Movie category no longer showing up??

My AppleTv 2nd generation no longer shows MOVIES category. Never been a problem before. Is this because of an update? How do I access movies for rent from Itunes Store?

I have the same exact problem. only the Internet-Computer-Settings icons are shown.
The internet features (youtube etc.) work perfectly.
i've checked the location settings as well, seems no problem.
still not working. i could rent only one movie ever since I got my ATV2.

Similar Messages

  • Movie Artwork No Longer Shows Up

    I made MP4 copies of home movies and imported them into iTunes for Windows, then added artwork. Everything worked fine. The artwork would show up on my iPad and within iTunes without issue.
    I have no converted fully to the Apple ecosystem and have imported the same movies into iTunes. Problem is, whenever I sync movies with my iPad, the artwork that was there disappears and when I check "get info," it says artwork is not available. For a new movie that I converted into MP4, then imported into iTunes, I am having the same problem. So, it's not iTunes for Windows that caused the problem. It's evidently something wonky with iTunes for Mac.
    What's going on here? How do I remedy this?

    I have just purchased a new Imac running 10.8 mountain lion, after loading new songs into itunes I too had no screen saver working showing the art work.
    This had nothing to do with voice memos, no other items were connected so have tried this method and it works twice on both computers, the other is running leopard.
    If all your music is on the main hard drive, check in finder and your itunes folders should be in music, all I did was make a new folder and call it music 2, make sure its under music on the left hand side, drag the itunes music folder containing only the music into this. From this go to itunes in applications delete itunes into trash, restart computer then download the latest version. When all opened up you should get a home page showing get music from icloud or scan for media, press scan and let the new version find it on your computer, when finished go to screen saver settings and notice the itunes screen saver working.
    I don't know why this works either its a software fault with apple or just my luck, but I have had no problems since and looks greats on the screen.

  • My movies, audio, purchases, etc no longer shows up on my iTunes! HELP!

    i clicked to open my iTunes when all of the sudden not only did the itunes open but it started to "IMPORT" itunes rather than open to its window! i click "stop" downloading in the middle. when i reopened my iTunes icon i the only ones i see is my:
    - music
    - under PLAYLIST the only one showing is SHUFFLE everything else like purchased songs, and my folders are gone!
    - movies: i downloaded are no longer showing up on my movies folder.
    - audiobooks: the same thing i see!
    i'm afraid to connect my iPod to my laptop in fear i will lose my movies, audiotbooks , purchased and added songs, recently added songs and the like!
    what should i do? what happened? is my itunes libary corrupted?
    please help. thank you.

    i also want to add that i downloaded itunes 7 hoping i can restore the folders i lost. unfortunately it didnt work.
    is my itunes corrupt?
    is there a software like copytrans i can download that can save songs, movies and audiobooks?
    thanks in advance.

  • Itunes plays tv shows in movie category

    I recently brought a new ipod nano (3rd generation) Ive managed to download videos succesfully on to my itunes, however whenever I download a tv show onto my itunes it automatically gets saved into the movies category and no matter what I try it won't move into the tv shows category, How do i fix this? Thanx fpor your help!!!!

    Try this. On the tv show listed in the Movies Category, right click on the listed show and select Get Info. On the window that opens up, click on the Video Tab and select TV Show from the Video Kind drop down list (by default it is always set to movie). Changing the Video Kind will move your TV Show over to the TV Shows category listing.

  • IPod Touch no longer showing up under My Computer

    My iPod Touch is no longer showing in the device list under My Computer and as such can't access it to get my photos off it.
    It works in iTunes just fine, syncs fine, etc.
    If I go to Devices and Printers, it used to be listed under the Devices category as iPod, but now shows under the Unspecified category as Apple Mobile Device USB Driver, so basically a generic device.
    I have no devices with exclamation points or any other trouble signs under Device Manager.
    Help?

    Well, I am not entirely sure what exactly happened but after trying numerous times to reinstall the drivers and getting all sorts of error messages, I finally got Windows 7 to cooperate. The iPod Touch now shows up and is being detected as a digital camera under Devices, and under Computer it is showing up under Portable Devices. If I double-click on it I can view my pictures, transfer them, delete them, etc.

  • Apple TV no longer showing up in Itunes

    I went to settings on Apple TV and tested the network, which was o.k. Apple TV is connected through an ethernet connection to a Linksys router. Apple TV no longer shows up in Itunes. An aside question relating to Itunes: In my movie library, to the left of the movie name, a circle sometimes appears. Some movies have no circles. Some of the circles which appear are solid blue, some are half blue/half white. What do these circles and color codes mean? thanks

    Welcome to the  Discussion Forums
    jimbo1168 wrote:
    I went to settings on Apple TV and tested the network, which was o.k.
    How exactly did you do that
    Apple TV is connected through an ethernet connection to a Linksys router. Apple TV no longer shows up in Itunes.
    Have you tried restarting all your equipment, has anything anywhere on your set p changed.
    An aside question relating to Itunes: In my movie library, to the left of the movie name, a circle sometimes appears. Some movies have no circles. Some of the circles which appear are solid blue, some are half blue/half white. What do these circles and color codes mean? thanks
    A blue circle indicates you haven't yet watched it, a half blue circle that you have started to watch it but didn't finish it.

  • Aple tv no longer showing up in iTunes

    Anyone know why my 1st generation AppleTV's (2) are no longer showing up in itunes?  I used to be able to see them and could tell when they are syncing.  Now they no longer dowload content either.
    Thanks!

    Welcome to the  Discussion Forums
    jimbo1168 wrote:
    I went to settings on Apple TV and tested the network, which was o.k.
    How exactly did you do that
    Apple TV is connected through an ethernet connection to a Linksys router. Apple TV no longer shows up in Itunes.
    Have you tried restarting all your equipment, has anything anywhere on your set p changed.
    An aside question relating to Itunes: In my movie library, to the left of the movie name, a circle sometimes appears. Some movies have no circles. Some of the circles which appear are solid blue, some are half blue/half white. What do these circles and color codes mean? thanks
    A blue circle indicates you haven't yet watched it, a half blue circle that you have started to watch it but didn't finish it.

  • Nano no longer shows up as device in itunes

    My nano no longer shows up as a device in Itunes.  Connection is good as it still charges, but nothing when I plug it in.  Does not show up as device in windows either.

    Until you fix it, make future purchases in itunes direct.
    Are you using a different computer? Mac or Windows?
    Which iTunes version?
    Any security software potentially blocking access to AppleTV from iTunes.
    AppleTV1 as you know has 2 modes - streaming and syncing.  It has to be configured as a sync library for purchases to transfer to itunes and for you to sync to it.  Synced content appears under My Movies etc.  Streaming only content appears under My Shared Movies etc if a sharing libarry is configured.
    You cannot copy purchases back to a shared itunes library only the sync library.  Both sync and share connected AppleTVs however should appear under Devices in itunes.  Can you send a song to AppleTV from itunes using Airplay?  The fact that you can buy on AppleTV means it's connected to the internet - it does not mean that it is connected with iTunes on your LAN - the 2 things are separate.
    If you no longer have a sync library you would need to change exisitng settings which will delete current synced material but apparently (never tested so can't be sure) not non-backed up purchases.
    Under AppleTV's Settings>Computers menu, the top entry is teh sync library - if this is greyed out then either it's no longer available (eg different computer) or AppleTV and itunes are not connected.  If you select it and choose to remove it,you can re-add the AppleTV to itunes afresh - if itunes doesn't see the AppleTV requesting a pairing when you try this either there's a communication/network issue (hardware or software related) or perhaps itunes installation corruption.
    Good luck.
    AC

  • Ethernet card no longer showing in ifconfig [solved]

    Hey,
    Normally I don't have any problems with my networking, but this morning my wireless decided not to work. I haven't made made any changes in the past couple of days, so unsure what has caused it. Last Syu was on Thursday and every day including up until last night was fine.
    So spent a while trying stuff out and stressing my tiny little brain for ideas, quick version is I did this:
    netcfg: said interface didn't exist.
    ifconfig: didn't list the interface (wireless is usually eth1)
    lsmod: confirmed the module (ipw2200) was loaded
    lspci: confirmed the card was there
    After copying the output of the above commands plus the obligatory rc.conf onto usb to move to this machine (and just before pushing <submit> on a much larger post than this :-) I decided to check the mac address listed in ifconfig with what is on the sticker under my machine. Voila! My wireless has actually moved to eth0. OK, that's that solved. (Wish I checked that first though...)
    But that means that the reason that my wireless card is now eth0 instead of eth1 is because my old-skool wired ethernet card is no longer there to be numero 0. Why isn't it working? lsmod shows that the tg3 module is loading (it's an Intel card with Broadcom chipset in a Thinkpad T43) , but it no longer shows up in ifconfig. lspci is not showing it (see below), only the wireless card comes up. Does this mean the hardware is borken? What else can I do to check the card?
    $ lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Mobility Radeon X300]
    0b:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
    0b:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
    Appreciate any advice you can give.
    Cheers,
    vW
    Edited subject
    Last edited by von_Wanderlust (2009-07-28 16:10:22)

    Yeah, doesn't give me anything about the ethernet card, but does show the wireless one. No, hang on, just found it. Hmmm, didn't see it before, but I was grepping for 'net' then.
    $ dmesg | grep -i eth
    eth1: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:12:34:56:78:9a
    eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    eth1: dma_rwctrl[76180000] dma_mask[64-bit]
    OK, so it is at eth1 now, that makes sense since I put ipw2200 right at the beginning and tg3 right at the end of the MODULES array in rc.conf to avoid the system getting crossed up while trying load them too close together. Thanks B, so at least we know something is happening at boot time.
    Btw, my assumption is that ifconfig shows hardware once it is loaded correctly, is that right? But apart from the modules, what else do I need to do to get it showing up in ifconfig?

  • My ipod touch 4g just updates today on itunes and the update caused more trouble than good. My ipod will no longer show me the battery percentage in the top right hand corner and also I am not allowed to drag other applications to the bottom panel.

    My ipod touch 4g just updates today on itunes and the update caused more trouble than good for me. My ipod will no longer show me the battery percentage in the top right hand corner and I am not allowed to drag other applications to the bottom panel. Also my itunes doesn't allow "enable disk use" anymore. Can anyone help? My ipod now says that it's the 4.3.4 version

    - Unjailbroken iPod never showed % battery.  Just the icon.
    - Unjailbroken iPod Touches never had a disk mode.
    - What happens when you try to drag a wiggling app to a empty space in the bottom? Does it move and snap back?

  • IPhone no longer shows up in iTunes: can't update files, etc.

    Hi there,
    For some reason (and I don't think it's the USB connection... I've tried two) by iPhone no longer shows up in the iTunes window when I connect it to my MBP. Consequently, I can't update my Address Book, or anything like that.
    Does anyone know what I can do to correct this? I've tried restarting the phone (a 3G, by the way, running the new OS)
    Regards, Malcolm

    Malcolm Hamilton wrote:
    now I have no music in iTunes. Luckily, I'd renamed my iTunes folder, and moved it onto my desktop. I thought it would be a simple matter of replacing the new (empty) iTunes folder with my old one, but this doesn't seem to work. Can someone tell me the best was to get my 3,000-odd songs (and the folders/playlists they're in, etc., back into iTunes?
    If you move and rename the the iTunes folder you won't see any music in iTunes the next time you launch it. You can quit iTunes and rename it then put it back or leave it and launch iTunes while holding Option to choose the location of the iTunes library.
    See these articles about the iTunes library for more information:
    How to open an alternate iTunes Library file or create a new one
    iTunes for Mac: Moving your iTunes Media folder

  • After changing contact photo on iPhone, photo no longer shows up in outlook

    I had my contact photos all setup on my iphone, and syncing correctly with iTunes and showing up correctly in Outlook 2007. The photos are stored on the iPhone, and set either by selecting the photo and doing "Assign to Contact", or in Contacts, Edit, Edit (the picture) and "Choose Photo". They would show up as a thumbnail in the Outlook 2007 Business Card view, and also in the detail when you double-click a contact. This part of the process hasn't changed.
    What has changed is iOS4. Now, when I go in and change a contact's photo on the iPhone, it no longer shows up correctly in Outlook 2007. It shows a blank space when showing the Business card view, but shows the photo correctly in the detail if I double-click a contact. Even if I change it back to the photo that it was, it still won't show correctly in Outlook 2007 Business Card view.
    Contacts whose photos I haven't changed since iOS4 show correctly in both places in Outlook 2007.
    Anyone else seeing this or have a fix?

    Hi!
    I'm having the same troubles and after searching for a while i found
    the following solution:
    In short (from http://gyoo.com/blog/?p=48)
    First, some figures:
    iPhone camera resolution: 1600×1200 (72dpi)
    iPhone screen resolution: 320×480 (160dpi)
    iPhone contact picture display size: 64×64 (160dpi)
    iPhone contact picture display size on call: 320×270 (160dpi)
    Outlook import resolution: 72×96 (72dpi)
    - On your PC, resize the image contact to 320×320 (160dpi),
    knowing that 25 pixels on the top and bottom will be semi-transparent when on call.
    - On your PC, create a folder iPhone Photos\Contacts and move your contact photos inside Sync the photos into your iPhone with iTunes through the Photos tab.
    - Select the iPhone Photos folder as source.
    - Manually associated the photo to your contact on the iPhone
    (Edit ->Add Photo->Choose Existing Photo)
    - Sync back the iPhone with iTunes.
    The photos will be associated automatically into Outlook with the good resolution this time.
    Regards
    Harry

  • IMovie '11 will no longer show project or open the project file

    Upon finishing a project, I was ready to do a Share > Export Movie command, and opted first to do a restart on my computer (by first doing a File > Quit in iMovie).
    Now my project no longer shows up in the projects pane!
    While the import of the original footage still exists in the Event Library pane, the project is nowhere to be found in the Projects Library pane.
    In addition, while the project file that sits in my iMovie Projects folder is there, it will not open! 
    When I option click it to open with iMovie, iMovie launches normally (displaying no messages) but does not show the project in the projects pane! 
    What has happened here?  The iMovie Projects folder is on my internal hard drive and I have not ever moved any files around. Is there any way to get it back?
    I have tried to open my project file on a different computer that is networked in the same room, but the same happens: iMovie launches normally, however the project does not appear in the the Projects Library pane. 
    As a test, I have created a couple new projects that I have named "Test1" and "Test2" and they indeed show up normally every time I launch iMovie or do an "open with iMovie" command from the iMovie Projects folder.  But my origional project just doesn't work. Please help!
    If this is of any help: my origional project comprises of a 26 minute MOV file that I have simply imported in iMovie and have added subtitles (no transitions).  I had been working for two days on it, and there were 2 times early on when I had to force quit iMovie because I was getting the spinning ball - I was worried about whether the changes were saved, but each time they were indeed saved and I could access the project normally. (I had considered this was caused by a shortage of memory, so I did not think anything of it.) Since then and up to the moment of the problem, I had occasionally shut down or restarted my computer (by first doing a File > Quit in iMovie) with no problems up to now.  
    Looking through the forum, I have tried 1) logging in/out, 2) logging in as a visitor, 3) creating a new admin account, in addition to 4) subtracting the iMovie preferences file from the Library, but nothing has worked.
    Any help would be greatly appreciated!
    I'm running Mac OSX 10.7.5 and iMovie '11 version 9.0.8 on an iMac 27 inch, 2.8 GHz i7 with 4 GB ram. 

    Are you running Time Machine?

  • Upgraded my Living Room Apple TV to 5.2 and now it no longer shows up on my iPads as an option

    Upgraded my Living Room Apple TV to 5.2 and now it no longer shows up on my iPads as an option to play back my iTunes rented movies. Any idea why or how to get it to reappear? I did not update my bedroom Apple TV and it still appears as an option. Many thanks in advance.

    Did you check to see if AirPlay was still eneabled on ATV after the update?  Was the iPad/iPhone updated to iOS 6.1?

  • IPhone no longer shows up as a hard disk for photo transfer

    When I used to plug in my iPhone it would show up in the My Computer page as an external disk. If I clicked through the folders I could easily move pics from my phone to the computer. I had already shut off the auto open feature of the program select.
    Not sure why my iPhone no longer shows up. It shows up fine with iTunes

    Greetings,
    The iPhone won't work as an external disk, never has, by default. It will show up in iTunes, it is supposed to there, but not on your desktop.
    Are you thinking of an iPod Touch, maybe? Maybe you have a phone that was tampered with, maybe?
    There are third party apps that might do what you are talking about.
    Cheers,
    M.

Maybe you are looking for

  • Not SURE HOW TO TRANSFER PHOTOS  FROM A "MAC CD" FOR USE A PC

    I didn't expect a problem, but have run into one this weekend. Looking thru old photos, I came across a photo disk from Ritz Camera containing pix from 2006. Wanted to pass along the pix (along with other photos and documents) to a friend who has a P

  • Feature in Audition in STP?

    In Adobe Audition you can play a CD and record it in realtime as it is playing. Can you do this in Soundtrack Pro? I am not talking about a digital conversion. G5    

  • Aleo mp3 to swf converter

    Has anyone used this software? How do you insert the swf file into a Captivate project? I have Captivate 5 but when I insert the player.swf file as animation I only get the image. The playbar buttons are not active and the audio does not play.

  • Calling ABAP Web Service on the system with two application servers

    Hello all, I try to figure out, how to setup a web service in the TC WSCONFIG in the multi application server environment. Basically the requirement is that when WSClient calls my WS, it should not care about accessibility of one or another applicati

  • Tabs don't display address

    When I open Firefox 6, the tabs will keep saying 'Connecting...' with the green timing circle. Some of them the green circle will stop, but it still says connecting... Open a new tab and it will go to the web page but still says 'New Tab" not the web