Movement types for i lot origin 08
Hallo,
which movement types are relevant for inspection lot origin 08? Where can I configure which mvmt type triggers an inspection lot? Is this config plant-dependent?
Thanks!
Jessica
Hi
This is not plant dependent setting.
In the step SPRO>QM>Qulity inspection> Inspection lot creation>Inspection for Goods movements.
Normally all stock transfer movements are configurd for 08.
In this stpe , if you want to deactivate any movement type , you can fo so.
Hope it is clear.
Regards
YMREDDY
Similar Messages
-
Movement types and inspection lot origin??
Hello Friends
I can have a look in Movement type & can find it's inspection lot origin but i want to know for particular inspection lot origin what all movement types are assigned?
Regards
Prashant GuptaHi;
The most truely answer is,
till 4.5B, active table is: T156S
beginning from 4.6A, active table is: T156SY
for stock related transactions, it's decided in fm: MB_CONTROL_MOVETYPE_GET
beginning of row 151.
There is also an enhancement. -
Movement type for stock transfer from investment order to the regular stock
Hi,
Is there any movement type for the transfer from investment order to storage location stock? We have wrong created purchase orders, where the GR transferred the items to the investment orders. The problem is, that there already a lot of invoices posted on this items..
Is there any clever solution?
Points granted,
SasoHi
In MTO scenario the stocks are manufactured for the particular sales order and in MMBE the stocks are managed as sales order stocks assigned to that particular sales order no
This is due to the sales order item cat in MTO carrying specal stock indicator as E
Opening these stocks to unrestricted is meaningless and not possible because costing and all would have been done according to the sales order
Non MTO scenario
+Note MTO stocks are different and sales order stocks are different+
All MTO stocks are managed as sales order stocks
But not all sales order stocks are MTO stocks
But if you want move the stocks from a sales order to unrestricted then MB1B movement type 411 E
Moving stocks from one sales order to another sales order MB1B movement type 413 E
Regards
Raja -
Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
ThanksWarehouse managment has its own movement types, most identical to inventory management movement types.
These WM movement types are determined via reference movement types.
the error you have just looks like your customizing is not complete.
IMG > LE > WM > Interfaces > IM > define movement types. -
Movement Types for Receipt and Consumption
Dear all,
I am an ABAPER.
My requirement is to develop a Material balancing report.
In which i have to display
Opening Stock
Value
Receipt
Value
Consumption
Value
Closing stock
Closing value
for a material.
Here I need to know the table and fields for the above mentioned output fields.
Particularly i need to know what are the
movement types for Receipt and
movement types for Consumption
Can anyone let me know?
Regards,
Premhi,
few reports are:
MC45 INVCO: Analysis of Usage Values
MC46 INVCO: Analysis of Slow-Moving Items
MC47 INVCO: Analysis of Reqmt Values
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MB51......
TAbles:
MVER - Material consumption.....
MARC Plant Data for Material
MARD Storage Location Data for Material
MSLB Special Stocks with Vendor
MSPR Project Stock
MKOL Special Stocks from Vendor
MSKU Special Stocks with Customer
you can see al the mvt types in T156 table...
Hope it helps...
Regards
Priyanka.P -
Ref.mov.type for WM
I am getting an error message 'Error while determining ref.mov.type for WM via Table 156S: 101/ / / /B/X/ ' while creating inbound delivery. Is anyone acquainted with such an issue? Can you please advice?
I have checked all the config for movement type definations. Everything looks ok. Please let me know if there is a fix.
Thanks!Hi Avi,
I think, you didn't get me ...
In the above configuration what I explained, all you need to do is just adding the ref mvt type the one that is missing...it must be currently blank because of which the error what you posted is appearing. All that you need to do is just add the ref mvt type for the line as explained....
Remaining checkboxes, indicators etc....you are not even expected to be able to change....
What it means? for mvt type 101 of IM, when a material related transaction GR posting happens, for the material type used for setting up the material, in the plant of your concern, when there is no value and qty update is active in material type config, and which is not of special stock related posting, but referencing B - Purchase Order, of Transfer Type ie, stock transfer PO, the corresponding Ref Mvt type required to process further in WM, is missing in IM mvt type assignment (T156)...
Regards
Regards -
Error messag -'Error while determining ref.mov.type for WM via Table 156S:'
Hi Guys,
I am currently facing some issues with respect to the deliver creation.
The scenario is somthing like this.
I have assigned a FOC Item category to an Consignment Issue order type.
The system is able to determine the Item category successfully.
However when the delivery is created it throws an error message
'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
Not sure why this occurs.
All the settings seem to be set.
If any one of you can help me out it would be great.
Thanks.
Regards,
PandiDear Pandiraj
The standard process is that consignment issue order should be created with reference to Proforma invoice. Having said that I dont understand why you have assigned a FOC item category to issue order. Not sure, whether this will work. Also I feel that you should explain in detail the process for which you are configuring this.
thanks
G. Lakshmipathi -
Error while determining ref.mov.type for WM via table 156S:601///
Hi SAP gurus
while doing delivery i am getting error like
Error while determining ref.mov.type for WM via table 156S:601///
please give me needful solution
regards
SarveshChk via
SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
maintina the correspoding entries..
BR,
Krishna -
Movement type for transfer of stock from Stock-in-transit to Vendor
Hello,
Is there any movement type for transfer of stock from Stock-in-transit to Vendor.
For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO Modified) -> Delivery (VL04) -> MIGO (Goods Receipt against Delivery) method.
The problem arises when the actual delivery quantity is less then what is entered in the system (due to clerical error). That is, physically less quantity were dispatched and received at the receiving plant. Now the balance quantity is lying as stock-in-transit. To clear it we are receiving the material and using transfer posting for plant to plant transfer. Though physically there is no transfer of goods. Now we do not want to receive the material instead we want it to transfer from stock in transit to the supplying plant. Is it possible ?
Thanks.
AshishHi Ashish,
When You issue the stock, the accounting document is posted . There is no accounting entires when you do Goods receipt at receving plant . In case , we are developing to make it happen , I feel it may have impact on the Material Valuation aspects .
Hence, I feel it is better to adopt any of the following 2 options.
1) Cancellation of the entire delivery and make new delivery or 2) Receive the entire qty at the receiving plant and decide what you want to do with the unavl qty . For example in your case of loss of material due to accident , you can scrap the material in the receving plant itself or return the material back to the sending plant.
Regards
Mani -
Movement type for free of charge good issue
Hi,
Does anybody know what is the movement type for free of charge good issue??
I want to know the equivalent movement type of good receipt 511 (delivery w/o charge) but for good issue.
Thanks.Hi,
Thanls for your reply but this is not what we need.
We want to do a manual good issue without charge and we don't know what is the correct movement type we have to use.
I have tried to use 601 in mb1a transaction but an error has appeared: "Goods movement not possible with mvmt type 601"
I think we need the equivalent movement of good receipt 511 but for good issue.
Thanks!! -
Different movement types for goods issue via outbound delivery
Hi gurus,
How can I use different movement types for goods issue via outbound delivery?
Thanks&Best Regards,
BurcuTo use different schedule lines, we need different item types and different document types. Is that right?
Is there a user exit in outbound delivery to post goods issue?
Thanks... -
Different movement types for Goods Issue for different Order Types
Hello Experts,
Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
Thanks and regards,
SatyajitSatyajit,
Folow the link given,
Re: How to add new movement types when creating reservation?
Hope this helps you.
SmanS -
URGENT: movement type for blocked (rejection) qty to unrestricted
at the quality we reject the material and the material is blocked.
but now we want to transfer that blocked material to the unrestricted stock and then unrestricted to scrap.
plz provide the necessary steps and the movement types for this
its very urgent
plz help.Mov Type: 343(Blocked to UR)
Mov Type : 551 (UR to SCrap)
Tran Code: MB1B
Edited by: PP Consultant on Dec 18, 2007 8:10 AM -
Movement Types for Material Reservations
Dear All
I have defined New package for defining new movements types for material reservation in PM order. this activity is carried out at following path.
SPRO> Plant Maintenance and Customer Service>Maintenance and Service Processing--> Maintenance and Service Orders >General Data>Define Movement Types for Material Reservations.
This has been carried out as i want to take the material in using 904 movement as reversal of 261.
Can any body tell me where can I assign tghis package to Order/order types?
Regardshi
In the standard system, movement types are preset which you must not change.
For the components, Plant Maintenance and Customer Service, the entry with the key 'IWO1' is relevant. In addition, you only need the two entries for the goods issue (GI) of materials for maintenance orders and the accompanying reverse operation (GI cancellation).
as of my knowledge we don't have the option to go with ordertype wise settings
-AShok
Edited by: Ashok Keerthipati on Nov 19, 2008 5:57 PM -
Reference movement type for transfer in warehouse mgmt
Hi ,
In the warehause management system, IM movement type is link to WM movement type.
Maintenace veiw V_156S_WM ( Table 156SC ). IM movement type 321 has three reference movement type in WM.
396 , 397 , 321 .
Again through table T321 ( veiw V_T321 ) reference Mvt 396 is link to 311 in WM , 397 link to 312 in WM and 321 to 321 In WM.
If i perform 321 movement in IM , then how the system will determine unique reference movement from table
V_156S_WM ( Table 156SC ) .
Thanks
SanjayHi,
The stock tsf ref mvnt type in V_156S_WM(-UMRBL) is:
Reference movement type for transfer in warehouse mgmt
Reference movement type for the second transfer in the Warehouse Management system.
Use
This reference movement type is necessary when a goods movement (stock transfer) in Inventory Management causes two transfers in the Warehouse Management system (stock removal from one storage type and stock placement in another).
Inventory Management movement types that do not initiate any activity in the Warehouse Management System have the reference movement type 999.
The ref mvnt type in V_156S_WM(-RBLVS) is:
Reference movement type for WM from material movements
Reference key for determining the movement type in the Warehouse ManagementSystem.
Use
Each Inventory Management movement type that is relevant to the WM system is allocated to a reference movement type, with which the system determines the corresponding movement type in the WM system.
Using the reference movement type, you can group together Inventory Management movement types that result in the same movement in the WM system.
Inventory Management movement types that do not initiate any activity in the Warehouse Management System have the reference movement type 999.
...sorry, basic help text.
Cheers,
Hein
Maybe you are looking for
-
I need to load an InfoCube from an InfoSet - Is this possible in 2004s?
Greetings, <b>This question looks long, but it's really not. I'm just trying to give a lot of detail about the screens that I am seeing. Anyway, here goes:</b> I am in 2004s. I want to load an InfoCube from an InfoSet. I know that an InfoSet is j
-
Two phones one apple account how do I stop imessage from one going automatically to the other?
two phones one apple account how do I stop imessage from one going automatically to the other?
-
Can I change the fonts, size of a particular column in APEX using a html template report? Edited by: user6008552 on Sep 9, 2008 3:24 PM
-
Re: Including Applet in JSP with Dynamic input| Help needed
Hi All, We are into a project in Oracle Portal Server where in we want to embed a result of a standalone application in Portal page. We can do that once we can embed the result of the standalone application which generates applet based on the input i
-
I record interviews on GarageBand. Is there a way to transfer audio to text?
I am a writer and conduct telephone interviews, recording them with GarageBand. Is there some software, or a way to transfer the audio I record directly to text?