Movement Type Data is missing

Hi experts,
Can some one tell me why i am not getting Movement Type data in the inventory cube 0IC_C03 after loading from 2LIS_03_BX,2LIS_03_BF,2LIS_03_UM infoSources ??
The thing i don't understand is i can see data for Movement Type in the PSA but not in the cube ?
Thanks a lot
B

Hi,
I never see the the characterstic for holding the Movement Type information. I mean to say, there is no characterstic(for example 0MOVETYPE) in Info cube 0IC_C03. Thats why your not able to see the informatin regarding Movement Type .
Try this:
Enhancing(including 0MOVETYPE)the cube.Enhance the DS 2LIS_03_BF only. It does not make sense to enhance the DS 2LIS_03_BX to have the stock initialization with respect to movement type.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Movement Type data is not Showing in IW39 tcode

Hi,
We run the T.Code IW39 for Single Plant...Output showing correctly....
But after select whole output, we goes in Environment --> Goods Movements path...but after this, No objects were selected..even i select all the output comes after execution...
For other Plant, movement type data is coming.... Please help me out of this...
Regards..

Hi,
'No objects were selected' status message appears when you have not selected the order against which any goods movement have taken place. may be with your other plant there are few orders against which the goods movemements have been recorded in the system.
you can better be ensured by selecting the particular order against which goods movement have been carried out.
Regards,
Lucky.

Missing movement type data in 0IC_C03 cube

Hi Gurus ,
i have deltas running for 0ic_c03 cube in B1 7.0 i have used transformations for loading cube .
In a report of this cube for plant material stock, i can c the quantities matching with MB51 report of R/3 where as the values are not matching for sum material ( negative stock values with 0 qtys )
i found that a movement type 121 data is missing in BW
i have read thread on the forum suggesting to work on OMJJ transaction and make 121 movement type as statistics relevant.
But i want to know how this action will effect on R/3 update controlling ?
any inputs will b a grt help
Edited by: Rajesh Dalwadi on Jan 13, 2009 12:09 PM

Hi,
We faced lot of problems with missing movement type, fo that we taken correct confirmation from MM team and then added it in Update Rules and deleted the data in Cube and then Re-Initialized the Cube.
To do this, you need ECC Down Time. I'm talking about BW 3.5. I think in BI7, it may be easy, (without taking down time, pls check).
Thanks
Reddy

Movement types data not capturing from BW cube data load

Dear Experts,
We are supporting BPC 10.0 Netweaver consolidation activities.
As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
ZFIGl_CA10 : From this cube the YTD closing balances of the balance sheet items are captured.
Opening balances are copied from the last period of the previous year through balance carry forward.
For a balance sheet itens, we are getting the F99 closing balances correctly captures.
But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
No modifications are done for both the file.
Please find the below attached screen shot and kindly help me on the same.
Regards,
Shilpa

Hi Shilpa,
I had the same problem in mi last consolidation implementation and the solution in this case was
implement all the data flow for the 0FI_GL_014,
Regards,
Mario

Data loading problem with Movement types

Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AM

Hi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna.

Regarding Movement types in Inventory dataloading

Hi Experts,
I have loaded the data for Inventory management cube 0IC_C03.
while doing validation some materials are matching and some are not matching,and i found the issue in BI i,e some of the movement types 101,102are missing in BI.
can anyone of please guide me the step by step for inventory dataloading.So,that i will reload the data and check.
Please do the needful.
Thanks
lakshmi

Sorry!! It's not clear what you are saying
What I understand is : you are not able to see Mov types = 101,102 in Cube ... right?
Did you check in PSA as mentioned in my earlier post ?
Check start routines if any are filtering Mov types = 101,102

Movement type for production supply missing in warehouse

Gurus,
I am getting this error when i use TC-LP11
movement type for production supply missing in warehouse
What should be done?

All I can suggest is checking the master data:
Must have at least one Prod. Supply Area and one control cycle set up.
PSAs are part of the WM-PP interface and are created in WM and are used to group together Work Centres (which are Production master data).
Created under application menu:
Logistics/LE/Master data/Warehouse/Production Supply (Tx LPK1/2/3 see also LS41) and assigned to Work Centres under application menu:
Logistics/Production/Master data/Work centres/Work centre/Change (Basic data view).
(To find out the PSA aka Supply Area from Process Order Display Tx select: Goto \ List \ WM Picklist and scroll to right)
A Control Cycle defines for a given material, Plant and PSA:
which WHS to get the material from
which interim storage type to take it to
which bin to place it in (can be dynamic for pick parts)
Logistics/LE/WM
Master data/Control cycle record/Create
Regards,
Nick

Classification Data (SLED) not Updated for Movement Type 561

Dear All,
I have noticed that after uploading the opening stock with movement type 561, the Classification data (Date of manufacture & Shelf Life expiry date) which was captured in MB1C is not updated in the batch master in Classification Tab.
Is this standard SAP behaviour for 561 movement type? Or is there any config is missing?
Please advise.
Regards,
Suresh.

Hi Suresh,
For your question I understand that while uploading the initial balances, system didn't ask you for the Manufacturing date or total shelf life date. Following is the solution:
You have to maintain "Check SLExpir.date" and "Classif.batches" indicators for the movement type 561 or any movement type you required. This customization can be perform through SPRO>>MM>>IM>>Goods Mvt. and mvt. No.
Also activate SLED at plant level in customization.
Regards
SAK

Extracting Movement type wise data(MSEG) based on posting date from 0IC_C03

Hi Experts,
I have implemented 0IC_C03 in devlopment client and preparing a Physical Inventory report.
I want to know if I can directly extract the fugures such as Process Loss, Sales, Sales Return, Transfer In and transfer out from the cube 0IC_C03 so, my question is ...
Is it possible to extract the movement type wise data as in MSEG from any KF of 0IC_C03 ?? If its possible which particular KF should I use from the cube ??
Please respond at the earliest.
Thanks,
Romil

Hi,
You can extract 0RECTOTSTCK & 0ISSTOTSTCK from 0IC_C03 but you need put corresponding Movment type for each
you can't put 0TOTALSTCK, it is Non-cumulative key fig,
even all key fig except Non-Cumulative key Fig like (0TOTALSTCK , 0VALSTCKQTY , 0VALSTCKVAL.....) can be extracted
Best Regards
Obaid

Subasignment and Movement types in Data colletcion

Hi
How to upload reported data first only with all subasignment (Trading Partner, Segment, other Customs) but without Movement Types (MT) and after this load again but only with MT?
If we do in that order we have double value for item. BDC reguired value for subassignments. For MT it's not necessary to provide ifnormation with other subasignments.
Sholud we use AFD function for that or there is other way to do this.
Thanks,
Pawel

Thanks Dan
1. Beacuse BDC are required and MT can not be upload with other subbasignements we must use double values - but when we have doubled values on item (one with subbasignements, other just only with MT) is correct for further BCS process (CoI, IU Eliminations, Reclasyfication, Currency Translation) ?
2. What about posting MT on statistical items? I mean first upload reported data with subbasignements (without MT) on BS items and then upload MT on statistical items (statisticla items = BS items created as statistical. In our case Equity and Investments are posted in one upload with MT and other subbasignments, so for CoI should be correct (read from Total Record)?
regards,
Paweł

Movement types in a date range

Hi All,
I need to get all the movement types occured in date range for a material.
I got movement types for material form MSEG but i need to specify within date range.
Plz suggest.
Thanx
Rohit

try it like this: you will get the movement type between this date & time range from mseg
Select a~BWART
into table t_itab
from mseg as a inner join mkpf as b
    on a~MBLNR eq b~MBLNR
   and a~MJAHR eq b~MJAHR
where b~BLDAT between l_BLDAT     and h_BLDAT
   and b~CPUTM between s_time-low and s_time-high.
or you want to check for a single movement type than
Select single a~BWART
into w_bwart
from mseg as a inner join mkpf as b
    on a~MBLNR eq b~MBLNR
   and a~MJAHR eq b~MJAHR
where b~BLDAT between l_BLDAT     and h_BLDAT
   and b~CPUTM between s_time-low and s_time-high
   and a~BWART eq p_BWART.
if sy-subrc <> 0.
Endif.
With luck,
Pritam.
Edited by: Pritam Ghosh on Feb 3, 2009 4:42 PM

Disable Shelf Life Expiration date for Movement Type 311

Hi All,
Whenever we run the transaction MB1B with the movement type 311, it copies the batch and its shelf life expiiration date. Due to this, there are time when the user unknowingly enter a differrent SLED and hence change the batch unknowingly. We want to stop this. We want that while we are doing 311, the batch record and the SLED should get copied from the batch master BUT the field for SLED should be grayed out or the user should not be abale to enter ANYTHING in the SLED and the system should take the default SLED from batch master. Can we achieve it through config ? Please suggest.

Please get a user exit developed and add it to the program SAPMM07M which is used in MB1B which will solve your purpose. The User exit should be fired when using 311 movement type during copying of Batch Characteristics. Hope this helps you.

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

Missing 934w move type in delivey

Hi
We are facing issue where there is no 934 movement created by system for delivery # xyz
Mat DOc # ABCD ( 932) created in plant # 8635 and there should be 934W in plant # 8670.
X part was not fully move to service plant 8670 miss 934 move type
Could u pls le me know the cause of this issue and what and where we need to update ?
Regards
Vikas

Hi,
Movment type has to be assigned at Schedule line config. Check you settings in TA - VOV6
Edited by: Ajeet Parmar on Jul 16, 2009 11:40 AM

Error:movement type for follow-on document missing

Hello,
Can anyone help me that i got the error message while creating the shopping cart from INTERNAL GOODS/SERVIES after adding the product id in the second step.
Error :"movement type for follow-on document missing"

i define BSA in ppoma_bbp as
BSA: oneclnterp\nb
and i define this number range Supplier Relationship Management ® SRM Server ® Cross-Application Basic Settings ® Number Ranges ® SRM Server Number Ranges ® Define Number Ranges for Shopping Carts and Follow-on Documents
NO
From Number
To Number
Current Number
Ext
Description
(not in the table)
01
0010000000
0019999999
Shopping cart
LO
0020000000
0029999999
Faulty local PO
PO
4100000000
4199999999
Backend PO
RQ
0090000000
0099999999
Backend Purchase requisition
RS
9600000000
9999999999
Backend Reservation
SE
0200000000
0209999999
Backend Service PO

Movement Type Data is missing

Similar Messages

Maybe you are looking for