Movement Types - how to change determined Movement Types in Delivery Creati

hi,
Is there any way "material movement type" can be changed once its been determined in the delivery, or durin delivery creation (after creating the sales order)
is it possible to override the material movement type creation, (apart from the control which we get by the schedule item category field).
Is there any way to change the material movement type in a deliver document  ?
thanks any help would be truly helpful.

Hi Authi
That could be correct. If all the conditions are known at the time of sales order then you can try and use the MV45AFZZ and form to move data into VBEP and move a different schedule line category that has a different movement type. Please check this option and it would work. We used it in a couple of situations in our client here. You need to configure and assign the schedule line category as manual one in the config.
Reward if this helps.
Thanks

Similar Messages

  • How  to change the billing type Rv to DG

    Dear all,
    when ever we are doing the return order to a sales we will create a customer credit memo through the VF01 T-code.where billing type will be customize one that is credit memo..
    once we save that the in customer G/L we are getting the document type as RV instead of DG.
    please tell me how to change the document Type in customer Ledger.
    regards,
    chethan

    Hi,
    Just to draw your attention that DG is doc.type used to issue credit memo from FI (t.code FB75), where it does not involve the inventory movement.
    Whereas the credit memo generated from OTC cycle (i.e.VF01) involves inventory movement. Ideally, both of these types of credit memos should have different doc. types, so that users can distinguish the returns based on doc. types later on.
    So, after explaining the above, please check with your business thoroughly if they really need to use DG instead of RV. I would suggest to create new doc. type 'ZC' and set up through VOFA.
    Thanks,
    Nirav

  • How to change the file type from IMOVIE PROJECT to other types of file

    how to change the file type from IMOVIE PROJECT to other types of file??
    thank you very much for your help=]

    I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
    Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

  • How can I determine the type of video out connector I need?

    Howdy,
    I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
    System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
    Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
    http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
    and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
    I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
    Thanks for any help,
    Zebulon T

    Thanks, Ded,
    You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
    Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
    Thanks very much.
    Zeb T

  • How to change the paper type in printer settings?

    Does anyone know how to change the paper type in printer settings?  I'm trying to have the ability to change it to photo paper from Photoshop Elements.  I can't find the option in printer settings or through Elements.  I'm assuming I could save an additional printer setting for photo printing, but can't find how to even select a different paper type.
    thanks!

    It would help to know which OS you are running as the answer will be different if it's Lion or the previous OS's. You are not running iOS 5.0.1 on your MacBook Pro so provide the correct information.

  • How to change the document type while creating a PO by ME59N

    Hi,
    I  have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
    How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N? 
    Can any one suggest me.

    Hi,
    There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
    SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
    This will serve your purpose.
    Thanks,
    Srinu

  • TS3354 HOW TO CHANGE HD MOVIES INTO REGULAR MOVIE

    how to change hd movies on itunes to regular movies

    iTunes automatically syncs HD videos (if they exist in your library) unless you check "Prefer standard definition videos" in the iTunes iPad Summary tab.

  • How to change the project type of inprogress project

    How to change the project type of in-progress project, The project type is Testing and need to change it to basic project plan.

    Another way is to click on the top right button of the project center ribbon, after selecting the project. Note that this way works for one project at a time whereas toon's reply works for bulk edit.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, MCP |

  • How to change the task type of bdoc in sap crm

    Dear CRM Experts,
    I am new to CRM. Want to know how to change the task type  of Bdoc from update to insert. I am gettind B doc error due to the reason that under object_task the entry is U , whereas i have to change it to I (insert).
    Pls provide deatil answer. Points will be given.
    Regards
    Rajat
    Edited by: Gurinder Pal Singh on Jul 21, 2011 10:17 AM

    Hello Rajat,
    Please provide us more information about the error you have and it's description so that we can help here arounfd here.
    thanks
    Willie

  • How to Change the NAT Type of an Apple Router

    My dad just bought an apple Router and some new modem. now since i know the router is apple company i want someone to tell me how i change its NAT Type from Strict to either Moderate or Open because its preventing me from connecting to my friends on xbox live. Im also using a Macbook Pro for a computer so its apple software an their shouldnt be any reason this cant be resolved effectively i just need a guide to tell me how to go about fixing this problem.

    Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
    The following web blog does a great job explaining the NAT issues with Xbox Live! Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
    Option 1 - Create a DMZ
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT
    Enable default host at: <Enter the IP Address for the XBox>
    Option 2 - Configure Port Mapping
    The following ports must be available for Xbox Live to operate correctly:
    UDP 88
    UDP 3074
    TCP 3074
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the Xbox 360.
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
    Click the "+" (Add) button to enter DHCP Reservations.
    Description: <enter the desired description of the host device>
    Reserve address by: MAC Address
    Click Continue.
    MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
    IPv4 Address: <enter the desired Private IP address>
    Click Done.
    2. Setup Port Mapping on the AEBSn.
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT > Configure Port Mappings
    Click the "+" (Add) button
    Service: <choose the appropriate service from the Service pop-up menu>
    Public UDP Port(s): 88, 3074
    Public TCP Port(s): 3074
    Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
    Private UDP Port(s): 88, 3074
    Private TCP Port(s): 3074
    Click "Continue"

  • HT201066 how to change a movie name on quick time player os lion?

    how to change a movie name on quick time player os lion?

    You can use the Finder app to change the file name but need QuickTime Player "Pro" version ($30) to change the "Title" (the part that shows in the upper portion of the player window).

  • How to change the order type

    Dear friends,
    Please tell me the transaction code to change the orger type.
    suppose  we have an order having type Zrox we want to change the order type from Zrox to Zmto what should I do and how can I do .

    Hi
    For single order use <b>VOV8 </b>and for Mass use T code <b>MASS</b>
    <b>
    Changing by MASS</b>
    There is transaction <b>MASS </b>which can be used to carry out mass changes in the sales order and other objects.
    Mass Maintenance: (Use to change multiple fields in multiple documents at the same time). I have done mass change for customers; and orders should work the same way too.
    1) Try t-code [MASS] and select sales orders & execute
    2) Choose the table or tables for your selection criteria and also for fields you want to change.
    Then execute. (suppose your selection criteria fields are from “sales order header data” table and the field you want to change, is in “item data” table)
    3) Put in the sales documents(21000000, 21000001) you want to change and also the items(10) you want to change. – click on ” choose selection fields” button – From the Pool, move the fields you want to the “select fields” using arrows.
    4)From mass maintenace menu, click on “Enter new field values”
    -click on “sales order item data” tab and choose the field you want to change.
    (for example. I want to change plant for item 10)
    -enter the new value (of the plant to be)
    -click on “Adopt” and execute
    5)In “sales order item data” tab, you see the new value of the plant you entered at the top and the old values of item 10 are below.
    -click on “change field values” button. you see all the old values are changed to new values.
    -save
    Note: it will take some time depending on how many records you have.
    Check: Go to [SM37] and see the status of the job you are running and once finished, export the spool file to a spreadsheet.
    Before you do mass maintenance, go to the particular table in [se16] and get the results. Then do the mass maintenance and compare the results with this one. If they match, then you are good to go.
    Note: If you have any user exits that affect the results, ask them to deactivate the MODCHECKS still you are done with mass maintenance & activate them again.

  • How to change the movie clip a button links to???

    I am working on a website in Flash that had already been
    designed by someone else. There are a number of buttons across the
    website that are linked to the same symbol. Those buttons link to
    movie clips, in the button's actions, that pop up as small windows
    providing more information in regards to the button clicked. The
    problem is that I cannot figure out how to properly change the link
    association between button and movie clip.
    Here is the action script for one of the buttons:
    on (release) {
    _root.scrHEIGHT=100
    _root.scroller.scroller.gotoAndStop(2);
    _root.scroller._x = 100;
    _root.scroller._y = 150.7;
    _root.TM_title = "About Chris Smith";
    _root.READ = 3;
    When I change the number after "root.READ =" it will change
    it to another movie clip but I how do I know what that association
    is based on? For instance if I make a duplicate movie clip how can
    I make the above script link to it? Also, what exactly does that
    last line in the above script mean? When I tested various numbers,
    like 3 and 6, they would link to the same movie clip.
    Please help! This is driving me crazy!
    Thanks!!!

    Hi,
    buttons can be defined with static icon/text, or dynamically via a variable (containing @08\Qtooltip@text for example). You choose the pushbutton type when you define your button using the screen painter. For the dynamic definition, you must tick the "output only" checkbox, enter a global variable name, that you'll fill in your program, preferably using ICON_CREATE function module.
    BR
    Sandra

  • How to change the Encoding type of a XML

    Hi all,
    I'm having a XML(generated at run time) with UTF-8 Encoding. If I'm going to parse it, getting an error saying "*Document root element is missing*".
    If I change the encoding to ANSI, it parses without error.
    How can I change the encoding type of a documnet ?
    Any comment welcome.
    Kaushalya

    There's no such thing as the "encoding of a String". If you produced a String from a sequence of bytes using the wrong encoding, you may not be able to repair that problem by hacking about in your code. You're better off to produce the String using the correct encoding in the first place. Read this for more information about XML and encodings as you appear to be misunderstanding basic concepts:
    [http://skew.org/xml/tutorial/]

  • How to change the data type in the table ESLL for the field USERF2_NUM ?

    Hello Friends,
    I have a requirement in which one of the change is to convert the data type of the field 'USERF2_NUM' in the table 'ESLL'  from 'QUAN' to 'CHAR'. 
    How do i do it if i have an access to change it..........i think i should also check the impact of the change if done.
    Kindly tell me as my requirement starts with this small change.
    Regards,
    Rajesh Kumar

    Thanks for the reply Sowmya.
    I would like to know 2 things.
    1. Is it ok to change the data type of the field 'USERF2_NUM '  which is in the table ESLL. from quan to char.
    2.  The table ESLL  already has entries. if we change the data type from QUAN to CHAR what is the  effect on the existing entries of the table .
    Kindly reply me back.
    Thanks & Regards,
    Rajesh Kumar

Maybe you are looking for

  • B/W photos

    I recently scanned a lot of old pictures into my pictures folder. I was able to import all the color pics but I keep getting the "unrecognized format" message with all my black and whites and I cannot get them into iphoto 8.1.2. What do I do?

  • Main Item not Weight/Vol relevant but adds to the total weight of the order

    Hi, I have a situation where the Main item (item category) is marked not weight/Volume relevant but the Sub item is weight/Volume relevant. But when I create a sales order the net weight of sales order includes the weight of the Main item as well. An

  • Plant creation in IS-Retail.

    Hi guys..I need you help...I create the plants in Retail by transaction WB01. I'm using the plant profile 0110 for plants (stores). But now i have the situation that plant was create as store needs turn on a distribuition center (0100 Plant Profile).

  • How to make a portlet unvisible for another(not Owners) Users?

    Hi all, I (Site-Owner) have create a little Portal-Site with any portlets. I want to make one or two portlets(Admin-Area) unvisible for other users. But when I create a portlet as Site-Owner, then all another users can they see. How to make a portlet

  • My iphone4s does not sent IMESSAGE on WIFI

    my iphone4s does not sent IMESSAGE on WIFI