Movement type restriction....Urgent issue
Hi.. Every body,,,
Actully 'm, a basis consultant , i have problem with mb1b Transaction code..
Myproblem is
i have 4 plants 1,2,3,4 now i want to restrict the goods transfer between these plants like
01---02 -
accepted
0201--
accepted
0103--
not accepted
0104--
not accepted
0203--
not accepted
0204--
not accepted
And 1,2,3,4 plants must transfer goods to vendor
i'm trying by using movement types 301 for plant to plant transfer and 541 for plant to vendor
i have created two roles in one i was restricted company code 1 and 2 with movement types 301 and 541
and in another role i was resricted comany code 3 and 4 with movement type 541 only..
If i give thes two roles to diffrent users it is working fine, but if i give to same user but it is not working..
I don't have functional kw......This is an urgent issue.......please suggest how to restrict..
Just check a solution for the same by posting this question in MM module.
Regards,
Rajesh Banka
Similar Messages
-
Different movement types for goods issue via outbound delivery
Hi gurus,
How can I use different movement types for goods issue via outbound delivery?
Thanks&Best Regards,
BurcuTo use different schedule lines, we need different item types and different document types. Is that right?
Is there a user exit in outbound delivery to post goods issue?
Thanks... -
Different movement types for Goods Issue for different Order Types
Hello Experts,
Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
Thanks and regards,
SatyajitSatyajit,
Folow the link given,
Re: How to add new movement types when creating reservation?
Hope this helps you.
SmanS -
Movement Type for Goods Issue to Project
Hi All
Could you please tell me which movement type use for issue to Investment Project and issue for Customer Project ?
Regards,
ThangDear Cao,
Refer this link which will give some important information about Movement Types.
http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
Regards,
Sandeep -
Movement type for goods issue in intercompany STO business scenario
Hi, everyone,
In intercompany STO scenario, firstly we should create a purchase order with a transfer order type just like as UB,
then we use T-code: VL10B to create the delivery note by referencing the purchase order created in first step, in succession, billing, goods reciept.
Actually I have a question about the movement type in goods issue process. The standard is 643 deliveried by SAP.
Can I customize the movement type in intercompany STO business scenariohi,
The following are the scenarios of cross plant goods movements:
Alternate plant procurement of purchased items
Alternate plant production
Plant-to-plant goods transfer of grouped project stock
Stock transfer without reference to a stock transfer order (STO)
1 Step 301
1 Step reversal 302
Stock transfer with reference to an STO in the receiving plant without SD
2 Steps - 351 and 101
2 Steps reversal 102 and 352
Stock transfer with reference to an STO in the receiving plant with SD delivery
2 Steps 641 and 101
2 Steps reversal 102 and 642
1 Step 647
1 Step reversal 648
Movement Type & Description
301 / 302
Goods receipt into production order in another plant. This is a one-step, cross-plant stock transfer. This movement type does not use STOs but behaves like a goods receipt of stock, except that the stock comes from another plant into the current plant. Movement 302 is the reverse of 301.
351 / 352
Stock transfer that is in transit between two plants. This is a twostep, cross-plant stock transfer, because after movement 351, you do not immediately see the stock in the receiving plant. After movement 351, the stock is in transit between the two plants. Only after you have performed a goods receipt (movement 101/102)of this in-transit stock into the receiving plant can you see this stock in the receiving plant. Movement 352 is the reverse of 351.
641 / 642
Stock transfer that is in transit between two plants, with delivery documents (Sales and Distribution). This is a two-step, cross-plant transfer of stock, because after movement 641, you do not immediately see the stock in the receiving plant. After movement 641, the stock is in transit between the two plants. Only after you have performed a goods receipt (movement 101/102 ) of this in-transit stock into the receiving plant can you see this stock in the receiving plant. Movement 642 is the reverse of 641.
647 / 648
Stock transfer to another plant, with delivery documents (Sales and Distribution), with STO. This is a one-step, cross-plant stock transfer because after movement 647, you cannot immediately see the stock in the receiving plant. The stock is never in transit with this movement type, but the stock is transferred with reference to an STO with Sales and Distribution documents. Movement 648 is the reverse of 647.
regards,
Siddharth -
presently we had allowed negative stock with idea of allowing negative sales. we aalso using VL01NO transaction for stock transfers from stores-stores or stores-dc..etc.
due to the reason of allowing negative stocks system is allowing outbound delivery for deficit stocks also.
for example:
in particular store we have article A qty is 10. still this store is able to process post goods issue for more than 10 qty without getting any error/warning message. also, at receiving store during GR(MIGO) system is just giving warning message of deficit of stock.
i want to control that if the system does not have enough stock for transfer it should not allow user to process stock transfer.
is there any so that where i can allow negative stock and restrict for particular mvt types like 603(VL01NO).
plz suggest.Hi ,
Try tcode OMBS and make entry for the movement type mandatory.
Every time user has to enter the reason for the movement which will provide some control and user cannot move ahead without entering the reason.
Regards
Ankur -
Movement type for miscellaneous issues/receipts to customer consignment
We need a way to do a miscellaneous issue/receipt to customer consignment location. How can that be accomplished? What movement type should we use?
Hi,
You can use movement types in MB1C or MIGO
561 W - To receive material in Customer consignment
562 W - To issue material from Customer consignment
Also you can change the offsetting entry in GBB-BSA and Stock A/c in BSX (In T. Code - OBYC)
If you don't want to hamper 561 W and 562 W settings then take a copy of these movement types in OMJJ and use. Also you can assign a different valuation modifier than BSA to these new movement types and accordingly do account assignment in OBYC. -
New Movement type for Goods Issue to Customer
Dear All
I have a scenario. I need to Issue Material to customer internally.
I have created a new movement type by copying Movement type 201.
I have made all the settings as required. But when i go to Transaction code MIGO, and use my new movement i am not able to get the customer data fielld.
I have made the following settings for the new movement type.
1. I hAve activated customer field for the new movement type. in "Field Selection Enjoy Transaction"Please check whether you have added MIGO in ALLOWED TRANSACTION session
Regards
V V -
Movement Type for Good Issue and Good Consumption in Table S032
Hi Gurus,
Would like to ask what are the movement type used in Good Consumption and good issue in Table S032.
Thank you in advance
Best Regards,
Julius CalugayHi
If a goods movement is an goods issue and if its going to reduce the inventory stock/value (goods issue posting causes an update of the consumption statistics of the material) , then its going to be an goods consumption also - ex. issue to a cost center/order
If a goods movement does not affect the inventory value but change in stock, then its only a goods issue - ex. transfer posting
If a goods movement is not an goods issue, but it reduces the inventory stock/value, then its only a goods consumption - ex. receipt of materials in a subcontract PO, here the raw materials is assumed as consumed for the finished product receipt.
Thanks !
E.Avudaiappan -
Movement type used for ISSUE.
Hello all,
I need to create report,where i need to list out all the movment type used for ISSUE(Consumption).
How to list out all movement type used only for ISSUE(consumption).Is there any logic can be used here?
Useful answer will be appreciated...
Regards,
Shyamhi,
go to MB51 and enter the movent types shown below for issues or consumption, then you will get list of all documents related to consuptions.
201-consumption for cost centrer
221-consumption for project
231-consumption for sales order
241-consumption for assest
251-consumption for sales
261-consumption for order
281-consumption for network
291-consumption for all account assignments.
you have to remember the movement types, i think there is no special logic to get these movement types separetly. -
Movement type of Goods Issue to SubContractor
Hi Gurus,
I want to issue goods(ROH materials) to subcontractor. Which movement type should I use via T.Code MB1A.? System is ECC 6.0
Thanks,
KumarHi,
1. Use T code MB1B and Mvt type 541 to transfer material to your sc vendor with ref to PO raised on SC vendor
2. Material document will get generated once you save the tranaction. No accounting document will be generated.
3. Go to to code MMBE to see the stock of material provided to your sc vendor
Regards
Ram -
Movement type 201& goods issue
hi every one
can i can make reservation a mandatory field for goods issue if it is not possible
can i make reservation as mandatory field for any movement type
i tried it by changing movement type fields but it doesnt show effect if so how can
i do that .
or is there any parameter id that can full fill my requirement
With Regards
S.K.chaitanyahi,
I didn't try to make it mandatory from system perspective,before, but I do remember, way back in 98, in one project, we developed a solution where the requester has to go to store with reservation (already created even for 201) then only store keeper issues material. For your requirement, just now, quickly looked at a possible solution.
When you go to MIGO, when you select the option A07 - Goods Issue, the next field has associated options:R01, R02, R08, R09 and R10. R09 is for reservation. In the configuration,Materials Management>Inventory Management and Physical Inventory>Settings for Enjoy Transactions>Settings for Goods Movements (MIGO)>Settings for Transactions and Reference Documents
For transaction Event A07 - Goods Issue, Assigned reference documents in standard SAP are :
R01, R08, R09 and R10. Delete the remaining except R09. This setup is for transaction code MIGO. Similarly for other
MIGO_GO
MIGO_GR
MIGO_GS
MIGO_TR
MIGO_GI
ones should be taken care, else, user can go from other tcodes to process GI...users are very smart, these days!!
Regards -
MM Change Value String from new Movement Type. (URGENT)
Dear friends ,
We have copied moviment type 501 and we need to change the value string to this movement.
So after copy to 933 and creates value string ZA01 copied from WA01 , which tables should I change to value string of movment type use it ?
We are using ECC 5.0.
Best regards,
AlessandroCould you please tell us what you want to achive with this setting though iam 99% sure that what you told in this thread cannot be done. WE always try to create the new movement types using exisiting movement types. So , transaction key/ Value string are copied over . So, i highly doubt if you can even change those fields as they are defined by SAP and used as part of their code and highly recommends not to attempt to play with them.
If you want, you can check in OMWN and OMJJ to see that they are uneditable..
please let us know what you want to achive with this so that we can try to help you.
Please revert back to us if you have achived in creating a copy of WA01 and also let us know how you did it . Iam just curios.
AH -
Movement type authorisation for different storage locations
Hi sdners
can we make the movement type restricted to any storage location
Ex: i have 2 storage locations 1110 and 1114 in plant 1100
and i have two end user mst1 mst2
if so i want to make sure that mst1 is responsible only for issue goods from 111o
and he should not able to issue goods from 1114 vice versa to mst2
is there any possible configuration please let me know.
With regards
S.K.chaitanyaHi
u can achive this through authorization
First
You need to activate the storage location authorization check for goods movements in config
SPRO->Materials Management->Inventory Management and Physical Inventory->Authorization Management->Authoization check for storage locations.
Then required control is achieved via authorization object M_MSEG_LGO.
Get in touch with Basis and ask him to remove required storage location from user ID so that that user will not able to pass any movement to that storage location
Vishal... -
Can I assign diffierent GL to movement type 601(GI) and 459(return to bl ?
dear friends,
we have GL50000 (cost of goods sales) assigned to both movement type 601(goods issue) and 459( transfer posting from return to bloked stock).
My question is :
1. Can I assign different GL to these two types of goods movement?
2. in which configuration can I find movement key , such as 601 behind a transaction, such as goods issue?
Your advice will be deeply appreciated.
Thanks,
LindaHi
Yes, you can assign
The Key for 601 PGI is VAX & VAY
The Key for 459 is is also VAX as per OMJJ... However, you can type ZAX in the place of VAX and assign a diff GL Account in OBYC: GBB-ZAX
Go to OMJJ > Tick Movement type > Enter > Specify the Mvt Type 459 > Enter > CLick on "Account Grouping Tab" on Top Left side
br, Ajay M
Maybe you are looking for
-
Questions about accessing data from old drives
I am trying to access data from a 10-12 yr old IDE drive that I used with a PC way back when. I place it in an enclosure, and when connected, receive a message via Lion (see attached). Anyone have any idea if the drive may work when connected to a mo
-
I've had several pinned apps, tab groups etc that always reappeared when I closed and opened Firefox. I always had history stored without a problem. Today I opened Firefox, and my pinned apps, tab groups, and history were all gone, and the option to
-
Videos freeze and crash PC in itunes and QuickTime
I have Wndows Vista 32 home premium - latest versions of iTunes and QuickTime will not play back music videos I downloaded via iTunes. Videos hang and PC freezes up. These are m4v format videos.
-
N73 3.0713.1.0.2 05-04-2007 RM-133
N73 3.0713.1.0.2 05-04-2007 RM-133 available on NSU.
-
As I try to load adobe photoshop elements 12 I get error "object already exists"
As I try to load adobe photoshop elements 12 I get error "object already exists" does anyone knows why?