Movie recording playback artifacts with scalable output?

I've recorded a movie in Captivate 7.01 in demo mode. But I need to have the output scalable. When I publish with scalable html I get all these screen artifacts as the movie plays back. I have video compression turned off and the screen color set to 32 bit? Is there any way to fix this???
Thanks!

You need to work out what is the lowest practical resolution of your main target audience group. If most of your audience is only on 800x600 then by all means build for 800x600. However, I tend to believe that only a small minority of your users would be on such a resolution. Given that most people would be on 1024x768, I would tend to build for something around that size. The ones on 800x600 would of course be disadvantaged. You need to decide if they are a big enough user group to matter.
Whatever you decide, turning on HTML scaling is going to make everybody's output look worse.

Similar Messages

Playback artifacts with MOV files from GH3

I have successfully played and edited MOV files from GH3 on this computer, but I suddenly (End of August) started having rendering artifacts in preview, after rendering in the timeline monitor, and on export. I've tried several different MOV files with the same issue. I've uninstalled and reinstalled Quicktime. When I first open quicktime after an installation, it plays the source files cleanly. But after I run Premiere Pro, I can't get clean playback in either PP or QT. I've disabled the Nvidia Drivers for the GeForve GTX770 video card and still get the artifacts.
Any ideas about what might be going on?

Thank you so much for your reply.
Yes, I have CUDA installed. I see the artifacts in the source monitor as well as the timeline monitor. I have tried exporting in several formats and the artifacts appear randomly in all outputs. I can get a clean export of the same files and projects from my laptop - HP Zbook.
Quicktime Player also displays the artifacts, but when I uninstall and reinstall Quicktime the display is clear until I try to edit again in Premiere. Then the artifacts start to appear randomly in Quicktime Player as well.
Windows 7Pro 64bit, Intel i7 3.4 Ghz processor, 16 GB Ram, Nividia GEForce GTX 770 video card.
Screengrabs:

ALSA: Recording Playback Audio with HDA-Intel

Hello,
My alsa-info. I only use analog output.
Alsamixer looks like this: http://ompldr.org/vYmE4Mw http://ompldr.org/vYmE4NA
I would like to record audio which is being played back on my computer. I need it for recording of gameplay videos. I want to use only ALSA for this and want to avoid PulseAudio, if possible.
Recording audio playing on the computer with Alsamixer tells me that I should use the "Mix" control of the Capture device. However, HDA-Intel appears not to provide such a control.
Does anyone know how I can create such control? Or perhaps I can somehow fake a capture device, that in fact simply plays back the hw:0,0 playback device?
Perhaps the snd-aloop module is a solution.
I will now start reading about .asoundrc files but wanted to leave this question here, because I feel that I'm likely to fail in my search for knowledge.
Cheers

I can't see a straightforward way to configure icecast to do this on the Arch Wiki.
I tried alsaloop, but it blocks devices when in use. Maybe I'm doing it wrong.
alsaloop -C hw:0,0 -P hw:0,0 -t 10000
I'm not the first to have this problem (thread of 2010-05-22)
I managed to get play-to-file working but ffmpeg doesn't seem to be able to handle the raw output and I'd have to make "default" play to file, as most games don't allow to set what alsa device to use for sound.

Cannot record/playback script with certificate in OpenScript.

Hi all,
We are trying to record a simple load testing login script with a certificate, in OpenScript.
But Internet Explorer just "hangs" for a long time where the certificate selection dialog is supposed to show up, then the message "Content-Length: 0 Connection: Keep-Alive" is shown in the browser.
It doesn't work as an OpneScript functional test either. We can record the functional script, but at playback it fails to select a certificate in the "choose a digital certificate" dialog and eventually gets a timeout.
Anyone having this problem?
Axel

Hi,
I can't post the information here but might be able to send them on mail if needed.
Addition: We can not make a simple HTTPS login-script even without a client-side certificate.
Axel

Movies app playback problem with ac3 codecs..

It would be a better app if it have played videos with ac3 audio codecs..

Isn't an overkill if you don't have a home theater sound system?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

After recording a movie, the playback goes to 2X speed.

After completing a New Movie Recording in QuickTime Player 10.0 (114) from an old video tape, the QuickTime movie plays back at 2x speed without being asked to do so. Any ideas on how to get the playback to slow down to 1x? Thanks.
Message was edited by: DennisDS

Look carefully in your project for an audio clip or voiceover with a "spin" icon or a yellow triangle with exclamation point like this:
Delete that clip.

Downloading a recording with the "output/recording.zip?download=zip" URL...

I wanted to know if anyone else has had issues with downloading recordings with this extention lately. I’m having a problem downloading our recordings as a zip. I’m sending you the screen shot of the recording playback after having used the zip option (http://lacoe.adobeconnect.com/p61oik8wy0m/output/2011welcome.zip?download=zip). Everything from the recording shows up fine except for the content that was in the main share pod. This pod contained the PPTs and images that were used during the presentation.
Everything showed up fine when I tried the “Make Offline” option. Though this was the case, I don’t wish to use this method because 1) its painfully slow and 2) the resulting recording (.flv) is of very poor quality.

When you download the files with that query string it pulls down the files Connect uses to recreate the meeting. Since Connect doesn't record the session in a traditional video file, you don't get everything in that zip file. If you look in the XML you will see that it calls to the content on the server (http: //lacoe.adobeconnect.com/pjan30ng0 for example). This is how Connect keeps the interactivity of the content and makes it play like you are in the live session (less the chat function).
The shot you have above is indicitive of a recording that you moved to a different Connect account, so the call to the content is now a broken link, and that is why it never resolves. When you do an offline version you are making a video file of the recording and thus don't need to call to the content.

Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

Hi and Welcome to the Forums!
From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
Good luck and let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why do movies recorded with my IPhone 4S take so long to buffer on the ATV 3 with AirPlay. 1080P movies from iTunes stream instantly.

I have a third generation apple TV and it works great with renting movies and streaming from my computer's library. However, it is extremely slow uploading movies recorded on my Iphone 4S. It doesn't matter if my Iphone 4s movie is streaming from my computer's library or directly from my phone it takes several minutes to buffer just a 1 minute video clip. Is anyone else having this same issues?

Clandherr, I'm having the same issue. Streaming a 1:43 video I recorded from my Iphone 4S took 10 minutes to Airplay onto my Apple TV 3G. I've also experienced lag when it comes to YouTube and Vevo videos. I've checked my Network Configuration on my Apple TV and I've got a great signal and I'm using the Apple Extreme as a wireless router with 5Mhz speed. My internet speed is super fast as well. Not sure what the heck is going on.

Does anyone know how movies recorded with torrents convert such a way that would see them through Apple TV. Thanks in advance.

Friends! Does anyone as movies recorded with torrents broadcast via apple TV. In iTunes, they are not all copied. Maybe they can somehow transform or there is a way to bypass iTunes broadcast on TV. They are viewed on a computer in vlc player.

Ann154,
You were correct again. I deleted everything I had done to date and re-did the entire SMS backup of my 28 message conversation again and YES I was able to open it using IE-8. It looks great and it prints great and life is good! I am going to go make a donation.
Thanks again for the help. I marked this thread as answered by you.
JerryF

Move records within output node

Hi,
What are various methods available to move records within output node/table ?
Thanka,
Namrata

Hi,
You can copy attribute by attributes.
On the other hand, if they are the same node, you can use the CopyElements method of WDCopyService, which will copy elements of one node to another node.

How to convert Sony camcorder 1080i AIC .mov files to work with Photos app?

I have a Sony SDR-HD10 camcorder from 2008. It records in 1080i format, and I exported to .mov using the Apple Intermediate Codec, Linear PCM, Timecode format, 1920x1080; Color Profile HD (1-1-1); 2 channel audio.
I have 121 files totaling 105GB. These files all play fine in iMovie. BUT - when I open them in Quicktime X for Yosemite, it converts them into a file that is about twice the space on the drive. The resulting file is Apple ProRes 422, Linear PCM, Timecode, 1888x1062. It also resets the created and edited date/time.
I looked at each video and the resulting quality is about the same.
How can I convert these files into something that Photos will like, but not double in size?
Also, I should point out that I'm not certain I should be using Photos for movies. I used to use iPhoto for pictures, and iMovie for movies, but hardly ever cared to edit videos and thought iMovie was too bulky and confusing for general playback. With Photos, it will upload everything to the cloud (and I'm paying for it), so i can use Photos as my canonical source for all movies and pictures. I have iTunes Match, and my email is hosted by Google, so I'm getting closer to having everything in the cloud. so far, i haven't gone all in with Dropbox for documents, probably because I'm too paranoid about corruption on a remote device like that if there is any concurrent access.

Check out the export settings from iMovie. Your exporting in a very high grade format used for editing, you want a delivery format. Ask on the iMovie forum for more.

Cant view movies recorded on new iPhone iOS

updated iPhone 4S to latest version of iOS. Since then movies recorded on the iphone won't display on Quicktime Pro for Windows XP (black screen, video tracking needle moves normally, and sound plays back, but no video. . Removed QT Pro, then downloaded and reinstalled QT Pro from scratch on the Win XP pc. No success. Old movies recorded under previous iPhone iOS still play fine - only new movies have the video blackout. Same video files playback normally with opther applications on the Win XP pc (Div

Your topic is misleading. According to your post, you are not having issues viewing videos on your iPod. The problem is viewing the videos on your desktop using Quicktime. You will be better off posting in the QuickTime for Windows forum.

How to disable the audio track in QT Pro Movie Recording

I have a device that allows me to record DVI video (1900x1200 uncompressed) into QuickTime Pro through the Movie Recording function. It all works very well except I am trying to record video only (it's the video output of a medical device, so there is no sound). In QT pro preferences, the choices for audio input are "automatic", built-in microphone", or "line-in". I need the choice of "none" (at these files sizes I need all of the CPU's resources working on the video to improve continuity and frame rate). Does anyone know of a script to disable the audio recording portion, or how I might write one? I have never written script before, but that won't stop me from trying to learn how (or rather, launching into a prolonged period of trial and error).
I am also going to approach this by nagging the video device manufacturer, but they are more Windows- centric (they do support Mac OS X and some Linux platform so all hope is not lost). However, it would be easier if I could have more control over my own destiny, and Mac folk seem to be much more helpful.
Thanks in advance to anyone who may be able to help.

First, thanks for the quick reply.
Setting the audio option to line-in with nothing plugged in yields the same results. The device (which is essentially a continuous frame grabber) doesn't have any audio feed at all, and I think that is what is confusing QuickTime. The file I record generates one video track and several sequential audio tracks that start at roughly every 4 seconds. The movie info say that these are Big Endian Stereo L&R tracks, and that have virtually no file size to speak of. Audibly there is nothing. However, the constant "start over" with the audio is causing 2-3 second skips in the video. When the video is recording contiguously, the frame rates are on the order of 15 to 20 fps, which at 1900x1200 is fantastic for what I am doing (software training video of a Linux-based medical device; nothing cool like Snapz available for this beast).
By the way, I have tried Hack TV Carbon, hTV 0.2 and QT Broadcaster, all which will recognize the device as an input source, but not choose it. These would let me deselect the audio input. As mentioned, I am prodding the device manufacturer for help, too, so maybe they will come up with something to address this.
The other thing is that this device creates a video stream that is transferred by USB2. If it was a Firewire device, I would be all over this with iMovie HD or a HD Video recorder, and just be done with it. Apple may have to come up with some universal driver to accept USB video in since they have dropped FW on some of the new models, but this frame grabber isn't on the list as of now.
No real solution I can find to convert USB to Firewire.
Anyway, I am hoping that somehow I could get into the QT script and just disable the audio recording, like the old "save as Un-editable" script would pullout the "save" function of the QuickTime action.
Of course, dumping the audio tracks after the fact doesn't fix the video; once it's chopped up coming in...
I suspect that the real answer to this issue lies with the frame grabber manufacturer. But, I am still hopeful that the QuickTime Script writers out there (or the Terminal folks) may have something up their sleeves.
Thanks for noticin' me.

Can I edit footage recorded in 1080p24 with 5.1ch surround audio using Premiere Elements 12? I'm only seeing stereo audio...

Hi all,
Quick one - I've recorded footage using a Sony HDR-PJ810 in 1080p24 with 5.1ch surround audio (currently experimenting with different frame rates, resolutions and audio). If I import this into a 1080p24 preset in Premiere Elements 12 then I see only stereo audio with no obvious way to add a 5.1 channel.
If I import this into a 5.1ch surround preset (like 1080i 30 5.1) then I can see the audio across 6 channels but it's obviously having to unevenly spread 24 frames across 30 spaces in order to match the frame rates (skipping some of the slots which I suspect will cause playback artifacts).
Is there any way to get a 5.1ch surround audio track within a 1080p24 project? (I don't see it as a preset). Thanks!

OraAmator
What computer operating system is your Premiere Elements 12 running on?
The answer is to create a 1080p24 5.1 Channel project preset.
Please see my work on the approach to doing this and related information. If necessary, I will write instructions specific to 1080p24 5.1 channel
ATR Premiere Elements Troubleshooting: PE11: Exporting a 1080p50 or 1080p60 file with 5.1 Channel Audio
ATR Premiere Elements Troubleshooting: PE11: Exporting a 1080p25 or 1080p30 file with 5.1 Channel Audio
ATR Premiere Elements Troubleshooting: PE12: Exporting a 720p50 or 720p60 file with 5.1 Channel Audio
Are you in a NTSC or PAL area? Reason for that question will be mentioned later.
ATR

Movie recording playback artifacts with scalable output?

Similar Messages

Maybe you are looking for