Movement types & MM table

hi,
plz provide me important movement type requried in companies point of view.
as i am new in SAP MM module..i always get confuse with Movement Types & MM table..
send me important one..thank
Gaurav
Moderator message:
Locked. Reason: basic question.
Please try to search before posting, lots of resources are available on the internet.
Edited by: Csaba Szommer on Oct 28, 2011 8:54 AM

Hi
use of Movement type depend on business still following are normally use
1) 101 -Goods receipt against PO
2) 102 cancellation of 101
3) goods issue to production-261
4) goods issue against cost center -201
we can create new movement type by OMJJ t-code
check following link it will clear you
[http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm]
Important MM table
Po table
EKKO
EKPO
GRN table
MKPF and MSEG
MIRO table
RBKP and RSEG
Regards
Kailas Ugale
Edited by: kailasugale on Oct 28, 2011 11:04 AM

Similar Messages

Update control of movement type is incorrect

while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted into purchase order by me.
but when I wanted to do goods receipt against the po generated it is giving me this error in tranc migo.
ERROR IS "update control of movement type is incorrect entry (101 X X e b _ v)
the performance assist screen shows this
Update control of movement type is incorrect (entry 101 X X E B _ V)
Message no. M7226
Diagnosis
The system could not find entry 101 X X E B _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hi
Check the T code OMJJ for the defining the MVt type also check the error is coming for MVT type 101 then check with mvt type 101 in t code OMJJ and check the updation control there.
also consult your MM consultant for this error
Regards
Anupam Sharma

Movement Type 161error in STO return (Plant to Plant) at the time of goods issue .

Hi all...
Am getting the following error while posting goods issue through VL02N
Update control of movement type is incorrect (entry 161 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 161 X X _ L in any of the movement type control tables.
Process : STO Return Plant to Plant.
Purchase Order ( STO) done.
Goods issue done.
Goods receipt at the receiving plant.
Amended Purchase order, added one more line item and ticked return.
Inbound delivery done.
VL02n Goods issue am getting the error.
Pls help.
Suhas
MM consultant

Update control of movement type is incorrect (entry 161 X X _ L)
Have a look into your OMJJ customizing for 161 movement type:
It probably looks like mine:
the error message has the info in exact the same sequence
161 X X _ L
this is 161, checkmark checkmark blank L in the table above.
L would mean reference to a delivery.
But as you can see here, there is no L, everything is B which means reference to purchase order.
It is not allowed to add items in a delivery without purchase order reference, it is technically possible, but it finally ends in the error you have.
The process has to start from the purchase order.

Error during search for WM movement type (999 E )

Dear ALL,
I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
"Error during search for WM movement type (999 E )"
Could someone help me please ?
Thanks & Best regrads,
Saiful arif

Hi,
Please check the reference movement type in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
for qty updation indicator not checked, you will have reference movement type 999
qty updation indicator checked means stock / quantity controlled in which case
check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
then check for WM movement 3YY in Transaction OMLJ which should have source storage type maintained.
qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR, moreover it is no stock / qty and no stock transfers situation
If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
Please note 999 as WM movement is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
Hope this should solve your problem.
Regds
Shrihari

Trace the reference Standard movement type from customized movement type

Hi,
In my system there are few customized movement type.
Can I know which Standard movement type was used as reference to create the customized movement type.

try table t156 table .. put your mvt type and see the BUSTR field for the reference mvt

Return Delivery Movement Type Error

Hello all Gurus,
While doing a return delivery with respect to a material document with movement type 122, im getting the following error in my system:
"Update control of movement type incorrect (entry 122 X X)"
I have seen the diagnosis and it is coming as The system could not find entry 122 X X in any of the movement type control tables.
Kindly advise me how to solve this issue.
Thanks and Regards,
Umakanth.

Hi
Try customization
OMJJ
choose Mov.Type 122
and from left menu choose Update control / WM movement types
and then do relevant customiztions
Regards

Replace 601 movement with 301 movement type in outbound Delivery

Hello All,
We are using SAP - 4.6 C system.
We have a requirement to create a customer outbound delivery for a corresponding customer Scheduling Agreement but postings should be similar to 301 movement type against 601 movement
When we use 601 movement type - Material Document and corresponding Accounting Documents are created.
We do not want Material Document and corresponding Accounting Documents and at the same time should not use TSA / STO functionality
We want to use only Sales Outbound delivey fucntionality only with 301 postings.
So we tried to use 301 movement type to post an outbound Delivery and below is the error. Please advise a solution to fix this error. or an alternative approach to create an out bound delivery which should not post to an accounting document.
Error -
Update control of movement type incorrect (entry 301 X X _ L _ V)
Message no. M7 226
Diagnosis
The system could not find entry 301 X X _ L _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
u2022 For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
u2022 For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
Regards,
Siva

Hello all, Jurgen,
Thanks for your responses.
Today, we use 601 movement type for Outbound delivery which creates Material Document and Accounting Documents.
Instead of this, we would like to replace 601 with 301 movement as this has simple plant to plant transfer postings in one of our specific scenario.
We are getting below error when we do Post goods Issue on Outoubnd delivery: we just replaced SD: Schedule line category movement to 301.
Update control of movement type incorrect (entry 301 X X _ L _ V)
Message no. M7 226
Diagnosis
The system could not find entry 301 X X _ L _ V in any of the movement type control tables
Is this the correct approach? Even if we try to create new custom movement ref to 301 to fulfill 301 X X _ L _ V.
Will this work? I am sure in addition to this we need some user exit development.
Presently, this is SD Outbound delivery cycle and will continue with same approach.
we also have our regular scenarios which work with 601. This is one of our exception business cases where we need affects similar to 301.
For above case we can not use STO/TSA with some master data changes as we have already have same plants set-up for regular STO/TSA processes.
The above requirement is special case in one of the business cases.
Thanks
Siva

Movement type error for HU GR

Hi Experts,
I am trying to post GR in MFHU transaction for the HU I have created. I am getting the following error. Could you please help me resolve it. The error description I am getting is as below:
Update control of movement type is incorrect (entry 131 _ _ _ F)
Message no. M7226
Diagnosis
The system could not find entry 131 _ _ _ F in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
Regards,
Sachin

Hi,
Refer to below link should help.
Re: Error: Update control of movement type is incorrect (entry 131 _ _ _ F)
Your MM person should help you on this.
Regards,
Vivek

Which movement type use for return stock form one plant to other plant in

HI friends i am working on STO PROCESS
i need to transfer return stock from one plant to other plant as a return stock i am using Mvt type 455
but system shows following error
Update control of movement type is incorrect (entry 455 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 455 X X _ L in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
thanks in advance

Hello,
     I think there is a standard STO movement type you can use. But I can't remember. Why don't you try to find it and test if it fit your requirement?
     There are some information for your reference. Please check on website:
http://www.sap-img.com/materials/difference-for-stock-transfer-and-transfer-posting.htm
Using STO without delivery:
doc.type: UB
GI:351, GR:101
STO with delivery:
GI:641, GR:101
delivery type:NL
STO with delivery and billing:
GI:643, GR:101
delivery type:NLCC , billing type:IV
     And if you want to use the way to return the goods replenishment, try to flag the return checkbox while you create purchase order item. Of course, corresponding configuration is required.

Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
Thanks

Warehouse managment has its own movement types, most identical to inventory management movement types.
These WM movement types are determined via reference movement types.
the error you have just looks like your customizing is not complete.
IMG > LE > WM > Interfaces > IM > define movement types.

Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

Hi Guys,
I am currently facing some issues with respect to the deliver creation.
The scenario is somthing like this.
I have assigned a FOC Item category to an Consignment Issue order type.
The system is able to determine the Item category successfully.
However when the delivery is created it throws an error message
'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
Not sure why this occurs.
All the settings seem to be set.
If any one of you can help me out it would be great.
Thanks.
Regards,
Pandi

Dear Pandiraj
The standard process is that consignment issue order should be created with reference to Proforma invoice. Having said that I dont understand why you have assigned a FOC item category to issue order. Not sure, whether this will work. Also I feel that you should explain in detail the process for which you are configuring this.
thanks
G. Lakshmipathi

Error while determining ref.mov.type for WM via table 156S:601///

Hi SAP gurus
while doing delivery i am getting error like
Error while determining ref.mov.type for WM via table 156S:601///
please give me needful solution
regards
Sarvesh

Chk via
SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
maintina the correspoding entries..
BR,
Krishna

Relation between MSEG table and movement types in 2lis_03_bf

Hi all,
May i know the relation between MSEG table and 2lis_03 _bf xtractor stock type/stockcategory where we see the informarion in r/3 side for this, you answers gets rewarded.
regards,
Dan.

Hi,
Most of the data for IM comes from the tables MSEG andd MKPF. You can go to MSEG contents and see the data there. You will find all the movement types, stock types and stock categories there. You can also use the transactions MB5B, MB51 etc.. to see the related info in R/3. As I said most of the data comes from these tables but not all the data. It uses some internal programming to get the data.
Hope it helps...

CO-PA: Can we activate Movement Types in the summary table of CO-PA

Hi SAP Financials experts,
Are we able to activate Movement Types in the summary table of CO-PA when we extract into BW? At the moment, I understand that we are only pulling in YTD
Thanks

Hi
I dont think Mvt Types can be activated in COPA summary table.. Have never heard of this
Br, Ajay M

Movement Types that populate total usage quantity (MGVBR) in table S031

Can anybody tell me what material movements (Movement types) populate the field 'Total Usage Quantity(MGVBR)' in table S031? Any idea how to find out these mvmt. types.
Thanks in advance,
Satya.

Hi,
This is the field of a report.This field represents the total usage of a material on a perticular posting date.This is updated whenever a consumption happens for the material.
It is the Total of planned and unplanned consumption.
The planned consumption is updated when goods are taken from the warehouse as a result of a reservation. The unplanned consumption is updated when goods are taken without a reservation.
In the standard of Inventory Controlling this key figure is updated at the information structures S031 und S034 at the posting date.
Regards,
Rambhupal reddy

Movement types & MM table

Similar Messages

Maybe you are looking for