Movie clip shows no time amount, but properties show the clip is 1.36GB

Hi all,
I have a weird problem. I set up my Canon HV20 with iMovie 6HD to capture a time lapse of butterflies comming out of their cocoon. I had it set to capture 1 frame every 90 frames. I started it at 10:55 pm last nite and woke up 5:25am this morning. Guess what! All four of them came out! I thought "GREAT", let me see what it caught. There are three clips;
Clip 01 - time- 2:00:13, 1.37GB
Clip 02 - time - 0:00:00, 1.36GB
Clip 03 - time - 26:04, 284MB
The properties show that clips 1 and 2 started capture at 10:55 p.m. and clip 3 started capture at 1:55 am. I could have swore that when the clips were in the clips pane, there was a time amount on clip 2. After i put it in the time line it went to all "0".
What could have caused this? When I opened the package I see that clips 1 and 2 show the first frame of the clip, but clip 2 only shows the quicktime logo. It doesn't play when I try to play in Qt. Is there a time limit per clip? I thought it would just record as 1 big clip.
Thanks for you help

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and  use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Similar Messages

  • HT4623 Hi everyone, I updated my iphone 3gs to ios6. But, when it come to the activation screen, It showed up could not activate iphone because the activation server is temporarily unavailable. I tried to restore many times already but it still the same.

    Hi everyone, I updated my iphone 3gs to ios6. But, when it come to the activation screen, It showed up could not activate iphone because the activation server is temporarily unavailable. I tried to restore many times already but it still the same. Help me please! T-T

    Please see the  More Like This  section on the right.

  • It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.

    # Question
    It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.
    Also in the '''Properties''' window of Windows Explorer I '''no longer have the Details tab''', so I can't update my mp3 files with Artist, Album, Genre, etc. But the details tab does show up when I access it thru Windows Explorer.
    I ran the AVG rescue disc an no viruses found. Now on '''FF3.6.15''' '''RealPlayer''' shows when I right click but then '''immediately disappears and an icon appears in the System Tray''', but as soon '''as I hover my mouse over it it disappears'''.
    Does anyone have any ideas or suggestions?
    How can I get this fixed? I have time-sensitive mp3s that I won't have access to anymore if I don't get this resolved in a hurry. (no pressure on you, I'm the one that's stressed about this) Can you help? Thanks so much for responding to this '''inquiry.''''''bold text'''

    See:
    *https://support.mozilla.com/kb/Downloads+window
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history" > "Remember download history"

  • Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?

    Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?

    Ahhh, now I see the problem, Grasshopper.  Problem is, we are all Grasshoppers, here.
    Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
    If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
    No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline.  And, of course, when they were "track 1" and "track 2", you could.
    An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor.  Click the "reveal button" for Compositing: Opacity (bottom, right).  Once open, there is a "fade handle" to the right top.  Drag it left for however much fade you wish.  (there is one on the left as well, but you were only talking about a fade-out.)
    A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio.  Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

  • I have downloaded several times now,but i get the same error message 'corrupt file ' how do i fix this?

    i have downloaded and uninstalled firefox several times now,but i get the same error message 'corrupt file' How do i fix this and i also go to the home page to download as well as others,i have also tried downloading to my laptop the same amount of times and i get the same error message :( very unhappy

    Set Windows Defender off and try download again from here:
    http://www.mozilla.org/en-US/firefox/all.html
    If this does not help see here:
    [https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files Unable to download or save files]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • HT4901 Suddenly I can no longer see any entries I've made in my calendar on my iphone 5. Everything still shows on my ipad but not on the phone. I LIVE by this calendar. Help!

    Suddenly I can no longer see any entries I've made in my calendar on my iphone 5. Everything still shows on my ipad but not on the phone. I LIVE by this calendar. Help!

    Hi Tammy56,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999?viewlocale=en_US
    Cheers,
    - Judy

  • Device Show in My Computer But Not Show in itunes

    My iPod Shuffle Disconnect During The Restore Process And Now Device Show in My Computer But Not Show in itunes.Please Help Me.to Solve This problem>

    Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.

  • I would like to move 2 users to creative cloud, but maintain all the other users (myself included) on CS5. Can I still get the reduced monthly rate? What serial number should I use?

    I would like to move 2 users to creative cloud, but maintain all the other users (myself included) on CS5. Can I still get the reduced monthly rate? What serial number should I use?

    Hi Thomasjewell,
    Yes you can avail the discounted prices even you are upgrading the product just for two users. You can use the serial number for your Creative Suite 5 product.
    You can follow the link: https://creative.adobe.com/plans in order to purchase Creative Cloud for Teams product.
    Let me know if it works or not.
    Thanks,
    Ratandeep Arora

  • I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

    I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

    what is your question/issue here? did the folder have any content in it to begin with? screen shots of what you may be seeing?
    if english isn't your native language, write it in what you are most comfortable speaking in to describe your issue.

  • The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating!

    The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating! Where can I find these two movies to watch? It asked me once it was downloaded if I wanted to watch it but I wasn't ready to and now can't find where to play these again.

    When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised  filesytem structure at the start of the Sync.
    The timeout failure could be due to
    Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
    Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
    Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
    Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
    Have a nice day!

  • I bought Welcome to New York and it shows up like that, but it plays the song Out of the Woods. What do I do?

    I bought Welcome to New York and it shows up like that, but it plays the song Out of the Woods. What do I do?

    Hi calmbl, 
    Thanks for visiting Apple Support Communities. 
    It sounds like you purchased Welcome to New York from the iTunes Store, but ended up with a different song. 
    I recommend reporting the issue with your purchase using the steps in this link:
    Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store - Apple Support
    Best Regards,
    Jeremy

  • When I nudge clips in Premiere CC they will "run over" other clips, how do I change this behavior so the clip will stop when it hits another clip?

    When I nudge clips in Premiere CC they will "run over" other clips, how do I change this behavior so the clip will stop when it hits another clip?

    Not sure what behavior you are exactly looking for, to move the clip and have it stop and the next clip in the direction of travel, drag the clip with the mouse with Snapping turned on in the timeline.
    MtD

  • HT4628 my powerbook g4 os x 10.5.8 leopard is showing-Connection time out while connecting to the wifi.however it showing all available wifi connections around but not connecting it..however ethernet is working

    Problem while connecting with Wi-Fi,
    When i am connecting my powerbook g4 leopard  to any Wi-fi connection it showing -Connection time out, however Ethernet is working .I have updated all softwares but still same problem.

    It's possible that either the internal AirPort Extreme card or the antenna is faulty or has failed.
    One last thing to try before going with another Wi-Fi solutions is to the following:
    Try the following, in order, until (hopefully) resolved:
    1a. Delete Preferred Network(s)
    System Preferences > Network > AirPort > Advanced > AirPort tab
    Under "Preferred Networks," delete the network(s) you regularly use from the list.
    1b. Delete AirPort Keychain Entries
    Launch the "Keychain Access" application located in Applications/Utilties.
    Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    1c. Add Preferred Network(s)
    System Preferences > Network > AirPort > Advanced > AirPort tab
    Add the preferred network(s) using the "+" button.
    Restart or log out then back in.
    2. Move System Configuration Files
    (Note: You will have to reestablish your network connections settings.)
    Go to /Library/Preferences
    Move the SystemConfiguration folder to the desktop.
    Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)
    3. Run the Disk Utility to repair Disk Permissions.
    Restart or log out then back in.
    4. Turn off the Mac OS X Firewall
    System Preferences > Sharing > Firewall
    Click the "Stop" button.
    5. Create a New User Account
    System Preferences > Accounts
    Click "+" to add a new account
    Log off, then log back on with the new user account.
    Try connecting with the AirPort.
    If none of these help resolve the issue, you may want to consider getting a USB wireless adapter to replace both the internal card and antenna. One such vendor of these adapters is Other World Computing (OWC).

  • The stills in my movie project do not respond when I try to edit their "duration" I change it  the clip inspector and click done, but when I exit clip inspector , it reverts back to what it was prior to my trying to change it?

    The stills in my i movie project will not allow me to edit the duration time. I change it in the clip inspector, but when I click done, it just reverts back to what it was prior to my attempt to change it?

    Hi There,
    I tried your workflow and some how I am not able to see your issue.
    - Will it be possible for you to share your project(where-in you always see this issue) with us. You can upload your project and send the link to maanand (at the rate of ) adobe (dot) com.
    - If sharing of project isn' t possible then please share the project details such as no of slides, objects etc.
    -Manish
    blogs.adobe.com/captivate

  • IPhoto library shows 500mb of data, but finder shows 2.2G of data

    Hi all,
    I'm not a newbie and I read a lot of threads already, this is something really new.
    iPhoto says that my library has xxx number of files totalling up to 500mb of photo's. But if I use finder and look at the properties of the iPhoto library folder, it shows that the folder is 2,2Gig large. Upon inspection, I found photo's that should've been deleted a long time ago and worse is, they don't show up on iPhoto!!! So now I can't remove these photo's and I dunno what to do.
    I can't burn a back up and start from scratch, because when I want to burn with iPhoto, it also burns these images on the DVD.

    Tensai,
    the fastest way would be to highlight library in the source column
    share> export. They are exported in one lump sum. Kind of messy if you ask me. I tried it once and was shocked...ha
    I also have no idea how that lump sum of images will import back into iPhoto either. They will probably be imported as one large roll....messy messy!
    Let me tell you what i do in case you want to do this in the future.
    When iPhoto 5 first came out I really think it was programmed to import the smaller 30 sec video clips that cameras were taking at the time. Since then, digital cameras, at least my Canon S2 can take clips as large as your memory card can hold. The first time I tried to download my images and movie clips with my new camera, iPhoto stalled at the movie clips. I wasn't going to take any chances messing up my iPhoto Library so I started using Image Capture to download all my images and Movie clips. I actually like doing it this way a lot better. My movie clips are downloaded into my Movies folder where I then put them in a dated folder.
    My photos are downloaded into my Pictures folder, where I then put them in a dated folder. I import the dated folder into iPhoto. I also keep all dated folders from photo downloads in the Pictures folder till I get enough Movie folders and Photo folders to fill a DVD. I burn them and then delete them from the hard drive.
    This way I have the photos in iPhoto and I also have just the photos backed up to DVD in nice dated folders.
    The Movies I keep on the hard drive in their dated folders until I use all the clips for my iMovie projects for the Year. I then make sure they are all burned to DVD, then I delete those from my hard drive.
    Using Image Capture to download images and video clips:
    Open up Image Capture which is found in the Applications folder.
    When it is opened, go to Image Capture/Preferences
    Under the General button choose
    Camera: When a camera is connected, open Image Capture.
    The next time you connect your camera Image Capture will open.
    In the window that opens you will see an Options button. Click on that button to set your options.
    To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
    iPhoto: How to Change the "Open Automatically" Preference
    If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

Maybe you are looking for