Movie exporting problems from premiere 6.5 to premiere pro cs3

Hello,
I recently made a movie with video transitions in première 6.5 and as the program crashes in Vista every time i try to export the movie (it did work with XP though before), i now exported the project to première cs3 to be able to make a few small changes and finally export it in (avi) dv pal modus.
The problem now is that pro cs3 changed all the transitions or doesn't seem to apply them. What can i do to make the 6.5 transitions work in cs3 ?
Do i have to erase them all and replace them with cs3 video (cross dissolve) transitions ? I tried a bit to see, but i couldn't change the duration, it would stay on 6 frames, even after i changed the default video transition duration settings...
Hope someone can help me. I have a PC with Vista (32 bits).
Cheers,
E

I've Imported several Pr 6.5 Projects into PrPro 2.0, and never had an issue. Now, some of these Projects (done by others) did have 3rd party Transitions and some that were probably just not available in PrPro 2.0*. PrPro was smart enough to flag each one, with the exact TimeCode, and let me know the name of each "missing" Transition. It was then a simple matter of going to each TimeCode, and replacing the missing Transition with one from either PrPro, or one of my 3rd party vendors. Did CS3 not give you these dialog screens? That would be a shame, as I found them very useful, and simplified the task of replacement to just a few seconds.
Good luck,
Hunt
* most of these Projects were started on Pr 6.5 Mac, and I am on a PC, so I do not know which Transitions might have been on the Mac. A few were definitely 3rd party, if their name was any indication.

Similar Messages

Transfer problem from Photoshop Elements 9 to Premiere Elements 9

When I transfer a slideshow from Photoshop Elements 9 to Premiere Elements 9, some slides change orientation and appear compressed. How can I avoid this problem?
Also when transfering from Photoshop Elements, Premiere Elements opens a window to record the name of the project; what is the proper setting for the project? DSLR, interface DV...?
Recording a Blueray with Premiere elements from sequences of slideshows saved as WMV (highest resolution 1024x768) , pictures do not fill the screen. I realize that the photo size (4:3) is different from the TV screen (16:9), and that cropping would be necessary to fill the screen, but is there a format WMV for wide screen or can Premiere Elements do the cropping? A wide screen ratio would be nice to have in Photoshop Elements cropping toll.
Thanks for any help you can provide.

One problem with orientation is that many viewing/cataloging programs will allow one to change the orientation, but that is only for viewing - no pixels are actually changed. A flag is placed in the metadata, telling many viewers to rotate the image, when viewed. Adobe Bridge, the big-brother to Organizer, and installed with many Adobe suites and programs, does this. It is not until one does a Save for the image, that the rotation is actually applied to the pixels. Until then, it's just an instruction to a viewer on how to display the image.
I second Steve's comments on the Scaling of stills, outside of PrE, prior to Import. This ARTICLE will give you some background and some tips for automating the process.
Good luck,
Hunt

.mov export problems

Hello,
I have a new WinXP computer with CS3 Master Collection and
Quicktime 7.2. When I export a movie (file > Export Movie) the
progress bar moves all the way to the end and hangs there. I never
get my completed file. I can see a .dat file, but the process never
completes to give me the .mov.
I have tried the Animation and H.264 codecs with the same
results. I am also able to product AVI files with no problems.
Help or suggestions are greatly appreciated,
- Jon

I found another post on this forum that resolved my issue.
For anyone else having this problem with MOV export, make sure you
do the following:
- Create a stop() command at the last frame of the animation
- Make sure there are no frames after the stop() command
Once I removed the frames after my stop() command, the export
completed just fine.
Cheers,
- Jon

Strange exporting problems from QT Pro

I have an odd problem that I hope someone can help me out with. Me and my partner run a video business. I do most of the editing and he does most of the graphics work. For 2 years now, we've had no problems exchanging and using each others files. He usually sends me QT files exported from either Adobe Premiere or After Effects. I also get a lot of photoshop files from him too. I usually import these files into my Avid, edit with them and export a final video. Never had a problem with any of his files before.
However, recently, when I use some of the photoshop files he sends me, after I edit with them and export a movie with mpeg-4 compression (from my Avid which uses QT components) I get black boxes all over the export, but only in the segments that use his new photoshop files. The rest of the export looks fine. He also recently gave me some edited video exported from his Premiere that I was going to convert using QT Pro. However when I convert to mpeg-4, I get the same black boxes. This time the source file he gave me was a video file, not a photoshop file but it was edited using a lot of Photoshop elements that he had created and edited with on his own system.
I have recently downloaded some updates including QT 7.6. So I thought that might have been the problem. But I just regressed back to 7.5.5 and the problem still exists. When I export my own footage or when I export old footage I have from him, everything is fine. But on certain new elements he gives me, I can not export to mpeg-4s. His source files look fine when I open them and play them and work in the Avid but once I export to mpeg-4 I get these issues.
Anyone have any idea why some elements that I am getting from him won't export correctly on my system? What may have changed that could cause this? This is kind of a big issue because we create a lot of content for mobile devices including Blackberries which prefer mpeg-4 video. So I need to figure this out. My partner hasn't changed or updated any software recently but there is some compatibility issue going on here.

I'm having the same issue as the original poster. I'm running the latest s/w (7.1.2) and I have removed all /Library/Quicktime items to the DT. I'm trying to export a .mpg file to Quicktime format.
The .mpg format is only playback supported by QT so it is usually best to use a third party MPEG based application like MPEG Streamclip (free) or ffmpegX (free) here if you wish to reatain audio content. If you still have a problem/are receiving an error message, then the problem could be with the file itself. Owing to its popularity, non-standard nature, and timecode sensitivity, such files are frequently corrupt -- especially when downloaded from peer-to-peer sources.

Audio exporting problems: from FCP to protool/STP and back again

--------------------------------------------------------------------------------
Final Cut Pro sound export for mastering.....sync problem
Hey,
I'm editing a 30 minute film and I have done most of the sound edit in FCP and Soundtrack pro and I want to now bring all the sound into pro tools to master the sound but every time i export sound into pro tools it seems to stretch by two or three seconds.
I have tried OMF, AIFF, XML, and Quicktime audio file sut to no avail!!!!
There are 50 tracks in the file so it is quiet large. It's not that there are handles of the file also as when I sync the file with the audio track with the video it syncs in one place but it is still out of sync in another.........It's as if the audio has been stretched!?!
If anyone has any advice it'd be much appreciated
Keith

Check the timecode rate and sync options in Protools. It sounds like a timecode or samplerate mismatch.
Especially note that 23.976fps OMFs from FCP (probably STP as well) show up in Protools as 24fps sessions. Change the PTs timecode to 23.976 to realign.

Export Problem from Motion to FCP

When I export an animation from Motion and import it into Final Cut, the clip plays faster than it did in Motion. It's as if it's playing at a higher frame rate. I know the project in Motion hasn't been rendered, but it plays too fast in the export. I've checked the export settings and I've got it on 29.97. anyone had this problem? I'm kind of new to FC Studio and Apple, so maybe I'm doing something wrong.

ram preview your work when in motion, and in your preferences, limit the playback speed to project frame rate. this way, you can see how fast your actual project is playing.

Export problems from soundtrack to FCP

Hi all
i usually works well in Logic Pro and i didn't tought that sountrack was so hard to configure.
Ok, i cant hear sounds from soundtrack pro in edit mode (i mean when i double click a track to edit in full screen)..but i already open a topic about that issue.
Now my other problem is this:
i sent from FCP a sequence to STP..i apply some effects and SAVE the sequence. But when i come back to FCP nothing has changed to my audio tracks. How is it possible?
many thnx
Message was edited by: pacoleoneaudiovisual

Well there's your problem.
Take a look at the manual. Dealing with single clips v. Multiclips is very different. Single clips are done as audiofile projects. In that case a Save will update the clip back in FCP. If you're working in sweetening and mixing a multiclip project save saves the stmp project. To get your audio back into FCP or into another location, you do an export. There's no configuring involved—just an understanding of the workflow.
Logic, by the way, calls its similar "save" a Bounce

Bulk photo export problems from iPad

I have 5000+ RAW files on my iPad (50gb or thereabouts) uploaded using the camera connector kit during a holiday. I've tried iPhoto, Lightroom, Image capture. Everything freezes up or crashes, whether I try to export them all at once or ten at a time. Help!

You can try Photo Transfer App; try and do it in a few installments.
Please read application features before you purchase.

WiFi connection problem from HP Photosmart C4780 to MacBook Pro

I have an HP Photosmart C4780 that will not connection to my MacBook Pro. I am operating on the Mac OS X 10.6.8. It was working just fine when I was using my Apple Airport to project the WiFi in my house, but I recently bought a Apple Time Machine to back up my system and have a main networok and guest network for the house. When I switched to the new device, I am now unable to get my printer to reconnect via WiFi. I have downloaded all of the recommended software from the HP site.
When I click on set up wireless connect, it starts the first step to find the device and then I wait and wait. It just sits and spins and never finds the device. Yes I have it plugged in and turned on. I did not have any problems with this prior to switch the router for the WiFi so I am guessing it has to do with that, but I am lost on what to do. Please Help

Welcome to the HP Forums FlyGirl_1350,
I see by your post that you now have the Apple Time Machine and aren't able to setup the printer again on the network.
I can help you with this issue.
Follow these steps to restore your product's network default settings. This will clear out the old router encryption.
Touch the ATM button () next to Wireless / Scan.
Touch the ATM button () next to Wireless Menu.
Touch the ATM button () next to Wireless Settings.
Use the up and down ATM buttons () to select Restore Network Defaults, and then press OK.
Touch the ATM button () next to Yes to confirm your selection.
Make sure the computer is connected to the Main Network Name and not the Guest Network name.
Vice Versa. Sometimes the printer won't pick up the Guest Network to configure the wireless.
Run the setup again.
This document provides steps for setting up the printer on the network also.
Installing the Printer Software for a Wireless Network Connection (Using an Access Point).
If you are still having issues then power cycle all the devices in this order, power cycle the router, wait till it is back up again, turn the computer off and on again, turn the printer off and disconnect the power cable for 30 seconds, then reconnect it again.
If there is anything else that I can help you with just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I move an iBook from my iPad to my Macbook Pro? I have iBook on the Mac and the iPad, and Kindle for Mac.

How do I move an iBook I bought with my iPad II from the iBook store to my Macbook Pro so I can read it on the MacBook Pro?

As long as you are using the same Apple ID for both iPad and iBooks on your Mac, you do not need to transfer the book to your Mac. It should already be in your iBooks library.

How Do I Move My Data From Old MacBook to New MacBook Pro?

Hey everyone
So I just bought a new Macbook Pro 15" to replace my old black Macbook. My old Mac runs Tiger and is an Intel Core 2 Duo. I was wondering, how do I move my files over to the new Macbook? Do I use a FireWire? If so, does the data from my old Macbook get deleted or is it still on the old computer?
I've never done something like this before so if anybody can help me on the file transfer methods, that would be great! Basically I'm hoping that all my music, photos, my iPhone data, etc.. all get successfully put on my new Macbook!
Thanks!

Hi and congrats on your new Mac.
Use the Migration Assistant (Applications/Utilities)
If both computers are using Mac OS X, you can connect the two computers with a FireWire cable and use Migration Assistant, located in the Utilities folder in your Applications folder. Migration Assistant transfers your files and important settings to your new computer.
Just launch the Migration Assistant application and follow the instructions.
Carolyn

How can I copy a movie I created from my iPhone to my MacBook Pro?

I recently had my iPad 3 and my MacBook Pro stolen. I still have my iPhone 5. I created a home video with Final Cut Pro on my missing MBP. I imported that video into iTunes and put it on my iPad and iPhone in the videos app. Now I need to get the video from my phone back onto my new MBP but have not been able to figure out how. It doesn't show up in iPhoto so I can't do it there. I tried using AirPlay or sharing but the video app doesn't allow sharing. I rescued my pictures and video clips with senuti but it did not work for the movie files. Please help. I cannot sync my phone with my computer until I get this resolved for fear of loosing the video.

If you rented it on your phone then you can't, you can only watch it on the phone - from FAQs about renting movies from the iTunes Store :
If you rented the movie on your computer, you can move it to an iOS device or Apple TV (1st generation).
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.

I'm unable to connect to my mac mini server remotely since the upgrade to OSX 10.8.5. I was able to connect without problem (from an Ipad and a Mac Pro workstation)before the upgrade which I applied last week.

I installed an update to OSX 10.8.5 last week. I've been unable to use Remote Desktop VNC from my Mac Pro working station or use Mocha Vnc Lite from my Ipad to gain access to my mac mini server since I applied the update. Any help would be appreciated!

Hi David,
thank you. I tried all the steps and the thing different is that now with my usual user the CC app crashes silently, but Photoshop and Illustrator generate a crash report with this message:
/Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/../Frameworks/amtlib.framework/Versions/A/amtlib
abort() called
terminate called throwing an exception
With the Adobe user it runs with no problems, I even tried to do a "diff" of running user processes between the two users and remove all launchers and extensions but it's still the same.
I am a developer so I use XCode and other "dotfiles" and dirs within my home directory, I'm also using Ruby/RVM, NodeJS and some other. Can some of this stuff cause conflicts?
Thank you
Vito

Export contacts from Address Book to File Maker Pro

How can I do this?
The contacts from Address book are vcf format, File maker doesn't seem to read this. What should I do?
Thanks a lot

Try Address Book Exporter.
http://www.gwenhiver.net/address-book-exporter.html

How do I transfer a rented movie on iTunes from my iMac to my MacBook Pro?

I got on my iMac today and rented a few movies thinking that iTunes would send them out to all my devices automatically. I have all the check boxes checked on all devices to download automatically. There are instructions for transfering from computer to a device but not how to do it from one computer to another.

Hi Claire,
Rentals can be downloaded from a computer to a device, but not to another computer. Here is the Apple Support article on Movie Rentals FYI:
http://support.apple.com/kb/HT1390
Cheers,
GB

Movie exporting problems from premiere 6.5 to premiere pro cs3

Similar Messages

Maybe you are looking for