Movie Maker can't start, graphics card has latest drivers and Direct X10

Hi, I'm attempting to get Movie Maker to start on a 64 bit notebook which I believe has the correct specs and has latest video card drivers and direct X10 or 11, can't remember. How can I further troubleshoot this?
Bill

Hi,
Have you checked that your PC meets the minimum system requirements here:
http://explore.live.com/windows-live-essentials-system-requirements ?
Older graphics cards will often not support some of the newer technologies, even if if they have the latest drivers. Is this your issue?
Also, You may need to install DirectX 9.0c runtime components if you are running Windows 7. This will add some components necessary for programs that use older versions of DirectX, which includes Windows Live 2011 Photo Gallery and Movie Maker.
Download the full installer here:
http://go.microsoft.com/fwlink/?linkid=56511&clcid=0x409
Spencer
TechNet Community Support

Similar Messages

  • Windows Movie Maker can't start. Dell XPS L502X running 64 bit Windows 7

    Windows Movie Maker can't start. Dell XPS L502X running 64 bit Windows 7
    Used to work fine until we updated MS licence. Seems to be a problem with graphics driver, yet I've tried all the posted fixes with no luck.

    Hi,
    Due to Windows Movie Maker is an additional application, you can reinstall it for repair.
    Alex Zhao
    TechNet Community Support

  • MSI graphic card, 71.89 drivers and DOT - question

    Hello,
    I'd like to ask you about something. I've got a MSI GF 6600 DIAMOND card and installed 71.89 drivers right from NVIDIA, but I'd also like to use D.O.T, which AFAIK only works on MSI drivers.
    So, is there any possibility to force using DOT with 71.89 drivers?
    Thx for help!
    Tomasz

    Just put this files included in the MSI drivers in the windows system (c:\Windows\System32\ or c:\Windows\System\) directory
    msicpl.dll 
    nvgpio.dll

  • Movie Maker won't start

    I have a relatively new HP Pavilion, core I5, 16gb, Intel HD graphics. It came with Movie Maker installed, but Movie Maker won't start - says I need to make sure the PC meets minimum requirements. Say what? It came installed -  I expect it to work. Now what? (I knew I should have gone Mac...)

    Hello mbhaub
    The system at a glance looks powerful enough to run Movie Maker, however, the Intel HD graphics chip may not be powerful enough and can be causing that message. I found a Microsoft Answers thread where it is stated that you should update you Intel HD video drivers. The other option (especially if you intend to do HD video editing) would be to purchase a stronger dedicated video card.
    “Error code: c945000e Sorry, Movie Maker can't start …” when I start Movie Maker
    What are the Movie Maker system requirements?
    What is the exact model of your HP Pavilion?
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?

    I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?

    I'm not aware of any, not to say that there aren't any issues.
    it may have nothing to do with ntpd, there are a lot of things running.
    ntpd just happen to make the log entry at the same time as the panic.
    I would check to see if there are any updates available for you system.
    if this is the first time that this has happened. it may be (pick one):
    cosmic rays
    sun spots
    the trilateral commission
    if this happens more frequently and that traces look the same, then
    there may be a real problem that needs to be looked into further.

  • ATI Radeon X1900 XT 512 MB graphics card has failed?

    I think my ATI Radeon X1900 XT 512 MB graphics card has failed...
    This is a MacPro 1,1 (2006). We're on our yacht in a French territory, South Pacific, so local support is non-obtainium. I would appreciate any advice on how I can confirm my graphics card is dead.
    I have only 23" Apple Cinema Display for testing. The display works great on MBP, so that end is good.
    The MacPro seems to boot normally - AFAIK based on startup sounds, fan, RAM LED diagnostic lights.
    Suggestions?

    Case A) the screen goes blank at the login screen
    invoke Safe Mode (hold down the Shift key at Startup).
    This performs a five minutes or so Disk Utility ( Repair Disk) on the boot drive, then demands your userId and password, even if you normally auto-login.
    Safe Mode only loads the absolutely essential Drivers, and the graphics drivers are not considered essential. So screen re-draw may be slow, but you can check your email, surf a little, do many operations that do not require graphics acceleration.
    Edit movies? Probably not.
    Case B) your screen completely blank
    If the power-on light flashes in a pattern, that indicates not enough good RAM to start up.
    If no power light flashing, you need some function you can invoke that will show a non-graphics result.
    The Caps Lock light on the keyboard is under software Control. If it works, at least the SMC controller that talks to the keyboard is working.
    Holding down Control while pressing the Eject key on the keyboard brings up this familiar dialog box, whether you can see it or not:
    any key except:
    R for Restart;
    S for Sleep;
    Esc for cancel;
    and return for the default Shut Down
    should cause the System Beep sound. S should Sleep it, and the power light should shortly indicate that it is sleeping. Any key will then wake it up.

  • I believe my graphic card has just gone out

    I have a 2008 Mac Pro Tower and (I believe) the graphic card has just gone out. I can still access the tower remotely (via home sharing for Apple TV, etc) but the direct monitor is showing a crazy squiggle pattern (usually about five minutes after the machine initially boots). I've checked, and it's not an issue with the monitor itself.
    If this alone was the issue, I'd feel 99.9% sure I could replace the video card.
    But in addition to the video issue (during those five minutes before the video goes out) the Mac Pro is having random 10 second mini freezes where the mouse or an application launch suddenly stops.
    I'm hoping this mini freezing problem is ALSO related to the graphics card issue. I'd hate to spend the money on the card only to learn that it doesn't still  resolve half the problem.
    Can anyone say whether video card issues could also cause the processor to have clunk issues?
    <Re-Titled By Host>

    This is a FIVE (5) year old thread. Might have thought about just starting and stating in a new thread.
    Especially as the "green" symbol marks t he thread as solved and should be closed to new comments.
    Cards and options available in 2009-2011 have changed a lot in the meantime as has OS X.

  • Can I change graphic-card?

    I have just bought the iBook G4 and thought I could connect it to my Apple Cinema Display 20-inch.
    This was impossible because my iBook has a mini-VGA port while the Monitor is DVI.
    Anybody who knows if it´s possible to change to the same card that is in the 12" Powerbook?
    (the one with the DVI-mini port)
    Will be thankful to any replys.

    I'm relatively sure that you can't change the card w/o some major warranty voiding surgery and even if you could it might not work. As for the adapter mentioned above. It's described on the site as "Connects VGA/SVGA Monitor to DVI Card on Computer" which is not what you have. I'm don't know for sure, but I don't think you can drive the DVI from the current iBook w/ just an adapter unless the monitor or adapter (or of course the graphic card) has a signal processor for VGA to DVI and since you're limited to the mini-VGA port I think you need to buy a VGA>DVI converter box.
    I'd like to know what you come up with.
    Good Luck
    -j

  • HT1414 Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Can we add graphic card to macbook pro late 2011

    can we add graphic card to macbook pro late 2011

    I'm sorry, but you can only replace the hard drive and the RAM. The rest of the hardware is soldered onto the logic board, so it's not possible to replace it

  • When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

    When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been  unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

    Doublechecking. Have you also tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • The model of graphics card on my laptop and on the product specs on hp website are different

    i have an HP Pavilion 15-e001AX   laptop, the model numbers of the graphics card on my laptop and the specifications given on hp site are slightly different.
    AMD Radeon HD 8650M/8670M  is specification given on web and AMD Radeon HD 8650G + 8600M Dual Graphics is given on my laptop.
    are these 2 the same? if so why is it displayed differently on my laptop?...
    This question was solved.
    View Solution.

    Hi:
    The HD 8650M is a typo on the HP specs.  The correct name of the graphics adapter is the  HD 8650G.
    That is the onboard graphics adapter. 
    The 8670M is the discrete video adapter which is supposed to kick in when the graphics demand is too much for the 8650G.
    Now for some odd reason, the device manager lists the 8670M graphics adapter as an 8600M because that is how the driver file description for the 8670M graphics adapter hardware ID is labeled.
    But your notebook has an 8670M discrete graphics adapter.  There is no such adapter as an 8600M.
    The 8600M is the series name.
    Below are the graphics adapters in the 8500M and 8600M series
    https://cyberraiden.files.wordpress.com/2013/08/amd-gpu-8500m.jpg

  • Can't start iTunes it is saying nothing and giving me one option OK

    Can't start iTunes it is saying nothing and giving me one option OK

    Hmm, im pretty sure your not alowed to use a debit card as a method of payment , your options are credit card ( visa, mastercard etc ) but to clarify is it letting you download free stuff ?

  • I'm confused about running an external graphics card with my MBP and Thunderbolt display

    I have a new MBP 13" (not retina) with these specs,
    Processor  2.9 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 4000 512 MB
    Software  OS X 10.8.2 (12C60
    My radio control airplane/helicopter flight sim runs slow. Message reads "Warning FPS to low".
    I've been reading about using an eGPU but the info seems to be conflicting. Can I or can I not do this? If I can, what do I need?
    This is my first Mac and with this one exception I love it. Thanks for any input you folks might provide.
    John

    AFAIK, there are PCIe TB adapters like this - http://eshop.macsales.com/item/OWC/HELIOSTB1/ - but I don't know that you can use a graphics card in them with a MBP. You might want to give OWC a call, though, and see if they know of someway to bypass the onboard GPU through a PCIe card.
    Good luck,
    Clinton

  • How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

    I store different channels in a TDMS file.
    I like to have a time channel at the first position with group index 1 and number 1.
    When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
    Here are my questions:
    How does DIADEM import TDMS files?
    How gets every channel his number and groupindex?
    How can I determine which channel has which groupindex and number?
    Best regards
    Joerg

    Hi Jörg,
    i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
    Did you use the library for creating *.tdms files like in the link ?
    http://zone.ni.com/devzone/cda/tut/p/id/6471
    Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
    when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
    When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
    german version download link
    https://lumen.ni.com/nicif/d/lveval/content.xhtml
    english version download link
    https://lumen.ni.com/nicif/us/lveval/content.xhtml
    Hope it helps
    Best Regards

Maybe you are looking for

  • Fixed Asset usefull life problem

    Dear Experts I have import fixed asset master, then when I created acquisition, I see the planned depreciation calculation quite strange, SBO recognize usefull life as month, not as total depreciation month for example : acquisition date : 31 July 20

  • MacBook became slow after upgrading to Mavericks

    Since upgrading to Mavericks my MacBook Pro has become very slow. I did several things so far: Repairing permissions and Disk with Disk Utility and running OnyX. Both helped temporarily, but after a while everything becomes very slow again. Do I have

  • How do I find how a particular dameon is getting started?

    This is a new question prompted by discovering a Canon Scanner process that is getting started on my MacPro. To summarize, I have a Canon Pixma MP800R All-In-One printer. Everything has been working fine but today I've gotten 4 kernel panics in a row

  • Problem in Updating data in  userdefined form in update mode

    Dear All, I have a userdefined  form of type Document. In another report form I have a link to this userdefined form through document number. When I click the link button I am opening the userdefined form  and filling  the corresponding document numb

  • Waveforms not showing up in final cut pro 10.1.3

    Hi there, I've recently updated to FCP X 10.1.3 - mostly works fine but i've got a problem with audio waveforms (both separate audio and audio track of a video clip) not rendering/showing up when editing in the timeline. Also i've found multi-cam or