Movie Project doesn't work

I've just installed the Apple box set bringing me up to date with iLife11 and the latest OS and I really wish I hadn't spent the money.
Apart from the fact my Tascam interface doesn't work now and I can't use Logic, GB is taking forever to load and everything appears to run much slower.
But enough of that..
I've tried to open a movie project but after it opens I just get the spinning beach ball before I get a chance to do anything. I've had to force quit GB each time as I can't get past the SBB.
Anyone else had similar issues?
Thanks
Message was edited by: Zoomman

What type of subtitle script have you used?
Are you sure you used the same framerate and drop frame?
Adobe Encore * Subtitle scripts

Similar Messages

  • [Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

    When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

    I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
    Photoshop cc 2014
    windows does not work
    mac does work
    Did you already post over here:
    [Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

  • After Mavericks upgrade I lost  the current I Movie project I was working on.  All that is left is the video clips, no photographs, music, transitions or titles. Three weeks work gone!

    I upgraded to Maverick from Mountain Lion.
    I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system.  I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects  to allow it to work with the upgrade.
    As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie.  I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles.  All that was left were the thirty-seven video clips and nothing else.  Where has all my work gone and how can I retrieve it.

    rob2433 wrote:
    I upgraded to Maverick from Mountain Lion.
    I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system.  I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects  to allow it to work with the upgrade.
    As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie.  I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles.  All that was left were the thirty-seven video clips and nothing else.  Where has all my work gone and how can I retrieve it.
    It should still be on your backup drive. Try reimporting it.
    Pete

  • TS2289 I don't what's going on but everytime i press my spacebar to see my movie it doesn't work at all!!! What can i do?

    Can someone helpe me with this??? Everytime i press my spacebar to see how my movie is going it doesn't work at all!!!!!!!!

    Did it run OK under a new User-Account ?
    If so - then the need to clean out iMovie to re-install will not help at all but just be complicated.
    If it did run OK - Then
    • Delete iMovie pref. file
    iMovie pref. file resides.
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
    not the Library at root level = first window when opening Your Macintosh HD (Mac OS) Start-Up HD
    and is named. (one or more of these)
    com.apple.iMovie.plist
    com.apple.iMovie3.plist
    com.apple.iMovie7.plist
    com.apple.iMovie8.plist
    com.apple.iMovie9.plist
    com.apple.iMovieApp.plist
    and find
    com.apple.iApps.plist
    While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
    Now restart iMovie.
    If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
    ( It can be done like this: Open Terminal, then enter: chflags nohidden ~/Library
    Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
    To find all parts of iMovie to trash to make a Clean Install - is not easy and there will be others that can guide You trough this process. - I never needed to do that - and I used iMovie since iMovie (1) > 10 Years
    Yours Bengt W

  • Edge project doesn't work in browser

    Hello,
    I made a Edge project that's works perfect offline, but aftre publising it doesn't work from the publish map offline and also online after I uploaded to my site. However its works allright on my iPhone 4S.
    Does anybody know what is worng?
    (The URL: http://basmonkey.nl/timer/beta/2.1.2/index.html)
    Bas, The Netherlands

    Hi Bas,
    Looks like you're still using Animate 1.5 which we do not actively update to keep up with browser changes. I haven't seen this issue with CC, are you able to give your project a whirl with the new version and see if it persists? Browsers are constantly in flux as they intoduces updates and we keep up with those changes in the latest version of Animate.
    Sarah

  • QT movie controler doesn't work ...

    After draging and placed a QT movie (h.264) and published my site, the movie controler doen't work ... I keep clicking on it and nothing happens .... The movie only starts if click twice over the movie and stops if I click once ....

    QTKirk ..... You are the Man ! You will not believe but I had just found the solution when my mac emmited a sound "saying" that I had a new message and it was yours ! After 1 and 1/2 day trying to solve that damm issue, I though that it could be the problem. I turned on the layout view, increased the page height ... placed the movie a little bit above the footer line and VOILÁ !!! All movies played smoothly well .... lol .
    Despite I had already found the solution, I said that "you are the man" because not even the Apple Guys at their "Chat Dept." could help me .... I'm an Editor, not a Web Designer and because of that I was already thinking that iWeb does not deal very well with videos edited in Final Cut Pro and encoded/compressed via Compressor..... Thanks for have spent your time answering me and keep giving good advices as you did, as someone who knows what is talking.

  • "move" command doesn't work in case of files on network

    I setup a theWatchFolder fold on network as Watch Folder. This works like when the folder on network gets a file, I'm notified via email and the file should move from watch folder (which is on network) to theDestinationFolder (which is also on another network). I used "move" command for that but it copies the files from the theWatchFolder to theDestinationFolder but doesn't move. And there, script shows error "An item with the same name already exists in this location."
    global theWatchedFolder
    global DestinationFolder
    set theWatchedFolder to choose folder
    set theDestinationFolder to choose folder
    on idle
        tell application "Finder"
            set theDetectedItems to every item of theWatchedFolder
            repeat with aDetectedItem in theDetectedItems
                move aDetectedItem to the theDestinationFolder
            end repeat
        end tell
        if theDetectedItems ≠ {} then
            activate
            display dialog "Files for cutout were detected and moved to your " & theDestinationFolder
            tell application "Microsoft Outlook"
                set m to make new outgoing message with properties {subject:"Files For Cutout Received", content:"Hello there:
                Files for cutout received"}
                tell m
                    make new recipient with properties {email address:{name:"KK", address:"[email protected]"}}
                end tell
                send m
            end tell
        end if
        return 1
    end idle

    Hi H:
    Thanks for your help.
    I opted the Option 1 from your script. When a file arrives in Watch Folder, the script still copies to the destination folder (instead of move) and sends email successfully, and this task repeats continuously. The script is as follows:
    global theWatchedFolder
    global theDestinationFolder
    set theWatchedFolder to choose folder
    set theDestinationFolder to choose folder
    on idle
              tell application "Finder"
                        set theDetectedItems to every item of theWatchedFolder
                        repeat with aDetectedItem in theDetectedItems
                                  set a to aDetectedItem as alias
                                  set b to (move a to theDestinationFolder with replacing) as alias
                                  if a ≠ b then
                                            tell current application
                                                      do shell script "rm -rf " & POSIX path of theWatchedFolder
                                            end tell
                                  end if
                        end repeat
              end tell
              if theDetectedItems ≠ {} then
      activate
                        display dialog "Files for cutout were detected and moved to => " & theDestinationFolder
                        tell application "Microsoft Outlook"
                                  set m to make new outgoing message with properties {subject:"Files For Cutout Received", content:"Hello there: Files for cutout received"}
                                  tell m
      make new recipient with properties {email address:{name:"KK", address:"[email protected]"}}
                                  end tell
      --open m
                                  send m
                        end tell
              end if
              return 1
    end idle

  • Mail + Exchange 2007 + Move message doesn't work

    I have my Apple mail program setup to use my work Exchange account and for the most part it works great. However, when I try to move mail from my Inbox to a subfolder, it fails. I've tried dragging the mail to the folder and I've tried going through the right click menu. I've also tried different folders and different pieces of mail with the same result. I can move messages with my iPhone and with my work PCs Outlook client. Lastly, I've checked the main network ports on the Exchange server to verify that my communications with the server are not being blocked. Any ideas on how to fix this?

    I've been looking at a lot of the posts concerning this issue and I am posting my console messages to each of them. This is the console message I get when trying to delete a message:
    9/16/09 2:45:03 PM Mail[540] * Assertion failure in -[EWSCopyItemsResponseOperation executeOperation], /SourceCache/Message/Message-1076.1/MessageStores.subproj/EWSCopyItemsResponseO peration.m:44
    Copying an EWS message returned success, but didn't have 1 item in the response message, got 0 items; most likely one of the Exchange Server components is not running Service Pack 1 Update Rollup 4
    0 Message 0x00007fff80498828 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
    1 Message 0x00007fff8049878d -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
    2 Message 0x00007fff803de753 -[EWSCopyItemsResponseOperation executeOperation] + 519
    3 Message 0x00007fff804a6a57 -[MonitoredOperation main] + 229
    4 Foundation 0x00007fff8614411a -[__NSOperationInternal start] + 673
    5 Foundation 0x00007fff86143dd8 ___startOperations_block_invoke2 + 99
    6 libSystem.B.dylib 0x00007fff83f5ecf6 dispatch_call_block_andrelease + 15
    7 libSystem.B.dylib 0x00007fff83f3d1e9 dispatch_workerthread2 + 231
    8 libSystem.B.dylib 0x00007fff83f3cb28 pthreadwqthread + 353
    9 libSystem.B.dylib 0x00007fff83f3c9c5 start_wqthread + 13
    )

  • Movie Creator doesn't work after install

    I know many people are having this issue.  Installed Movie Creator from the Update Center app but when you open it the program just sits there on the main intro screen and you can't do anything with it.  Have uninstalled, reinstalled, cleared cache nothing will work.  This issue is present on my Z2 and Z Ultra, both running latest completely stock firmware from Sony.  Has anyone found a way to fix this?  

    I can see that you're missing some dots in the lower part of the app (indicating next steps).
    have you tried to swipe to the right and check if you can move on to the next step even if its not indicated in the app?
    Do you have several photos taken during the same period of time? If not do a test by taking several pictures and check if the movie application can find them and suggest a movie compilation for you.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Exporting Movie Suddenly Doesn't Work

    I've been working on a short video project. I exported several takes as .m4v and .3gp (based on size options) yesterday. The video project has both video, photo, music and text.
    1. Today, on export, the export (same formats .m4v and .3gp) has only the audio and no video.
    2. I closed iMovie and on re-start, iMovie said I was missing support for Quartz Extreme
    3. I checked System Profiler, and indeed, under Graphic/Display it said Quartz Extreme was unsupported.
    4. I ran software update, including an update for iWork 09'
    5. Restart computer, iMovie now opens
    6. Try to export the video to .m4v --> Same fail - no video
    7. Try to export using QuickTime --> Success
    What's the deal?

    [Moved to CS4 and Earlier.]

  • Completed Project Doesn't work When Deployed FilePermission Error

    Hello all,
    I have been slaving away over an applet for the past several weeks, and I have finally gotten it finished. When I tried to upload it to MY web server, it suddenly stopped working. The applet itself reads files from the directory in which it is run, and apparently even when these files are given a 777 permission, the applet still can't read them. I'm baffled as to what's going on.
    For the HTML code, I am using
    <applet code="tempGraph.class" codebase="http://www.michaeljaylissner.com/archive/java/" height=400 width=750>Java Applet</applet>
    The page hosting the applet is here: www.michaeljaylissner.com/pct-temperatures.
    The code for the applet and the data files themselves are here:www.michaeljaylissner.com/archive/java/.
    Any help would be greatly appreciated. I was so happy to have the coding done, I just assumed that putting the thing in a website would be easy. WRONG!!
    The error the java console is giving me is: Exception in thread "AWT-EventQueue-2" java.security.AccessControlException: access denied (java.io.FilePermission iButtonResults-MattChurch-2.csv read)
    I can't imagine how to fix this problem!

    Hmm, are you doing something like this to load the file?
            timingProps = new Properties();
            InputStream pis = this.getClass().getResourceAsStream("/timing.properties");
            if (pis != null) {
                try {
                    timingProps.load(pis);
                catch (IOException x) {
                    CCLogger.getLogger().log(Level.SEVERE, "Unable to load the timing.properties configuration file! " + x.getMessage());
                finally {
                    try {
                        pis.close();
                    catch (IOException x) {/* do nothing */}
                CCLogger.getLogger().log(Level.INFO, "Timing properties have been loaded.");
            } else {
                CCLogger.getLogger().log(Level.SEVERE, "Unable to load the timing.properties configuration file!");
            }I think you are right that you shouldn't have to sign the applet if the file is coming from the same web server the applet is deployed on.

  • Import movies itunes doesn't work

    How come i can't import my homemovies to iTunes. I have trien import from the menybar and drag them into iTunes, but nothing happens and no message.

    What format are the movies? Are they a format that iTunes can accept?
    http://support.apple.com/kb/HT2729

  • Movie dowload doesn't work

    Hi
    Impossible to download a movie (rental); it stop downloading and I've been trying for 45 minutes
    can anyone help ?

    Hello Babparis,
    It sounds like your movie rental download stopped, and you were not able to continue downloading it. I found an article with steps to take when this happens. 
    I recommend following the steps under the section titled "If your download was interrupted on your computer" and then continuing with the steps under "Additional Information" if necessary in the following article:
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    Thank you for posting in the apple Support Communities. 
    Best,
    Sheila M.

  • PSE 12 organizer crashes continually after movie project in Premiere 12

    I have PSE 12 both organizer and Premiere. I've completed a movie project after first working up a slide show in Organizer but when I tried to burn my dvd the program did not recognize my burner (which is LG's HL-DT-ST GH24NS50 SC SI) so I burned to a folder. Then tried to burn with both Windows DVD maker and Wondershare Video burner neither of which recognised the files containing the movie titles & scene intro-s. A 2nd problem has also developed during the process of completing the project. My PSE organiser now crashes as soon as it loads the media so I'm now virtually locked out of my photos. The only new files added to the organizer since I started this project are those coming from Premiere ie narrations etc.Can anyone suggest a way to fix these problems. Thanks

    Thank you for your response. I've downloaded Image Burn but haven't yet had the opportunity to try it out. I'll try it out tomorrow along with an attempt to get Premiere to recognize my drive which again is fast and up to date.
    My computer is a Windows 7 64 bit machine with 8 GB RAM and loads of free disk space. I suspect my programs are still the original 12 version but I have tried to invoke any upgrades in the past. It seems they must not have worked.
    Regarding the Organiser problem, I have deleted the psa.prf file as you suggested but that failed to make any difference - the program still closes immediately after being launched. It doesn't stay open long enough for me to create a new catalog.
    Do you have any further suggestions? And thanks once again for your help so far.
    Garrysen

  • How do I reopen a previous project I was working on in imovie?  Please help

    I had to work on two imovie projects.  I began the first one and I was about half done.  I had to start the second one so I created a "new project".  I worked on the second one, but now I want to go back to the first one to finish editing.  I go to "Finder" then the "movies" folder, then "imovie projects", then I pick my first movie project I was working on.  Imovie doesn't open the first project, it just goes back to my second project, but I want to edit the first.  So, how do I open a previous project I was working on in imovie? 

    Chan17Chan wrote:
    ...  I go to "Finder" then the "movies" folder, then ...
    wrong direction ...
    in iMovie, far upper left, click on the button 'Project Library'

Maybe you are looking for