Movie conversion issue?

I Use Isquint to change wav files to mpeg4. I seem to have issues at times with the video quality after the conversion. They play fine via wav file but once converted they seem to distort at times. I this a Isquint issue or an id10t issue?
Thanks..

Its more than likely Isquint becuase i think if it was a id10t issue more people whould know about it

Similar Messages

IN MB51 Report price showing less at the time of Mov.221 issue for project.

Hi,
SAP Experts,
I have one issue.
In Mb51 Report i wil get less value for xyz material how?
Case: 1.Material code - 610000027.
           2.Moving Vag price - 59322 Rs
           3.Total Value           - 59322 Rs
           4.Stock                    - 1Qty.
           5.Priovus price        - 274909.23 Last price changed 02.07.2009.
           6.PO.                - 45000253.
           7.Doc.No          - 5902801452.
           8.Posting date - 04.01.2010
           9.Mov-221 issue to project.
But In Mb51 Report i wil get MATERIAL VALUE = 28832 Rs. How?
Pls Help Out...

Hi,
SAP Experts,
I have one issue.
In Mb51 Report i wil get less value for 610000027 material how?
Case: 1.Material code - 610000027.
           2.Moving Vag price - 59322 Rs
           3.Total Value           - 59322 Rs
           4.Stock                    - 1Qty.
           5.Priovus price        - 274909.23 Last price changed 02.07.2009.
           6.PO.                - 45000253.
           7.Doc.No          - 5902801452.
           8.Posting date - 04.01.2010
           9.Mov-221 issue to project.
But In Mb51 Report i wil get MATERIAL VALUE = 28832 Rs. How?
Pls Help Out...
Regards
Mahendra

Conversion issue in encoding in PI

Hi,
I am having a problem in conversion issue for encoding. Let's have a detailed look into the scenario first.
Scenario: SNC->PI (through Proxy)->MQ (through Receiver JMS adapter)->SeeBeyond (It's a middleware system).
Here from SNC, data are coming into PI as in UTF-8 encoding, whereas all the systems shown in the above flow are of ISO 8859_1 format. Hence UTF-8 needs to be converted into ISO 8859_1. PI does this conversion in Receiver JMS adapter. CCSID has been set to 00819 which is for ISO 8859_1 encoding. But the beginning of the xml, it remains still UTF-8, like below:-
<?xml version="1.0" encoding="utf-8" ?>
Whereas the content of the xml has already been converted into ISO 8859_1 by Receiver JMS adapter. Now let's see the problem now.
Problem: After the data been passed in SeeBeyond, the mapping fails in SeeBeyond, since SeeBeyond tries to look at the XML tag from the beginning and it found it's in UTF-8 as per he tag above. Then it tries to map it in UTF-8 format whereas the content is in ISO 8859_1, so mapping fails in SeeBeyond. Please note, here allthe systems except SeeBeyond are just bypassing the data, no mapping been introduced in anywhere in the systems except SeeBeyond.
Workaround: Is there any other chance where we can change the tag header from UTF-8 to ISO 8859_1 in Receiver JMS adapter itself in PI like this:-
<?xml version="1.0" encoding="iso 8859_1" ?>
This might resolve our problem I think. Any suggestions would be appreciated.
Thanks and Regards
Soumya

Hi Stefan,
Thanks for your reply. I have gone through the link you have specified. Ya, that's the other way to resolve that issue in that case. But here we have asked the receiver system (SeeBeyond) to change the encoding part in their mapping. Because changing the coding part in SeeBeyond is less time consuming than adding a new Bean in JMS adapter. Our problem got resolved by changing the mapping in Receiver end. Thanks anyway for your valuable reply.
Thanks
Soumya

Umlaut Conversion issue in Sender communication channel SAP PI

Hi Gurus,
We are facing issue while conversion.
umlaut Conversion issue in Sender communication channel that is reason channel not able to pic the file from the path.
Sender CC error:
Value of incoming field is too large. Segment:'IMD', Field:'7008', MaxLength:'35', value:'Plssvvkbecher LÃ¼bzer 0,4 (1280Stk p' DESCRIPTION: The length of the field value is too big !
Actually field contains 35 Chars only the value is : 'Plssvvkbecher Lübzer 0,4 (1280Stk p'
We tried with “ISO-8859-1” if the field value is less than 35 characters it is able to converting.
Please help me out from this issue.
Thank you.
Regards,
Jittu.

Hi Jittu,
Have you tried using the codepageconversion bean in the modules under the sender? It would be like:
AF_Modules/TextCodepageConversionBean with a parameter of Conversion.charset and a value of utf-8.
Regards,
Ryan Crosby

Language conversion issue in PI7.1

Hi,
My sceanrio is file to Idoc. Am facing language conversion issues.
For example one of the field in the source file is having the value "Différence sur net". And in the IDOC field the value is appearing as "DiffÃ©rence sur net".
With the same data I have done file to file scenario with and without content conversion and the output is coming correctly as "Différence sur net".
I have enabled Unicode check box in RFC destination also in XI server. But still its coming "DiffÃ©rence sur net" . Please advice how can I get the target field value same as that of the source field vale.
Can anyone help me to sort out this issue?
Thanks.
Dinesh

Hi,
In Channel try with using the File type: text and encoding : UTF-8.
I think this will solve your issue.
Thank you,
Siva

Artifacts in Using Save As for AVI to MOV Conversion?

When I SAVE AS a compressed avi file to mov, I am seeing artifacts (they look like interlacing errors) in the final mov file, vs the same frames in the .avi file. Can I avoid this somehow? The avi file was compressed with the BlackMagic Intensity code (I think it's motion jpg too).
The file sizes are the same.
Bummer, I bought Quicktime Pro just for this. Any help appreciated.
Thanks
w

Can anyone here tell me why two duplicate laptops treat the avi-to-mov conversion so differently and why I must export at 480p?
As to QT playback, either the codec component configuration is different on each system or the the AVI file contains a legacy video codec that is turned on for system "A" but left off for system "B" but which is included in the Perian bundle installed on system "B." With reguard to the forced conversion rather than a simple "Save As..." action, please confirm the video codec name given in the "Inspector" window for each system. I suspect that either the video codec is different on each system or that the Perian version of the same codec with a different name may be forcing the "Export" conversion.

J'essaye de sauvegarder des séquences video .mov ( 5G) issues de imovie sur un disque dur ou clef USB, à chaque essais j'ai un message d'erreur (Code erreur 0)??

J'essaye de sauvegarder des séquences video .mov ( 5G) issues de imovie sur un disque dur ou clef USB, à chaque essais j'ai un message d'erreur (Code erreur 0)??

Rebonjour mcbuffy,
Je suis désolé mais je me suis positionné sur la premiére réponse (voir copie si dessous) et la seule possibilité qu'il offre c'est Like(0) j'avais traduit par j'aime la réponse je l'ai donc cochée ou Reply (répondre) mais pas de "This solved my question"
Idem d'ailleur sur le dernier message! J'ai bien vu que dans la liste des questions certaines sont cochées.
Je crois qu'il va falloir que je retourne à l'école.
Re: J'essaye de sauvegarder des séquences video .mov ( 5G) issues de imovie sur un disque dur ou clef USB, à chaque essais j'ai un message d'erreur (Code erreur 0)??
4 avr. 2012 11:53 (in response to JEDPAT)
Bonjour,
- Il n'y a pas de problèmes si vous la sauvegarder sur le disque dur du Mac ?
- En quel type est formaté la clé USB ou le disque dur ?
Si c'est fait à la base pour Windows, en Fat32 (MS-DOS), la copie est limitée à des fichiers de 4 Go sur ces disques donc c'est peut-être ça le problème.
Il faudrait soit couper la vidéo en deux ou reformater le disque et dans ce cas, en HFS+, si vous utilisez uniquement ces disques dans un environnement Mac. Pas de problèmes de tailles de fichiers et 100% compatible avec OS X.
Si vous les utilisez sur Windows aussi et vous voulez passer cette limitation de taille, il faudra reformater en choissisant le format ExFAT mais peut être compatible à 100% avec les fonctions de votre Mac.
Attention avant de reformater bien sûr car ça efface toutes les données présentes sur le disque ou la clé USB.
Je vous conseille de lire la première réponse de ce sujet pour en savoir plus sur les compatibilités et les formats de disques :
http://www.commentcamarche.net/forum/affich-23084805-disque-dur-et-mac#6
Liked (1)
Reply

Slow Movie Conversion 5th Gen I-POD

Up to now, the movie conversion rate on my I-POD was rather quick. 3-4 minutes for a 25 meg Quicktime movie approximately. Now it takes a better part of a day to convert one, I get so disgusted I usually stop it before it gets halfway done. My music conversions are still as quick as ever (15-20 secs per song). Any ideas? This happened it seemed overnite. I have about 6 meg of music/movies on my 30meg pod. Thanks for any advice.

My view of this is that the conversion takes place on the computer, before it is sync'd to the iPod. It may be a problem on your PC. How much disc space do you have on your computer? If you are low, or there are a number of other programs running at the time, it would affect the processor coverting the movie.

Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
Please help me in following aspects.
1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
3) We have verified in both BI side(currency tables) and even ECC side.
Please help me in understanding this issue and let me know if you need more information on this.
Its an production issue and appreciated your immediate inputs.
Thanks
Kiran

Hi Arun,
The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
Kind Regards,
John Harris
Senior Support Engineer, SAP Active Global Support

In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?

FCPx answer: At least the answer that worked for me...
I had the same problem, as I believe many others had.
In my case the problem was with one of OSX Mavericks' new features: APP NAP.
It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
I just disabled App Napp on FCPx and now it works, again, like a charm.
This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
I hope this helps,
Mariano

Oracle Database : Date conversion issue between timezones

Hi All,
We are trying to convert date from Eurpoer/Amsterdam timezone to Australia/Sydnet timezone and extracting time out of it.
We are facing issue related to incorrect timing after conversion.
Please find below issue details,
Environment
Database: Oracle 10.2.0.4
Machine: Linux RHEL 4
Location: Amsterdam, Netherlands
Issue: After converting date from Eurpoer/Amsterdam timezone to Australia/Sydnet timezone
SELECT TO_CHAR (FROM_TZ (TO_TIMESTAMP ('201110201416', 'YYYYMMDDHH24MI'),
DBTIMEZONE
) AT TIME ZONE 'Australia/Sydney', 'HH24:MI')
FROM DUAL
Output of above SQL is 22:16.
Expected output is 23:16
Database Timezone (DBTIMEZONE) is set to +02:00 (i.e. GMT + 2) (Europe/Amsterdam)
If we convert date to Australia/Tasmania timezone then we get expected output i.e. 23:16.
Question: Expected time for Australia/sydney is 23:16, but why Oracle database provides 22:16 as output.
Please note that, Sydney and Tasmania comes under same timezone. Still we get different output for both the timezone.
Oracle database considers GMT + 10 for Australia/sydney and GMT + 11 for Australia/Tasmania.
If we want to use Australia/sydney then how should we get correct sydney time?
Regards
Shailendra

I made a test and it showed when I omit TO_CHAR, both queries have the same result 11:15 PM. So it's TO_CHAR which is the 'culprit'. Since this is a globalization issue, you may repeat your question in this forum:
Globalization Support
(So one of the moderators moves the thread to this forum).
Werner
By the way my local timezone is Europe/Berlin, there should be no difference to Amsterdam.

Quicktime Conversion Issues!

I am using my new MacBook Pro 2.33 to edit a 2 minute piece that I want to upload to the web. Ive used Quicktime conversion in the past to upload several other videos to my website. For some reason, everytime I try to export my finished project to Quicktime Conversion, it says: FILE ERROR: UNKNOWN FILE!
What is this all about? How can it be an unknown file? The project is still sitting on the timeline! Just out of curiousity I selected Send to Compressor and it sent it with no problem. I also tried Export> Quicktime Movie and that worked with no problem but I am havng issues with Quicktime Conversions.
Any suggestions?

Which format were you choosing? If it was the MPEG-2 option, chances are you're running QT 7 and no longer have the MPEG-2 Export Component installed on your system.
If that's the case, use Compressor for MPEG-2 and AC3 encoding ... that's what Apple is trying to force us to do by dropping the MPEG-2 support in QT Pro.
-DH

Video Conversion Issue

Hi there, I just got my 30GB iPod Video a couple days ago, and when trying to convert certain movies onto it, it didn't convert with sound.
I selected the Video for conversion
the Video was converted, but now will not playback on iTunes or my iPod with sound at all.
I need some help with what might be going on here.
Thanks a lot!
-Steve

Was your original file before conversion MUXed (aka multiplexed)?
If so, it may not convert correctly or at all.
I could not find a article directly about the iPod or iTunes, but this article discusses the issue. NOTE: The three symptoms in the article can be and/or.
http://docs.info.apple.com/article.html?artnum=42996

Apple response to my movie download issue. A one time refund, Read the Terms of Sale, you buy the rental you own it works or not. I tried VUDU and it works great via my PS3. Thanks for everyone input.

Hi Ernest,
Chris, here from the iTunes Store. I see that you rented the movie "Captain America: The First Avenger" from the iTunes Store and it will not play properly. When it comes to your money, I can certainly appreciate how important it is to feel that you are treated fairly, and I would be more than happy to help you out with this today.
I'm happy to report that I was able to make a one time exception for you, and have reversed the charge for "Captain America: The First Avenger," which I understand did not work for you. In five to seven business days, a credit of $3.99, plus any applicable sales tax, should be posted to your Visa.
Please keep in mind the refund will not process until payment has been received successfully by iTunes, which usually takes three to five business days from the date of your purchase. Once payment has been received, you will receive an invoice for your purchase and the refund will appear three to five business days after your invoice is sent.
It is highly recommended to monitor the order that a refund has been requested for, to ensure the purchase was processed successfully by your financial institution. If the payment or refund does not appear on your statement after the appropriate amount of time, please respond to the correspondence received and we will gladly investigate this matter further.
Please note that according to the iTunes Store Terms of Sale, all sales are final, so this is an exception which I cannot guarantee will be granted again in the future. The iTunes Store Terms of Sale are available for you to review here:
Terms of Sale
http://www.apple.com/legal/itunes/us/sales.html
If you have any further questions or concerns regarding this issue, please let me know and I would be more than happy to address them for you. Thank you very much for being part of the iTunes Store family, Ernest, and I hope you have a great day.
Sincerely,
Chris

Sorry your experience wasn't a plesant one, but most of the issues they work on are hardware in nature, not software.. I'm not taking up for Apple... I'd had my share of run-ins with them as well.
As for your iTunes issue... an EASY solution is to simply tell iTunes that the location you want your tunes stored in is your Public folder. Items in your public folder can be seen and opened by others, so your wife could easily access the files there.
For you, go to your Music folder, find the iTunes folder, and drag it to your public folder.
Next, go to iTuness>Preferences and click on the Advanced tab, then the General Tab, and the first window you see is the iTunes Music Folder Locataion. Click Change, then navigate to the iTunes folder in you Public folder.
Now, next time you purchase a song from the iTunes store, or import songs from a CD, they will be stored in the iTunes folder, in your public folder.
You wife does basically the same thing except she navigates to YOUR public folder, and the iTunes folder inside.
She will have to manually find and import any new songs you add but at least your entire library will be available for her to listen to.
There are other ways of getting the same thing done, but I think this is the easiest.
Quad 2.5 Mac OS X (10.4.6)

Conversion Issues

I am upgrading software. I used to use MS Office Pro 2003--> now 2007. In converting documents from 2007 into Acrobat Pro 8.x, I was having a problem with the page numbers not getting converted properly. For example, I use Page x of y at bottom of docs and the conversion was giving Page x of x.
SO, I figured it could be time to upgrade to 9.0 pro. I am currently using the trial version. Well, I no longer have the problem above but I have another bigger problem. The conversion is changing the fonts of most text that is centered. I could live with that some of the time, however, certain documents must retain the specific font I use. This is pretty much a deal breaker if I cannot fix this.
Any thoughts?
Many thanks and Happy Halloween.

Ok, I figured out the CAUSE of the issue. If a font is regular and not bolded in the font box, it converts correctly when bolded by the "B". However, if it is bolded through the bold box, it converts to another font. SO, is it word or adobe that is the culprit?? Therefore, what is the SOLUTION?

Movie conversion issue?

Similar Messages

Maybe you are looking for