Movie is bucking after export

Hey!
My Mac is 1 year old and I already made movies which are good. But this time when I export my movie in all possibilieties ( I changed fps and keyframes, tried H.264 and tried to make a DVD) it is bucking really hard. In iMovie itself I can watch it perfectly and even on full screen but as soon as I allocate the movie it is bucking. Please helb, thx, bobbyTXL

OK, that is a very descriptive word. I just haven't seen it used very often for this.
When you imported, did you "Optimize Media"?
If not, right-click on your Event or on one of your Event clips, and see if it offers to Optimize Media. If so, say yes.
If your camera is AVCHD, your clips will be optimized automatically on import. If you have h.264 clips, you have a choice. H.264 will work in the small sizes (standard definition) without optimizing. For the HD sizes, you need to optimize (unless you have a very powerful Mac). Basically, Optimization will convert the highly compressed h.264 clips to a full-frame codec called Apple Intermediate Codec. This should cure the jerkiness.
If that does not work, tell us the make and model of your camera. Also, right-click on one of the Event clips and Open With.../QuickTime Player. In QuickTIme Player, click Command-I to open the INspector. Tell us the dimensions of the clip and everything you see next to the word "format".
By the way, the Stabilization Analysis would have no impact on this. It is non-destructive to the clips. It just takes a little longer on import.

Similar Messages

QuickTime mov file disapears after exporting !

After having done this successfuly a number of times, when I try to export a FCP4 project using QuickTime conversion, the sequence renders all the way untill 100%, but the box does not close and the file just disapears... however it's space is used in the hard drives... Can someone please help ?
Powerbook G4 Mac OS X (10.3.9) Power Mac G4 450Mhz 0S 9.2.2

Hi Brian
thank you so much for your help !
I still don't fully understand waht really happned...
But I think the problem was solved...thanks to you.
I firstly tried to do exactly what you suggested: Exported the project as QT, then quited FCP, dragged the file into Compressor's Batch window, told the compressor to make a MPEG2 frm it... and here it stoped working...Submit ws subdued and I could not make it work...Then I took a look at the file QT had exported...it was a 303Mb FCP movie, not a QT.mov file, and the sequence was about 4.5 Gb !
Here I tried something else:
First, from FCP, Printed the sequence to video. Then captured it to FCP again to a new project, through Log and Capture, this time it did not need rendering and in the Capture Scratch folder after saving the new project was a QT.movie file; Dragged it to Compressor and made a MPEG2 file...
On the phone with the project's author I heard for the first time the original QT.mov files he gave me were in fact exported from iTunes under MacOS 9.2...I don't know if this can mean anything, since I have worked before with QT files exported from iTunes with no problem...
Can you please give me your insight about all this ?

Quality not the same after exporting movie made up of jpg images

Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?

Maybe I misunderstood, but did you actually put 2000 still images on the timeline? If so, there is another way. Go to Import and find your folder, and select only the first still in your sequence, then check the box at the bottom of the import windows that says "Numbered Sequence" or something like that. This will import the stills as a "video" clip.
Regarding Export, don't check Frame Blending or Max Render, the first being for a change of frame rate and the latter being useful for a downscale of the frame size.You are doing neither.
Also, never use "Match Sequence Settings". Leave that unchecked, and then choose whatever format YOU want to use for the export, whether .avi or H.264 or whatever.
Thanks
Jeff Pulera
Safe Harbor Computers

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

Motion tween created not works after exporting,but works in TEST MOVIE(ctrl+enter)

I am using adobe flash cs4 and actionscript3
my project consists several different layers using classic motion tween option available in flash cs4
my project works fine when I test the movie using Ctrl+Enter
but after exporting my animation remains stationary
If any one knows how to solve this please do reply me. It will be very helpful to me
Even it is a simple setting please do reply me .
It is very urgent.
thank u in advance

Are you using any ActionScript at all or is it all just motion on the timeline?
If you're not using any AS then you can try to add a little to force it to play. Just add a new layer at the very top. Click on the first frame (which shoudl be a keyframe - if it's not make it one) and press F9. This will open your Actions window. In the window type "play();" (without the quotes). Not sure if that will work or not but it's worth a try!
If you are using AS make sure you don't have a stop(); action anywhere that's not being controlled.
Good luck!

Motion tween created not works after exporting as SWF,but works in TEST MOVIE(ctrl+enter)

I am using adobe flash cs4
my project consists several different layers using classic motion tween option available in flash cs4
my project works fine when I test the movie using Ctrl+Enter
but after exporting as SWFmy animation remains stationary
If any one knows how to solve this please do reply me. It will be very helpful to me
Even it is a simple setting please do reply me .
It is very urgent.
thank u in advance

Are you using any ActionScript at all or is it all just motion on the timeline?
If you're not using any AS then you can try to add a little to force it to play. Just add a new layer at the very top. Click on the first frame (which shoudl be a keyframe - if it's not make it one) and press F9. This will open your Actions window. In the window type "play();" (without the quotes). Not sure if that will work or not but it's worth a try!
If you are using AS make sure you don't have a stop(); action anywhere that's not being controlled.
Good luck!

After exporting finished movie project, one clip is gone but all others are visabel

I hope someone can help me out. After importaing my movie project from iMovie into FCPX I made some changes to the project and was able to exported it. After exporting, all clips we visable with the expection of one. How can I fix this? The original event is in my list so I have no clue what is going on.

File>Relink Event Files.

What is the reason for this error? after export part of movie broken

hi, i cannot find the reason for this strange error that happaned to me for the first time, you can see the outcome here:
http://picasaweb.google.com/p.cardash/IMovieBug/photo#5164317113276584274
after exporting in imovie to h264 .mov file, from HDV project, resolution is twisted, plus, the part that was supposed to fit hole screen, is black and sometimes with little graphic errors.
i tried about 10 times, with different setting, resolutions, and other parameteres.
after exporting for ipod, everything is ok, in m4v format.
what is wrong? i use the same method for creating and also for exporting, as in previous projects. i didnt use any new transitions, efects nor titles...
any thoughts?
best to You,
Piotr

ok, i think that i know where is the problem, but i still dont what is it
ive copied my file to a new mac with just installed imovie and everything is the same,exactly the same output. so 100% positively the problem is within the particular project.
i didnt check my mackbook with TT, since i dont have it and dont want to pay i thought its for free
i`ll try later to figure out what wrong and what part of the project is bad.
for now, i think i hate imovie again :)) piece of..
let me know how your case ended.

Poor audio quality after exporting to .MOV.

Voiceover in my video sounds crystal clear in the timeline but then thin and "rattley" after export when playing back with Quicktime player. Background music on other tracks always seems to be unaffected. Audio export set to AAC, 48 kHZ, Stereo. I must export to a Quicktime .mov format because it's the only file type that I can upload to YouTube without the color quality being distorted after upload. Adobe Updater says all of my programs are updated.
Any help would be greatly appreciated. Thanks!

How did you record the VO? is it a mono or stereo track, how are you viewing the export. Sometimes when just one section of the audio is wrong it is due to audio phase problems, I have not seen this with a vo before but it might be the issue. See:
Re: 1 of 2 audio tracks missing on certain browsers (h.264)

I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/

Perfect audio in FCPX timeline, distorted after export to QuickTime mov

Anyone experiencing distorted audio with a QuickTime movie file exported from Final Cut Pro X? The audio sounds great in the timeline, but muffled and distorted after exporting it. Here's the kicker, I took that same file and opened it using QuickTime 7 and the audio is fine. I took that same file and converted it to a WMV file using Flip Player, and the audio is fine. So it would seem that the problem is the newest version of QuickTime (v10.4). If any of you have come to a similar conclusion, is there a way to remedy this? It's problematic because when I upload the file to YouTube, the distortion is present. Thanks in advance to everyone who can assist with this.
MY SYSTEM:
MacBook Pro (Retina, 13-inch, Late 2013), 2.8GHz Intel Core i7, 16GB RAM
OSX Yosemite 10.10.2
FCPX v10.1.4
QuickTime v10.4

Hi Al,
Here are the steps I use to export:
From the File menu, I select 'Share' and select 'Master File'
In the pop-up dialog box I click on 'Settings' and select 'H264' as the CODEC
I open the rendered file with QuickTime Player and the audio is distorted.
I open the rendered file with QuickTime Player 7 and the audio is fine
I convert the exported file to a WMV file using Pro version of Flip Player. The audio in the resulting file is fine.
I'm no expert but this would on the outset appear to be a problem with QuickTime v10.4. I can't seem to find a way to resolve this. Thank you for your assistance.
FYI - the audio file for the project is pulled in to FCPX as an mp3 directly from the iTunes library via the 'Music and Sound' browser.

Slideshow audio timing is off after export to QT movie

I created a slideshow in iPhoto and put one song with it. I times all the slide durations so that the music would fade out exactly at the end. After exporting to a QuickTime movie, however, the slideshow is finished before the song is... the song is off by at least ten seconds.
I believe I get better image quality if I do the show in iPhoto as opposed to iMovie, which is why I used iPhoto to begin with. But if the show will not synch, what other choice do I have?
Any suggestions?

Did you take into account the transition times. That has thrown me off a number of times. Do you have the Fit Slideshow to music option selected?
Another application that creates, IMO, terrific slideshows is PhotoPresenter. It has 25 or more themes and can save the slideshow, with Fit slideshow to music, to a variety of formats, QT, for iPod, HD, etc. This is one of their many themes.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

You can't. You can't export part of a sequence. Duplicate it and remove the bits you don't want to export from the duplicate.

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

"View Pdf After Exporting" Moves Acrobat to Background

Wow, even this forum is buggy. I just lost my entire post because the "server wasn't responding". That'll teach me to copy and paste my post into a text file before hitting the Post Message button.
Here goes again:
I've tried getting an answer for this problem in the InDesign forum with no response after a week.
OSX 10.6.7
Acrobat 9.4.3
InDesign 7.0.3
Conditions:
Step 1) Only InDesign is running. I make a pdf with the "View Pdf After Exporting" box checked. The pdf is created, Acrobat opens and displays my pdf for me as it did in 8 and before.
Step 2) With only InDesign and Acrobat running, I repeat step 1 above, I get the same result EXCEPT that Acrobat immediately pops into the background.
This never happened with any version previous to InDesign CS5 and happened before I installed Acrobat 9, sending Acrobat 8 into the background.
This is a very frustrating bug.

This is the best place to report bugs. They get counted and logged: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Movie is bucking after export

Similar Messages

Maybe you are looking for