Movie plays wrong audio, EyeHome plays correct audio

I have a video that I ripped from a commercial DVD for use on my Eyehome. The MPEG2 file apparently has two audio tracks (for lack of a better term). When played in QT, I get the commentary audio, and when played via EyeHome (same file), I get the music soundtrack which is the correct one. Why? When I view properties, I see two line items and one is MUXED mpeg2. If I uncheck it, I get only a audio file window instead of a video file window.

retrieving an incorrect file from you cache isn't likely to cause that problem. the opposite problem would be seen if a cached file were used: a new sound should play but an old one plays in its place.
more likely is a faulty setup on your part.

Similar Messages

Embedded Quicktime not playing correctly in InDesign PDF - please help!!

ok - I have an issue that I can't work out and I'm hoping someone can help - tried searching for an answer to no avail. I've just built my first interactive PDF portfolio in InDesign. I should point out that I'm a producer/editor, so my knowledge of InDesign & Acrobat is not extensive. The PDF includes some embedded Quicktime movies. The movies play normally on one of my monitors (Samsung 1680x1050), but will not play correctly on my other two monitors (2x Samsung 1280x1024) - the audio plays and the play controller appears to be working but the video area is just all white...HOWEVER...if I open the PDF and play just one of the videos on my 1680x1050 monitor first, then all videos play correctly on all monitors. Have tried opening the PDF on another desktop and the movies do not work (in the same manner as above)- also tried on my laptop and the movies play correctly. Please help if you can - I need to get this out to clients and I'm baffled!! Thank You!

Is it as easy as wmode: transparent after shoving the swf into a table??? does the transparent option make everything outside the table dissappear? thanks...

4x3 Movie playing in 'widescren preview' in a 4x3 Project

I've imported an iDVD project to my new Mac from my old one. The new one is running iDVD7.1, the old one 6.04.
Everything is cool apart from one Movie (out of 10 which play correctly) which plays in Widescreen Preview.
I've deleted and re-imported it, but it makes no difference. The movie plays correctly in QuickTime on both Macs.
Any ideas why or what I can do?
Thanks
Tom

Follow these instructions completely. iDVD: DV widescreen 16:9 workflow from Final Cut Pro at http://support.apple.com/kb/TS2179
If this still doesn't help, look at Inverse Anamorphizer - you can find it via Google.
It requires QuickTime 7.6.x and won't work with the QT X Player.
You don't need to launch Inverse-anamorphizer - just put the icon on your desktop and drag your movie file on top of it.
You DO need to have QT 7.6.x running (in the dock) if you are running Snow Leopard because SL comes with a new QT X that DOESN'T work with Inverse-anamorphizer
It creates a REFERENCE movie so don't move your original movie location!!!

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

HTML5 Wistia and Vimeo hosted videos are not playing correctly in Firefox (Choppy, hangs on frames, jittery audio)

Hi, for some reason I can't get HTML5 videos hosted by Wistia or Vimeo to play correctly in firefox. I tried doing a fresh install of firefox, running version 35.0.1, and the videos still don't play correctly. They constantly load, videos hang on frames, and the audio gets jittery. However, if I switch to flash they do play correctly. Videos on youtube play fine. I can't figure this out. I tested the same videos with Safari, and they play correctly, which tells me there's something not right with Firefox and perhaps my system.
I use a MacBook pro (Mid - 2010) with OS X Yosemite, 10.10.2.
Any ideas?

Try to disable all video player extensions in your Firefox and test the site that is giving playback issues. Turn on each one until there is an obvious difference.
Some video formats/codecs may not be supported by one over the other.
Right click on the HTML5 player and select: "About HTML5"
It will tell you that youtube has automatically enrolled you in their beta testing and to opt out you click the link on the bottom to stop seeing HTML5 videos.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver. This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

My TV show purchases don't play correctly. When I click on them, a black screen with no audio plays. The timecode for the show runs, but I don't see or hear anything besides that black screen. Help!

My TV show purchases don't play correctly. When I click on them, a black screen with no audio plays. The timecode for the show runs, but I don't see or hear anything besides that black screen. Help!

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

How to play a mp4 movie with DTS audio?

Hello,
I try to play a mp4 movie with DTS audio on the z1 player but i dont get any sound...I also have downloaded the app mx player, but this also wont play the dts audio. Any suggestions?
Thanks,
Edy

http://forum.xda-developers.com/showthread.php?t=1831111
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Ibook sync problems also audio books wont play correctly

I updated my ipad from 4.3 to 5.0.1 now I am unable to sync my books in one go with out the other folder showing in excess of 24gigs plus when I try to listen to an audio book ipod player will only play the first chapter then I need to select the next chapter and so on where as with 4.3 the chapters would just play one after the other I would be great ful of any help thank you.

Just I case any ones reading this I've found out that I'm not the only one who's suffering these faults with all of the apple products i.e. iPod touch, iPhones, and the iPads are all the same with this spurious other folder in iTunes when the devices are plugged in when I contacted apple care for help with this the so called technication tried to explain it was the iOS operating system that was accounting for the other folder when asked to explain how any operating system for a tablet or any device could be in the region of and above 20gigs he just went silent and it was hard to get another word from him he even refused to allow me to speak to his boss???
As for the audio books the only work round I have found is to use a free programme called Audacity 1.3 for windows you can also get this prog for the mac as well it allows you to stitch audio files together so in stead of having for example 3 large files for and audio book with say 5 chapters in each file you can stitch them all together as one large 15 chapter file it also allows you to adjust the meta data which is very handy.
Depending on how many chapters you have can take some time to do this but is so well worth it when if it was not done you could have an audio book with 150 chapters of 3 mins long which would mean every 3 mins you would have to select the next chapter to play or if it was all stitched together you just select remember last position in the iTunes file info and no more worrying about selecting the next chapter and if you don't listen to the audio book right the way through you can start off right where you left it last time.
I hope that this info has helped any one who like myself is having the same fault with their audio books not playing correctly.

Multiple audio files play in chapters at the same time, movie plays fine

Created movie in iwork imported thru quicktime to idvd, movie plays with 2 consecutive tunes, but in chapters both tunes play at once? Do I change to one tune, what if one is not long enough?

This is very strange, difficult to guess the cause... never had such an issue. Normally when the object to which the audio is attached disappears the audio stops. So in your case going to a next slide should stop the audio of the previous slide. Same with object audio.
Do you have the different audio clips (one per slide) in the Library? Could you try to delete the audio on the slide and drag it again from the Library to see if you have the same result? And what happens when you attach the audio clip to an object on the slide (you can create a totally transparent rectangle with no stroke that will not be visible to attach the audio).
Lilybiri

MOV files from Ipad not playing correctly in 2010 Windows PPT presentation

I inserted .mov files taken from Ipad 2 into a.ppt on my work PC. I saved these files to the folder containing all of the videos I am showing in the ppt-- the same folder where the .ppt is located as well. Then I inserted them as I do all videos (I create ppts often for work) -- and the clips that are horizontal play fine but the vertical ones do not play correctly- audio and video not in sync. any remedies? (using ppt 2010, converted files to wmv, didn't work either). I should add that when I viewed these files on my PC (by just clicking the file) they play fine, but they are not rotated correctly. This must have been my fault when I took the videos. However, when I insert them they are rotated correctly but just don't play right - looks like a Japanese movie. please help!

Your page code doesn't give instructions to any browser plug-in and uses the out of date "embed" tag:
embed src="hippiehouseshowreel09.mov" width="460" height="360" hspace="2" align="left"></embed
The same code is used at all of your other popup windows and Internet Explorer doesn't know what to do (so it does nothing).
<a class="jive-link-external-small" href="http://">http://developer.apple.com/internet/ieembedprep.html shows the more modern code that works with all browsers.
http://www.qtbridge.com/pageot/pageot.html free software that can help write perfect code.

IDVD burns wrong music but iDVD preview plays correct music

I'm creating my second DVD-based slide show by exporting the slide show from iPhoto to iDVD. (Am using iDVD version 5.0.1.)
When I preview in iDVD the correct music from my iTunes plays. After I use iDVD to burn a DVD image and then try to test that via the DVDPlayer, the music from my first iDVD-created slide show plays instead. (I've also burned an image to DVD and played on a hardware DVD player with same problem resulting.)
Of course I have no idea how iDVD is getting so confused on this matter.
Is this a known bug? Does anybody know what is happening here?

For what it is worth, I am having a similar problem and have spent coutless hours to resolve. No Solution Yet. When formaing a Playlist from iTunes everything plays as it should. When the playlist is selected for a iPhoto slideshow, music plays as it should.
When exporting or going to iDVD as a slideshow, Theme music can be selected and it plays correctly. Audio is selected in the custom slide window for the playlist. The goal is to have music play during an entire iDVD slide show. I have never been able to have more that the first iTune on the playlist play music. I have contacted Apple many times on this issue and no one can solve it. Looping makes no difference, re-installing all of the iLite software does not help, nor anything else. I even installed Roxio to see if exporting iPhoto with a playlist would make it ok and it does not. Roxio is removed.
The only way I know, so far, to make this all work is to select a iTune that will last through the entire iDVD. I believe that there is a serious bug here as no one at Apple has a answer either (after numerous calls) so the problem is still there.
Does anyone have a solution? Thanks.
PeterLT

Final Movie wont play correctly.

I have a FCE project that contains some clips that have some additional SFX from After Efects, When these clips was imported/created into AE then finished, I would export them as QT movie encoded as animation. I then would import them into FCE and complete the project. I then exported the project as a QT movie encode as animation again. when I uploaded the final movie to youtube it plays fine. however when I copied this same file to a DVD (700 mb+ files sz) via Toaster v6, the dvd will not play correctly. the sounds is fine, but the Video stutters, then catches up, then pauses, then catches up again.
I thought it was the encoded file (animation) but then I change the final export to NTSC and saved to a CD (400 mb)same thing. I've tried a laptop that was an IBM and the dvd and CD still didn't work correctly. copied these file to the laptop and tried to play them same problems,
Any chance anyone know what I am doing wrong here?
Shiyonin

How to report an issue with Your iTunes Store purchase

HT1498 I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

Embedded movies not playing correctly in recorded playback

60 slides, about a dozen with short movie or animation clips saved as .mov or .m4v files.
Everything plays correctly in a regular presentation. When I try to do a recording within Keynote using my own timing, all appears to be well, however, when I play back the recorded movie, the animation clips have stalled and stuttered during the recording process.
I've tried reducing the file sizes, etc.
Thanks,

This is a typical page I'm having issues with - http://www.bbc.co.uk/sport/0/snooker/22193792
John

After loading the new OS now my songs do not play correctly. Titles are wrong on songs and it just doesn't play certain songs in random play or even if you select them individually. What's up? Kind of frustrating!!!

After loading the new OS my songs do not play correctly, is anyone else having this issue? Titles are wrong on songs and it just doesn’t play certain songs in random play or even if you select them individually. What’s up? Kind of frustrating!!!

I had the same issue. In fact I posted it yesterday, but didn't get any replies. I physically synched my phone to PC iTunes. on the PC, under the phone/music tab, I unchecked the synch music box and then the apply button to remove all of the music from my phone. Then once that synch finished, I went back and selected all music, and synch music and apply to put it back on to the phone. So far, I haven't had an issue again, but I also haven't listened very long. Hope this helps!

Movie plays wrong audio, EyeHome plays correct audio

Similar Messages

Maybe you are looking for