Movie output after Export is Broken (ever in all Formats)

German:
Hey ich habe ein Problem mit Final Cut Pro 7
nach dem Normalem Exportiren (cmd, E) ist erstmal alles ok
wenn ich das Video abspiele läuft erst alles glatt und so ca. nach 20 sec. kommt ein leicht verzerrtes Standbild und dann nach einer Minute wird alles Grün ich habe das in alles Export Szenerien durch probiert nichts geht.. alles bleibt gleich das hat mich 2 Tage Ränder und Export Zeit gekostet das Problem ist das Video muss morgen beim Kunden sein und ich wusste nicht an wen ich mich so schnell noch wenden konnte.
Engslish:
Hey I have a problem with Final Cut Pro 7 after the normal, Export (cmd, e) is all for now ok when I play the video until everything runs smoothly and so after about 20 seconds is a slightly distorted statue and then after a minute Green is all I have triedeverything to export scenes by anything goes .. everything remains the same that I wastwo days time cost margins and exporting the problem is the video must be at the customer tomorrow and I did not know to whom I could turn so fast yet.

Hi,
Is the problem when you play in Quicktime player? does the footage play fine in FCP.
What format are you exporting.
DM

Similar Messages

Movies gone after exporting out of iphoto

does anyone know why my movies were reduced to mere pictures after i exported them out of iphoto? they were working fine in iphoto, but took up too much space so i wanted to put them with other movies on a disc. and now there only pictures, no more movies. what happened and how can i get the whole movie back? please help!

Welcome to the Apple Discussions. What are the options you're using to export the movie file? Have you run the latest iPhoto updates? Other's have reported that but I think the latest update has fixed it as I can export with either the Original or Current format option and get the full .mov file.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Reduce movie size after export

Hi,
I have one problem during export movie from Premiere Pro CS4 would like every body help.
I create one project from Premiere with the setting as Picture 1, 2 as below. After that, I import files to project (file format: .mov or AE file or avi) to edit. All files is NTSC DV Widescreen setting.
When I export to "Test.avi" format from Premiere, I also choose NTSC DV Widescreen with DV NTSC video code. This file can see full resolution on computer, it's no problem. But if I burn this file to DVD order to play on DVD Player, It can't see full resolution as original (for example as below picture, out side the red border can't see on the TV).
I don't know what problem because the file is exported from After Effects, I burn to play on DVD Player, it's no problem. But import to Premiere and burn to DVD, it have problem.
I think the computer is problem so I format and reinstall windows but it's same.
So please help me to solution this problem.
Thank you.

First, thank all for kindly reply, because I'm studying and only personal for my favorite so it's useful for me.
As Ann's question, please refer the picture of Premiere export setting as below:
Also, AE setting export as below:
I also check by 03 kinds of TV but it's almost same problem so please help.

Movie Changed After Exporting

Making a movie using i-movie 9. Did some editing and watched what we thought was what we wanted. Exported and put into Magic DVD. The movie ended up being the original without all the edits. What did I do wrong?

One of the suggested paths for exporting from iMovie to iDVD on the iMovie Discussin Group is to Share to Media Browser instead of Shared to iDVD. I don't know if that will address the problem you're having but the final image quality of the DVD will be better. Go to Share Menu > Share to Media Browser. That will export it to the special storage area within iMovie that shares the video out to other iLife applications including iDVD.

Layout Issue after exporting crystal report XI in pdf format

Hi All,
I have developed a crystal report in XI version. I have set my page layout properties in the report to be in landscape orientation and A2 size sheet with No Printer(optimize for screen display) option unchecked. The problem is when I export the report in pdf and open the report in pdf for printing, it takes the printer preference settings that are set to portrait and letter format. If I change my printer prefence settings to landscape, it works fine. But, I do not want to change my printer preference settings and want that the settings that I am giving in crystal report designer must be taken for printing purposes in pdf.
I hope, I was able to put forward the question correctly without any confusion.
Can someone please help me out to find a solution ?
Thanks in advance.

Hi Akshay
Always quote the actual version of Crystal Reports you are working with. E.g.; CR IX is not quite enough and the best place to find the actual version is in the Help | About screen of the CR designer.
By CR XI, you could mean CR 11.0.x, or CR 11.5.x. If you are using CR 11.0.x, update to CR 11.5 (also referred to as CR XI R2). See this blog on how to.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Audio sync problems after export

I've been having this problem occasionally ever since starting to use Premiere Pro CS6, and it's now also happening again in the latest version of CC (just updated to 7.2.2 on W7, 64bit):
A perfectly synced sequence that plays fine in its rendered preview loses sync with its audio (or the audio with the video) after exporting to mp4. (preset H.264 format). I have tried trouble shooting by deleting all render files, restarted application and computer, played with different media players... to no avail.
Admittedly the raw footage happens to be a wmv file. Which I know is not ideal. But what bugs me is that everything is perfectly in sync up to the point of creating the export file. That makes no sense. I'm about to counteract this shift now by separating the audio from the video and making up the frame difference manually, but it feels wrong to do that and is a silly hack to something the software shouldn't mess up in the first place.
Any ideas?

Holy cow, that was easy. You were right, that worked. Doooh.
Thanks.

I can´t export any videos. All videos have only 2,3 Megabyte after export them. Can anybody Help?

After export a video, they have all only 2,3 MB. I had check the export settings but all is okay.
I use Final Cut Pro X 10.1.4
Can anybody help?

How long is your video?
Make sure you select "Original or Optimised" in Playback Preferences before you export.
When the window opens after you choose "Share", are you able to skim through most of the movie before you start the export? If you can't it suggests you have a "Range" selected. Make certain nothing is selected in the timeline before you export.
Lastly, be sure to select the Project in the browser before you export.
Andy

Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

What is the reason for this error? after export part of movie broken

hi, i cannot find the reason for this strange error that happaned to me for the first time, you can see the outcome here:
http://picasaweb.google.com/p.cardash/IMovieBug/photo#5164317113276584274
after exporting in imovie to h264 .mov file, from HDV project, resolution is twisted, plus, the part that was supposed to fit hole screen, is black and sometimes with little graphic errors.
i tried about 10 times, with different setting, resolutions, and other parameteres.
after exporting for ipod, everything is ok, in m4v format.
what is wrong? i use the same method for creating and also for exporting, as in previous projects. i didnt use any new transitions, efects nor titles...
any thoughts?
best to You,
Piotr

ok, i think that i know where is the problem, but i still dont what is it
ive copied my file to a new mac with just installed imovie and everything is the same,exactly the same output. so 100% positively the problem is within the particular project.
i didnt check my mackbook with TT, since i dont have it and dont want to pay i thought its for free
i`ll try later to figure out what wrong and what part of the project is bad.
for now, i think i hate imovie again :)) piece of..
let me know how your case ended.

Quality not the same after exporting movie made up of jpg images

Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?

Maybe I misunderstood, but did you actually put 2000 still images on the timeline? If so, there is another way. Go to Import and find your folder, and select only the first still in your sequence, then check the box at the bottom of the import windows that says "Numbered Sequence" or something like that. This will import the stills as a "video" clip.
Regarding Export, don't check Frame Blending or Max Render, the first being for a change of frame rate and the latter being useful for a downscale of the frame size.You are doing neither.
Also, never use "Match Sequence Settings". Leave that unchecked, and then choose whatever format YOU want to use for the export, whether .avi or H.264 or whatever.
Thanks
Jeff Pulera
Safe Harbor Computers

After export movies works and then is not working anymore?!

Hi guys,
i am capturing HD movies to my final cut express HD..Edit them, expert as quick time movie (option self contain is OFF). Then i test the movies and they are like they should be. Then i import them into IDVD and IDVD accept some and some not. So when i check the not accepted movies they only play the sound. While 10 minutes before the movie was working correct.
After a few times (making the same movies again and again on the same maner) IDVD accepted alle the movies. But when i wanted to burn the dvd it gives me a error about a missing movie file, again and again?
It worked all okay when i made my other dvds.
The only thing changed at this system is that i upgraded to Ilife'11
What am i doing wrong?
Thanks in advance!
Ps. my movies are HD (1080i)

Could it be that the link is broken after i change the movie from folder to a >other folder ?
The FCE Project File or the export?
Sequence>Render Only>Mixdown.
This action makes one temp file out of all your audio. It makes a difference to exported files playing correctly in the audio department.
Al

Jumpy video after Exporting Quicktime Movie from PS CS4 Extended

I am trying to produce a short training video for work. I created my entire movie in iMovie '09, and decided that it desperately needed some arrows and text to clarify some of the more technical aspects. I exported it as a Quicktime file from iMovie and imported into Ps CS4 extended.
After I finished the editing, I chose to export my video, again as a Quicktime movie.
The export completed, and when I went to review my movie, it was extremely jumpy. Watching the time line on the bottom of the Quicktime screen, I noticed that it was jumping in multiple second intervals. The audio portion seemed normal, but the video kept freezing and scrambling.
I attempted re-exporting the video with the Quicktime settings of Animation, and Frames Per Second set at current.
No difference.
Any ideas what I am doing wrong????

Marian -
Thank you for your response. I am only an amateur video editor, and up until now, I hadn't bumped up against the limitations of iMovie too often. You are definitely correct, it would FAR easier to do these effects in FCE, FCPro, AE, Premiere, etc., except for one thing . . . I don't own any of those programs! (I've already ordered a copy of Final Cut Express, but it stinks to have to spend $200 to get $7 worth of personal functionality.)
I do, however, own the extended Ps CS4. And, to paraphrase the guy on Lynda.com, "You already have it, and you know how to use it . . . It should work for you . . ."
This is the information on the file, it was exported this way automatically by iMovie (They don't give you much control over these functions.)
Unfortunately, I trashed my output from PS as well as the .psd in a fit of rage! It wouldn't take me more than 30 minutes to recreate it . . .
Would it be worth attempting to export it using H.264 instead of the animation Codec?
Message was edited by: dmisita

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

Motion tween created not works after exporting,but works in TEST MOVIE(ctrl+enter)

I am using adobe flash cs4 and actionscript3
my project consists several different layers using classic motion tween option available in flash cs4
my project works fine when I test the movie using Ctrl+Enter
but after exporting my animation remains stationary
If any one knows how to solve this please do reply me. It will be very helpful to me
Even it is a simple setting please do reply me .
It is very urgent.
thank u in advance

Are you using any ActionScript at all or is it all just motion on the timeline?
If you're not using any AS then you can try to add a little to force it to play. Just add a new layer at the very top. Click on the first frame (which shoudl be a keyframe - if it's not make it one) and press F9. This will open your Actions window. In the window type "play();" (without the quotes). Not sure if that will work or not but it's worth a try!
If you are using AS make sure you don't have a stop(); action anywhere that's not being controlled.
Good luck!

Movie output after Export is Broken (ever in all Formats)

Similar Messages

Maybe you are looking for