Movement type to scrap the Restricted stock from warehouse
Hi,
Kindly advise the movement type to scrap the Restricted stock from warehouse.
Thank you.
hi
what do u mean by restricted stock
i thnk it is BLOCKED stock
please clerify that
u cant see any restricted stock in MMBe
it is GR blocked stock and blocked stock or reserved stock
hope it clears
regards
kunal
Similar Messages
-
Movement type to Scrap Return Stock
Dear Experts ,
Please let me know the movement type which is required to Clear the return Stock from the System(ie mmbe).Also if possible please mention the T Code .
Regards,
ChinmayHi,
First check ....when the stock is returned, what is the nature of stock ( unrestricted use/ Blocked stock/ Quality inspection).
Process this transction in MB1A and select appropriate movement type to scrap the material.
Regards,
Praveen. -
Movement type to consume customer consignment stock in the delivery plant ?
Need MM Functional expertise help to resolve the issue
They are two plants associated
1. Deliverying Plant (Customer Consignment Stock) ---> FPP
2. Recieving Plant (Vendor Consignment Stock) ---> FNT
Recieving Plant (FNT) will send a consignment Purchase Order (P0) to the delivery plant (FPP), which
inturn delivery plant FPP will do post goods Issue (PGI) with movement type 635 {635 --> moves
the stock from sloc 1000 to customer consignment stock}
Once movement type 635 is completed, it will go customer consignment stock in the delivery plant FPP
So Far OK..
Recieving plant (FNT) will recieve the stock against movement type 101K into Consignment location, followed
by movement type 411k (to move the stock from consignment location to OWN location). Once its under OWN location,
the inventory can be utilized for service orders (261)
Issue:
Not able to find a movement type to consume customer consignment stock in the delivery plant FPP
Note: 1. 411k is used to consume vendor consignment stock
2. Both plants are in different company codes
Following OSS notes has been checked, but none is addressing the issue
1. 520024
2. 610896
3. 362032
4. 13006Customer consignment stock is consumed physically by a customer, the customer reports to you how much he has consumed, the delivering plant creates then a consignment order for consignment issue in the delivering plant, followed by converting it to a delivery and posting goods issue.
-
What is the movement type to post customer return stock to qaulity inspec
Hi All
What is the movement type to post customer return stock to qaulity inspection stock
i am doing retuns process when ever i do post goods reciept in the return delivery return stock should automatically go to the quality inspection stock.
pls give advises
thnxHi
In your return order schedule line category DN (DN is the schedule line category of the return order in standard ) you need assign movement type 655
If you assign movement type 655 when you do PGR for the return delivery, stocks will sit in Quality inspection directly
653 will move stocks directly to unrestricted (Strictly not advisable)
651 will move stocks to blocked customer returns (recommended by SAP)
Regards
Raja -
Movement type for GI of material reserved from Network not allowed
Hi Experts,
Hope all are doing well.
I am facing a problem in PS, I have the following scenario.
I have some material in a storage location say 1010 - project storage location.
I want to use that material for some project. I have created a reservation from the Network for an activity 0010 with Procurement indicator - Reservation Plan Stock and Item category L.
After this saved the network, system generated reservation number.
I want to issue the material against this reservation from the Project Storage Location. (its not marked as Project Stock)
When I am trying from MIGO system says the material is not maintained for Q i.e., Project Stock.
I checked the movement type it is 281 Q, GI Network from Project, where as I want the Movement type 221 GI for Project from own.
The Movement type field in the Where tab of MIGO screen is in grat mode. So I cannot change that field.
Please tell me how can I issue the material from a storage location to the project for the reservation created from the network.
I am able to issue the material in case I am creating a manual reservation through MB21 with movement type 221.
Please guide me on this.
Thanks and RegardsFirst yu will have to bring that much qty to project stock for that WBS element by MVT type 415 vide transfer posting. Then you can issue that qty. against the desired reservation.
I hope this solved your problem
Regards.
Sanjay Bapat -
Movement type 671 (copy) to blocked stock instead of unrestricted use
Hello,
I want to post the stock from a return delivery (created with reference to return line of a stock transport order) to blocked stock instead of unrestricted use stock.
Standard SAP uses delivery item category NLRN (Return StockTransItm) and movement type 671 (TR to stock in transit).
I want to do the same thing that movement type 671 does but post the GR to blocked stock.
Any ideas,
Best regards,
DominikDear ,
Normally the process for intercompany 'return' stock transfer is as
follows:
1) Create an intercompany stock transfer order with flag 'Return'
(transaction ME21) or an item with the return flag (field RETPO)
2) Create a delivery with VL10B (or VL04)
Cross-company, delivery type NCR, item category NCRN
Intra company, delivery type NLR, item category NLRN
The delivery type will be assigned via Customizing IMG -> Materials
Management -> Purchasing -> Purchase Order -> Returns Order -> Store
Return
3) Create with the transaction MIGO a goods receipt from the receiving
plant (the plant that created the NB purchase order for return -
therfore the quantity is negative) with movement type 101
(this step is only necessary with the two-step procedure).
The goods receipt will NOT be created with reference to the delivery,
that means, that the returns delivery will not be updated. In
the system posts a goods issue with reference to the
returns purchase order that is the system converts
the movement type due to the returns indicator.
Cross company 161
Intra company 161
If the one-step procedure is used, step 3 needs not to be performed,
automatically posts the negative goods receipt when performing step 4
The quantity is then transferred to the transit stock.
4) Posting of goods issue via the delivery; Button 'Goods issue' -
starting with 4.6 the button is changed to 'Goods receipt'.
In background a goods receipt is performed
Cross company
Two step procedure 673
One step procedure 675 (step 3 with mov.type 161 is automatically
posted)
Intracompany
Two step procedure 671
One step procedure 677 (step 3 with mov.type 161 is automatically
automatically posted)
5) Create a credit for it
6) and check this credit.
In the standard it is not foreseen that the returns of cross-company
stock transport orders arrive a blocked returns stock. As you found,
in Note 430074, the relevant movement types for this process are 671,673
675 and 677. As indicated in the documentation you have, these movement
types transfer returns into unrestricted-use stock. Therefore, if you
wish to place these particular returns in blocked stock, you will need
to perform another movement from unrestricted-use stock once the return
has been received as such.
I am sorry I can not provide a more satisfactory solution. -
How we can scrap the intransit stock
Hi Experts
How we can scrap the intransit stock which is at header level of the plant.
Thanks
NiranjanHi Niranjan
If you are working on STO, there are two ways to do so
1.Reverse the removal from storage at the issuing plant and then post the scrapping of the material at the issuing plant. In this case, the scrapping is posted on a value basis in the issuing plant.
2..Alternatively, place the full quantity of the goods into storage at the receiving plant and then post the scrapping at the receiving plant. The scrapping is then posted on a value basis at the receiving plant.
It is important that the quantity destroyed does not remain in stock in transfer or stock in transit, but is reported in the system as scrapped.
Only possiblle is to cancel the material document no for scrap quantity, TO debit at the issuing plant and credit note at the receving plant to be scrapped.
Thanks
Satish -
I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??
1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck -
My wife is using our daughter's itouch. My wife likes the old scrabble on the itouch and asked me to find out if she is allowed to somehow move or totally transfer the old scrabble from daughter's itouch to wife's iphone. It was a free app,
My wife is using our daughter's itouch. My wife likes the old scrabble on the itouch and asked me to find out if she is allowed to somehow move or totally transfer the old scrabble from daughter's itouch to wife's iphone. It was a free app,
-
How do i remove the restriction code from my iphone 4s? i forgot it
How do i remove the restriction code from my IPHONE 4S? I have forgotten what it is. PLEASE HELP!!!
If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
That is what it says here http://support.apple.com/kb/ht4213
Message was edited by: Ocean20 -
Hi, i was wondering how to share movies for example, to the mac desktop from the macbook pro?
Share them how? View them? Copy them?
What kind of movies? DVDs? iTunes? Other MPEG, AVI files, etc... -
Transfer of Stock from Warehouse to Warehouse
Hi ,
I have the following query.
Warehouse 1 is assigned to Plant 100 and Storage location 10.
But now the client wants to assign Warehouse 2 to Plant 100 and Storage location 10.
As per the requirement I changed the assignment. But now I have come to know that there is stock for certain materials in Warehouse 1. Since the assignment is already done, how can I move the stock from Warehouse 1 to Warehouse 2
Appreciate the help.
Regards
Mohan"But lets say I assign Warehouse 1 back to Plant 100 and storage location 20"
I presume by storage location 20 you mean 10
Yes I believe this will work.
1) Assign back W/H1 to 100 / 10
2) Check if there is any stock inconsistency. Whatever stock available in W/H-1 for pl / st locn 100 / 10 should match stock at IM level.
3) Create new st locn 20 (in your last message it is 30) under pl 100 and assign W/H-1 to 100 / 20
4) Transfer all stk in W/H-1 from 100 / 10 to 100 / 20. At the end of activity there should be no stk at st locn 10 and no stk in W/H-1 for pl / st locn 100 / 10. All stock in W/H-1 will be for 100 / 20.
5) Now remove assignment of W/H-1 from 100 / 10 and assign W/H-2 to it.
6) Transfer all stk from 100 / 20 to 100 / 10 back.
At the end of activity stock will be in W/H-2 with pl / st locn 100 / 10.
Reg,
Sudhir -
Movement type for Unrestricted to Blocked stock
Can anyone tell the movement type for moving material from unrestricted storage location to Blocked stock for scrapping purpose.??
Also tell if any other way is also there...??
regards
Inder PalDear sasikanth
If I am correct,
321 is for transferring quality to unrestricted and
322 is reversal of 321
which means, unrestricted to quality.
Correct me if I am wrong.
Thanks
G. Lakshmipathi -
Single Report for production scrap and Movement type 551 scrap
Hi All,
Can we include the scrap information from production and scrap from movement type 551 into a single BW report?.......My assumption is we cannot include it into a single report coz production scrap will have a different material information and scrap from movement type 551 will have a different material information..please correct me ig i am wrong......
Regards,
Shravanihello,
you can have a single report by two options
1. have a variable on movement type.If you choose 551..U will get materials of tht movt type.
also if the select teh movt type for prodcution, it wil display its materials.
or
2. U have to place movt type in the rows.Place movt type and then material in the rows.
Then u will get for each movt type..its corresponding materials.No variable selection needed here.
Regards,
Dhanya -
Use a different movement type for Scrap in Production Order Confirmation
Hello gurus. I have the following question.
Is it possible to have the "Scrap" quantity during Production confirmation in a separate movement type?
Currently, when I type in the "Yield" and "Scrap" quantities, both of them are summarized into one backflush line under Movement Type 261. So for example: Yield: 10 pieces and Scrap 5 pieces; I only get one Goods Movement for 15 pieces with MvT 261.
The requirement is that whatever is typed under "Scrap" goes on a different movement type (e.g. 551), because then it will be easy to follow (inventory-wise) how many pieces were used in production and how many were scrapped.
Is it possible?Thanks for your reply Krishna.
Well, I notice that when I type a quantity in the "Scrap" field, the difference with "Yield" is that I simply don't get the produced material on stock (in the case of the last operation with a GR for instance). I just get the backflushed quantity.
But yes, I guess in this transaction, I'm scrapping the produced material, the components are still issued. I was just wondering if perhaps they could be split in 261 for normal backflush and 551 for backflush that didn't generate any finished assembly.
Thanks for your insight.
Maybe you are looking for
-
After updating to 10.9.2 the Finder changed and I feel something is hiding - for example, I no longer seem to be able to "GET INFO" about my hardrive... only my drive and "my documents" etc... maybe this has something to do with not being able to fin
-
My web pages appear out of alignment on small screens.
Hi, My web pages are correct on my large monitor but, the right side of the pages go out of alignment on smaller screens such as my laptop or even if I reduce the window size of my monitor. I used a 2 col, hdr, ftr, liquid layout in html 5. I did a b
-
Function module to list out a report's input/output parameters
Hi experts, I'd like to know if there is a function module which can list out all the input and output parameters (variables, tables, etc.) by giving the report name as input. If not, please suggest a way to find out the input/output parameters. Rega
-
Dear all, i am using apex 4.2.2 under oracle 11g R2 11.2.0.1.0 - 64bit database using internet explorer on windows 7. I have a cascading LOV problem. i have already open and close on thread for it. Re: CASCADING list not available for detail block no
-
Open an Excel file to read and load it into Oracle - Oracle COM Automation
Hello All, Please I need your help for this problem: I need to load Excel sheet data (read the data) and load it into Oracle database (insert into a table), the excel file created and has data before, and saved with xls format. and I need to do that