Movie jitters/flickers when played from DVD

I've created a DVD but when I play it anywhere, (DVD Player or Mac) it jitters in some parts of the movie, usually when it's panning fast or following an object quickly.
When I played the movie from DVD SP it plays perfectly, but after I've burned the DVD or created the .img file, it jitters/flickers, I've played it in 3 different TV's and 2 other Macs and it does the same thing, NOW this is the interesting part... When I play it from my MacBook Pro it doesn't do it, it plays perfectly. What is going on???
In the DVD SP preferences I've changed the encoding from
Mode: one pass DBR, Motion Estimation: better to
Mode: two pass DBR and motion estimation: Best
the rest of the specs stayed the same
Aspect ratio: 4:3 although the movie was shot 16:9
field order: auto
bit rate: 4.0 mbps
max bit rate 7.0 mbps
I've burned a DVD from the MacBook Pro that doesn't show the problem, and when I played it from it, it was perfect as usual, but when I went back to the MacPro or to the DVD players the jitters appeared again.
Does anyone have an idea why this is happening? or what am I missing in the burning process?
In advance... thanks for your help.
Claus

I believe I am experiencing the same problem. The thing that was odd to me is that on my video only about the first 1 minute was messed up, after that the rest of the video was playing fine.
- It was the exact same spot on 4 discs that I tried burning
- I tried re-exporting from fcp - still the same spot messed up
- Also tried re-encoding in DVDSP - same result
I can only assume that there is an error occurring sometime during encoding, but I can't figure out a solution. Any ideas are greatly appreciated.
PS:
The above described was shot in 4:3 SD, exported using current settings, and encoded in DVDSP with best motion estimation, 8mb speed, bottom field order first, etc...
Right now I am working on another DVD which was shot in HD, exported from final cut using current settings, encoded in compressor using SD DVD 90 min setting, then imported into DVDSP.
I'm experiencing something similar here, but this time I have 3 different videos on the DVD. One of them, the shortest, turns out jittery and the other two turned out fine.
This is my first time using an HD to SD DVD workflow, so I don't know if I could have made a mistake somewhere along that path.

Similar Messages

Poor image quality when played from dvd just burned

I exported a FCP file from FCP using Compressor using several variations: uncompressed, compressed MPEG2 etc... brought the file into DVDSP and burned it to a DVD. when i play it from the dvd on my computer monitor it has these terrible lines and there are dropped frames occassionally. It doesnt look that way when I play it directly from DVDSP or from FCP only from the dvd. What is the problem here and how do I get a dvd whose quality matches the original?

All video brought into DVDSP for authoring is converted to the same format for DVDs, MPEG2.
Your "terrible lines" are probably interlacing artifacts. Look up interlacing in the manual. they always look worse on a computer monitor since that's a progressive display.
Stuttering can be caused by tons of oddball glitches, no way ot even start guessing from where I'm sitting.
but the whole process of going form FCP to DVDSP successfully is clearly and exhaustively explained in about 100 pages of the manuals and, yes, it really can be that complicated.
bogiesan

Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

IMovie 13 - initial frames stuttering when played from a DVD

I've edited a short movie (my first) on iMovie 13 and saved it to file and thereafter burned it to a Verbatim 4.7 DVD+RW disc. The movie operates fine when played on QuickTime but stutters for the first 30 seconds or so when played on my TV via a DVD player. Anyone got any ideas as to what might cause this and suggestions as to how to fix it please?

Hi
Most common origin to this are:
Brand of DVD used - NoName, Memorex etc cheap brands might work as Data-DVDs - BUT NOT as Video-DVDs
Type of DVD used - I only use SL-DVD-R as they also playback on older DVD-players. DVD+R for newer DVD-players. Never ever DVD+/-RW. Dual-Layers usually creates more problems than Single-Layers
BURN SPEED - Very IMPORTANT factor - I never go faster than x4 - Normally I use x2
Material used - Video Codec, Photo and Audio file formats
Video-Codec: StreamingDV, AIC and HDV (I use)
Photo: .jpg - NO .bmp or other - all converted to .jpg first
Audio: .aiff 16-bit 48kHz or 44.1kHz (as on Audio-CDs) - NO .mp3, wma etc ailient formats - all converted to ..aiff 16-bit 48kHz or 44.1kHz first
Free Space: on Start-Up (Macintosh HD) Hard Disk - I never go less than 25Gb when doing Video-DVDs (for SD-Quality Video - if HD material is used 4-5 times more are a safe low level) (Other external Hard Disks - DO NOT COUNT as space here can not be addressed by Mac OS or iDVD for it’s massive use of .temp files)
Dusty DVD-burner Laser: I use a Cleaning DVD (no liquid but the one with brushes) from time to time.
Harmed DVD-burner Laser: Easy to do by burning more than three DVDs at a time - I let it rest for 30 minutes till next batch of three DVDs. If this happened - then only a costly repair will help. It will not heal by it self.
OBS: There are more than one Laser in the DVD-Burner so other functions might work OK as Playback CD/DVDs and even burn CDs. Still being broken.
Yours Bengt W

Movies stall or hang up when playing on DVD player

I've used both IDVD 5 and iDVD 6 but the problem continues. DVD's tend to "hang up" or "stick" at multiple scenes when playing on a DVD player. The same problem occurs on all sorts of DVD player of family and friends. This issue does not happen when playing the DVD on a computer. The movies are created in iMovie and the sent to iDVD with Themes added and then burned. I've tried disc immaages vs a burn - same result.
Any ideas what is causing this problem and how to overcome?

My iMac G5 is 2 months old, so probably not an issue. I am currently using Memorex 16X DVD's, but get the stall, hang up and freeze problem when playing on DVD players. This is not an issue playing back on computers. I started making movies on a Dell a year ago using Microsoft Movie Maker and experienced the same problem. Totally different systems, different applications...but the same issue.
All sorts of makes DVD players both in the U.S. and England and Canada have problems playing my DVDs.
I have tried saving as a disc image and the burning, but not a solution.
Is Toast better than using Apple's iDVD or disk utility to burn DVD's. Is there any way to control burn speed? Does Toast allow different burn speeds? Should I use 16X DVD's or 8X or whatever?

No sound when playing burned DVD with Windows Media Player

Hello!
I made a 10 minute movie which I burned , tested and delivered today.
But it turns out that when playing the DVD with WMP, there is no sound.
I had tested the movie playing it with powerDVD, and it worked as it should. When playing it with a normal DVD player and TV it works allright.
But I had not tested it with WMP. And sure enough, when playing it with WMP there is no sound!
The ones who will show the DVD will do it from a computer to a video projector, and maybe they don't have a "proper" DVD program installed. But I heard that there was sound when playing with "VLC" which is a relief.
But I feel the need to get to the bottom of why there is no sound with WMP? Any clues?

In NTSC-land, one has but two choices: PCM/WAV or DD AC3, which is a particular "flavor" of MPEG. In PAL-land, one does have the option of MPEG (not DD AC3) as an option, but that seems to be falling out of favor.
When MS was re-tooling WMP, they wanted to add back the functionality of commercial (pressed/replicated) DVD's, but sought to limit any burned DVD's. Do not know what the mindset is now, so much could have changed with a few iterations of WMP. I have to admit that I just do not reach for it that often.
In the Project, or Disc, menus, one can tell En which Audio Transcoding to use. As John T, suggests, I would definitely do a test with PCM/WAV, and X my fingers.
If your client(s) is/are set on WMP as the player, there is hopefully a scheme that you can get to work. Also, remember that some older versions of WMP might not play the DVD at all, unless one finds the right plug-in, that basically hacked the intended setup in those older versions. Just like when delivering to a client, and not knowing their systems' calibration, or setup, trying to cover every base in a particular player software might involve a lot of work, and prayer.
Good luck,
Hunt

No sound when playing a DVD on my Lenovo 3000 N200 (0769-A44)

Hi,
I recently got an N200 under Vista Home Premium. Everything is doing well, except an annoying problem with PowerDVD 7 which is factory-installed. When I play a DVD with PowerDVD, there is no sound. With Windows Media player, MediaCenter and even MediaPlayer Classic, the sound is there. Only with PowerDVD is there no sound.
Any hint on how to solve this ?
Thanks !
.merle1.
Update 2008-04-30 : the problem only appears when playing commercial DVD that rely on AC3 codec for sound. For recorded DVD that use MPEG2-Layer2, sound is OK. Seems to be a limitation of PowerDVD OEM. However, if there is a solution ...
Message Edited by MerleOne on 04-30-2008 05:55 PM
Message Edited by MerleOne on 04-30-2008 05:56 PM

Thanks for sharing this. For the moment, and until someone finds a solution, I am relying on WMP and also on an opensource player that can play DVD, Media Player Classic :
http://sourceforge.net/project/showfiles.php?group_id=82303)
Very easy to use. May be it will solve your problem with the DVD player noise ? There is also an excellent media play, that plays DVD, and that I intend to install : JetAudio 7, from Cowon.
http://www.cowonamerica.com/download/
Message Edited by MerleOne on 05-06-2008 08:20 AM

How can I export a video that will loop indefinitely when played from a usb drive?

how can I export a video that will loop indefinitely when played from a usb drive?

As far as I know, PPro does not have that capability
If you were creating a DVD in Encore, you could put an "end action" on the video timeline to itself... so at the end of the DVD video it would go back to the beginning
I am not aware of any way to do that for a simple file

Layer disappears when playing from Flash Player

I have a dotted line animation in a layer. It shows up fine
when dropping to IE window but it disappears when playing from
inside Flash Player 7. Maybe it needs a newer version to play it
correctly but it's just a layer with a line in it. The SWF is
created with Flash CS3. Maybe Flash Player 7 comes from Studio 8
that is also on the PC.

I just found that it plays fine on Flash Player 9 which comes
with CS3. Some of the features probably are not compatible with
Player 7.

ITunes skips the first milliseconds when played from the beginning..

I have created some songs from my DAW that I wish to playback in iTunes.
But it seems skips the first milliseconds when played from the beginning.. Probably the first 100 milliseconds.
It plays correct in Quicktime Player.
Anybody suggestions?

Sorry, if you restored your iPhone from a backup of your iPod then your iPhone will end up looking just like what was on your iPod. Everything else will be deleted and, if you have no other backup, it is just gone.
The restore function is not incremental. It does not add or merge content. It simply replaces every thing on the restored device with what is in the backup.

No sound when playing a DVD...

I replaced my DVD ROM with an HP dvd 1040i DVD R/RW and there is no sound when playing a DVD? I loaded the Nero 7 essentials software that came with it. My system is a HP compac dc7600 Small Form Factor. I am running Windows XP-Pro and IE8.

Hi:
Interesting...
Does your onboard audio work when listening to music files or playing a video on the internet?
If you have sound normally but not thru the DVD player, try this free DVD playing software. I use it all the time. See if that fixes the audio problem.
http://www.filehippo.com/download_klite_codec_pack/
Download the file by clicking on the green download arrow button on the top right hand side of the page.
Paul

When playing a dvd made from idvd sound only for 1/2 of the movie

when playing a movie in idvd after burning it sound present only 1/2 of the movie. checked plenty of memory 74 GB left. checked sound imported as aiif files.
made a new theme no change. can you help please
Thanks

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi, .wma etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
IMPORTANT !
Before burning the DVD.
• Do a DiskImage (File menu and down) (Save as a DiskImage)
• Double click on the .img file
• Test it with Apple DVD-player tool
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Computer Freezes When Playing Certain DVD

I just bought my first Mac in the form of the new generation of Macbook Pros last week. There is one DVD that seems to always freeze in the same spot when playing in my computer. When I start playing from after that point, it plays normally for awhile and then freezes again. It freezes to the point that I can only shut down the computer to fix it because force quit does not work and I cannot get out of fullscreen mode. I just tried the DVD on a friend's Macbook that he bought in November and it played without any problems. Could this be a problem with the drive or is the DVD probably to blame? Any help would be greatly appreciated, including advice on closing the program without shutting down the computer.

Same problem here. Some notes:
Has occurred on at least two different DVDs for me; both unscratched and playable without issue in other drives.
I believe the picture freezes first, then the sound freezes a few seconds later. Mouse can be moved, but movement is jerky, like the mouse position is being updated at 5fps.
Hard reboot only way out; I've let it sit 20+ minutes to see if it recovers, no luck.
Santa Rosa 17" MBP Mac OS X (10.4.10)

Video does not play from DVD

On my iMAC with Mountain Lion, I exported a Video from iPhoto to the desktop, put it into a burn folder, and burned it to a DVD. When I open the Video on the the DVD, it loads as DSCN0097.AIV. When I click on the play button, I can see the progress line moving but it does not show the Movie. What did I do wrong?

You need a vided DVD authoring applicatin like iDVD. If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Object flickers when played on TV

Hi!
I imported in Final Cut several LiveType projects: one with a backround, another with some animated text and one with an object. I exported the final Final Cut project in QuickTime DVPal (same settings as the LiveType Project) and imported the .mov in DVD Studio Pro.
When I play the DVD in my TV text appears perfect, and also the backround. But the object (objects/digital/encoding, its not a still) flickers all the time. Do I have to aply a flicker filter in Final Cut to the LiveType project where the object is?
Thanks!!

First, it sounds like your fields are reversed, so you should correct that. That will almost certainly fix the problem. If you still have a flicker problem after trying that, then attack it in FCP with a flicker filter.

Movie jitters/flickers when played from DVD

Similar Messages

Maybe you are looking for