Movie Maker. I have no video displey in the preview screen.

Hi Movie Maker - I have no video displey in the preview screen.It is not our problem - said Microsoft EstoniaI tried to update Intel Driver - it says Status FailedHP estonia team does not give answer 1,5 years What I have to do - buy android? BR

Hi,
Have you installed driver for the video card ? What is your G4 ? You may also need the codec for WMM:
https://www.youtube.com/watch?v=A21Iv4Hu2V0
For HPSA, please use the link on the following article:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02028499
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.

Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.

The EXACT same thing happened to me last night! Rented a movie; it had barely started and then froze. When I touch the video app icon, all I get is a blank, dimly lit screen. None of the other videos I own will display either. Was your problem ever resolved?

I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played.

I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played. I tried again with some different clips and some worked and some didn't. This hasn't happened before. What should I do? (I am using iMovie '09)

No guarantess but try smc and pram resets,

Can you tell me if it is possible to have an emergency no on the locked screen 0n the iphone it would be great because all phones are looked so if an emergency services requires to contact a close member of you family its there for them to see

Can you tell me if it is possible to have an emergency no on the locked screen of my iPhone it would be great f you can most phones are locked know so a contact no would be great and save time in an emergency

The application Stickies makes doing this (without the need for writing and picture-taking) exceptionally easy:
http://itunes.apple.com/us/app/sticky-notes-alarms-bump-sharing/id346224003?mt=8
There is an upgrade to a "pro" version but the free version will get the job done.

I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc?

I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?

Thanks for your response,
I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all. Frans Vischer
author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
www.fransvischer.com
pamperedfatcat.wordpress.com

My iPad 2 doesn't have the app store I have looked in everything, reset the home screen and the restrictions is off but I still can't find it.

My iPad 2 doesn't have the app store I have looked in everything, reset the home screen and the restrictions is off but I still can't find it.

If you got the iPad from your school, and the Installing Apps restriction is 'off' but greyed out (as you 've said here https://discussions.apple.com/message/16137325#16137325) so that the App Store app is hidden, then it's likely that your school has set the restriction - you will need to ask them to remove the restriction for you.

Have a 4S and in the lock screen it is coming up with a screen (Not Enough Storage - This iphone cannot be backed up because there is not enough iCloud storage available. You can manage your storage in settings) it then has option close or settings.....bu

I have a 4S and in the lock screen it is coming up with a screen (Not Enough Storage - This iphone cannot be backed up because there is not enough iCloud storage available. You can manage your storage in settings) it then has option close or settings.....but i am unable to click on either or turn off the phone. I have plugged it into itunes on the computer and manually backed it up but i cannot use my phone as i cant get past this message

Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

TS1424 Downloaded a music video to my ipad2 When I pressed the video icon on the home screen it just went to a black screen. Can anyone help. Thank You

What do I do when the video icon on the home screen on a ipad2 is pressed it gives me a black screen. Thank You Chris

Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller
-- Those links are currently down for maintenance but should available shortly.

Is there a way to play a video and disable the touch screen

I want to be able to play a video and disable the touch screen so that it will play uninterrupted (even if the screen is accidentally touched). Isn't there a "hold" button?

Press the Home button once real quick to put the iPod on Hold.

HT2736 Hi I don't have a 'gift' Icon on the 'resulting screen' as per point 3 above. Any help?

Hi I don't have a 'gift' Icon on the 'resulting screen' as per point 3 above. Any help?

It is a paid-for app that you are trying to gift ? You can't gift free items.
I've just tried it on my phone, running iOS 7.0.4, and I get the gift option - what iOS version do you have ?

Why is it, if i have one video clip in the timeline, i can't just add a transition at the end of that solo clip to fade to black!?! please help!

hey there, so im making a video for a family event..
i drag in an audio clip all of a sudden this becomes the be all and end all, and i want to sync some vid clips to that audio track, so let's say i drag in a 10 second video clip, at the end of the 10 seconds, i want to add a transition to fade to black.. i go to the transition window.. choose the cross dissolve or fade to colour, but it will not allow me to drag it on that video clip.. it always ends up on the audio track. this bloody application is so confusing compared to final cut. please help!

Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

How to make a Quicktime 7 video open in the center of the screen. Answered!

I open a Quicktime video and then noticed that the video didn't open in the top left top corner of the screen, like they usually do. So I placed the video in the center of the screen and did a SAVE, then closed the video. When I the video opened again it open to where I placed the video, the center. Then I placed the video on my second screen, center. Did a save and then close the video. When I reopened the video it open on the second screen centered....................! I don't know if this happens because of my OS (10.5.8) or Quicktime 7.6.4. But it works!!! People have been asking for years how to open a Quicktime video in the center of the screen. But there hasn't been an answer or a fix on how to do this, until now...! If you do a SAVE AS you can't over write the video you need to rename the video.
Footnote: If you do a SAVE to Quicktime video. The video will lose the FAST START feature. If you need the fast start feature you need to do a SAVE AS. SAVE AS places the fast start feature back into the video. Fast start is used for videos that are posted on the internet.
Message was edited by: David M Brewer

Hi there
What version of Captivate?
Typically there is an option to click just to the right of where you type the URL.
Below is an image of the version 5 properties.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Why is the background of the navigation bar on firefox 4 grey? How do i make it have a clear background like the rest of the toolbars?

okay i downloaded firefox 4 and all was good, but today and yesterday the naviagation toolbar (you know the one with the search engine home forward and back buttons) has a grey background, the buttons arent grey but the background is and it's driving me crazy

Formatting options on the forum is showing '''''BTTF's''''' suggestion incorrectly. It should be
#nav-bar{background:rgba(255,0,0,0.5) !important; }
I have not tested this solution, so I can not vouch that it works.
 
 
'''''Oceania''''':
'''You need to update the following plugins:'''
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape
*Shockwave Flash 10.2 r152
*Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Pre 9: no video in the preview screen

hi, I am a new user of pre 9 and need some help please. My english is not so good, but I'll try my best. the preview show doesn't work, I only see a freezing picture of the scene and I can hear the sound. I tried the same with pictures, because I thought it did not work because of a wrong codec, but it didn' t work too. Its a brandnew laptop and the newest graphik-drivers are installed. I hope my english is good enough to understand. thank you.

Thank you. But I tried everything from your list, and it doesn't work yet. Maybe the programm is to complex
and perhaps doesn't figure with my nvidia graphic card.
Then now I will have a lot of fun with the Windows Live Movie Maker, not
Best regards.

How can I always have popup windows appear on the same screen as PS?

Hi,
I'm hoping someone can help me out. I have 3 displays connected to my computer, 1 of which is a tablet screen I don't use all the time. (It gets disabled and put away when I turn on SLI for video gaming, or if I just dont need to draw anything at the moment)
If I'm drawing something, I'll drag photoshop over to that 3rd screen and do my work. Later, if I want to just crop or resize an image or do simple image manip stuff, I'll drag the window back over to one of my other two screens. The problem I'm facing is that popup dialogs like the open file, save as, preferences; any new window that photoshop opens, appears on whatever monitor it did last time.
Is there a way to force photoshop to always show those windows centered or at least on the same screen the rest of the program is working on? I've been searching for a while and the closest thing I found was a setting called 'Remember Palette Locations', but it looks like that setting was removed in CS5.
I'm willing to change preferences, run some kind of reset script any time photoshop starts, or whatever, just something that will bring those new windows onto the screen I'm working on instead of where they last were. I sat perplexed for about 1 minute when I saved a picture as PNG. Went to upload it and.. ohp! it hasn't changed! Oh! There is an interlace option dialog is showing on a screen thats TURNED OFF >_>
Computer info:
2x 24" DELL Monitors (main screens)
1x 19" Yiynova Tablet Dispay (used only when drawing)
2x Nvidia GTX 560Ti Graphics Cards
Windows 7 64bit
Adobe Production Premium CS5.5
Message was edited by: Barrakoda - Added computer info

Your graphics driver's dialog repositioning option? Check that.
Mylenium

Movie Maker. I have no video displey in the preview screen.

Similar Messages

Maybe you are looking for