Movie Playback Problems - works on one machine, not another

Embeded a Windows Movie Maker using Acrobat 9. Works on my machine, but not another. Both are Windows machines. The other machine gets an error message.
What could be the problem?

I embeded a wmv file -- just because that's what i created the file with.
I think I may have solved the problem -- I converted the wmv file into a
flv for acrobat 8 and higher, then embeded movie file into the pdf.

Similar Messages

Drill Through to HFM Works for One Location, Not Another - Same Adapter

Good morning all -
I have two locations that both use the same adapter to load to the same HFM application. One location produces the drill through files, one does not.
I've seen several posts about needing separate applications for multiple adapters, but surely this doesn't apply if the adapter is the same? Am I missing a location specific setting somewhere?
Thanks in advance,
Sarah

This was a stupid mistake on my part. I looked through the output and never saw the A, B, C files get produced, so I assumed it never worked. I failed to notice that we had also always had .err files, which prevents drill through files from being created. I answered my own question on the phone with Oracle support. :)
Thanks for your response.

Joystick problem. works for one comp not the other.

Hello all,
I am trying to acquire data from my joystick. it's a simple vi with
initializing joystick vi and acquire input data vi and it works
perfectly flawlessly fine on my office computer windows xp, but once i
try the same vi with the same joystick in my lab, it does not read out
anything but the default values for axis info or direction info. the
only difference i can see is that the lab computer uses windows
2000...both have directX 9.0 installed since i saw that these vis
require directx 8.0 or higher.
from system panel's game controller, i can successfully test my
joystick and it works fine for both computers...but the vi just don't
seem to work in the windows 2000 one.
both comp have labview 8.0.
any suggestion in how i can fix this? what would be the reason to this?
thank you all!
Attachments:
joystick2.vi ‏23 KB

Hi,
i have built a robot which with compactRIO-9022 onboard, and i'm controlling it
with joystick logitech attack 3. I haven't used it for a month or so, and now when i tried to use
it with other computer my joystick doesn't work - tried couple of computers with the sam version of labview 2010. My vi
doesnt see the joy - basic examples for joy neither. It even started to work on my basic computer on one VI and doesnt work on the other pograms.
I simply don't get it.
Do you know a solution to this problem ?:}
here is what i came up with :}
http://www.youtube.com/watch?v=M8iL3INO0kI
thanks for any help - i sold the robot and it's not good that it doesnt want to wrok

Windows XP3 Firefox works for one use, not another.

Using windows XP SP3 and latest Firefox. On normal user Fire fox suddenly will not load. Click on Icon and it seems to load but does not appear on desktop. Looking in Windows Task Manager it looks like ti is running. Never appears open on desktop
On user "Admin", it boots and works normally. BOTH Admin and other user are admin security levels.
I have downloaded and installed the latest update but no change.
Thunderbird works normally on all users. There are only two user names on this machine. My problem is with another machine. I have compared some settings from this one to the faulty on and found no noticable differences.

Occasionally the Firefox window will get off screen. Here are three different
approaches to getting that window into view. One of them should work! 
'''''Firefox Window "off screen" — Arrow Key Method''''' 
If you know that Firefox is off to a particular side, you can use the arrow keys
to move it back on screen. You only need to move it far enough to be able to
click the title bar and then you can drag it the rest of the way. 
Make the Firefox tile active on the task bar and press this key combination
to start moving the window: 
Alt+Spacebar > m 
(To clarify, that's Alt+Spacebar to open the window control menu, then the
letter m to start moving the window.) 
Press the arrow key for the direction you want to move the window, e.g., press
the left arrow key to move the window left. Press the Enter key to complete the move. 
'''''Firefox Window "off screen" — Maximize + New Window Script Method''''' 
If Firefox is nowhere to be found but you know it's out there, try this method.
Make the Firefox tile active on the task bar and press this key combination to
maximize the window: 
Alt+Spacebar > x 
(To clarify, that's Alt+Spacebar to open the window control menu, then the letter
x to maximize the window.) 
If that works, try this: 
(1) Copy the following line of code to the clipboard (it's all one line...): 
newwin=window.open(window.location.href, "_blank", 
"width=640,height=480,menubar,toolbar,personalbar"); 
newwin.moveTo(0,0); 
(2) In the maximized window, press Ctrl+Shift+k to open the web console. 
(3) Press Ctrl+v to paste the line of code next to the caret (») then press Enter to run it.
A new copy of that page should open in a window positioned at the top left of the screen. 
(4) Switch back to the maximized window and close it first, before doing anything
in the new window. 
'''''Firefox Window "off screen" — Remove Settings File''''' 
If you can't move or maximize Firefox, you can rename or delete the settings
file that stores the last window position. 
(1) Open your currently active Firefox settings folder (AKA Firefox profile folder).
From the Start menu (Run box or search box), paste this into the search box and press Enter:
 %APPDATA%\Mozilla\Firefox\Profiles 
This should open a window showing one or more Firefox profile folders. If you have multiple
folders, look for the most recent. Click into your profile folder. 
(2) If Firefox is still running, right-click it on the Task Bar and Close all Windows. 
(3) Wait a few moments for Firefox to finish updating files in your profile folder, then rename
'''''localstore.rdf''''' to something else, like localstore-bad.rdf or localstore.old.
Alternately, you can delete the file. 
(4) You're done with your profile folder and you can restart Firefox now.

PC laptop works on one Airport, not another?

My boss is having issues connecting his Fujitsu netbook. Here at our office, he connects with the Linksys router. At his office, his netbook connects fine with his Airport Extreme Base Station. At home, not so much. He gets an "Acquiring Network Address" message that doesn't go away. Here's what he says:
"Further to our discussion about the problem connecting my Fujitsu (using XP) to my Apple wireless at home…
As I mentioned, it works fine on my office system, using the same Apple wireless router, as well as at your place with the linksys.
At home, when you look at status it says "acquiring network address", and it notes the correct network name. If you look on the support tab, it says "invalid IP address", and if you click "repair" is says "renewing IP address", but just keeps trying to do that forever. And I have tried unplugging all the various parts. No difference.
Any ideas?"
"They are both Airport Extreme Base Stations and look the same. The office
Model number is A1354 and the offending one at home is Model A1143."
Security: "Yes, the standard Apple secured password setup."
Thanks for any help.
Joe

This look and feel
com.sun.java.swing.plaf.windows.WindowsLookAndFeelis not the same thing on all window platforms. Case in point, the Vista one differs from the XP one. And in the Vista one, if I do something like this
UIManager.put("Button.background",java.awt.Color.BLUE);then I get this behavior
I use UIManager.put("Button.background",Color.BLUE); and what I see is a button with a blue outline.Which is why I thought you might be running Vista.
Basically, though, not all the platform specific look and feels can be customized through the UI defaults. Your Work PC has such a system dependent LookAndFeel.

Drill Back from HFM works for one year, not another

Hello,
We are on FDM and HFM 11.1.2.1 and I was doing some reasearch in the system today and for some reason in all periods that were loaded during 2011 in this version (Aug-Dec) I am able to drill back to the FDM source data. However, if I go into 2012 and try a drill back for Jan or Feb it does not work and I get the below error message. I'm guessing there must be a setting I'm missing somewhere, but can't figure out why the year would make a difference here.
Error: No Locations were found matching the passed intersection values. Please verify:
1) that the target system (originating the drillback) is properly configured;
2) that the FDM POVs have not been retroactively modified or compromised.
Thank you,
Jason

Yes, that is what the problem was. After talking with Oracle support apparently when you upload new periods via the Excel template it does not update the tpovperiodadapter table, which is needed for the drill back from HFM to work. In order to fix this I had the DBA go in and manually update the 4 fields (see below) for the 2 periods we had already loaded for 2012 and all is working now. I also went back and deleted all of the other future periods and added them manually via the FDM web interface.
The table has the following collumns:
PeriodKey
IntSystemKey
PeriodTargetM
YearTarget
Period Key would be the period date
IntSystemKey would be the adapter system code that was used to load the data to HFM
PeriodTargetM would be the target Month in HFM
YearTarget would be the target year in HFM
Example:
PeriodKey - 1/31/2012 (format needs to be the same as what's currently in the database)
IntSystemKey - FM11X-G5-E
PeriodTargetM - Jan
YearTarget - 2012

Photostreams from Aperture working with one iPad, not another

I've been created a Photostream in Aperture and while it appears in my iPad 3, it does not appear in my other iPad 2 (model A1219). I've verfied that Photostream is set to ON, and the software is up to date. I also notice that in Settings>General>iTunes WiFi Sync, the "Sync Now" button is greyed out, even though my iMac is on, and the wireless network is working fine. Any ideas? I've attached a couple of screen shots of iTunes so you can see what's enabled.

I'm not sure what the difference is between a regular an shared photo stream. Within Aperture, I have a collection of photos. I selected all of them (in this cae, about 60), and clicked the Photostream icon.
When you click the "PhotoStream icon in the Toolbar, you should see this:
Have you used the default "My Photo Stream" or selected to create a new stream? A new stream would be a Shared Photo Stream and not available on IOS 5.1 devices.
Otherwise I am running out of ideas, sorry.
Léonie

How to copy/move Portal database from one machine to another?

I am receiving a ORA-22973 error (size of object identifier exceeds maxmum size allowed) on the wwsec_enabler_config_info$ table when attempting to import my entire "portal30" schema from one database to another on different Windows NT Servers.
Background: I had Portal 3.0.9.8 installed, configured, and running with the following setup:
Machine 1: Windows NT 4.0 SP 6, Oracle 9iAS 1.0.2.2, Oracle Portal 3.0.9.8
Machine 2: Windows NT 4.0 SP 6, Oracle 8i Database 8.1.7.0.0
We no longer have use of Machine 2 and needed to move the database over to Machine 1.
I performed the following steps:
1. Installed Oracle 8i database 8.1.7.0.0 on Machine 1.
2. Set up the tablespaces in the database on Machine 1 to match the same names and sizes of the tablespaces in the database on Machine 2.
3. Used the Oracle "exp" command to export the entire database that resided on Machine 2.
4. Copied the ".dmp" file to Machine 1.
5. Used the Oracle "imp" command to import the entire database on Machine 1.
6. The import completed successfully with warnings. But I had received the ORA-22973 error during the import process.
7. After it completed I compared the list of tables and packages in the "portal30" schema between the two databases. The wwsec_enabler_config_info$ table is missing.
8. I tried to export and import only the wwsec_enabler_config_info$ table between the two databases, but continue to receive the ORA-22973 error.
Without the table being created, access to the portal cannot be achieved.
Here are my questions:
1. Is there anyway to create the wwsec_enabler_config_info$ table without receiving the noted error?
2. Is there any other workable way to get the portal database from Machine 2 to Machine 1?
I am aware of the portal import/export utilities but that would require me to run through the 2 hour install of Portal 3.0.9.8 on the database on Machine 1 and then individually export and import all the portal components (security, pages, applications, content library, etc). I merely wanted to transfer the entire database from one machine to another, so I felt the Oracle exp/imp utilities would be quicker and less work.

Hi,
I've been hitting problems with Portal 3.0.9.8.1 against 8.1.7.2.1 on NT - i.e., Intermedia not working at all, and have been advised by support to move back to 8.1.7.1.1.
I don't want to lose any of my content in the Portal since the db upgrade and am wondering on what is the best way to do this.
The version of the Portal will be the same so I am hoping I can just use the Portal export and import utilities, as afterall, it is just data and the schema structures are the same between db versions. I'm also hoping that the Portal export doesn't use the standard Oracle EXP tool as it doesn't work anymore on 8.1.7.2.1 on NT!!
Regards,
John

SSIS package works on one machine and gives conversion error on other machine

Hi All,
I have 150 + packages, I am fetching data from Oracle (11g) and loading in SQL Server. My problem is all the packages works fine on one machine whereas some of the packages give error "cannot convert between unicode and non-unicode string data types"
on other machine. Please note I have implemented data conversion in all the relevant packages and I have used SSDT for the migration.
My question is why the packages are working on one machine and not on another machine? How can I fix the issue without changing the packages (as it works on one machine) and where should I look for the problem?
Thank you for your help!!

One more observation, the machine on which all the packages are working reads char, varchar, nvarchar and nchar data type from source as DT_WSTR whereas on other machine it reads as DT_STR and DT_WSTR.
Can you check the datatyype mapping definition file under
<installationdrive>\Program Files\Microsoft SQL Server\110\DTS\MappingFiles
and see if two systems have any difference in file contents for Oracle to SSIS mapping?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

Open picture B, the one you wish to select the hair from to add to the picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the hair to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the hair from picture B.
In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer.

How I can movie the DSC Security defined in one machine to another ?

I have a LV 8.01 and DSP in a development machine. When I move all vi involved to another computer ( with LV PDS ) all security definitions was lost. I'm using a DSC Security. Waht I can do to move the security definician ( domain and users name ) from one machine to another ?
Thanks,
E.R.B
Project Manager

Problem:
I have developed an application with the LabVIEW DSC module and I created and used an NI Security Domain. Now I want to move this application to another network or PC. How can I keep the Domain settings for the new PC/network?
Solution:
You should copy the directory located at Program Files\National Instruments\Shared\Domain to the same location on the destination PC. To apply the changes you should restart your computer.
You can also completely remove the NI Security Domain (if you forget your password, etc.) by deleting all the files from this Domain folder.

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

Easy way to migrate users from one machine to another?

I have an iMac lab where students have their own local accounts. The machines are bound to W2k Server with AD. New school year, new seating charts, some users must move. Is there an easy way to migrate a user and all their stuff from one machine to another? We do have Remote Desktop BTW. I'm not finding an obvious answer so I guess there isn't but I sure wish there were. I suppose they could copy anything they want onto the server. set up a new account on the new machine and pull it all back off the server, but that's not "easy".

Hi
+The machines are bound to W2k Server with AD.+
This could be a telling statement although without further information it would be hard to say?
What I'm assuming from this is that current mac clients are bound to Active Directory. This would mean that user accounts exist on the Server and not locally. In which case there would be nothing to transfer other than the local admin account - again assuming you want the applications installed on the current client macs transferring over to the new client macs.
To be honest it would be easier and less hassle to create a new local admin account and install compatible software fresh. Use the same tools you used to 'bind' the old client macs to Active Directory for the new client macs.
+We do have Remote Desktop BTW+
You could utilize this to (a) name all the new mac clients with appropriate hostnames and (b) 'bind' new mac clients by issuing dsconfigad from the command line. If this seems like too much hard work then you could simply exercise your legs and walk round each one in turn.
Even if your current mac clients are configured with Mobile Accounts (locally cached network accounts) this would still not be a problem as you can manually or automatically sync the locally cached networked home folder back to the server and then log in with that account again on the new mac clients. The home folder should then be cached locally.
This assumes you've configured Directory Utility in the appropriate way.
Tony

Recovering data from one machine to another

Hi all;
I've mentioned this in another thread but would really like to deal with it. Recently, I had to move my iPhone from one machine to another. All was well and I managed to move all my apps from one machine to the current one. The problem is with a purchased app called TripLog that stores data on driven mileage. On moving the app over, I didn't get the data.
I contacted the software people and this is what I got:
"As far as data, the iTunes software automatically backs up all data to the desktop. The "Apple data" (contacts, calendar, etc) are backed up to the corresponding desktop apps (Address Book, iCal, etc) but data from "3rd party" apps are backed up in an encrypted, totally nonaccessible (to anyone but iTunes) format. That is used by iTunes when you do a "Restore".
"I would call Apple tech support if I were you, because unfortunately, that's all we know. The data IS somewhere on the desktop (I believe) but how you could transfer it to a new handheld I have no idea."
So the question is, Where is that data stored? In my user/Music/iTunes/Mobile Apps folder there were three versions of this app. I tried moving them all over and kept getting dialogs asking me if I wanted to repace an older version with the newer ones I was moving over. Since my iPhone and the new host computer didn't have TripLog I assumed I should replace but now I am not sure.
I can stil move over these files, but I have a feeling that they are not data so much as simply the app itself. Where is that data stored?
For the record, I have moved files from an iMac G5 to a Macbook running 10.6.1 and iTunes 9.0.1 with an iPhone 3G running 3.0.1
Help?
Stan

Many thanks!!! One more question; do I just move that file over and drag and drop or do I need to do an import into the folder, "Automatically Add to iTunes?" Further, will this affect all my data on the phone? For example, I have synced and made changes in things like iCal, Address Book, Mail, etc. Will the last few days be wiped out or replaced by the moved-in data?
Stan

How do I properly transfer CS from one machine to another

I want to remove my apps and license from one machine and move to another. I uninstalled CC, but the apps are still on the machine and functioning? Will I be able to move to a new machine without trouble?

There might not be a need to depending on your preferences. You are allowed to have two working installations, so you could keep the original as a backup if you like. If not, then you need to sign out of the original thru the manager. As far as getting the software on a new machine, you need to install them using installation files the same way you installed originally... moving software from one machine to another does not work.
Download/install the desktop application, sign in, install the subscription application(s).
Creative Cloud Help / Download, install, update, or uninstall apps
https://helpx.adobe.com/creative-cloud/help/install-apps.html
Creative Cloud Help / Creative Cloud for desktop
https://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Activation & deactivation help
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Creative Cloud Help / Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

Movie Playback Problems - works on one machine, not another

Similar Messages

Maybe you are looking for