Movie Problems with multiple devices

I have an IPad 2, Itouch(4th Gen) and IPhone. I have downloaded all of my movies exclusively from Itunes but only the latest movie will sync to my IPad and Iphone. The Itouch will sync all of the movies but the other devices will only sync the latest one that I downloaded last week. When I sync them it shows a checkmark but will not change the space used bar or show up on the device itself. For some reason they all sync just fine with my Itouch. Do I need to have Home Sharing or something else on? Any help would be appreciated as Apple wants to charge me to talk to someone from their support organization.

That warning occurs only if you try to create a new Apple ID using an email address already in use. An existing Apple ID can be used with mutiple devices.
What exactly did you do when you got that message?

Similar Messages

Problems with multiple devices using same apple ID

I have a Macbook, iPad and iPhone. After doing an IOS update now my devices keep saying I cannot use that same appleid because it's already taken. I cannot find away around this and want to know experience of others

That warning occurs only if you try to create a new Apple ID using an email address already in use. An existing Apple ID can be used with mutiple devices.
What exactly did you do when you got that message?

Problems with multiple devices

I've got a Korg X3 synth hooked up to my eMac thru a Midisport 2x2 interface. All was well. Then I hooked up an American DJ DMX Operator to control my lights for live shows. I've got the X3 using a single in and out port, and the Operator on the other out port. LE will talk to them both, but not at the same time. Everytime I try to change the port on one midi track, LE changes the port on ALL the midi tracks. So I end up with all my midi being transmitted to either the X3 or the Operator. I would just send the midi for the Operator on a different channel but the Operator listens to all channels and gets easily confussed, so it has to have its own dedicated port.
Is there a way to change the port for just one track at a time?

That warning occurs only if you try to create a new Apple ID using an email address already in use. An existing Apple ID can be used with mutiple devices.
What exactly did you do when you got that message?

Imessage problem with multiple devices

Hi. My wife and I got new iphone 4 each 2.5 years ago. Mine was ruined. And I took hers. Switching out the SIM card. To retain my number. She got a new 4s. And placed her SIM card in there. We also have an IPad. For some reason. We both get all the iMessages. We each send. I've gone to the settings. Messages and tried to turn off the email address in my fone. But it will not let me. Plus. My original fone number. Does not even show as a possible choice for imessage. I'm sooo confused any help would be great. Thanks.

You need to completely sign out of imessage by sliding the iMessage slider to the off position. That slider is in Settings -> Messages. I suggest once its off you hold the power button then slide to power off. Once off for 1 minute turn phone back on. Go back to Settings -> Messages and slide the iMessage slider back on and be sure to enter or use the desired appleID with the phone.
Trifster

We have multiple users, each with multiple devices, on 1 apple id - as we want to share music and ibooks etc. We want the children to have access to the store, but with a financial limit. How do we do this?

We have multiple users, each with multiple devices, on 1 apple id - as we want to share music and ibooks etc. We want the children to have access to the store, but with a financial limit. How do we do this?

Welcome to the Apple Community.
That's simply not possible I'm afraid. You'd need to give them their own account and allowance or make it so you are required to be there to input the password when they wish to make a purchase.

Problem with multiple Toplink/JPA apps in same server

Anyone have experence of running serveral Toplink/ EJB-3 Web apps in the same server (OC4J, alas)?
We seem to get a problem with the second app failing to initialise toplink, with an entity not found message. Each app runs OK on it's own.

Yes, they access the same datasource and most of the tables overlap.
We're thinking it might help to have common entity classes and put them in a shared library, but I don't know if this is relevant (setting up shared libraries complicates testing and tends to snowball, I reckon we need about 15 jars all told).
I''ve had some funnies on OC4J before which I think may be to do with it's use of ClassLoaders, for example I initially put persistence.xml in the libary jar with the data model, but for some reason I get the entity not found error that way. It only seems to work if it's in the classes folder.
For the moment we're getting arround the problem with multiple OC4J instances in the server.

Problem with PnP devices, Unknown device, error code:28

Hello, my USB Mass Storage Device Not Recognized( Flash drive- HP v156w, 16 GB)
Full story : I opened flash disk, started to loading and opening files very slow, suddenly all writing, names of the files become unreadable. I took off the flash disk and try again. I got the message- disk have to be formated to be used
again. After a lot of try I got this message:
Unknown device doesn't have a driver ; and Problem with PnP devices when i run trouble shoot in devices and printers on my Sony VAIO laptop( Windows 8, 64 bit), and error code:28 for unknown device doesn't have a driver.
Do other usb devices work ok in the same usb port? - yes
Has someone else/or you used it on another pc?- yes
Does it work ok on a different pc? - the same problem
Did you pull it out with using 'Safely Remove Hardware'? - yes, a lot of time after its become invisible, unknoun
Was it previously working ok with your W8 laptop? - never tried befor
Disk Management can't see the drive.
device manager:
usb device with yellow sine and instead name strange sines
divice tipe - other devices
manufacturer - unknown
location- on USB Mass Storage Device
status: The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
I have done that -
"open device manager make sure show hidden devices is ticked and right click on all the USB hidden devices and unistall them. once done reboot and put in the flash drive again and see if windows finds it."
situation the same(((( Disk Management can't see the drive.
please if any one know the fix please help
Its very important info for me on the flash disk.

I'd ask them over here.
http://answers.microsoft.com/en-us/windows/forum/windows_8?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US

With multiple devices (.g, .n, .ac) will the Time Capsule degrade to the lowest speed, or will each run at the highest rate it is capable of?

With multiple devices (.g, .n, .ac) will the Time Capsule degrade to the lowest speed, or will each run at the highest rate it is capable of?

Highest rate capable.
Things may slow down a bit if you have a number of wireless devices connected simultaneously, since they must all share the same network bandwidth.

Problem with exporting devices to non-global zone

Hi,
I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
A create cfg for my zone.
Here it is:
$ zonecfg -z sapdev info
zonename: sapdev
zonepath: /export/home/zones/sapdev
brand: native
autoboot: true
bootargs:
pool:
limitpriv: default,sys_time
scheduling-class:
ip-type: shared
fs:
dir: /sap
special: /dev/dsk/c1t44d0s0
raw: /dev/rdsk/c1t44d0s0
type: ufs
options: []
net:
address: 194.29.128.45
physical: ce0
device
match: /dev/lofi/1
device
match: /dev/rlofi/1
device
match: /dev/lofi/2
device
match: /dev/rlofi/2
attr:
name: comment
type: string
value: "This is SAP developement zone"
global# lofiadm
Block Device File
/dev/lofi/1 /root/SAP_DB2_9_LUW.iso
/dev/lofi/2 /usr/tmp/fsfile
I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
Can anybody help me?
Thanks for help,
Marek

I experienced the same problem on my system Sol 10 08/07.
Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
This worked well until recently. Now only the directories are still created.
It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
# cp /dev/lofi/1 ZONEPATH/dev/lofi
Hope this helps,
Konstantin Gremliza

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

A problem with PoE devices in the Topology view (LMS 3.1)

Hello,
the customer has a problem with PoE devices in the Topology View. :-( He doesn't see the 2960 PoE devices with the PoE filter enabled in the topology view:-( He uses LMS 3.1 on Windows.
In the NetPro discussion I found that the list of PoE devices is in the following file:
POECapableDeviceTypes.properties
but I cann't to find thid file in the campus directory. In the campus folder are following folders: bin, etc, lib and www.
Thank you
Roman

The file is in NMSROOT/campus/www/classpath/com/cisco/nm/ani/clients/campus/main/filters/POECapableDeviceTypes.properties.

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

HT5622 Hello - my wife and I use the same appleID (legacy of our first ipod) and now that we've gone to the cloud with multiple devices, is there a smart, easy way to either segregate the data in the iCloud to each of our respective devices or ?? Thx

Hello - my wife and I use the same appleID (legacy of our first ipod) and now that we've gone to the cloud with multiple devices, is there a smart, easy way to either segregate the data in the iCloud to each of our respective devices or ?? Thx in advance ...

Hello eagjdw
You can keep the one Apple ID for purchases and then create another one for a personal account for contacts and calendars. The article below will assist further
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Movie Problems with multiple devices

Similar Messages

Maybe you are looking for