Movie Loading Message

Another seemingly simple question, yet I can't find the
answer. When I load the flv into Flash with the playback, can I
create a movie loading message and if so, how? When I went to my
site from home, it seemed to take a long time for the animation to
load, I didn't know if there was a wait to get that "hold on, I'm
loading" message. I see there is information for doing it with
movie clips and such but I didn't see it for the .flv's.
Thanks.

This is how far I am out of my league, I don't even know what
AS2 or AS3 is off hand. I have to look it up. Thanks for responding
though to this and my previous one about blurred text. You are
right on the blurred text one, I thought the customer wanted a
media bar and I needed flv to do that, now after today's meeting,
it was a miscommunication on both our parts. However, it's all done
now and ready for review. Next time, we will just use play and
pause buttons in flash. Flv is way too much work for small
animations. Thanks again, I'm sure I'll be back as I learn to make
video.

Similar Messages

I rented Iron Man 2 and it stopped 1/4 the way in, got loading message.

Last night I rented iron man 2 hd on my new apple tv and about a quarter of the way in I got a loading message and it took about 20 minutes for it to start playing again. It happened about three more times. I used Netflix and had no issue plus stream stuff from my mac with no issues. It really bumbed me out because I had not seen the movie before and it took baout an hour longer to watch with all the stops. I don't think this was a network issue rather than a glitch in the new rental streaming on iTunes. I would like a refund but I guess that is more hassle than it's worth. I hope this doesn't happen again on my next rental. has anyone else tried a rental with the new apple tv and had this issue?

Consider yourself lucky you even got to watch any of the movie! I rented Avatar last night in HD and it said it would be ready in 229 minutes. Yeah. Streaming wise the Xbox 360 has them beat hands down. I can hit play on there in HD and it starts to play almost instantly.

"resource not loaded" message

Hello!
I´ve a library that was implemented on LabView 5.1 and it worked fine.
Then, one day, i tried to open this library using LabView 7, and it
worked as well, but now, whenever i try to open the program using
LabView 5.1 it pops up a "resource not loaded" message.
Well, i´m lost... any help will be appreciated.
Thank you,
Luanna

Hi osu7582, and a warm welcome to the forums!
Did it ever work on the iBook?
Is it IMAP or POP account?
Open Activity Monitor in Applications>Utilities, how much Memory free & Hard Disk space does it show?
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

[svn:osmf:] 11137: Refactoring: Move loader base classes to traits package.

Revision: 11137
Author:   [email protected]
Date:     2009-10-25 22:33:13 -0700 (Sun, 25 Oct 2009)
Log Message:
Refactoring: Move loader base classes to traits package.
Modified Paths:
    osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/loaderproxy/VideoProxyE lement.as
    osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/loaderproxy/VideoProxyL oader.as
    osmf/trunk/apps/samples/framework/PluginSample/src/PluginSample.mxml
    osmf/trunk/apps/samples/framework/PluginSample/src/org/osmf/model/Model.as
    osmf/trunk/apps/samples/framework/SamplePlugin/src/com/adobe/strobe/plugins/smil/loader/S MILLoader.as
    osmf/trunk/apps/samples/framework/SamplePlugin/src/com/adobe/strobe/plugins/smil/media/SM ILElement.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/MediaFrameworkTests.as
    osmf/trunk/framework/MediaFrameworkIntegrationTest/org/osmf/content/TestContentLoaderInte gration.as
    osmf/trunk/framework/MediaFrameworkIntegrationTest/org/osmf/plugin/TestDynamicPluginLoade rIntegration.as
    osmf/trunk/libs/VASTTest/org/osmf/vast/loader/TestVASTLoader.as
    osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetLoader.as
    osmf/trunk/plugins/MASTPlugin/org/osmf/mast/loader/MASTLoader.as
    osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/loader/TestMASTLoader .as

[svn:osmf:] 11136: Refactoring: Move loader base classes to traits package.

Revision: 11136
Author:   [email protected]
Date:     2009-10-25 22:16:22 -0700 (Sun, 25 Oct 2009)
Log Message:
Refactoring: Move loader base classes to traits package.
Modified Paths:
    osmf/trunk/framework/MediaFramework/.flexLibProperties
    osmf/trunk/framework/MediaFramework/org/osmf/audio/AudioElement.as
    osmf/trunk/framework/MediaFramework/org/osmf/audio/SoundLoader.as
    osmf/trunk/framework/MediaFramework/org/osmf/content/ContentLoader.as
    osmf/trunk/framework/MediaFramework/org/osmf/events/LoaderEvent.as
    osmf/trunk/framework/MediaFramework/org/osmf/media/LoadableMediaElement.as
    osmf/trunk/framework/MediaFramework/org/osmf/net/NetLoader.as
    osmf/trunk/framework/MediaFramework/org/osmf/plugin/PluginLoader.as
    osmf/trunk/framework/MediaFramework/org/osmf/traits/LoadableTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/utils/HTTPLoader.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestSoundLoader.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetLoader.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/dynamicstreaming/TestDynamicStre amingNetLoader.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/plugin/TestStaticPluginLoader.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/utils/DynamicMediaElement.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/utils/DynamicProxyElement.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/utils/DynamicReferenceMediaElement.a s
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/utils/SimpleLoader.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/utils/TestHTTPLoader.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/vast/loader/TestVASTLoader.as
    osmf/trunk/libs/VAST/org/osmf/vast/loader/VASTLoader.as
Added Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/traits/ILoader.as
    osmf/trunk/framework/MediaFramework/org/osmf/traits/LoaderBase.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestILoader.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestLoaderBase.as
Removed Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/loaders/
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/loaders/

Mail won't fully load messages

Ever since updating to 10.4.5, I open Mail, and the circle that shows the progress gets to about 50% to 95% (differs every time) and then hangs. I let it sit for an hour, still nothing. The only way to stop it is to force quit, and sometimes that takes a minute or two. My modem light is blinking like it's transferring data from the 'net, but Mail never fully loads the messages. I can see the headers, but clicking on them gives me the spinning beach ball and Mail says 'Loading Message' in the preview box.
Thanks.
iMac G5 17 1.8 Ghz Mac OS X (10.4.5) 1 GB ram

Does this happen with all messages or only specific messages.
It sounds like that this might be an HTML email and Mail is trying to download images from a remote site. Perhaps the remote site is down or a certain image within the email is linked wrong and Mail is trying to download an image that isn't there.
That's a big problem with HTML emails. Try viewing plain text emails and see if you get the same result.
Bronson

Pc suite wont send or load messages

I have a nokia n70 with all the latest updates but for some reason when i connect the n70 up to the laptop and want to send messages through nokia suite it wont work. EVERY time it just says "Failed to send the message". It also doesnt load messages in my inbox either. Please help me.

I have exactly the same problem after upgrading via the "Update Phone Software" icon on the Nokia PC Suite interface.
Sending and loading of messages worked perfectly before the upgrade. Now I can not do either. Very Frustrating.
I previously had version 7.1.40.6 which which worked fine and I have now re-installed it after removing the upgraded version using: Nokia_PC_Suite_Cleaner_7_1_1.exe.
But the problem remains. Nokia Support please advise how to resolve this issue and get my current version (7.1.40.6) of Nokia PC Suite working again.

Apple Mail - why does it load messages so slowly?

On my old computer, running Snow Leopard, Apple Mail loaded messages instantly.
Now, on my new, and much, much faster retina MacBook Pro, it takes Apple Mail 2 to 4 seconds to load even a text-only message.
It doesn't even make a difference if there is a large image in the message, or not.
Mail just takes forever loading.
Have you noticed the slow-down of Mail as well?

Back up all data.
Select the named mailbox in the mailbox list, then select
Mailbox ▹ Rebuild
from the menu bar. Try to delete the message again.

I can't update iPhoto and i movie i photo and i movie the message appear message appear

i can't update iPhoto and i movie i photo and i movie the message appears
These apps cannot be accepted by your Apple ID.
These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the applications.
please help me to fix this problem
Thanks
Krishna.

You need to either delete and buy them, or get whoever holds that Apple ID to tell Apple to release them. On a Mac, deleting the applications won't affect their data, but that should be backed up anyway.
(109641)

I downloaded Firefox but can't open it. I keep getting "The connection to the server was reset while the page was loading" message. If it's a firewall issue, how do I change my firewall to accept Firefox?

I have used Firefox for a number of years but some time ago I got a virus on my computer. I loaded eset nod32, removed the virus and cleaned the old files etc. using ccleaner.com. Now I keep getting the "The connection to the server was reset while the page was loading" message and I haven't been able to use firefox since then. I have uninstalled and re-installed it several times with no avail. I suspect there is something in my windows frrewall stopping it.

If you want to check the Firewall, follow this-
1. Click Start Menu > Control Panel > Security Center.
2. Under the "Manage security settings for" click Windows Firewall.
3. On the Exceptions tab, do one of the following-
1. If Mozilla Firefox Firefox is there in the list, make sure it's checked.
2. If Mozilla Firefox is not there, close the Windows Firewall window.

When I apply a mail rule to move a message to a different mailbox, large attachments are unreadable

I have a rule in Mail: Move messages that were sent to a particular accout, to a particular mailbox. It moves the message like it's supposed to but if there are attachments over about 1 MB the attachment is no longer there, and instead there's a bunch of code in the body of the message. With smaller attachments, the message appears in the new mailbox with the file attached, just as expected. Anybody know what's up? Thanks, Bob

You can't simply feed it some arbitrary script to execute, you have to write a handler that Mail can dispatch events to. This generally looks something like
using terms from application "Mail"
on perform mail action with messages theMessages for rule theRule
tell application "Mail"
repeat with suspectMessage in theMessages
--do something
end repeat
end tell
end perform mail action with messages
end using terms from

Unable to load Message Catalog - Mqji

I have written a Java program using MQSeries Libraries. This program reads from and writes to two queues of a Queue Manager on a different machine. This program works fine when it is run from Unix prompt. But when I try to call this program from Oracle8i stored procedures, it gives the same above message :
'Unable to load Message Catalog - Mqji'.
I have loaded all the MQSeries Classes from com.ibm.mq and com.ibm.mqservices alongwith my java class file using loadjava utility of Oracle8i. I have also loaded the all mqji* files from /../mqm/java/lib directory.
Do I need to set up anything else to run my Java Program from Oracle8i database?
null

I have written a Java program using MQSeries Libraries. This program reads from and writes to two queues of a Queue Manager on a different machine. This program works fine when it is run from Unix prompt. But when I try to call this program from Oracle8i stored procedures, it gives the same above message :
'Unable to load Message Catalog - Mqji'.
I have loaded all the MQSeries Classes from com.ibm.mq and com.ibm.mqservices alongwith my java class file using loadjava utility of Oracle8i. I have also loaded the all mqji* files from /../mqm/java/lib directory.
Do I need to set up anything else to run my Java Program from Oracle8i database?
null

I downloaded a movie on itunes. When I go to play movie a message from iTunes "This movie cannot be played on this comp"

I downloaded a movie on itunes. When I go to play movie a message from iTunes "This movie cannot be played on this comp" Can anyone help?

Hi there,
You may want to varify that your system meets the minimum system requirements for viewing HD content. Take a look at the article below for more information.
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
-Griff W.

Poster Frame QT Movie linked to standard QT Movie loads in Firefox not I.E.

Ok, this may be a rare question here. Here's what I've done following a small blurb of directions in iMovie6/iDVD the Missing Manual by David Pogue. (awesome book)
I've created a "poster frame movie" in QT. This is a one -frame movie I use as the picture on the page.
This poster frame movie, when clicked, is linked to a full version of the same movie that opens in the same place. The reason for this poster frame movie is to start the QT plug-in download as soon as someone reaches my page so there is no wait time when they click to watch the movie, it should be instantaneous.
I tested this last night on my Mac with Firefox, and after clicking the poster frame movie (i.e.) the picture; the linked movie loaded right away. This worked on PC with Firefox as well.
However, when this is page is loaded in Internet Explorer, on Mac or PC, the poster frame movie is there, but when clicked, the full movies do not load.
Can anyone think of why or what setting I.E. may have that doesn't allow my QT movies to load when other browsers allow it?

Yup, that's your problem.
Before the <embed> you should add:
<param name="href" value="http://blip.tv/file/get/Awarner20-AnniversarySecondTry745.mov">
<param name="target" value="myself">
As predicted, your problem is that while the QuickTime plug-in has the HREF and TARGET parameters, they are missing from your OBJECT code, meaning that the QuickTime ActiveX Control will never see them. You need to include all parameters in both places (unless you want different behavior in IE).
Also, TECHNICALLY, you should also add a </embed> just before the </object>. The <embed> tag, like, for instance, the tag is self-closing, but the most recent XML standard (HTML is a subset of XML) says, "Thou shalt close all of thy tags". So it won't make a bit of difference in function, but it is good practice. And yes, you should also close your tags and use or , too.
(although technically we're not supposed to use EMBED at all anymore, as it isn't in the HTML spec, but it works with all browsers except IE while OBJECT doesn't always...)
--Dave Althoff, Jr.

How do i get rid of original loaded message on screen on l7680

how do I get rid of original loaded message on screen of my L7680

Hi...
pls do these steps to reset your printer back to factory defaults....
Hope this will work...
1. while the printer is on- unplug the power cord.
2. when the printer switched off- pls press and hold 3 and # key buttons while reconnecting the power cord back to the printer.
3.when you see a message " Improper shutdown" just press ok to continue
4.select your appropriate language and country to continue
5. wait the printer to initialize.
6. When you see the normal screen, reconnect the printer again back to the wireless network using the wireless set-up wizzard from the printer's control panel.
7. Try to print and scan wirelessly.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Movie Loading Message

Similar Messages

Maybe you are looking for