Movie does not fit preview window

Sorry if this is a dumb question, but I cannot figure it out.
I made a short movie clip with my iPhone 5. Imported it into iMovie (it looks perfect when I preview it from the event library) and then dragged that clip to a new project. Then when I play the video from within the project, it has been heavily cropped, ie the movie does not fit in the preview window.
I have tried changing the aspect ratio of the project and this made no difference. I also change the setting File > Project Properties > Initial Video Placement to Fit in Frame.
Any help appreciated.

A lot of people who shoot video on the iPhone will hold the phone vertically oriented (portrait orientation). For shooting movies, you will get the best results when you rotate the phone 90 degrees to landscape orientation.
iMovie will always edit in landscape orientation (long side on top and bottom, short side on the sides) because this is the way TV screens work.

Similar Messages

Table does not fit into window.

Hi Guys,
When I execute the Smartforms I get this message ? '
"Table does not fit into window." any guess why this message ?
Regards

>
P R Raghu wrote:
> "Table does not fit into window." any guess why this message ?
> Regards
If TABLE does not fit WINDOW try to take it through the DOOR LOL
Doesn't the error seems self explanatory to you?
Regards
Karthik D

Error: Table TEMPLATE_HEADER does not fit into window.

Hello Experts ,
I met a very strange problem.
I am printing a process order using smartform.
for other process nrs , print perfect.
But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
At beginning , I suppose my table line extend the mainwindow width. But infact , no!
I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
so , does someone met this error before ?
Please help me!!
Regards
Kevin

Hi Kevin,
Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
Regards,
Aidan

Getting "Table %TEMPLATE does not fit into window" error

Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer. I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck. I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before? Please help. Thanks.

Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep

Video does not fit canvas window

Hello All,
When I import a clip to the timeline, it shows in my canvas with a black border. How do I make this fit the window? I do not want a border around it when I play it on DVD. Please help!?!!??

You need to have Image+Wireframe ON to grab a drag point (little squares at each corner) to re-size to full screen.
Ensure the Viewer and Canvas are set to "Fit to Window" before starting.
Double click the small clip in the Timeline, it opens in the Viewer.
Place the playhead over the Timeline clip.
When you scale the clip in the Viewer you will see it update in the Canvas.
This way you see waht you will get straight away.
Al

Lync 2013 actual size of shared presentation does not fit to window

In Lync 2013 with Win 8 - I am unable to click the actual size (fit to window) icon and see a change on screen so data being presented is hard to read. I click the icon and nothing happens.
How can I resolve this?

Hi,
Please try following registry key to change IM window size.
HKCU:\Software\Microsoft\Office\15.0\Lync
IMGCNoExtensionTabbedFrameWidth
IMLargeExtensionTabbedFrameWidth
IMMediumExtensionTabbedFrameWidth
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

IDVD movie does not fit on widescreen tv

I edited a movie on imovie and then shared it with iDVD to burn onto a DVD. In both programs the aspect ratio was set to widescreen (16:9), but whe I played the burned DVD on our widescreen TV the sides movie was too wide for the TV. Is there any other way to adjust the width so that it will fit the screen?

Hey, I found a solution - My DVD player settings! I had this problem too!
For some crazy reason the DVD player was set to standard ratio instead of 16:9 widescreen. When I fixed this everything worked. My LCD HDTV aspect ratio / 'Picture Options' settings are on 'Just Scan' and it all works fine.
Hope this is a solution that is able to help someone out there with the same problem

Table TEMPL_FW6 does not fit into window.

Hello All,
My smartform driver program is giving me this error. What could be the problem .can anyone help me out in this.

Hii
this error u can get it in smartform itself
change the width of ur template & when u specifying the text check the line types
any of them ur missing
reward points if useful
regards
Jaipal

SAP DSD - geocoding for customers - field format does not fit to examples

Hello to all,
We have a customer requirement behind this. We intend to use the DSD-Addon for several issues. One of these issues is to store geocoding information for our customer data within SAP. The SAP-Release is 4.7 with the DSD-Addon active. I checked all threads within the network and also checked SAP-Help and OSS-messages. Now our issue:
When I look at the fields for storing the geocode (Longitude and Latitude) they do not fit to the testdata I got from our customers. The data look like this:
customer:       x-Coord           y-Coord_
10001             744264,3384   6657823,32
10002             813368,6494   6699051,344
10003             790475,8379   6702787,298
10004             862729,1893   6690792,612
The fields in the DSD-Customerdata have the format "123.123456789012". So I wonder how my data could fit into these fields. Is there anybody who has experience with this? I did not find any information or examples in the SAP-Help for this. What is wrong the format of the fields or the format of the x/y-Coordinates?
Thanks in advance!
Best regards,
Gerlinde von Calle and Thomas Vomhof
Edited by: Thomas Vomhof on Oct 8, 2008 6:12 PM

Hi Srinivas ,
Let me confirm which version of SAP your using
As per your post -
1. Table total does not fit into window
     Check your table is fit in the window or not (window will be main window)
2.Error occured while sending mail SO_OBJECT_SEND, return code L (message type: warning)
Check your parameters that passing to the SO_OBJECT_SEND
3.Page format with orientation unknown (message type: warning)
     Check your styles that are using in the form
4.Form TOTALS has wrong page format (message type: error)
     Chekc your page format that is going to to support printer what your using - check the printer settings.
    I think your are using the u r own z page format
Let me know if any concerns...

Template does not fit into the window

Hello all,
<b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
I am getting the above error in when i try to preview my smartform.
The template is in footer window. I have only 3 lines in the template.
And the size of template is less than window size.
I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
If you have any suggestions Please help.
Thanks.

Hi,
Please check the following points:
1. Font size and font family.
2. Line spacing
3. Allignment.
4. Left and right margin
Deserve Rewards.
regards.

Window does not fit into page

Hi all,
I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM.
But its showing an error like 'Main window does not fit into Page'.
What could be the mistake?
Can anyone help me in this..
Regards,
Shanthi

Hi,
U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
if Your Space is small then data will be displayed in the next line.
And display The data in Smallest font possible.
Regards
sandipan

Movie 115 minutes long but does not fit in idvd project?

movie 115 minutes long but does not fit in idvd project?

Hi
There are more to this
• Choise of encoding method
• Choise ot theme/menu
• What material that was used
• Choise of encoding method
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
Professional Quality (movies + menus up to 120 min.) - BEST
Best Performances (movies + menus less than 60 min.) - High quality on final DVD
High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
• Choise ot theme/menu
Some menus can take 15 minutes or more - No Audio, No Animation and a very simple one as "Brushed Metal" - will take very little time
• What material that was used
Some video codecs need to be re-encoded first then encoded in iDVD - this can be problematic for iDVD and most often gives a poor result.
So what video/audio/photo material did You use and how did You edit it and got it into iDVD ?
Yours Bengt W

Page does not fit on paper when printed directly to printer

Hi experts,
I have developed a form in transaction SFP, using A4 as the paper format for the master pages. If I print to spool and preview and print my form from spool using transaction SP01, the form prints nicely. If I print directly to printer using the generated function module for the form (setting parameter REQIMM to true), the page does not fit on the paper (it is cropped), and also I do not get duplex printing.
Why do I get different results when printing directly to printer as opposed to printing to spool first? How can I ensure that the form is printed correctly when printing directly to printer?
thanks!
Frank

Did you check the window settings of the Firefox desktop shortcut to see how Firefox opens?
Did you try to delete the current Firefox desktop shortcut and create a new shortcut?
Use Restore or Maximize in the right-click context menu of the Taskbar icon to set focus to the Firefox application if you do not see the Firefox window.
Open the system menu of that Firefox window via Alt+Space and see if you can move and resize that window (use the keyboard cursor keys).<br />
If that works then first close all other open Firefox windows and then close Firefox via "File > Exit/Quit" to save that setting.

Table temp_bed_cess does not fit in to wondow vf02

Hi,
no print preview for a particular billing document number in VF02. but for the remaining billing documents the print preview is displaying. when clicked on ' issue output to ' screen is returned to the same screeen. This is a production server issue.
the error is template does not fit into window

Dear Sir,
    Thank you for all your replies,
the window with same name is attached in two pages and thier dimensions are different.
the window & template dimensions are as:
window first page
height 2.90 cm
width 12 cm
regarding template
c1 from 1 to 1     1 LN             9 cm 3 cm
c2 from 2 to 2      0.96 LN       12 cm
window second page
height 2 cm
width 12 cm
regarding template
c1 from 1 to 1     1 ln             9 cm 3 cm
c2 from 2 to 2      0.96 ln       12 cm
here the window height is more than the template total cells height, but why it is showing template does not fix in to the window.where as for other billing document , it is working fine, only for 6111108680.
please help me.
thanks & regards,
Dastagir

Error: 'BP category 1 does not fit the data in category 2'

Hi,
            i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
        REC(1000) TYPE C,
       END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
        FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
        FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
        FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
        FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
        FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
        FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
        FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
       END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
      CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
      ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
      ADDRESS TYPE BAPIBUS1006_ADDRESS,
      BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      STATIC    = 'X'
    CHANGING
      FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = UP_FILE
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
    WRITE:/ ITAB-REC.
    CLEAR IDAT.
    SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
                INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
    APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
    MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
          IDAT-FLD2 TO ADDRESS-STREET,
          IDAT-FLD3 TO ADDRESS-CITY,
          IDAT-FLD4 TO ADDRESS-REGION,
          IDAT-FLD5 TO ADDRESS-POSTL_COD1,
          IDAT-FLD6 TO ADDRESS-COUNTRY,
          IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
          '0001' TO CENTRALDATA-PARTNERTYPE.
    CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
      EXPORTING
        PARTNERCATEGORY         = '1'
        CENTRALDATA             = CENTRALDATA
        CENTRALDATAORGANIZATION = ORGANIZATION
        ADDRESSDATA             = ADDRESS
      IMPORTING
        BUSINESSPARTNER         = BUSINESSPARTNER
      TABLES
        RETURN                  = BAPIRETURN.
    IF BAPIRETURN IS NOT INITIAL.
      READ TABLE BAPIRETURN INDEX 1.
      MESSAGE
        ID BAPIRETURN-ID
        TYPE BAPIRETURN-TYPE
        NUMBER BAPIRETURN-NUMBER
        WITH BAPIRETURN-MESSAGE_V1
        BAPIRETURN-MESSAGE_V2
        BAPIRETURN-MESSAGE_V3
        BAPIRETURN-MESSAGE_V4.
      EXIT.
    ENDIF.
    REFRESH BAPIRETURN.
    CLEAR BAPIRETURN.
    CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
      EXPORTING
      BUSINESSPARTNER = BUSINESSPARTNER
      BUSINESSPARTNERROLE = 'BUP001'
      DIFFERENTIATIONTYPEVALUE =
      TABLES
      RETURN = BAPIRETURN.
    IF BAPIRETURN IS NOT INITIAL.
      READ TABLE BAPIRETURN INDEX 1.
      MESSAGE
        ID BAPIRETURN-ID
        TYPE BAPIRETURN-TYPE
        NUMBER BAPIRETURN-NUMBER
        WITH BAPIRETURN-MESSAGE_V1
        BAPIRETURN-MESSAGE_V2
        BAPIRETURN-MESSAGE_V3
        BAPIRETURN-MESSAGE_V4.
      EXIT.
    ENDIF.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.

Hi Pushpa,
         you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
    EXPORTING
      BUSINESSPARTNER           = SEARCH_PARTNER
      CONTACTPERSON             = CONTACT_SAP
VALIDFROMDATE             = '00010101'
VALIDUNTILDATE            = '99991231'
DEFAULTRELATIONSHIP       =
ADDRESSGUID               =
      CENTRALDATA             = WA_CENTRAL_DATA
      ADDRESSDATA             = WA_ADDR_DATA
      TABLES
    BAPIADTEL                 = I_TEL_DATA
    BAPIADFAX                 = I_FAX_DATA
BAPIADTTX                 =
BAPIADTLX                 =
    BAPIADSMTP                = I_EMAIL_DATA
BAPIADRML                 =
BAPIADX400                =
BAPIADRFC                 =
BAPIADPRT                 =
BAPIADSSF                 =
BAPIADURI                 =
BAPIADPAG                 =
BAPIAD_REM                =
BAPICOMREM                =
     RETURN                    = I_RETURN
hope this will help you
Siva

Movie does not fit preview window

Similar Messages

Maybe you are looking for