Movie playback, frame skipping

hi,
when I play avi movie, it looks like one frame is flipped or in wrong order. It happens randomly, but more often with high cpu usage.

Solved it – hope this helps someone else.
By moving (and saving elsewhere) my Logic preferences, I narrowed it down a preferences problem. Turned out to be my setting for plugin delay compensation – not an early suspect, given that it is for AUDIO. I had it set to "All", in order to eliminate the several frame shift rendered to my bounces when using the AdaptiveLimiter. After setting it to "audio tracks and instruments", the video lag ceased.
It will difficult to remember to change that setting every time I bounce a final mix, but at least the problem is solved.

Similar Messages

  • ITunes 10.6/Quicktime 7 1080p playback issue/frame skipping

    I have a playback issue with the 1080p videos on the recent version of iTunes - 10.6. I also tried playing the same videos on Quicktime where I was able to find that the videos were playing at around 20fps as opposed to their normal rate - 24fps~25fps.
    I seem to barely meet the 1080p playback requirements on iTunes, but I know that I'm able to watch 1080p videos on Window Media Player(WMP) 12 without any issues. Aside from WMP, I'm able to watch 1080p videos on Youtube whenever hardware acceleration is enabled. I assume that WMP utilizes hardware acceleration as well.
    The playback issue/frame skipping is probably caused by iTunes 10.6 not using hardware acceleration.
    Windows Hardware
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    To play Standard Definition video from the iTunes Store, an Intel Pentium D or faster processor, 512MB of RAM, and a DirectX 9.0-compatible video card is required
    To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor, 1GB of RAM, and an Intel GMA X3000, ATI Radeon X1300, or NVIDIA GeForce 6150 or better is required
    To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor, 2GB of RAM, and an Intel GMA X4500HD; ATI Radeon HD 2400; Nvidia GeForce 8300 GS or better is required
    Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
    16-bit sound card and speakers
    Broadband Internet connection to use the iTunes Store
    iTunes-compatible CD or DVD recorder to create audio CDs, MP3 CDs, or back-up CDs or DVDs
    My PC specs:
    Pentium Dual Core 2.3 Ghz
    2GB DDR3
    Intel GMA X4500MHD

    Bump!  Sounds the same as my problem, but maybe no one but us are having the issue since no one will answer any of my posts

  • ITunes movie playback, audio and video not in sync after upgrade to Mountain Lion

    After upgrading to Mountain Lion I have problems with iTunes movie playback, and the audio/video at times stalls/delays, or skips a few seconds, or even gets out of sync.  I feared this problem was isolated to my machine until I saw an article online: http://reviews.cnet.com/8301-13727_7-57489874-263/sound-stuttering-after-mountai n-lion-installation/.  I have 2011 iMac 27" with 16G RAM and am running the latest iTunes and Mac OS X software, and shutting down extra programs doesn't help.  Please let me know of any solution.

    I also have this problem, and some videos will no longer play in iTunes.
    I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
    Unacceptable! This hardware and software is too expensive to have these performance issues.
    2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

  • Frame Skip on MPEG2-DVD Export with 24fps source file to 23.976

    I'm trying to solve an issue that I've been having for the past week on a DVD I'm hoping to get to the factory for replication by New Years.
    My source file is a TRUE 24.00fps 1080p Quicktime Uncompressed (it was shot on film, and originally released on film...that's why it's true 24 instead of 23.976)
    I put it in a 720x480 24fps sequence in Premiere CS5, and exported as an MPEG2-DVD for my upcoming DVD.  I used the following settings:
    Quality 5
    Frame Rate: 23.976
    Field Order: Progressive
    Pixel Aspect Ratio: Widescreen 16:9
    Render At Maximum Depth
    VBR 1-Pass
    Min: 2.8
    Target: 6
    Max: 9
    GOP Settings:
    M Frames: 3
    N Frames: 12
    The resulting DVD always seems fine when I'm playing it, the motion and field order look great.  But in the exact same scene with a heavy-motion steadicam shot through a hallway, there always seems to be a frame skipping.  An entire frame that just goes missing for no apparent reason.  It is not a consistent frame....it changes every time I encode, but it is always within 2 or 3 seconds of the same place in the movie.  The wierd part is the movie doesn't seem to fall out of sync....this frame just disappears.
    Any help would be much appreciated.  This is driving me up a wall!!!!
    Thanks,
    Doron Kipper
    DoronKipper -a t- gmail.com
    www.MisdirectionMovie.net

    1st, you should not put your email in a message, since it WILL be harvested & used by spammers
    2nd, I don't do 24p but isn't there a "pull down" setting you have to use?

  • Netflix frame skips on AppleTV 2?

    For some reason when I watch:
    Apple TV 2 (One that supports 1080p)
    1080p HD on Netflix
    Ethernet Plugged in
    Latest software update
    Download Speed: 32 mbps
    Uplaod Speed: 1mbps
    It runs fairly smooth, no audio and video sync issues. But randomly ever 10 to 30 seconds the movies frame skips or the movements don't seem as fluid. It's not a big issue but I was just wondering what could be the problem?

    Hmmm, if your ATV2 truely supports 1080p, then a lot of people bought 3'rd gens for nothing

  • Movie playback issues

    My movies are having playback issues again. Default settings are 44.1kHz  16bps  720p HD.
    Operating System: Windows 8
    Itunes Version 12.1.0
    The issue is the sound goes in the beginning of each film. I have a computer which is two years old and yet there seems to be a recurring problem with movie playback.

    I think it depends on which version of iTunes you are using. I had the same problem with digital copy movies when I loaded the 64bit version of iTunes 8.1, iTunes64setup.exe, on a Vista machine. Once I deleted that version and loaded the 32bit version of iTunes 8.1, iTunessetup.exe, I was able to view the movie in iTunes AND download it to my iTouch.

  • Apple TV 2 - Not synching correctly during movie playback

    Hi all,
    Recently bought the new Apple TV and have set it up fine. During some movies playback I notice the picture starts to jerk and then the sound is about 1-2 seconds ahead of the picture. To rectify this I have to pause the video, then play. When I pause, I can see the video playing catchup to whichever point in the sound I paused it at.
    Is anyone else having this issue? Or does anyone know what the cause of this issue is?
    The movie plays fine on my iMac with no synching issues. Im assuming its because my iMac is running and using its processors at that given moment. Some of my movies are MKV files encoded to MP4 via Handbrake.
    Some help or advice would be greatly appreciated.
    Cheers

    It could well be because your Mac is heavy on resource usage running handbrake which will use as much CPU power as is available to do the job.
    Having said that I've seen this occasionally with ATV1 and ATV2, and recently I've wondered if it's iTunes doing something else eg automatically downloading a subscription podcast, and effectively freezing to other processes like AppleTV streaming as it saves a podcast to disc.
    The other obvious candidate is the network not quite keeping up with streaming demands and running slightly behind.
    Try playback without Handbrake or other intensive processes running - does it behave better?

  • Movie playback madness....?

    Hi gang...
    I want to create a .swf that is 1080p.
    There are 6 .f4v movies (each 320 * 1080) playing at the same time...
    Can flash player handle this?  I understand that flash player runs on the CPU and not the graphics card?   So do i just need to get a monster pc....
    or is this movie playback madness...!
    g

    Hi david...
    thanks foy your response...
    What hardware or GPU spec would you recommend...?
    Its seems that NVIDIA ION is a good choice...maybe one of these?   http://www.nvidia.com/object/IO_88869.html
    g

  • My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.

  • Zoom in/out, Move through frame WITHOUT changing the placement/crop size?

    How do you actually zoom in and out of a frame, move through it up and down, WITHOUT changing the crop size or placement of the frame?
    Scaling doesn't do it...

    I mean I don't want the crop size or dimensions to change but I want to move the frame around within the same crop dimensions. Does that make sense?
    While showing the image and wireframe in canvas, I should be able to adjust framing without changing dimensions by shift and dragging up or down, but I'm guessing it doesn't work once I've cropped the image since the dimensions are filled to the edge with black.
    How can I accomplish this task. The clip is already in a sequences timeline.
    Message was edited by: monaya

  • Move a Frame with a mouse click!

    Hi. Well i have an application that have a menu bar where i can select a few frames! I want select one frame and my question is, when i click with the right button of the mouse how i can move the frame to the arrow of the mouse! I already implemented the mouse listener and the program responds correctly when i click on the right button but my problem is move the frame to the arrow.
    How can i do that?
    Thanks for your help

    dialogs in java have the "setLocation()" method to change their position

  • HT202042 I am using Sony wireless headphones. I can pause playback or skip to next song using controls on headphones but unable to get any sound.

    My operating system is Windows 8.1. I am using Sony wireless headphones. When playing songs in itunes I can pause playback or skip song but am unable to get any sound. I know the volume is ok and connection is ok. I have tried complete uninstall and re install with no solution. Any help will be deeply appreciated. Blues43

    Why are you posting in an Apple forum? Ask Microsoft or Sony.
    Barry

  • Does anyone know how to fix a 1st generation apple tv that plays moves by frames?

    My 1st generation apple tv is playing moves in frames. Does any one know how to fix this?
    I have done a factory reset but did not work?
    I have checked that I have the latest softwear 3.0.2. Is this the problem?

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode use this program
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Toshiba L4353 39" - USB Movie Playback Problem

    Hi,
    I recently bought a Toshiba L4353 39" smart tv, the usb playback does work but i keep having this really annoying problem,
    basically i'm watching a movie file and everything is fine and then for no reason the playback of the file stops and i'm back at the my content screen, this has happened on multiple films and have tried a few different HDD so i can only assume it's the TV, help?
    Thanks, Martin

    Did you test the movie playback using an USB flash memory stick or just USB HDD?
    Does this issue appear playing movies supporting different file format?
    In the [user manual page 89|http://www.toshiba-om.net/LCD/PDF/English/L4353-323950-English.pdf] you can find information about the file compatibility
    Please check if the movie files are encoded properly and use the supported video and audio codec

  • Move multiple frames in the motion editor?

    Hi! Is there a way to move multiple frames in the motion editor (CS4)? Like now I have to move them one by one and it's hard to make them keep their values coz the shift+move doesn't seem to work. Or should it?
    Regards / Jimmy

    You can move multiple property keyframes for a single property in the Motion editor. Shift-click them and then drag. You cannot move keyframes across different properties, however.
    If you want to move *all* keyframes on mutliple frames, you want to do this on the main timeline. Ctrl/cmd+drag across the frames to select the multiple frames, and then drag them on the tween span.

Maybe you are looking for