is also a very similar BADI which you can use which gets triggered for every goods movement transaction.
I would like to know the BADI feel free to let me know. I think the above user exit should server your purpose.
Hope this is useful for you.
Cheers
VJ

Transfer posting of subcontracting stock with mvt type 541 from project stk

Hi,
we run project MRP and the requirement is raised for subcontracting item also ,after converting the PR into PO when I try to transfer post material in MB1B using 541 ,system shows Error Purchase order does not contain any item even I have material in my project stock,what may be the reason?
Regards
Kantha

Hello Kantha,
The components which you provide for a vendor are manged in a vendor-related special stock, O. This stock is updated at plant level, becuase material is actually not in your plant. If you want to provide stock to vendor the avialble stock types in subcontracting are from un restricted use and in quality inspection.
When you provide componets to vendor via transfer posting this needs to go from only unrestricted use stock to the stock of material provide to vendor movement type is 541.
So to execute the transfer posting for the stock of material provided to the vendor, you have to specify special indicator O, if not the transfer posting will not differ from normal transfer posting.
Also T-code MBLB will help you in evaluating the stock of material provided. So you need to transfer the stock from project stock to unrestricted stock to carry out the transfer.
Br,
Tushar

Movement type for transfer of stock from Stock-in-transit to Vendor

Hello,
Is there any movement type for transfer of stock from Stock-in-transit to Vendor.
For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO Modified) -> Delivery (VL04) -> MIGO (Goods Receipt against Delivery) method.
The problem arises when the actual delivery quantity is less then what is entered in the system (due to clerical error). That is, physically less quantity were dispatched and received at the receiving plant. Now the balance quantity is lying as stock-in-transit. To clear it we are receiving the material and using transfer posting for plant to plant transfer. Though physically there is no transfer of goods. Now we do not want to receive the material instead we want it to transfer from stock in transit to the supplying plant. Is it possible ?
Thanks.
Ashish

Hi Ashish,
When You issue the stock, the accounting document is posted . There is no accounting entires when you do Goods receipt at receving plant . In case , we are developing to make it happen , I feel it may have impact on the Material Valuation aspects .
Hence, I feel it is better to adopt any of the following 2 options.
1) Cancellation of the entire delivery and make new delivery or 2) Receive the entire qty at the receiving plant and decide what you want to do with the unavl qty . For example in your case of loss of material due to accident , you can scrap the material in the receving plant itself or return the material back to the sending plant.
Regards
Mani

Movement type 453

Hi Experts,
What processes need to be completed before doing a transfer posting with movement type 453?

Hi,
The 453 Movement Type, unlike most Transfer Postings, is actually the point in the process, when the Stock becomes valuated, because the stock is transferred from Returns Stock (Unvaluated) to Unrestricted Stock (Valuated).
This may be a summary of information which Arvind already knew, but hopefully it is informative for some of you.
for more clarity refer the below links...
Map new movement type to replace 651+453.
Mvt type 453 and 454
Regards,
Udaya.

Transfer Posting of Restricted stock Plant to Plant

Hi,
How to do transfer posting of restricted stock Plant to Plant
Kunal

HI
One step stock transfer from one plant to another is 301 movement type.. Remember the stock should be in unrestricted use. If it is in quality and or blocked the same will not work
2 step process is 303 and 305
From Stock transfer order Documnt type UB with item category as U. Movement type used is 351 and 101

Movement 415 Q- transfer posting project to project

In case of movement 415 Q- transfer posting project to project, I want to change the accounting entries.
As per the business need, it is decided that for some cases where excess stock is available in one project that can be transfered to other project without cost. Hence in some cases I need to cancel the accounting posting done by movement 415 (Q) so that only quanity is transfered to other project.
Is this feasible with the help of development ?

Hi,
Whenever you procure materials against Project 'A', cost will be booked against the same project. If project is completed & still u've excess materials which u want to issue to some other project 'B', U can use std SAP movement type 415Q. By using this, cost which was already booked against project 'A' will be transferred to project 'B' to the extent of materials cost issued to project 'B'. Accounting documents represents the same.
But your requirement is : excess stock of project 'A' should be transferred to project 'B' with out value flow. That means.... Cost will be still lying with project 'A' for the excess materials issued to project 'B' though those materials are not consumed against project 'A'. And also the cost booked against project 'B' will be lesser than the actual spent. (bcoz these materials cost will not get added to project 'B' cost)
Finally total cost of both project 'A' & 'B' will have wrong figures, which is not a correct practice.
Thanks
Kishore

Reference movement type for transfer in warehouse mgmt

Hi ,
In the warehause management system, IM movement type is link to WM movement type.
Maintenace veiw V_156S_WM ( Table 156SC ). IM movement type 321 has three reference movement type in WM.
396 , 397 , 321 .
Again through table T321 ( veiw V_T321 ) reference Mvt 396 is link to 311 in WM , 397 link to 312 in WM and 321 to 321 In WM.
If i perform 321 movement in IM , then how the system will determine unique reference movement from table
V_156S_WM ( Table 156SC ) .
Thanks
Sanjay

Hi,
The stock tsf ref mvnt type in V_156S_WM(-UMRBL) is:
Reference movement type for transfer in warehouse mgmt
Reference movement type for the second transfer in the Warehouse Management system.
Use
This reference movement type is necessary when a goods movement (stock transfer) in Inventory Management causes two transfers in the Warehouse Management system (stock removal from one storage type and stock placement in another).
Inventory Management movement types that do not initiate any activity in the Warehouse Management System have the reference movement type 999.
The ref mvnt type in V_156S_WM(-RBLVS) is:
Reference movement type for WM from material movements
Reference key for determining the movement type in the Warehouse ManagementSystem.
Use
Each Inventory Management movement type that is relevant to the WM system is allocated to a reference movement type, with which the system determines the corresponding movement type in the WM system.
Using the reference movement type, you can group together Inventory Management movement types that result in the same movement in the WM system.
Inventory Management movement types that do not initiate any activity in the Warehouse Management System have the reference movement type 999.
...sorry, basic help text.
Cheers,
Hein

Movement type 313 and 315 with special stock K.

Hi,
I would like to post a movement type 313 and 315 with special stock k (consignment) but it is not possible. Also i have tried to create a new movement type (OMJJ) coping 313 and trying to set stock special k in somewhere but I couldn't.
it is possible a movement type 313 K or 315 K?
Thanks in advance.
Anna

Hi Anna Barnils ,
Not possible.
Read the below help:
SproMMInventory Management and Physical InventoryMovement TypesClick on the help infront of Copy, Change Movement Types and check movement types 313 / 315
Regards
Ramesh Ch

New account modifier for movement type 453

Hi,
I want to define new account modifier ZZZ in addition to the existing account modifier VAX for the account key GBB and movement type 453. Using SM30 i tried to update new entry in V_156X_VC but it is giving the error "Target key must be different from source key"
Regards,
Guru

hi
Thanks for your reply.
When We do sales delivery (Movement type 901) .Normally system will take the Account key (GBB) and account Modifier(VAX) .But as we are doing Free of charge delivery GL account(Eg 1000) should be different we defined account modifier ZZZ.When we take the sales return for free of charge , movement type 453 will be triggered and account key (GBB,VAX) (VAX will have different account Eg.2000) .As GL account should be 1000 we want to create new entry 453,gbb.zzz
Regards,
Guru.

Do the customer return thruu2019 movement type 655 it goes to quality stock.

I m facing problem regarding 655 movements type.i m not activate qm view for that material . still i m getting lot .whenever they do the customer return thruu2019 movement type 655 it goes to quality stock
plz help me

Which Inspection type's lot is getting generated?
I presume its 05 inspection type.Either remove this inspection type or in customization in QCC3 >Inspection during shipping->change the customization for sales order type & mvt type .

Transfer posting to block stock through quality notification

Dear QM Experts,
I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
1.     Material is batch managed
2.     Storage location is managed by warehouse management and has storage bin.
3.     Material has split valuation
When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
I would be grateful, if someone can throw some light on this.
Thanking you,
Anand Rao

Which valuation category do you use in material master accounting view?
In my experience..
Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
Anyway try below..
At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
I'm not sure why your batch master does not have a valuation type.
Regards
Luke

MB1B transfer posting error "SL stock in transfer exceeded by 20 PC."

Hi All,
I'm doing a MB1B transfer posting for my materials from 1 storage location to another using movement type 311,
but some of the materials I encountered this error.
"SL stock in transfer exceeded by 20 PC : 'Material name' 'Plant' 'Stor. Loc' "
I went to MB5T to check the materials if it's in the stock in transfer, but they are not in the list.
I've also check in MMBE to check the stock value of these materials, it shows 100 in unrestricted use which is more than what I'm transferring.
May I know what have i missed checking?
Please help and thank you.

Hi There
Seems you are trying to do the One step Transfer between locations (311), So it is not required to look into the 313, 315 steps (Stock in trasfer, Removal and palce in transfer)
From the Suppling location these Material and Batch is reserved for some purpose(261 or 201) and these material may under Dynamic Availability Check, In this case even if you have the stock in Location if it is hard allocated for some other purpose you cant use this qty
Please check the above settings.
Thanks
Senthil P

Movement type 453 (Transfer posting to own stock from returns from customer

Similar Messages

Maybe you are looking for