Movie clip capture app?

I am wanting to build a powerpoint type presentation probably using Keynote around several shortlips from a TV series as well as several motion pictures of the same series. I've already received permission from Paramount Pictures as well as CBS Studios to use there material. Now I'm looking for an app that will allow me to capture short clips from the movies and TV series I already own on DVD. Does such an app exist?
My challenges are,
1. Which app to build the presentation with?
2. Which app to get the movies on to my iPad? (iTunes sync)
3. Which app to capture the short clips with and how to insert them into the presentation?
4. Do this entire presentation using only my iPad. (Les the DVD Movie sync part).
Thanks!!!!

In order to copy a movie from a commercial DVD to your iPad, the first thing you'd need to do is break the encryption. Therein lies the problem. Breaking that encryption is illegal in the U.S. Discussions about it here are prohibited by the terms of use of these forums.
Perhaps you can contact the rights holders and ask them for clips or unencrypted copies.
Best of luck.

Similar Messages

Import a clip captured in i Movie

Is it possible somehow import to FCP a clip captured in i Movie?
I had a problem with time code breaks (which occurred every 1-3 minutes without obvious reason) while capturing in FCP. It takes enormous time to edit all these small pieces... I tried to avoid this using i Movie for capture... but now I see, I can't use the captured file. Or can I?

Not sure if you can build a sequence to match the .dv codec that iMovie uses... you might start there.
OR - use something like QT Pro player to export your video to Quicktime DV/PAL (or NTSC) 48k/16bit.
Then drag those into a normal DV setup for yourself.
Good luck,
CaptM

Movie clips in starmovie apps

Hello. I recently restored and updated my daughter's ipod touch hoping to erase restriction code that we forgot (5th time so far and don't want the ipod to get blocked). After restoring it, the restriction code area remains the same (5th time wrong code) and all of her movie clips in imovie apps and starmovie apps disappeared. We downloaded both apps again into her ipod but they don't come with her movie clips in them. Your advise please.

If you restored from a backup made with the Restrictions passcode in place the Restrictions passcode also gets restored. You have to restore to factory settings/new iPod.
Unless she imported the clips to her computer/email them or similar they are gone.

How do I recerence Movie Clips on the Main Timeline from inside a class?

Hey everyone, this might be a stupid question but I thought
I'd ask cause it's making me nuts. I'm all of 2 days into AS3
(coming from not using Flash at all in YEARS) so feel free to
consider me ignorant. I do have plenty of application development
experience in other areas though.
I can't seem to create a class that can reference an instance
of a movie clip on my main timeline. I'd post code of what I've
tried but I've gone through so many desperate edits & wild
guesses that it was just garbled junk before I deleted it all.
Basically here's how I figured Flash could work, though maybe
it doesn't work this way at all.
I'm assuming that with AS 3 being so big on being a true
object oriented environment, I wouldn't need to mix my code and
interface together. Preferably I'd be using the Flash authoring
tools just to design my interface. Create a button... place it
somewhere... give it an instance name. Roughly the equivilant of
Apple's InterfaceBuilder for those of you that might be familiar
with Cocoa development. I can see maybe having to put a few lines
of ActionScript onto frame 1 (though really I'm hoping Flash would
have a better method of kicking off the application at this point
that using code tied to frames) to load my classes & such, but
after that I'd like all of my code to be held in external class
files.
So maybe I've got:
Interface.fla - My interface
Button_1
Button_2
TextField_1
Main.as - My main controller class using to handle all of my
applications behavior
SomeClass.as - Some helper Class
SomeOtherClass.as - Some helper Class
Main.as would have instructions in its initialization method
to go ahead & attach events to buttons & initialize
anything else that needs to happen when the application starts.
From there on it would all be objects communicating back &
forth. Button_1 would get clicked with would fire
Main.someMethod(). Main.someMethod() would then do it's thing and
set the value of TextField_1. All very clean & code is very
separated from interface.
Unfortunately I can't for the life of me figure out how AS3
classes reference each other like that. There doesn't seem to be
any kind of a global 'root' or '_root' I can use to locate any
movie clips on the stage. I've searched the help & the web for
any kind of simple tutorial but to no avail. My job has tasked me
with building a flash app for a project but I'd really rather not
have a tone of ActionScript just shoved into frame 1. That just
seems... ugh! (::shudder::)
Can someone maybe point me in the right direction here? I'm
really willing to do my homework but I can't seem to locate the
info I need to get started. Also, is there an ActionScript IRC
channel or something maybe?
Thanks,
Cliff

I worked with the problem last night and the solution I
started coming to involved creating my own custom document class
based off which extends MovieClip. My thought is that way I have
access to the initialization routine of the timeline itself and
that all of the elements on the main timeline should be
"properties" of my custom class.
Is this correct? Is there a down side to doing this & if
so what is it & why?
Also, just for my reference, the last time I did anything
with ActionScript I think I was using '_root' to target the main
timeline. WHat are the global variable names in AS 3? Is it just
'root' & 'stage' or 'Root' & 'Stage' or what?

Is there a way to edit a movie clip from the horizontal format to a vertical format?

Is there a way to edit a movie clip in iphoto that I may change the horizontal format to a verticle format?

You need to use a video editor like iMovie or QuicktimePro. OR an app like this:
https://www.macupdate.com/app/mac/39994/video-rotate

How do I separate short movie clips loaded from my digital camera to iPhoto 11 at the same time pics are downloaded and how do I get those video clips to a dvd that will play on a dvd player

When loading pics to iphoto 11 from my camera, occassionaly it will include some video clips with the description of Movxxxx. I wonder if someone could direct me to some straight forward instructions as to how to transfer these video (movie) clips, which now exist in iphoto, to a dvd that will play on a dvd player as one might expect to see a video play, including the audio that was captured at the time of filming.
Thanks in advance for any assistance you can offer this novice.

You need to open iMovie and it will have a event library called iPhoto Videos, click on that and the videos will load in the window next to it, then you make a new project in iMovie. Then open iDVD and make a new project then import the movies to the program then burn to a DVD..

Button not working in Movie Clip

I'm building a small 'table builder' app for a client. This
is my first major project in flash and I've encountered something I
cannot figure out for the life of me.
In the .fla below there's a movie clip 'scroller' it has
buttons in it which load .png's to the main stage. Some of the
buttons work, some don't.... I can't figure out why. Even when I
duplicate a button sometimes it doesn't work.??? If I take a button
that's not working in the movie clip and cut/paste onto the main
timeline it ALWAYS works. I've been pulling my hair out over this
for the last two days . I have even started the whole project from
scratch just to try and find out where I went wrong... but to no
avail..... Any help would be GREATLY appreciated. I'm stuck on a
hump and I need some help to get off of it.
Here's a link to my file. I've stripped away all the styling
elements so it should be pretty clean cut when you see it. Thanks
for any help or guidance!
http://www.buddyscampfire.com/tableBuilder.zip

A few errors: Scene 1 frame 1 Actions layer. You are
referring to buttons inside of the scroller, and you don't have
too. They aren't doing anything. All you need on that frame is:
function startLoading(whichImage) {
loadMovie(whichImage, "imageLoader");
_root.onEnterFrame = function() {
infoLoaded = imageLoader.getBytesLoaded();
infoTotal = imageLoader.getBytesTotal();
percentage = Math.floor(infoLoaded/infoTotal*100);
infoField.text = percentage+"%";
if (percentage>=100) {
delete this.onEnterFrame;
infoField._visible = false;
Then on the Scroller you have that function again. Remove it
from the scroller, as it does nothing there. Inside of the scroller
all you need is code to attach png files from pressing the buttons.
Make sure each button has a unique instance name, which isn't the
case right now. You have like three buttons called imgbtn1. Fix
that.

HT4623 I have an iPad but can't download movie clips when received in either email or iPhoto. What do I have to do?

I have a new Ipad but cant download movie clips when received on eihter email or from Iphoto. My friend sent me a small holiday movie clip taken on Iphoto but I cant download it. What do I have to do?

The Settings > General > Software Update option only appears when you have iOS 5+ installed, as your tagline says that you have iOS 4 then you can only update via your computer's iTunes, as described half-way down the page that you posted from.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
You can only update a device to the highest iOS version that it supports, which for a first gen iPad is is iOS 5.1.1, and for other iPads is iOS 6.1.3

Rollover buttons that play a movie clip.

Hello,
   I am new to Flash and I am trying to accomplish a simulation such as this example, http://www.its-about-time.com/investinesart/coalplantvirtualtour.swf. I have all of my movie clips done, but how do I tell a rollover button to play a specific movie clip? I also want to have all the movie clips to play simultaneously via a rollover button as shown in the example. I've attached a captured image of my timeline, if that helps. I've tried everything so far, but nothing is working! What is the simplest way of doing this?
I have this inside one of the movie clips (mc_2) in a seperate layer under - (actions)
RO_btn.onRollover = function(){
mc_2.play();
On the main timeline I have an actions layer with this:
stop();
Thinking that this may stop all of my movie clips but it doesn't.
Should I make an actions layer in each movie clip with this syntax huh? stop();?
I'm frustrated!!
Thanks, if you can help!
MG

Hi,
I have made something that you are looking for.
It will be of help to you.
basically you will have to create a few movie clips namely:
2 buttons: (name them a_btn, b_btn, c_btn, d_btn, e_btn)
3 movie clips (I am taking example image1_mc, image2_mc, image3_mc)
in each of these movieclips.place 2 frames and on second frame put your movieclip(one in one).on both the frames put stop()
now click on a_btn and write this script
on (rollOver) {
_root.image1_mc.gotoAndPlay(2);
_root.image2_mc.gotoAndPlay(2);
_root.image3_mc.gotoAndPlay(2);
on (rollOut) {
    _root.image1_mc.gotoAndPlay(1);
    _root.image2_mc.gotoAndPlay(1);
    _root.image3_mc.gotoAndPlay(1);
with this all 3 animations will work simultaneously. if you need to run any one of the movieclips at a time the you can address that mc in particular
.Say if you want only 1 mc to move at a time then put this on btn 2
on (rollOver) {
_root.image1_mc.gotoAndPlay(2);
on (rollOut) {
    _root.image1_mc.gotoAndPlay(1);
.Dont forget to give proper instance names to movieclips.(they are in properties panel.)
Cheers!

Can't drag and drop or import movie clips or ver. 8 projects into iMovie 9

Hello:
I just installed Leopard (OS X) with iLife and iWork (although I didn't actually install iWork). I can't drag and drop .mov or .dv files into a project. If I "File-->Import-->Movies", all the types I want to import (.mov & .dv) are grayed-out. I created and saved a project with the older version of iMovie (8) and then tried to import it into iMovie 9. The result is a message in the clips panel that says "No matching video. Choose a different options from the Show pop-up menu at the lower left corner." So far, everything I wanted to do is bust. Can somebody help?
Thanks.
Etude.

annadex wrote:
I have tuns of .mp4 clips, converted them to .mov clips... .
How?
easy way:
• double-click mp4 to open it in QuicktimePlayer.app
(does it play the video?)
• File/Export/choose 720p (if optional, if not 480p)
• import THAT into iMovie using iMovies import routine, proceed …

Sync movie clips loaded by swfloader

hi guys,
i have 5 separate movie clips (swf) represent 5 flower petals,
each of them is showing up from center,
i load them in flex app by 5 separate mx:SWFLoader tags.
the problem is they should sync with each other to open up the flower,
but due to being loaded from network, they don't start at the same time.
please help me, how to sync these flower petals?

according to http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/mx/controls/SWFLoader.h tml
it doesn't seem like SWFLoader has a method called "rewind()" or "gotoAndPlay(...)"?

Combining Movie Clips in iPhoto

I currently use iPhoto 08 to download all of my photos and movie clips from my camera. Problem is, if I have, say 20 clips of one event on my camera, and want to combine into one large clip, i currently have to open all 20 clips, go to the second clip, "select all", hit "copy", then go to the first clip, "paste", then repeat 18x - - its very time consuming and easy to accidentally miss a clip or paste it in twice.....
Is there any easier / less time consuming way in iPhoto or another app to easily combine clips into one long clip?

You can combine movie files with Quicktime Pro.
OT

Movie clips won't play - OSStatus error -54

I am organizing all of my movie clips, some of which date back a few years. Since the last time I did this, something has happened and they will not play. I get the following error message: OSStatus error -54 Does anyone know of a solution?

You have the names of these files in iPhoto, right?
Download Find Any File
http://apps.tempel.org/FindAnyFile/
It's a search app that looks in places where Spotlight simply doesn't look. See if it can find them.
Cause? Updating the system won't do this, but there are a million ways things can go wrong. I wouldn't worry about Apple cutting iPhoto. The current version will run on 10.10 for the foreseeable future - that's at least another year. Even when the next OS comes out, it may run on that too. If it doesn't, well releasing the new Photos.app and upgrading the OS will not turn iPhoto off or stop it working.

Is there a way to restore a movie clip after you have closed the swf

Can you restore the state of a movie clip after you have closed it?

Could you explain more about what you mean by "assign component parameters" because I dont understand. Is this something I would do before it closed? Maybe I failed to explain clearly. i really need some help on this because i have no idea where to start. I have created an app, but I want a user to be able to reopen the app after close and pick up where they left off, or be able to change one thing and not have to start from the begining. I have searched around and cant find information on what i need so Im starting to wonder if that is possible using as3?

Flex and a flash movie clip

Hi All,
I'm looking for some information on how to take an embedded
flash movie clip and control it through Flex. I want to be able to
manually move through the movie clip, select frames to display etc.
Any information pointing me in the right direction would be
greatly appreciated.
Thanks in advance

For Flash SWF's:
Inside your componet/app def:
private var movie_clip:MovieClip;
private var myLoader:SWFLoader = new SWFLoader();
onInit() {
myLoader.addEventListener(Event.INIT,loadHandler);
myLoader.trustContent = true;
myLoader.load("../assets/my.swf");
this.addChildAt(myLoader,0);
private function loadHandler(e:Event):void{
movie_clip= e.target.content;
movie_clip.gotoAndPlay(2);
movie_clip.some_custom_as3_method();
For Flex SWF's here is an example:
import mx.events.FlexEvent;
import mx.managers.SystemManager;
import mx.core.Application;
// * gets rid of type checking so we can leave strict enabled
[Bindable]public var _appLoaded:*;
private function
onCurrentApplicationComplete(oEvent:Event):void
_appLoaded = Application(oEvent.target.application);
private function onCompleteAppLoader(oEvent:Event):void
var smAppLoaded:SystemManager =
SystemManager(oEvent.target.content); //get a ref to the loaded app
//listen for the application.complete event
smAppLoaded.addEventListener(FlexEvent.APPLICATION_COMPLETE,
onCurrentApplicationComplete);
// call a custom public method in your application mxml file:
public function setPlaylist(id:int):void {
if(_appLoaded) {
_appLoaded.change_playlist(id);
]]>
</mx:Script>
 <mx:SWFLoader id="player" x="0" y="0"
source="@Embed('../assets/Player.swf')"
complete="onCompleteAppLoader(event);" trustContent="true"/>

Movie clip capture app?

Similar Messages

Maybe you are looking for