Movement Type Change From 321 to Some other In Stock Posting (Insp Type 05)

Hi,
    While doing the stock Posting From quality to Unrest - Automatic 321 Movment type is happening
    But my client neads to identify how many qty from custmer return is passed to unrestricted from       
    quality.
   i have problem in identify since 01 and 04 and also 05 all are having the same mvt since it is automatic
Can it be possible to chnage the mvt for the particular Inspection type 05.
kindly give me is there any way to solve this issue.
Regards
jai

Dear jaikumar
No need of changing movement type for the same. You have too many options to get this fugure
You can use Tcode se16, se16n and in the table QALS you will be able to know the quantity posted to unrestricted by selecting 05 inspection and from to date in input for the table view
else go to the standard report . Tcode MCXC, MCXI you will get the report based on inspection type and period
Regards
gajesh

Similar Messages

  • How to move the changes from one system to other without using CMS

    Hi
    In our project they are migrating NWDI 6.40 to NWDI 7.0.
    During migration CMS won't be available.
    Could you plesae tell what are the different options are there to move the WebDynpro changes from (NWDS) Development to Quality system and then production system without using CMS server?
    If i will create a development package and import this packgae in Quality package will my new changes also be available in Quality server?
    Thanks & Regards
    Susmita

    Hi Susmita
    I wasn't completely sure, but from your description of your problem, it seemed like you would have access to your DTR during your upgrade. The following solution assumes as much. If this is not the case, you'll need to do things slightly differently, but the solution will still be possible.
    Depending on the scope and size of your changes, it may be practical for your developers to deploy directly from their NetWeaver Developer Studio (or for a designated administrator to install the NWDS and do the same). To do so, from the Development Configurations perspective, create a new NWDS project for each of the DCs you want to deploy. Then right-click the project and choose from one of the deployment options. (Deploy new archive and run will allow you to see if your deployment has taken effect.) When deploying, the target server is the one set up as your J2EE engine in the NWDS properties - you'll consequently have to modify this when the target server for your deployment changes (from QA to production, or vice versa).
    Note that this is only applicable in certain situations, and only as a short term stopgap measure. This sort of practice - developers or administrators deploying haphazardly to servers other than those intended for development - is precisely what the NWDI is designed to prevent (and is one of very few things it's fairly good at doing). For instance, if your QA and production systems are attached as TEST and PROD runtimes systems respectively in your NWDI, a full assembly and subsequent full deployment would usually occur to these servers when deploying with the NWDI. This is a much stronger guarantee of consistency than the build that will be performed within your local NWDS to deploy your changes. (Conversely, the rigidity of the assembly is perhaps the NWDI's greatest design flaw.)
    (Also, Snehal: thanks for the information on the sapmake_util blog. It's not something I've encountered before and looks very useful.)
    James

  • Restore the backup from tape to some other server

    Dear All,
    I need to restore the backup from tape to some other server.PLease suggest the command and setp to do that.
    Regards,
    Kumar

    Hi,
    I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
    allocated channel: t1
    channel t1: sid=2386 devtype=SBT_TAPE
    channel t1: Data Protection for Oracle: version 5.4.1.0
    Starting restore at 09-MAY-10
    channel t1: looking for autobackup on day: 20100509
    released channel: t1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 05/09/2010 11:57:01
    ORA-27191: sbtinfo2 returned error
    Additional information: 2
    RMAN>
    Thanks,

  • How to move downloaded files from download folder to other relevant folder or how to download files in relevant folders other than download folder

    how to move downloaded files from download folder to other relevant folder or how to download files in relevant folders other than download folder

    Just drag the file from the Download folder to the folder of your choice in Finder. If you are using Safari you can designate a new default download destination in Safari>Preferences>General tab, 'Save Downloads to...'. Other browsers should have a similar option in their preferences.

  • How to move BCS data from one box to other

    Hello Expert,
    Dose any one know how to move BCS data from one box to other box ?
    Thanks & Regards,

    1) The best is to do the test. In my case, my customer was just doing this transfer (in full) to perform tests on the BEX reportings. Actually, they never raised any issue regarding document number when they did additional postings in test system... I would also say that during the transfer, the number counter in Qual gets not synchronized with the one in Prod. So, I think the system will just take the next number available in Qual. Should not be an issue.
    2)  As explained in answer 1), in my case, the purpose was not to perform data migration from one system to the other one. Thus, my customer never performed a subsequent consolidation in the target system. But, basically, the transfer copies all data : posting levels 00 to 30, for all periods you have selected + Additional financial data and sequence of activities. Thus, for me, everyhting is available in the target system, including COI documents. In other words, the "picture" regarding the data should be exactly the same between both system. The only thing you need to pay attention to is the customizing : it must be the same in Qual and Prod (example : date of acquisition and divestiture, structure of the group, etc...).
    Another very important thing, is that your export data source must not be enriched due to the BCS Delta load scenario. If it is the case, the system will write the consolidation logic (i-e the consolidation group + reporting mode) when transferring the data from the source Real Time Infocube to the Target Real time infocube, which will lead to inconsistent data in the target system.

  • HT4914 My music is stored on an external hard drive. All music that I buy, whether from itunes or some other provider, automatically gets loaded onto my external drive. There is some music on my computer drive as well. Will match work in this circumstance

    My music is stored on an external hard drive. All music that I buy, whether from itunes or some other provider, automatically gets loaded onto my external drive. There is some music on my computer drive as well. Will match work in this circumstance?

    I followed all the instructions for consolidating my music into one folder on my external hard drive. (I'm struggling with this because my ext HD was renamed when I synched my iPod shuffle last night. The "E:" drive has now become the "F:" drive and all my songs have those dreaded exclamation points next to them. Exploring my computer, I found "My music" folders in two place on my C: drive and one place on my external hard drive... and the song list in each place is different.
    Argh.
    So... following the directions in the article reference here, I attempted to consolidate all of my songs into one folder on my external hard drive.
    But.. I checked the song list when the "consolidation" was complete... and MANY songs are missing. They're still on the C: drive, but don't appear to have been copied to the new folder on the ext HD.
    I would appreciate any suggestions.
    Thanks so much!
    Edit: I tried to reassign the ext. HD a permanent letter, but my Control panel does not appear to offer the option of Administrative tools. Is there an easy way to get to this, as this seems to be the root of the problem?
    Thanks.
    Message was edited by: hbdivegirl

  • Move a circle from one place to other with a desired speed

    My motive is to move a circle from one place to other with a
    desired speed.
    For that what should I do.
    Thanks
    rajakvk

    Thanks for that post.
    I am new to actionscript & actually I am developing my
    first simple game in
    flash. For that I need a function like pauseMovie(seconds). I
    am planning to
    call this function within another function. Also I expect
    this function
    pauseMovie(seconds) should use system clock to calculate the
    time delay.
    thanks
    rajakvk
    "sneakyimp" <[email protected]> wrote in
    message
    news:e3c92l$1ni$[email protected]..
    > suppose that you have put your circle into a movie all
    by itself. suppose
    > further that the circle is perfectly centered in the
    movie it lives in and
    > that
    > movie is on your stage with instance name myCircle and
    its xposition is 5.
    >
    > put this actionscript in your main movie
    >
    > var circleSpeed:Number = 10;
    > var destX:Number = 400;
    > this.onEnterFrame = function() {
    > myCircle._x += circleSpeed;
    > if (myCircle._x >= destX ) {
    > delete this.onEnterFrame;
    > }
    > }
    >
    >

  • Passing Record type parameter from one session to other session

    Hi,
    I have a package.procedure, in that I am calling custom workflow, inside this workflow again I am calling
    same package.procedure (Its an recursive call)
    I need to pass record type parameter in this package.procedure.
    I tried with global variables but Workflow starts its new session so it losses all variables.
    Now I am going with creation of Custom table.
    Please advice, is there any way other than creation of Custom table.
    I mean can we pass Record type parameter from one session to other session without creating table.
    Regards
    Rohit

    Al-Salamu Alikum We Rahmatu Allah We Barakatu...
    want this place from to be passed as a parameter to the shipping bill form..... using web.show_documentwhy don't u think of just passing data parameter or global parameters from one form to another
    Pass global variable between two forms.
    Hope this helps...
    Regards,
    Abdetu...

  • MRP type change from VB to PD - Problem in old requirements MD04

    Hello Experts,
    For MRP run we were using VB as MRP type in material master. We upload schedule in scheduling agrrements. At time of MRP run system was only considering based on reorder point only.
    Now business disicion is change and we have changed MRP type as PD. So at time of MRP run system should consider based on requirements i.e. from scheduling agreement. Now here is our problem. System consider and shows old scheduling requirement also in MD04. Let me explanin you in detail. Before changing MRP type from VB to PD, there were some schedule  available in system. after that we have uploaded 2 3 more schedule. But system still shows old schedule availabe at time of MRP type change.
    Can you please help me how to resolve this?? How can we clear old requirements from system.
    Thanks in advance for your reply.
    Regards,
    Piyush

    Hi,
    Not too sure but , try # SDRQCR21
    Regards
    Chandrasekhar

  • Latency type changed from fast to interleaved

    My Latency type as changed from Fast to Interleaved, why?
    From - Latency type: Fast
        To - Latency type: Interleaved
    Can it be changed back to fast ?
    Since it as changed, it feels like my broadband is now being capped. It as become slow  .5mb when usually I was getting 1.9mb.
    ADSL Line Status
    Connection information
    Line state: Connected
    Connection time: 3 days, 11:47:08
    Downstream: 19,661 Kbps
    Upstream: 1,164 Kbps
    ADSL settings
    VPI/VCI: 0/38
    Type: PPPoA
    Modulation: G.992.5 Annex A
    Latency type: Interleaved
    Noise margin (Down/Up): 2.6 dB / 6.2 dB
    Line attenuation (Dwn/Up): 22.0 dB / 10.9 dB
    Output power (Dwn/Up): 0.0 dBm / 12.3 dBm
    FEC Events (Down/Up): 117943179 / 717
    CRC Events (Down/Up): 220069 / 238
    When using Facetime,the conversations on the devices have become very broken!!
    Thank you
    Solved!
    Go to Solution.

    I did a quiet line test and the result was Ok, no noise on the line.
    Here are my stats including the hidden errors:
    ADSL Line Status 08:43 on the 13/03/2013
    Connection information
    Line state:
    Connected
    Connection time:
    0 day, 19:38:32
    Downstream:
    19,075 Kbps
    Upstream:
    1,197 Kbps
    ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    3.4 dB / 5.9 dB
    Line attenuation (Down/Up):
    22.0 dB / 11.0 dB
    Output power (Down/Up):
    0.0 dBm / 12.7 dBm
    FEC Events (Down/Up):
    18336078 / 133
    CRC Events (Down/Up):
    78366 / 37
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    10689528 / 29
    Error Seconds (Local/Remote):
    0 / 17

  • Reg : Procurment  Type Change From F to X

    Hi,
        Can we able to change the Procurment Type From F to X  in MRP 2 View ?

    I dont think so, a material once declared as externally procured, cannot be change to both.
    regards,
    Sudhir

  • Movement of material from one plant to other within the same country

    Hello,
    I would like to move material from one plant to other via tran MB1B.
    The system generates the following error while trying to save document :
    Account determination for entry BAS1 BSX 9000 ___ C100 not possible
    The system did not find an account for this transaction. This means that the account determination for key BAS1 BSX 9000 ___ C100 is not maintained in MM Customizing (Valuation). The key is made up of:
    Chart of account
    Transaction key (= Posting transaction)
    Valuation grouping code
    Account grouping code
    Valuation class
    System Response
    The system cannot update a G/L account for this transaction. You cannot post the transaction.
    Can you please tell me where the necessary setting should be made.
    Thanks

    Hi
    Please check the confirguration in OBYC for this combination and assign GL account for this combination of Valuation class, Valuation area.
    Regards,
    Lakshmanan Krishnan

  • One computer with 2 accounts-how to move an iPad from one to the other.

    imac with 2 accounts-how to move an ipad from one account to the other account

    Yes it is possible using PAPI. I have just used PAPI to create instances . I have not tried the requirement which you want. But as per my knowledge it can be done.
    Good Luck
    Right Chord

  • I have an iPad and an iPad mini, I want to move my photos from one to the other how do I do this?

    I'm struggling to move my photos from one iPad to another. I don't have a device to do like you tube shows, can this be done on iCloud?

    Transferring info from your current iPhone, iPad, or iPod touch to a new device

  • How to move supporting details from one intersection to other?

    Hi,
    I want to move data from one intersection to other along with supporting details and comments. Now i want to delete everything (data, supporting detail and comments) from previous intersection. I know how to clear data but do not know how to delete comments and supporting details form that intersection.
    Can you help me with this?
    Thanks!

    I have found it.
    Thank
    Its Adminstration -> Clear Cell details..

Maybe you are looking for