Movement types and inspection lot origin??
Hello Friends
I can have a look in Movement type & can find it's inspection lot origin but i want to know for particular inspection lot origin what all movement types are assigned?
Regards
Prashant Gupta
Hi;
The most truely answer is,
till 4.5B, active table is: T156S
beginning from 4.6A, active table is: T156SY
for stock related transactions, it's decided in fm: MB_CONTROL_MOVETYPE_GET
beginning of row 151.
There is also an enhancement.
Similar Messages
-
Movement types for i lot origin 08
Hallo,
which movement types are relevant for inspection lot origin 08? Where can I configure which mvmt type triggers an inspection lot? Is this config plant-dependent?
Thanks!
JessicaHi
This is not plant dependent setting.
In the step SPRO>QM>Qulity inspection> Inspection lot creation>Inspection for Goods movements.
Normally all stock transfer movements are configurd for 08.
In this stpe , if you want to deactivate any movement type , you can fo so.
Hope it is clear.
Regards
YMREDDY -
hi,
how to assign inspection lot origin for newly created goods movement. is it possible in goods movementGo to SE12
enter T156sy
Display
Utilities-Table contents-display
execute
Double click on the Movement type
Assign Inspection Lot origin here
Note:-This is not standard SAP .But if this is absolutely necessary then you can use this .
Hope this helps
Naik -
Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
Reference discussion: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
If you only have two inspection types, you can mark one as preferred. Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002. Appreciate if you could shed some light on this.
Best Regards,
CY
Branched from older discussion by moderator. When there are questions concerning an older discussion, please create a new discussion with reference to the older one. Thanks!Yes.. you are correct. But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement.
You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done. You'd also probably only execute the logic if QKZ is "X".
Craig -
Assigning inspection lot origin to new movement type
Dear Gurus,
I have created a new movement type. How do i assign inspection lot origin to this new movement type?
Regards,
AbhishekDear Sujit,
We are using inspection lot origin 06 for customer returns. However 06 doesn't allow you to post stock. The quality team wants to post the stock to unrestricted or scrap or blocked as per the inspection result. If we use inspection lot origin 05 then we are able to post stock for the inspection lot generated while transferring the stock form returns to quality. Now the problem is for prodn GR that is for FG we r using 05 for the same material. So there is a clash as inspection characteristics for FG and customer return is different but usage is becoming same-5. That's we are trying to create a new movement type 957 by copying 457 but we are unable to create and assign inspection lot origin to it.
Regards,
Abhishek -
Maintain new inspection lot origin and assign inspection types
Hi,
I want to Maintain new inspection lot origin and assign inspection types .For Ex: 90, NoRange: 90 DCr :001 ,TL Type : S and Stat : 4 because i want to maintain TL Tpe S- reference operation set.
Please provide me the solution.
Regards,
Niyas.Hi
As per SAP std You can not create a Inpsection lot origine but you can certainly create a Inspection type.
Just a suggesion..
Try Inspection lot origin: 89 (Misc) NoRange: 90 DCr :001 ,TL Type : S and Stat : 4
and create Inspection type 90 with varient 01/02 in inspection lot origine 01.
This will solve your purpose
Regards
Sujit -
What is difference between inspection lot origin 05 and 06.
Hi,
What is difference between inspection lot origin 05 and 06.Please give me suitable business example.What is difference between inspection lot origin 05 and 06.
Dear Both are used for sales return delivey inspection purpose.
05 is stock relevant and 06 is non stock relevant in 06 inspection type you won't get any stock posting screen.
For example and more useful info.check this thread:
Re: QM Sales Return Process
Cheers
KK -
QM Manual Inspection Lot - with Inspection lot origin 89
Hi QM Guru,
I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
No valid inspection type for material 10000037 was found or selected
Message no. QA280
Diagnosis
An active inspection type for the material 1XXXXXXX in plant XXXX could not be found for the specified origin 89 or none of the available inspection types was selected.
System Response
Inspection lots cannot be created.
Procedure
Check the inspection type setting in the material master.
Is there anything which i missing ?
Thank you.Hi,
I hope you have got the answer for this query. You get this error because you are trying to create a manual inspection lot (origin 89) of a material for which Inspection type 89 is not activated.
From your statement,
I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
It is clearly stated that you are using different inspection types. As Rama has suggested, activate Inspection type 89 in the material master and make corresponding master data.
Other than that, you cannot create manual inspection lot for the origins 10, 11, 12, 13 & 14. Similarly, Automatic inspection lots cannot be created for origins 07, 15 & 89. This answers your further query raised in the thread.
ntn -
Inspection lot origin don't work in COA
Hello All,
I have created a COA Profile (QC01), Where in I have assign inspection type 89 in the field "Insp.lot origin" and "Inspection Type". Now as per the F1 help suggest I am expecting that system will not allow me to print COA for those lots don't belongs to inspection type 89, but surprisingly it allows to take print out for inspection lot origins for 01, 08 types also.
I am using the STD COA form "QM_QCERT_01"
Taking print from QC21
Pls let me know what and/or where I am missing something!!!!!!!
Regards,
SAPierDear,
SPRO > QM > Quality Certificates > Certificate Profile > Define Certificate Types
SPRO > QM > Quality Certificates > Output Determination > Define Condition Types for Output Determination
Standard is Form QM_QCERT_01 you will get it in SE71.
Logistics > Quality Management > Quality Certificate > Outgoing > Certificate Profile (QC01
COA is printed in QC20.
Also refer this nice article by Expert Gajesh,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9002247f-4b7f-2c10-10ac-c6fe29807331?quicklink=index&overridelayout=true
Hope it will help you.
Regards,
R.Brahmankar -
Connection between Inspection lot Origin & UD code
Hi Friends
This is a QM issue .
When We maintain UD code in SPRO Quality Management --Maintain Catalogs it is generally for combination of plant & the code
But a code which I had maintained for a Plant is not appearing for Inspection lot origin 89 (AD-Hoc)
Is there a connection between Inspection Lot Origin & UD code ??
Thanks
ArindamDear,
To get the UD code folow the steps as below
QS41 - Edit - create catalog group and code (catalog type = 3)
QS51 - Edit - Create selected set - here we are linking plant and catalog group/code created above
Here give the valuation correctly with follow-up action
In SPRO - Quality Management>Quality Planning>Quality Inspection>Inspection Lot Creation>Maintain Inspection Types
for a insp type for which you want the above code to be appeared, in the Inspection lot processing UD selected set file give the above selected set group, so that the selected set group will appear when you go for UD
Coem back if required -
Manual Inspection Lot for Inspection Lot Origin '04'
Dear SAPians,
We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material for the Specified Origin. I feel that there is some customizing issue. Please suggest.
ThanksYes Atul,
The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
The system will ask you for the Order number.
NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
Regards,
Shyamal -
Automatic Inspection lot not generated for Inspection lot origin 12
Hi all,
I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
Please let me know i am missing something?
RegardsHi,
You are missing 1 Config
Quality Management
Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
mantain inspection origen agenist Delivery type u are using.
also you need to create Sales Info record(QV51)
I hope all other settings are OK then it should work
Edited by: Jayashankardm on Jan 6, 2010 9:59 PM -
Creating new inspection lot origin via SPRO
Hi guys.
I would like to know how to create new inspection lot origin via SPRO.
I tried going via SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection types , but could not find the way.
Thanks in advance.Hi,
You should 1st create/define the inspection types in OQL1 for your needs then you should assign them to locations.
Have you defined your inspection types?
Check n revert
Shiva -
Collective UD for 04 inspection lot origin
Hi All,
I need to know about collectived UD for 04 inspection lot origin. In QA16, I do not get any 04 lots. Do I have to go for QA41? Then what are the prerequisites and configurations?
Thanks in advance!Hi Sujit,
I tried this and made a variant in QA41 too. But some its not working. I searched in google and SDN and found all steps are followed, but its just not working.
My settings are:
1. Auto UD time taken as 12 hours in customizing
2. Auto UD box ticked for material
3. In QA41, created a variant (In full screen)
4. Inspection lot selection taken as order confirmed
5. UD codes, plant all set
Now what i feel i am mistaking in scheduling the variant. Can anyone please let me know the steps to schedule it?
My scenario is: for 04 type materials, I want to do a collective UD when lots are OK
And Do I have to assign to any material?
Thanks!
Edited by: SAPQM11 on Sep 15, 2010 8:00 AM -
Sales order and Inspection Lot relation
Hi All,
How can we find relation between Inspection lot and its coresponding sales order?
Thanks and Regards
NazmulHi Nazmul,
you can find the can we find relation between Inspection lot and its corresponding sales order with the help of QA32 Inspection lot list
Give inputs like : material / Plant / inspection lot origin and all where we can find out inspection lot number
i hope it will helpful for you
Thanks
Maybe you are looking for
-
Error: Burner is in use by another application
Hi everyone! I just tried to burn a CD for the first time in a while and receive an error stating that the "burner is in use by another application." I have no other applications running at this time and am running iTunes 11.01. Is there something t
-
550 Requested action not taken: mailbox unavailable (from website form)
Hi there. I hope somebody can help me with this one. We are running an Exchange 2010 server. We also have a website hosted externally where users can submit info via a form. The website form sends an email to [email protected]. It has been working
-
Blank screen, Intel Mac mini, Samsung P23700 LCD monitor; HELP!?!
I just got a new 23" Samsung LCD monitor and hooked it up to an Intel Mac mini. Turning on the system results in a blank screen with the monitor simply displaying a dialog box that seems to show that it is trying to figure out if the incoming signal
-
Readback_hw_cfgmem Error
Hi Pratham, readback_hw_cfgmem -all -file /home/huse/Desktop/readback.rbd [current_hw_cfgmem] invalid command name "current_hw_cfgmem" i am using vivado 2014.4 in case it is important. Regards
-
Bluetooth is suddenly not available anymore!
bluetooth is suddenly not available anymore! and i can`t find it in the systemeinstellungen