Movement types for dismantling an equipment and putting in store
Hi All,
I am using refurbishment scenario.
I have a equipment with material number and serial number. First I have to dismantle it from functional location.
Q. Now my requirement is that I have to put that material in store in valuation type C3.
At the time of installation material had C2 valuation type so now when I am putting it back to store via IE4N with 501 movement type it is allowing me to post only in C2 valuation.
Q. What is the standard procedure to put the material in store in C3 valuation type after dismanlting. Which movement type is used?
Sundar
Hi Mohammad,
I have maintained all valuation types also those are assigned. Material also has all three valuation types C1, C2 & C3.
I want to know the standrad procedure (alongwith movement types) before refurbishmen process starts.
Whether material is sent to store in same valuation type i.e. C2?
Or material is sent directly in C3 valuation type?
Or material is first sent in C2 type and then transferred to C3 type?
Sundar
Similar Messages
-
Movement Types for Receipt and Consumption
Dear all,
I am an ABAPER.
My requirement is to develop a Material balancing report.
In which i have to display
Opening Stock
Value
Receipt
Value
Consumption
Value
Closing stock
Closing value
for a material.
Here I need to know the table and fields for the above mentioned output fields.
Particularly i need to know what are the
movement types for Receipt and
movement types for Consumption
Can anyone let me know?
Regards,
Premhi,
few reports are:
MC45 INVCO: Analysis of Usage Values
MC46 INVCO: Analysis of Slow-Moving Items
MC47 INVCO: Analysis of Reqmt Values
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MB51......
TAbles:
MVER - Material consumption.....
MARC Plant Data for Material
MARD Storage Location Data for Material
MSLB Special Stocks with Vendor
MSPR Project Stock
MKOL Special Stocks from Vendor
MSKU Special Stocks with Customer
you can see al the mvt types in T156 table...
Hope it helps...
Regards
Priyanka.P -
How and where to define movement type for O4G1 or O4H1
Hello.
When Loading confirm(O4G1) and Delivery confirm(O4H1), some movement types create.
For example,
After Loading confirm 311->647->101.
After Delivery confirm 309.
How and where to define movement type for O4G1 or O4H1.
Please, answer to me.
Good day~!Hi Bulk shipment type and intransit posting group will determine the Movement type.
For Define bulk shipment type ;
SPRO => Industry Solution Oil & Gas (Downstream)=>TD (Transportation and Distribution) =>TD Bulk Shipment => Define bulk shipment type
For Define intransit posting group :
SPRO => Industry Solution Oil & Gas (Downstream)=>TD (Transportation and Distribution) =>TD Bulk Shipment =>Intransit Stock =>Define intransit posting group. -
Movement Type for Good Issue and Good Consumption in Table S032
Hi Gurus,
Would like to ask what are the movement type used in Good Consumption and good issue in Table S032.
Thank you in advance
Best Regards,
Julius CalugayHi
If a goods movement is an goods issue and if its going to reduce the inventory stock/value (goods issue posting causes an update of the consumption statistics of the material) , then its going to be an goods consumption also - ex. issue to a cost center/order
If a goods movement does not affect the inventory value but change in stock, then its only a goods issue - ex. transfer posting
If a goods movement is not an goods issue, but it reduces the inventory stock/value, then its only a goods consumption - ex. receipt of materials in a subcontract PO, here the raw materials is assumed as consumed for the finished product receipt.
Thanks !
E.Avudaiappan -
Report based upon material type against movement type for a period ?
i need a inventory report which should be based upon materil type & movement type for a particular period.
For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
thanks
samHi,
You can create a small program to get report.
Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
Add the below fields to out put
MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
Please take advise from ABAPer regarding prog logic
Thank you,
Anand K -
To find movement type for goods receipt
Hi,
Can someone tell me how to find the movement type for all the special stocks for goods receipt except 101. I am searching manually from MB5B tcode for all the special stock for specific client but its too hectic process to find manually all the goods receipt in this way .
Any table / way to find the movement type used for goods receipt please suggest.Hi,
I don't think MB5B the best report to analize goods movement...
1. Try MB51 and set "not empty" for special stock indicator. Which movement means GR and which does not...good question...
You should know what you are looking for...(see point two)
2. Using SE16 + MSEG you can analize your goods movement: MSEG-BWART (movement type) and MSEG-SOBKZ can be used to select relevant goods movement.
In MKPF you will find two indicators: MKPF-BLART and MKPF-BLAUM (GR against PO is identified by MKPF-BLAUM""WE") - you can use these somehow...but in my opinion the best is if you collect all the movement types that means GR at your comapny and put them in MSEG-BWART as selection criteria...
(if you want to use MKPF and MSEG you have to build a query in SQVI or in SQ01/SQ02).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 12, 2009 5:27 PM -
Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
ThanksWarehouse managment has its own movement types, most identical to inventory management movement types.
These WM movement types are determined via reference movement types.
the error you have just looks like your customizing is not complete.
IMG > LE > WM > Interfaces > IM > define movement types. -
Ref.mov.type for WM
I am getting an error message 'Error while determining ref.mov.type for WM via Table 156S: 101/ / / /B/X/ ' while creating inbound delivery. Is anyone acquainted with such an issue? Can you please advice?
I have checked all the config for movement type definations. Everything looks ok. Please let me know if there is a fix.
Thanks!Hi Avi,
I think, you didn't get me ...
In the above configuration what I explained, all you need to do is just adding the ref mvt type the one that is missing...it must be currently blank because of which the error what you posted is appearing. All that you need to do is just add the ref mvt type for the line as explained....
Remaining checkboxes, indicators etc....you are not even expected to be able to change....
What it means? for mvt type 101 of IM, when a material related transaction GR posting happens, for the material type used for setting up the material, in the plant of your concern, when there is no value and qty update is active in material type config, and which is not of special stock related posting, but referencing B - Purchase Order, of Transfer Type ie, stock transfer PO, the corresponding Ref Mvt type required to process further in WM, is missing in IM mvt type assignment (T156)...
Regards
Regards -
Error while determining ref.mov.type for WM via table 156S:601///
Hi SAP gurus
while doing delivery i am getting error like
Error while determining ref.mov.type for WM via table 156S:601///
please give me needful solution
regards
SarveshChk via
SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
maintina the correspoding entries..
BR,
Krishna -
Creation of new movement type for Goods Receipt
Is it possible to create a new movement type same as 101 (goods receipt)? We need to create a separate movement type of 101 for the purpose of separating G/L account to be used for local and importation purchases. Or is there any other way to separate the G/L account for GR of local and importation purchases without creating a new movement type?
You can create new Mvt type by copying Mvt type in OMJJ trxn ..
Please follow the following steps
Check whether you can use the preset movement types.
If not, define new movement types as follows:
1. Once you have carried out the activity, the system displays a dialog
box for field selection. In this, you can restrict the movement
types you work with to various fields. To copy a movement type,
select the field Movement type and choose Continue. The dialog box
Define work area appears.
2. In the dialog box Define work area, enter the movement type you want
to copy in the From: field. In the To: field, enter the name of the
new movement type you want to create. To go to the overview of the
selected movement types, choose Continue.
3. Select the movement type you want to copy, and choose Edit -> Copy
as.
Overwrite the selected movement type with the new movement type
(beginning with 9, X, Y, or Z) and copy all dependent entries.
The system copies all control indicators from the reference movement
type to the new movement type.
4. Check all views for the new movement type and, if necessary, change
the control indicators. Please note that some views have a detail
screen.
5. Copy the reversal movement type and enter it in the view
Reversal/follow-on movement types.
6. Save your settings. -
Movement type for transfer of stock from Stock-in-transit to Vendor
Hello,
Is there any movement type for transfer of stock from Stock-in-transit to Vendor.
For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO Modified) -> Delivery (VL04) -> MIGO (Goods Receipt against Delivery) method.
The problem arises when the actual delivery quantity is less then what is entered in the system (due to clerical error). That is, physically less quantity were dispatched and received at the receiving plant. Now the balance quantity is lying as stock-in-transit. To clear it we are receiving the material and using transfer posting for plant to plant transfer. Though physically there is no transfer of goods. Now we do not want to receive the material instead we want it to transfer from stock in transit to the supplying plant. Is it possible ?
Thanks.
AshishHi Ashish,
When You issue the stock, the accounting document is posted . There is no accounting entires when you do Goods receipt at receving plant . In case , we are developing to make it happen , I feel it may have impact on the Material Valuation aspects .
Hence, I feel it is better to adopt any of the following 2 options.
1) Cancellation of the entire delivery and make new delivery or 2) Receive the entire qty at the receiving plant and decide what you want to do with the unavl qty . For example in your case of loss of material due to accident , you can scrap the material in the receving plant itself or return the material back to the sending plant.
Regards
Mani -
Movement type for free of charge good issue
Hi,
Does anybody know what is the movement type for free of charge good issue??
I want to know the equivalent movement type of good receipt 511 (delivery w/o charge) but for good issue.
Thanks.Hi,
Thanls for your reply but this is not what we need.
We want to do a manual good issue without charge and we don't know what is the correct movement type we have to use.
I have tried to use 601 in mb1a transaction but an error has appeared: "Goods movement not possible with mvmt type 601"
I think we need the equivalent movement of good receipt 511 but for good issue.
Thanks!! -
Different movement types for goods issue via outbound delivery
Hi gurus,
How can I use different movement types for goods issue via outbound delivery?
Thanks&Best Regards,
BurcuTo use different schedule lines, we need different item types and different document types. Is that right?
Is there a user exit in outbound delivery to post goods issue?
Thanks... -
Different movement types for Goods Issue for different Order Types
Hello Experts,
Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
Thanks and regards,
SatyajitSatyajit,
Folow the link given,
Re: How to add new movement types when creating reservation?
Hope this helps you.
SmanS -
URGENT: movement type for blocked (rejection) qty to unrestricted
at the quality we reject the material and the material is blocked.
but now we want to transfer that blocked material to the unrestricted stock and then unrestricted to scrap.
plz provide the necessary steps and the movement types for this
its very urgent
plz help.Mov Type: 343(Blocked to UR)
Mov Type : 551 (UR to SCrap)
Tran Code: MB1B
Edited by: PP Consultant on Dec 18, 2007 8:10 AM
Maybe you are looking for
-
Returns PO based on Return sales order - schedule line problem
Hi, We're designing a return to vendors process as the opposite of a purchasing process through a plant. So normally the process is: Customer places order We buy from the vendor (PO based on sales order) Goods arrive at the plant We deliver from plan
-
If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?
-
Trying to use bind variables with a list
I have the following dynamic SQL statement which I'm trying to convert to use pure bind variables. the variable "v_list" is a string that gets filled dynamically with a list of numbers so it can be used in an expression "IN (<expr>)". The number of e
-
How to track WCM Operaional WCD changes
Hello, We are in stage of implementation of Work clearance Management (WCM). There is requirement to track change history of operational WCD attached to isolation application. Maintenance person proposes isolation and operations person prepares the
-
1. REUSE_ALV_VARIANT_DEFAULT_GET 2. REUSE_ALV_VARIANT_F4 3. REUSE_ALV_VARIANT_EXISTENCE 4. REUSE_ALV_EVENTS_GET 5. REUSE_ALV_COMMENTARY_WRITE 6. REUSE_ALV_FIELDCATALOG_MERGE 7. REUSE_ALV_LIST_DISPLAY 8. REUSE_ALV_GRID_DISP