Movement type error for HU GR

Hi Experts,
I am trying to post GR in MFHU transaction for the HU I have created. I am getting the following error. Could you please help me resolve it. The error description I am getting is as below:
Update control of movement type is incorrect (entry 131 _ _ _ F)
Message no. M7226
Diagnosis
The system could not find entry 131 _ _ _ F in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
Regards,
Sachin

Hi,
Refer to below link should help.
Re: Error: Update control of movement type is incorrect (entry 131 _ _ _ F)
Your MM person should help you on this.
Regards,
Vivek

Similar Messages

  • Movement type error for Service Processes

    Hi All,
    We are working on service scenario with CRM5.0 and R/34.6c.
    The problem that we face is as follows,
    Whenever we make a service confirmation with products with item cat group BANC the movement type is correctly determined as 261 but whenever our service confirmation contains the products with item category NORM, the R/3 system returns the error that the movement type 291 is not found for the business area.
    Regards
    Rekha Dadwal

    The error was due to the material type. We changed the material type and now it works fine

  • Make movement type relevant for BW Purchasing Extractor

    How do I make a movement type relevant for a Purchasing extractor? Specifically 2lis_02_SGR.
    The SAP functional team (I am on the BW team) started using movement type 161 and 162 for goods receipts. They set up the movement type in OMJJ in ECC. But it does not flow into BW via the 2lis_02_SGR extractor.
    I went into the Transaction Key for BW and added 161 and 162 and now they show up in the table - V_TMCLVBW / TMCLVBW, but they are not flagged as statistically relevant. I have tried to go to tcodes MCB0 and MCB_ but get an SAP error "
    View/table V_TMCLBW can only be displayed and maintained with restrictions
    " and I do not know what this means or how to get past it so I can edit the table.
    I have tried resetting up the initialization tables for Purchasing, but the movement types still do not come in the extractor. I think this is because the table still does not have these movement types flagged as statistically relevant.
    Thanks
    Jeff

    I have gotten a developers key, so I was able to make V_TMCLVBW editable via MCB_ but this still brings me back to the change view for transaction key maintenance for transfer into BW. But I still can not figure out how to make the movement types relevant for BW.

  • Blocking Movement type 122 for T code MBRL

    All SAP Gurus,
    I want to block the movement type 122 for T code MBRL.
    For this I used T code OMJJ, but here it is not showing MBRL as used T code.
    If MBRL is not specified in OMJJ for 122, then how MBRL T- code is allowed for movement type 122.
    Please give ur valuable inputs.
    Regards,
    Edited by: Rajan R. on May 19, 2008 10:22 AM
    Edited by: Rajan R. on May 19, 2008 10:59 AM

    Check the all authorization roles you have created for inventory management. In there you can take out MBRL from the list. Then, create a new role for transaction MBRL only, and then you can allow other movement types for this role except 122. Assgin this role to your users.
    This is what I have done at two client locations.

  • Block Movement type 122 for T code MBRL

    All SAP Gurus,
    I want to block the movement type 122 for T code MBRL.
    For this I used T code OMJJ, but here it is not showing MBRL as used T code.
    If MBRL is not specified in OMJJ for 122, then how MBRL t code is allowed for movement type 122.
    Please give ur valuable inputs.
    Regards,
    Edited by: Rajan R. on May 17, 2008 3:22 PM

    Hi
    Thanks for the reply
    Now I want to block movement type 122 so that it can not be used throuh MRRL, is it posssible and how to do that?
    I have alredy blocked MIGO for movement type 122
    Edited by: Rajan R. on May 17, 2008 3:51 PM

  • Blocking Movement type 309 for perticular user ID

    Hello,
    We want to block Movement Type '309' for perticular user ID.
    How this can be achieved?

    Hi,
    You can do it through autherization  control ,
    For Object
    M_MSEG_BMB     Material Documents: Movement Type
    M_MSEG_BWA     Goods Movements: Movement Type
    M_MSEG_LGO     Goods Movements: Storage Location
    Revove the Movement type 309 , for the particular user.
    Regards
    Manish

  • PGI for STO movement type error Message no. L9005

    Hi Gurus,
    I have created an STO.Created delivery and confirmed TO.
    Now while doing PGI,single step only(647 movement type),
    system throws the following message,
    "" Error during search for WM movement type (641 1 L K  )
       Message no. L9005 "".
    As per my checking for both IM movement types 641 and 647, ' 641 ' has been assigned as
    Ref movement type and " 601"  has been assigned as WM movement type.
    601 is maintained in WM.Should I maintain 641 in WM?That case I have to change SAP std settings..
    If so pls provide me the details for 641 K.
    Kindly help.
    Best Regards

    Hi Kumar,
    Try the following:
    Maintain an entry for your warehouse with movement type 641 SpStIn and Movment Indicator l combination in transaction OMLR.
    And also ,
    Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location.
    Here check whether the warehouse number is assigned to your plant and storage location.
    Thanks!
    Preethi
    Edited by: preethi R on Dec 2, 2008 10:50 AM
    Edited by: preethi R on Dec 2, 2008 10:50 AM

  • Error in printout for mb1a movement type 221 for a particular plant

    Hi All,
    While printing through MB90 for the material document which processed through MB1A and movement type. The following error is appearing for only one particular plant , i am getting the following error.
    Text  ID F14 language EN not found
    Message no. TD600
    Diagnosis
    You want to read a text which does not exist in the data base (or update memory).
    System Response
    Reading could not be carried out.
    Procedure
    You need to create this text:
    1. Initialization (module INIT_TEXT)
    2. Save (module SAVE_TEXT)
    Please send me any solution if any gets same error.
    Thanks,
    Suresh.

    Hi Bijay,
    Thanks for your relpy. I tried to add the plant and storage location, I am getting the below error.
    Entry LT91   does not exist in TSP03 (check entry)
    Message no. 00058
    Diagnosis
    Input values must be defined in Table TSP03. The value or values 'LT91 ' are not specified in this table.
    Procedure
    Check whether the input is correct and correct if necessary.
    Procedure for System Administration
    If this is not an incorrect entry, check the system settings and change them if necessary.
    If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
    Thanks,
    Suresh.

  • 132 movement type errors in MF47 or COGI

    I understand we get 101, 102 and 131 errors in cogi.. but if there an error while reversing a backflush in REM (132) and if an error occurs, will that be seen in MF47 or COGI?

    Hello Swathi,,
    I am never face the issue of movement type 132 error in MF47/Cogi..
    Whenever we reverse the GR, system just create the planned order and Qty will reduce from the Stock.. It is SAP standard behavior..
    if your reverse qty more then stock qty in that case system pop up error.
    If you have separately back flush MF60 for GI and GR with respect to MFBF, In that case if you try to reverse the GR qty system not create planned order...
    Which error you expecting in MF47 and why ?
    Please check and revert
    Regards
    Umesh Mali 

  • COGI Movement type Error

    there are many item numbers that appearing in COGI for the "Movement Type" "261." and error text as "Sales order stock 330000172 000010 does not exist".
    what might be the problem?
    how can i fix this?
    could anyone help plz

    Hi,
    Try to move the components from unrestricted to SO stock using MB1B + 412E - maybe it helps.
    Regards,
    Csaba

  • 671 - movement type - Error update control

    Hi,
    I have created ew movement type Z71 with reference to 671 movement type for return sto delivery.
    We have removed the movement type category 01 from Z71 mvt type, due to this we are not able to do the PGR for return sto deliveries.
    While doing PRG system showing error: Update control of movement type is incorrect (entry Z71 X X _ L ).
    We have removed that mot.type category for the purpose of updating the RG23D register in Depot, it has been suggested by SAP only. But i don't know the link b/w update control and movement type category.
    Please let me know if these is any config for movement type control related.
    Thanks&Regards
    Lakshmikanth

    Hi All,
    This is a bug in SAP
    SAP has replied with Pilot note. They have given one pilot note to us.
    We are going to implimenting in J1IG program for updating the RG23D register with reference to negative post goods issue(material document which is having 671 movement type).
    The Pilot note number is 1300928. You can find more details in this note.
    We will get back tou you after testing this note.
    Regards
    Lakshmikanth

  • Issue in GI for shipment for movement type 161 for vendor returns

    Hi Guru's,
    When we try to make the Goods Issue for the shipment in VT12...I'm geting a error message as
    "Combination of Movement type/Special stock/  stock type is not possible".
    And also FYI..the delivery in the shipmet was completley picked and packed and loaded.
    Please Advice.

    Check following SAP Notes:
    - Note 1090988 - Pooling: Quality inspection for return delivery not possible
    Symptom - You run the ADEC special pooling process for a material in which master inspection setup is maintained.
    The error message M7 361 occurs: Combination of movement type/special stock/stock type is not possible. No inspection lot can be created by goods movement receipt (GR) for pooled stock.
    Reason and Prerequisites - It is not planned to deal with ADEC pooling order with quantity inspection lot. The relevant Customizing entries are missing for this process.
    Solution - Refer SAP Note 1090988
    - Note 376615 - M7001: MEU5 xx 01 is missing in table T156M
    Symptom - During goods receipt to a stock transport order with returns item, the system generates message M7001:
    'Please check table T156M: entry MEU5 xx 01 does not exist'. or message M7361: 'Combination of movement type/special stock/stock type not possible'. The system displays the error message if you want to post the returns item from the stock in quality inspection, from the restricted-use stock or from the blocked stock to the stock in transit.
    Cause  - The entry is missing in the standard system
    Solution - Refer SAP Note 376615
    Also, check Allowed Transaction & Reversal & Follow-on M Type node in Tcode OMJJ for M Type 161
    Thanks & Regards
    JP

  • Which movement type use for return stock form one plant to other plant  in

    HI friends i am working on STO PROCESS
    i need to transfer return stock from one plant to other plant as a return stock i am using Mvt type 455
    but system shows  following error
    Update control of movement type is incorrect (entry 455 X X _ L)
    Message no. M7226
    Diagnosis
    The system could not find entry 455 X X _ L in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
    thanks in advance

    Hello,
         I think there is a standard STO movement type you can use. But I can't remember. Why don't you try to find it and test if it fit your requirement?
         There are some information for your reference. Please check on website:
    http://www.sap-img.com/materials/difference-for-stock-transfer-and-transfer-posting.htm
    Using STO without delivery: 
      doc.type: UB
      GI:351, GR:101
      STO with delivery:
      GI:641, GR:101
      delivery type:NL
      STO with delivery and billing:
      GI:643, GR:101
      delivery type:NLCC , billing type:IV
         And if you want to use the way to return the goods replenishment, try to flag the return checkbox while you create purchase order item. Of course, corresponding configuration is required.

  • Find Material Document with Movement type 103 for material document 105

    Hi experts,
    In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
    Regards,
    Abdullah

    Hi,
      you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
    But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
    Regards,
    Chaitanya

  • Movement type error

    Hi All
    I"ve created return delivery from customer sales return, after creating goods movement type should be for return i.e. stock should increase, instead its taking 601 m. type for Goods Issue!
    Where to change so that delivery takes proper m. type for return delivary?
    please reply as soon as possible.

    Hi
    In addition to what Mr.Lakshimipathi has suggested in VOV6
    if you choose movement type 655 it will go to quality inspection
    if you choose movement type 653 it will go to unrestricted stocks
    if you choose movement type 651 it will go to blocked stocks
    The standard says it should be either 655 or 651
    Regards
    Raja

Maybe you are looking for