Movie after playing doesn't stop at the last frame.

Movie after playing doesn't stop at the last frame but goes back to frame one. Movie stops normaly when played on iMac but makes trouble when placed in the iBooks Author. That's not eve problem of looping (repeat none). Help, this makes me mad.

laura4life
You have fragments (leftovers) beyond the end of the Timeline content that you intended.
I am going from an Elements Windows workspace, so please translate into Mac accordingly.
Expand your Timeline content to the maximum with the Zoom Out Zoom In slider above the Timeline.
Press the End key of the computer keyboard. That should take the Timeline Indicator to the fragments which must be deleted.
Explore all the tracks in that area.
Repeat the End key press until the Timeline Indicator stops at the end of the intended Timeline and not some 3 hours afterward.
What you find at "end of track" could be fragments or files that you moved out of the way of the active project and forgot were there.
The fragments typically present as thin vertical black lines scattered about the tracks.
Please let us know the outcome.
Thank you.
ATR

Similar Messages

Stopping Video at last frame in Power Point

I produced a video clip in WMV via PowerDirector 12 overlayed with a running time clock. I put that clip into Microsoft power point 2010. I wanted the video to stop on the last frame to show how much time is expended. In no of the above modes can
I get it to do that. Power Director has passed the buck as they say they don't do the looping. Can anyone help me do it either in WMV while producing or Power Point?

Hi Lottie,
You've posted your question to a forum for Microsoft Project - a project management scheduling product. It's unlikely you'll get an answer about WMV here.
You might try the Expression forums:
http://social.msdn.microsoft.com/Forums/expression/en-US/home?category=expression
Or when in doubt - ask which forums at:
http://social.msdn.microsoft.com/Forums/expression/en-US/home?forum=whatforum

After a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

Hello Gemese,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

A movie I ment to download stopped near the end of the download I want to know what I can do

A movie I ment to download stopped towards the end of the download

Hi, jannaken.
Since the computer was restored to factory, your sync preferences have been reset. I would recommend verifying that Sync Music is selected under the device preference. Below, this article will walk you through the process.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Cheers,
Jason H.

How to stop on the last image and that image remains on the screen?

hello,
how to stop on the last image and that image remains on the screen?
thanks
Yves

Two ways are;
split the clip with the razor tool at the point you want the image to freeze, r-click and select a Frame Hold option,
or
position the play-head at the end of the clip you want freezing and export a still frame. Re-import it and put it in your sequence.

Everytime i try to sync my music to my ipod, it always completely stops during the last stage. What can I do to get it to sync properly?

Everytime i try to sync my music to my ipod touch, it always completely stops during the last stage. What can I do to get it to sync properly?

Have you looked here:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
The link provides links for other Win OSs. If you are still having problems please tell us what OS and version you are running and what version of iTunes you have installed.

When I send mi presentation to a Quick Movie, the program record only the last frame

Why when I send mi presentation to a Quick Movie, the program record only the last frame, how I do to record the whole presentation of 52 frames

I mean when I try to burn a CD.

Slideshow: How can I stop on the last slide?

How can I get my slideshow to stop on the last slide? I set the slide to stop as the end action, but it goes to a black screen.
Anyone know how I can do this?

Slideshows slides are timed by default.
If you want the last slide to freeze, set it to Manual Advance in Slide properties. Then it will hold the last slide until the user hits the Next/Previous buttons (if they figure that out on their own, that is...you might want to post an instruction of some kind on the slide).

Screen now totally blank after being on and off intermittently the last few days???

Screen now totally blank after being on and off intermittently the last few days???

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
iPad2 sync is fine.
Any ideas to solve it?

This sounds like a problem you should take up with Apple Customer Support.
The other users like yourself here are not going to be able to help you with this problem.
Allan

How do I loop back from the first frame to the last frame?

Hi there,
I'm currently working on the framework for a product viewer.
I have:
a movie clip called 'viewer_mc' which contains the images take from different angles of the product. The actionscript generates a script on the last frame of this that returns it to frame 1.
a button instance called 'autoplay_btn' which plays through the movie clip from whatever the current frame is, and stops on frame 1.
a left and right button which serve to move the movie clip frame, to give the appearance that the product is rotating.
I have succeeded in getting it to:
have the movie clip play through once, return to frame 1 and stop.
have the buttons return functions when held down, that move the frame in the movie clip using nextFrame and prevFrame commands. The right button successfully loops round to frame 1 and continues functioning to give the appearance of continual rotation.
The last problem I am experiencing is getting the left button to act in the corresponding manner, going from the first frame to the last and continuing to function.
Here is my actionscript so far:
import flash.events.MouseEvent;
var lastFrame:Number = viewer_mc.totalFrames;
var thisFrame:Number = viewer_mc.currentFrame;
var backFrame:Number = viewer_mc.currentFrame-1;
1. This is the part that gets it to play through once before returning to the first frame. I think perhaps the problem I am experiencing is because of the 'viewer_mc.addFrameScript(lastFrame-1, toStart)' part i.e. although I'm holding the left button, its returning to this script and therefor getting bounced back immediately to the first frame. However, there is no flicker on the screen which you might expect if this were the case
Note - as this is a generic product viewer which I can use as a template I am using lastFrame etc. as opposed to typing the value in
function toStart (){
          viewer_mc.gotoAndStop(1);
viewer_mc.addFrameScript(lastFrame-1, toStart);
2. This is the functionality for the autoplay_btn that will play through a rotation / return the viewer to the initial (frontal) view of the product (frame 1).
autoplay_btn.addEventListener(MouseEvent.MOUSE_DOWN, autoplay);
function autoplay (ev:MouseEvent):void{
          var startFrame:Number = viewer_mc.currentFrame;
          viewer_mc.gotoAndPlay(startFrame);
3. This is the functionality of the right button, which when held, moves the movie clip to the next frame via the 'rotateRight' function based on the 'nextFrame' command. It loops back round to the first frame due to the 'viewer_mc.addFrameScript(lastFrame-1, toStart)' script generated on the last frame of the movie clip, as is desired.
right_btn.addEventListener(MouseEvent.MOUSE_DOWN, rightDown);
function rightDown(e:Event){
    stage.addEventListener(MouseEvent.MOUSE_UP,stoprightDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
    addEventListener(Event.ENTER_FRAME,rotateRight); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stoprightDown(e:Event):void {
    removeEventListener(Event.ENTER_FRAME,rotateRight); //stop running the tick function every frame now that the mouse is up
    stage.removeEventListener(MouseEvent.MOUSE_UP,stoprightDown); //remove the listener for mouse up
function rotateRight(e:Event):void {
    viewer_mc.nextFrame();
4. This is the functionality of the left button, which when held, moves the movie clip to the prev frame via the 'rotateRight' function based on the 'prevFrame' command. And this is where the problem lies, as although it works for getting the movieclip back to frame 1, it does not loop round to the last frame and continue functioning, as is wanted.
left_btn.addEventListener(MouseEvent.MOUSE_DOWN, leftDown);
function leftDown(e:Event){
    stage.addEventListener(MouseEvent.MOUSE_UP,stopleftDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
    addEventListener(Event.ENTER_FRAME,rotateLeft); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stopleftDown(e:Event):void {
    removeEventListener(Event.ENTER_FRAME,rotateLeft); //stop running the tick function every frame now that the mouse is up
    stage.removeEventListener(MouseEvent.MOUSE_UP,stopleftDown); //remove the listener for mouse up
I'd imagine it is probably my logic for this part that is really letting me down - I can do a similar function in actionscript 2, but am trying to learn actionscript 3 just to move with the times as it were, and struggling a bit. Still this is only a few days in!
function rotateLeft(e:Event):void{
          if(thisFrame==1){
                    gotoAndStop(viewer_mc.totalFrames-1);
          } else{
          viewer_mc.prevFrame();
Any help you can give me would be gratefully received. For an example of the effect I am trying to achieve with the autoplay button etc. I recommend:
http://www.fender.com/basses/precision-bass/american-standard-precision-bass

Thanks for getting back to me.
Here's the code without my comments / explanations:
import flash.events.MouseEvent;
import flash.events.Event;
var lastFrame:Number = viewer_mc.totalFrames;
var thisFrame:Number = viewer_mc.currentFrame;
var backFrame:Number = viewer_mc.currentFrame-1;
function toStart (){
          viewer_mc.gotoAndStop(1);
viewer_mc.addFrameScript(lastFrame-1, toStart);
//last image of viewer_mc = first image of viewer_mc
autoplay_btn.addEventListener(MouseEvent.MOUSE_DOWN, autoplay);
function autoplay (ev:MouseEvent):void{
          var startFrame:Number = viewer_mc.currentFrame;
          viewer_mc.gotoAndPlay(startFrame);
right_btn.addEventListener(MouseEvent.MOUSE_DOWN, rightDown);
function rightDown(e:Event){
    stage.addEventListener(MouseEvent.MOUSE_UP,stoprightDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
    addEventListener(Event.ENTER_FRAME,rotateRight); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stoprightDown(e:Event):void {
    removeEventListener(Event.ENTER_FRAME,rotateRight); //stop running the tick function every frame now that the mouse is up
    stage.removeEventListener(MouseEvent.MOUSE_UP,stoprightDown); //remove the listener for mouse up
function rotateRight(e:Event):void {
    viewer_mc.nextFrame();
left_btn.addEventListener(MouseEvent.MOUSE_DOWN, leftDown);
function leftDown(e:Event){
    stage.addEventListener(MouseEvent.MOUSE_UP,stopleftDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
    addEventListener(Event.ENTER_FRAME,rotateLeft);//while the mouse is down, run the tick function once every frame as per the project frame rate
function stopleftDown(e:Event):void {
    removeEventListener(Event.ENTER_FRAME,rotateLeft); //stop running the tick function every frame now that the mouse is up
    stage.removeEventListener(MouseEvent.MOUSE_UP,stopleftDown); //remove the listener for mouse up
function rotateLeft(e:Event):void{
          viewer_mc.prevFrame();
The definition of the rotateLeft function is where the problem lies I think - I've taken out my poor attempts at doing the logic from the previous post. If I were to write it out long-hand the statement I want to write is: 'If you get to frame 1 and function rotateLeft is called go to the end of the movie clip'.
The reason I have to use the viewer_mc.totalFrames-1 definition in the addFrameScript call is the addFrameScript function is 0 based i.e. if you want to call frame 1 of the movieclip you have to return a value of 0 in the addFrameScript (or such is my understanding of it anyway). As such, the last image in the movie clip will need to be the view obtained at 360 degree rotation, which is of course the same view as at 0 degree rotation. As a consequence, the last frame in the movie clip is superfluous for the user, but necessary for the overall effect to be achieved. And, in addition, to keep up the effect of a 360 degree view when the rotateLeft function is called it needs to skip that last frame to go to the lastFrame-1 (or totalframes-1), or in other words, the view of the image prior to completing the full 360 rotation.
the variables thisFrame and lastFrame are defined at the very top of the script. Like you said they might need to be defined or called on again elsewhere.

After effects composition - right side cut off - last frame in premiere

I have a ppro project - creative suite monthly cs6 - osx 10.9.5 mavericks (latest before yosemite upgrade)
at the end of the project - I have an after effects composition. It is fine until the last frame - where the far right 1/8 or so is being cut off of the slide. (see image below). The frame before the end? perfect. The final frame - cut off.
If I extend the ae composition one frame longer - the same issue happens (the second to the last frame is perfect, the last frame is cut off). same with making it 1 frame shorter.
I have never seen anything like it.
when I check my effects controls - I have nothing active (no opacity, no "crop" etc.) - my height/width are all exactly the same in both frames.
Any ideas?

Hi Teloscientist,
That's the End of Sequence Indicator. Expected behavior. It doesn't show on your exports, so don't worry. In Premiere Pro 2014.1, you can disable it.
Thanks,
Kevin

"previous" button to the last frame of a MC

I have a question that I hope will be super easy - I just
can't see to find it. Also, flash is not my main app but I'm trying
to pick up on some work that someone else had started. Here is the
breakdown - in the main timeline there are a series of projects
(frames labeled "projA, projB, etc). If you open up each project
movie clip (say projB) it opens up a slide carousel-like interface
(frame1=image1, frame2=image2, etc). The next button says
"onRelease go to frame 2" and so on. When we get to the last frame
in projB, the NEXT button says go to the root and play projC. This
allows the end users to just hit NEXT the whole time and work their
way through the presentation.
Where I'm a bit stuck is on the PREVIOS button frame of
projB. I would like it to go to the LAST frame of ProjA but the
best I can do is to make it go back to the begining of Proj A
on(release){
_root.gotoAndPlay("projA");
Is there a way to make it go to say, frame 4 of projA? Or
better yet, just the "last" frame of projA? I know this is probably
not the ideal way to set up the file, but i inherited the
presentation from my co-worker. Any suggestions on how to make the
PREV button work a bit better?

you might be able to accomplish this through the use of a
variable, although it will be tricky in the scenario you describe.
declare a new variable on frame one main timeline, let's say
'back':
var back:Boolean;
then on the frame label for each project you will use a
condition to see if 'back' is true - if so, then use the condition
to nav to the last frame of the project clip - something like:
if(back) {
back = false;
projA.gotoAndStop(projA._totalFrames);
this would belong on the main timeline, so in your previous
button's 'on' handler add a statement to set 'back' to true so that
the condition fires. and navigates to the last frame of the proj
clip, as in:
on(release){
_root.back = true;
_root.gotoAndPlay("projA");
repeat this procedure for all project frames and buttons
replacing the MC instances with the corresponding names.

DataLine replay the last frames when I dont write in it

Hi,
I have an App who receives bytes[] from UDP Packets, and write in a dataLine. The problem is clear, when I dont receive any packets, dataLine replay the last frames:
This is the code:
AudioFormat audioFormat = new AudioFormat(8000, 16, 1, true, false);
DataLine.Info info = new DataLine.Info(SourceDataLine.class,
                    audioFormat);
SourceDataLine dataLine = null;
dataLine = (SourceDataLine) AudioSystem
                         .getLine(info);
dataLine.open(audioFormat);
dataLine.start();
while(true)
if ( receive Sound )
          decode_G729 = gd.G729Decode(soundReceived);
          dataLine.write(decode_G729, 0, decode_G729.length);
System.out.println(dataLine.getLongFramePosition());
}This is the output of the frames:
Start receiving sound:
7680
7680
7680
7440
7600
7760
7840
8080
8160
8160
8160 Stop receiving sound in this moment:
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
*4320
4560
5040
5280
5680
5920
7120
7520
7840
8160*
8160
8160
8160
8160
8160
8160
8160
8160
8160
8160
You can see that??? In some moment, when Im not writing in the DataLine, the FramePosition get back to an earlier position, and in some cases, replay the last moment of the sounds!!
Is really annoying, and I dont know how to fix it.
Any help would be appreciated.

AntonioMG wrote:
My intention was to put a code as clear as possible, I think theres no need to be rude...If you're asking for someone to help you find a bug in your code, you don't rip out sections of your code that could contain the bug you're looking for for the sake of clarity. It's a waste of everyone's time, and frankly, makes you look like a troll.
Giving the impression of wasting my time will result in me being rude to you. Sorry for the misunderstanding...
That said, try the following code and report back the results...
AudioFormat audioFormat = new AudioFormat(8000, 16, 1, true, false);
DataLine.Info info = new DataLine.Info(SourceDataLine.class,
                    audioFormat);
SourceDataLine dataLine = null;
dataLine = (SourceDataLine) AudioSystem
                         .getLine(info);
dataLine.open(audioFormat);
dataLine.start();
while(true) {
    socket.receive(packet);
    RTPPacket rtpPacket = new RTPPacket(packet.getData() , packet.getLength());
    if ( rtpPacket.getPayloadType() == 18 && rtpPacket.getPayloadLength() == 20) {
     // Ensure the line is started
     dataLine.start();
        decode_G729 = gd.G729Decode(soundReceived);
        dataLine.write(decode_G729, 0, decode_G729.length);
    // Stop the line if it's inactive
    if (! dataLine.isActive() {
        if (dataLine.isRunning()) {
            dataLine.stop();
    System.out.println(dataLine.getLongFramePosition());
}

Movie after playing doesn't stop at the last frame.

Similar Messages

Maybe you are looking for