Movement type--logon language

hello ,
Where and how do we assign logon language to the movement type so that it reflects in table t156ht.
Thanks
Joseph
Edited by: joseph_sweden on Nov 12, 2009 9:52 AM

Hello ,
GO TO  OMJJ  Transaction give movement type, select Short test and enter Langauge  and select Help text , here also enter language.      or
V_157H_VC  Hlpe text
V_156T_VC  Short Text 
Enetr values(langauge) in above said tables.
Regards
Mahesh Naik

Similar Messages

  • Firefox crashes when I try to watch a movie type youtube, has just installed nero and Nikon software on my computer

    Firefox crashes when I try to watch a movie type youtube, has just installed nero and Nikon software on my computer. This began shortly after I installed my new CD burner with Nero 9 burning software, about the same time I also installlerade my new Nikon camera software ViewNX2, I ran Avira scan and Microsoft Egan virus scan and they say everything is good in it, he reported a few times, I ran Avira scan of your computer and Microsoft's own Virus Scanning and they say everything is good in it, he reported a few times, tried again now and the sound is heard all the way but the image is still, therefore gentle freezes, got no number on the bug report so I can not say that. Also ask your pardon for errors in language that may be present but hope you understand anyway!

    Double post, answered in other thread written by same user.

  • Displaying smartform output in logon language.

    Hi All,
    I have a requirement in which I create a smart form in English language. If i logon in a different language, The smartform o/p or layout should be displayed in that logon language.
    I have checked se63 but not able to figure out based on logon language
    Thanks in advance,
    Gopinath

    Firstly, you need to design the smartform in english and make sure the form is avialable in all languages.... and do the necessary translations using SE63 transaction code. ...
    transalation steps:
    1) SE63 <- tcode
    2) translation> abap objects> other long texts
    3) Pop-up, double click on forms and styles, and double click on SAP smartforms and do the translations to respective target language from source language.
    coming to your second question.
    Do necessary changes to the control parameter of the smartform to
    cs_control_param-langu = SY-LANGU.
    make sure, this changes are done in print program.
    If parameter cs_control_param-langu       = nast-spras then it takes the language form the message type, which does not suits your requirement.
    I hope above information will help you to close the thread.
    Regards,
    SaiRam

  • Movement types without description in Spanish

    Hi !
    We are facing a problem on that some movement types like 651 does not have description in Spanish language. For example, in the MB51 we cannot see any description for some movement types.
    In the development environment its ok , in the quality and productive its wrong.
    Do you have any clue on that?
    Thanks,
    Rodrigo

    Hi,
    Please see the below link if this can help you.
    http://help.sap.com/saphelp_45b/helpdata/en/c6/f83cee4afa11d182b90000e829fbfe/content.htm
    Anil

  • Movement types used in these activities and also STO

    HI SAP GURUS,
    Movement types used in these activities and also STO ( PLANT TO DEPO), (DEPO TO PLANT ) WIT AND WITHIN 1 COMPANY CODES
    AT PGI
    AT BILLING
    AT RETURNS
    all possible ways OR any short cuts
    points are to be rewarded for best relevent answer

    hi
    for PGI 601
    for Returns 651
    for Billing - None, because it is either copied from delivery or order.
    What is a depo in your language? Is it a storage location,if yes, shop floor to storage location it is 911
    for STO
    If it is within company code STO, in the STO it is 101, during delivery 641.
    it is intra company codes, then it is 101 in STO and delivery it is 645 or 647 (not sure)
    goodluck.

  • 412 E movement type - COGS posting vs. Inventory posting

    Hi All -
    412/E movement type from unrestricted stock to sales order stock is sometimes triggering an accounting entry like:
    Dr. 133000 customer sales stock
    Cr. 133000 unrestricted stock
    but sometimes it appears that transaction key in OBYC - GBB - is being triggered as the offsetting account.
    What setting in SAP is causing this to happen? 
    Thank you!

    Hi,
    I'm not in SAP sever logon right now. for as i remember is that a reversal transfer from sales order to own?? while you set above that. sure is customer sales stock will be increase due to reversal and unrestricted stock will decrease because of this reversal transfer.
    I don't see any problem here, because reversal MM ledger and FI is created automatically as an audit trail.
    hope helps

  • Error in printout for mb1a movement type 221 for a particular plant

    Hi All,
    While printing through MB90 for the material document which processed through MB1A and movement type. The following error is appearing for only one particular plant , i am getting the following error.
    Text  ID F14 language EN not found
    Message no. TD600
    Diagnosis
    You want to read a text which does not exist in the data base (or update memory).
    System Response
    Reading could not be carried out.
    Procedure
    You need to create this text:
    1. Initialization (module INIT_TEXT)
    2. Save (module SAVE_TEXT)
    Please send me any solution if any gets same error.
    Thanks,
    Suresh.

    Hi Bijay,
    Thanks for your relpy. I tried to add the plant and storage location, I am getting the below error.
    Entry LT91   does not exist in TSP03 (check entry)
    Message no. 00058
    Diagnosis
    Input values must be defined in Table TSP03. The value or values 'LT91 ' are not specified in this table.
    Procedure
    Check whether the input is correct and correct if necessary.
    Procedure for System Administration
    If this is not an incorrect entry, check the system settings and change them if necessary.
    If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
    Thanks,
    Suresh.

  • Fixing automatic printing of material document for goods movement type 101

    Hi experts,
    I have a situation, where I want to fix automatically printing of material documents good receipt and transfer posting related to movement type :
    101- GR for plant XYZW to the printer AB12 with output type WE03 " GR note version 3" Language EN.
    311 - transfer posting plant XYZW to the printer AB12 with output type ZUGT language EN.
    Please provide pointers!!

    Hi Biju,
    Thanks a lot for the information. But I a facing a problem, I have maintained the Plant/Storage/Condition type in OMJ3 with printer also maintained in it.
    But, I am not able to generate output when I am doing MIGO for the Purchase order.
    I have to go MB02, maintain output type 'WE03' and printer-PL56 in the message tab of material document and then only i can see the spool is generated in SP01.
    My output condition type is maintained in MN21, with following parameters; Trans/Event type: WE,  Print Version: 3, Print Item: 6 for output type WE03.
    Moreover, Do I need to maintain the new printer in the printer settings.
    Please help me in getting the material document print output at MIGO only.

  • Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    Warehouse managment has its own movement types, most identical to inventory management movement types.
    These WM movement types are determined via reference movement types.
    the error you have just looks like your customizing is not complete.
    IMG > LE > WM > Interfaces > IM > define movement types.

  • Error in MIGO of Subcon PO in MTO scn, not triggering Movement type 543/E

    Dear Consultants,
                                  I am trying to perform Goods receipt against a Subconctracting PO, in a MTO scenario. The components are linked to Sales Order (Special Stock - E). I have maintained '0' in the Individual / Coll requirements field in the MRP 4 view of the component.
    So after creation of PO(Subcon), I am trying to perform MIGO - without issuing components to vendor as 541/E movement type for componenets is not allowed in standard.
    While performing MIGO I am getting the error no stock available with vendor, the system is trying to trigger 543/O movement type whereas I am expecting 543/E to be triggered for the components.
    I am also not able to perform 311/411 E movement type for the components as they are linked to WIP Batch.
    Can anyone sujjest if there is a way by which the MIGO should trigger 543/E during MIGO.
    Thanks
    Arindam.

    Hi
    i donr think the movement type 543 E will trigger as the subcontracting only supports 543 O in standard , you need to do customizing as follows
    Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0002", Movement Type "543 E" should be maintained.
    just check following link for the subcontracting with sales order ,
    [Sub Con 1|http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm]
    [subcon 2|Subcontracting for project stock;

  • How to change movement type of Delivery goods issue?

    Hi all!
    I need to change the movement type used by posting Goods Issue in an outbound delivery (tcode VL02N).
    Please provide some instructions or cookbooks on how to do the configuration..
    Thanks a lot!

    Hi,
    Get the Schedule Line Category used in Sales order. Go to VA03, here double click on the sales order line item and go to "Schedule Lines" tab, here get the Schedule Line category.
    And then go to VOV6 and double click the Schedule Line category and in detailed screen, change the movement type.
    Then try for Delivery and PGI.

  • BADI for movement type 601 and COGS GL account

    Hello SAP expert,
    I am searching a solution from SAP enhancements.
    The requirement is to provide different COGS GL account based on the Customer Account Assignment Group value(KNVV-KTGRD) when SAP performs goods issue. for example, movement type 601,
    This means, when company ships goods to differnt customers, then SAP should generate different COGS GL account.
    for example, when company ships goods to customer account assignment group '01' (Domestic customers), then SAP should generate COGS GL account 818100.
    when company ships goods to customer account assignment group '02' (export customes), then SAP should generate COGS GL account 818200.
    when company ships goods to customer account assignment group '03' (Testing - sample customers), then SAP should generate COGS GL account 818300.
    the logic is following:
    KNVV-KTGRD COGS GL account at goods issue
    01 Domestic 818100
    02 Export 818200
    03 Testing - sample 818300
    04 Testing - VOM 818400
    05 Franchise 818500
    Is there any similar BADI available to solve the above?
    Happy New Year!
    Regards,
    Sylvia Chen

    Hello,
    First of all, Happy New Year!
    Thank you for the tip.
    Enhancement LMR1M002 was already implemented in the current SAP environment.
    The text is "Account grouping for GR/IR account maintenance".
    Function "EXIT_SAPLKONT_011" is the component under Enhancement LMR1M002.
    That is all I can see from SAP.
    I am not an ABAP person.
    Can you provide information for the next step?
    Thank you.
    Regards,
    Sylvia Chen

  • Amount on Goods receipt for return orders is wrong with movement type 653

    Hi All, I am sorry if it is a simple question because i am an abap'er.
    My requirement is to create return sales order (with ref.to Billing document) and deliver and PGI for the return orders. This should go to sales order stock. Accounting document should be generated for material document and the amount should be picked up from condition type (if man.cond. type exist) else from material master.
    1) Created a sales order (Bought in item cat) - Create PO (Non stock) - Receive goods (MIGO) - Create Delivery (VL01N) -   PGI (Movement type 601 and special stock indic. 'E') - Create billing document (F2 type from VF01)
    So far it is good. The account document is created (PGI - cost of goods) with correct amount as desired
    The next scenario is if the material is returned? This is where we are having issues
    Created sales order with ref.to billing doc. (S.O: RE. Item.Cat. Return Bought in (YRBI)... this is pretty much same as bought in except few things which are YRBI  - Delivered - PGI (Goods returns. unrestricted) Movement type 653 - Problem comes here.
    a) If i put special stock indic 'E' in 'Return bought in item.cat - There is no accounting document generated for 653 movement type.
    b) if i maintain space instead of 'E' in return bought in item.cat - there is an accounting document but the manual cost is not copied to accounting document and it is picking up from material master which we dont want and The stock is not showing up in sales order.
    I did my research (forum, OSS, google, and in help.sap.com) before posting here but no help.
    I have checked account assignment categories for 'A' - (some post explained this) I tried changing values but no help.
    I even tried changing the schedule line category to DN but no help.
    I dont know what i forgot to change or check but i have tried everything what i know and from help from different sources ... still couldnt get it.
    Original requirement is to make the return stock as sales order stock and this can also be returned to vendor. If there is a manual cost in return sales order, the PGI accounting document should be created with this condition value else from material master.
    My pricing settings are good.
    It would be really helpful if any one guide me to configure the process or atleast if anyone tells me what am i missing... .

    Have a look at any of the following notes:-
    1)  Note 171989 - Sales-order-related productn: Custmr exit COPCP002
    2)  Note 520000 - FAQ: Valuated special stocks
    3)  Note 557582 - User exit and valuated sales order stock
    4)  Note 580228 - Incorrect prices for materials procured externally
    5)  Note 983193 - Docu:Externally procurd material in valtd sales order stock
    thanks
    G. Lakshmipathi

  • Goods Receipt Report With 101 movement type using bapi_goodsmvt_create

    Dear Abapers,
            i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
    bapi_goodsmvt_create and data should upload through excel sheet.
    still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
    What are all the inputs i need to take and please give some valuable inputs to me.
    please do help ..... thanks for advance..
    Thanks & regards,
    Vinay.
    Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
    Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

    Dear Abapers,
            i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
    bapi_goodsmvt_create and data should upload through excel sheet.
    still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
    What are all the inputs i need to take and please give some valuable inputs to me.
    please do help ..... thanks for advance..
    Thanks & regards,
    Vinay.
    Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
    Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

  • Field Selection error for movement type and G/L account

    I am currently experiencing a field selection error between movement type 601 and G/L account 7140000.  The problem field is 'Segment'.  This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
    However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
    Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
    Many Thanks

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

Maybe you are looking for