Movie requesting log in on safari

Though this question has been asked before on the forums, I haven’t found an answer.
This is an issue concerning the safari browser on macintosh and password protected
directories.
When using a password protected directory and viewing a page on safai, the user is prompted to log in for the page,
following that the movie <video src="whatever.mov" autoplay></video> on the page requests the same log in with this message:
"To view this movie, you need to log in to area…"
If you log in again the movie will play; It will not otherwise.
I supply an example:
Here is a test url on my domain: http://zenitrama.com/safari/
u: safari
p: video
The browser prompts for the user to log in.
Then the movie on the page (html 5 video tag) prompts the user to log in again with this
message: "To view this movie, you need to log in to area 'safari' on
zenitrama.com"
You'll note that the unprotected directory: http://zenitrama.com/safari_free/, runs
without a problem.
Any suggestions would be appreciated.
thanks,
zenofromflushing

Did you ever find a fix for this - I'm having the same problem with direct .mov links held as screeners for clients on my server. What's worse, is that the second login window pops up BEHIND the Safari browser window, so you don't even know to look for it.
The only solution I've found is to add the login to your keychain, then Always Allow QT to access the keychain - terribly frustrating to have to convey those instructions on a client by client basis, especially when every other browser only requires one login.

Similar Messages

Mailbox move requests remain in Queued status

My server is part of a two member DAG. DAG shows to be healthy. I have turned logging up to Expert level but no useful data is generated (only shows that the move request was created; no problems are indicated)
Server is Exchange 2010 SP 3

Hi,
Please check the database copy status under management tab on source database and target database. This can be that one or more of those databases you are moving mailboxes to has a failed or suspended copy and its failing the DataMoveReplicationConstraint
check.
Refer to this blog about Exchange 2010 Mailbox Moves and Mailbox Resiliency
http://blogs.technet.com/b/exchange/archive/2011/05/06/exchange-2010-mailbox-moves-and-mailbox-resiliency.aspx
In addition, please check the event log on the Client Access server running the instance of the Microsoft Exchange Mailbox Replication service that's processing the failed move request.
Best Regards.

New mailbox move request Exchange 2010 : queued

I have deployed new Exchange 2010 server in Exchange 2003 Organization. It is simple setup one Exchange 2003 and New Exchange 2010.
I was trying to move mailbox from Exchange 2003 to 2010 and it has status of QUEUE “indefinetly”.. I have tried several mailboxes and result is the same.
Then I decided to create new database on Exchange 2010 sever. I have crate new mailbox on Exchange 2010 sever, send and receive some emails. And then try to move mailbox to new database. Same results.
I run test MSR replication and is ok.
I have increase msr LOGGING TO Maximum, no errors. I have rebooted server several times, no differences…

Hi,
Based on the description, status of mailbox move request from Exchange 2003 to Exchange 2010 is "indefinitely".
Please make sure mailbox databases in Exchange 2010 and Exchange 2003 are mounted.
Have you moved mailbox using the New-MoveRequest with the BadItemLimit and the AcceptLargeDataLoss parameters? If not, it's worth to do it again. Before you create a new move request, please check if there is any previous move request. If there is, please
clear the previous move request and then move the mailbox.
If the issue persists, please try to move mailbox to another database in Exchange 2003 and then move to Exchange 2010 to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Local move requests stuck with status "queued" at 0% completion

Hello all,
I'm running Exchange server 2010 SP3 with no aditonal RU.
Suddenly we are unable to perform local move requests of mailboxes between databases.
The requests will turn up in the list at Recipient "Configuration\Move Requests" but remain the with status Queued with 0% completion.
It does not matter if the move request is initiated by EMC of the Shell.
I cant find a solution so if someone has some advise that would be great,
I tried the following:
- Restarted the Mailbox Replication service on the CAS server
- Rebooted the Mailbox, CAS and Edge server
- Run a Test-MRSHealth check against the CAS
- Checked all logs but there are no related entries
- Checked my admin account permissions
- Checked if it is related to certain mailboxes and source and destination databases which isn't the case
What else can I do or check?
Kind regards,
Alex

Hi,
You mentioned you checked the event log, but there was no related events.
Have you tried to use the get-moverequest | get-moverequeststatistics cmdlet to check result?
If no, please run this command to see if there is any clues that can be used to narrow down this issue.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Each time i logged on at safari it kick me off and each time i relaunch it it kicks me off again

each time i log on to safari it kicks me off,i tried to relaunch and it kicks me off again

A number of things could cause this. Some things you might try:
Power down iPad completely and restart.
Delete Numbers from the iPad and redownload.
If you've been using iCloud to sync with a Mac, then on the Mac hold down the option key in Finder and Go Library > Mobile Documents > com~apple~Numbers. Move the documents there to the Desktop (or another temporary location), give iCloud time to resync to all your devices, then move the documents back into the folder and let iCloud sync again.
SG

Issue while running a custom package:ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o

Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
Vijay

But have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein

Exchange 2013 shell mailbox move requests showing up on 2010 hub server

We're in the process of migrating from exchange 2010 to 2013. All servers are patched and up to date. We have two 2010 CASs (one for external OWA use only) and a mailbox cluster. Our exchange 2013 setup is almost a mirror with the exceptions of how the exchange
server roles have changed.
Any new-moverequest commands entered from the either of our exchange 2013 CAS servers fail to show up in the EAC/recipients/migration page.
If the local move request is done in the EAC the batch(es) show up just fine.
The more perplexing part is: while I was going through a 2010 hub (looking for a different issue) I noticed ALL the batches/mailbox moves that weren't showing up in the 2013 EAC were listed in the 2010 move request section.
I can't get any info on the moves in the 2010 console (because they're 2013 jobs) but i can get statistics and such from a 2013 shell.
any ideas?

Are you running ex2013SP1 CU6? Can you try to update n check?
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

!!! WARNING !!! -- libgcc_s-2.3.2-stub.so , when open CM request log/output

Patch 12415211 was applied to one of two web/form nodes in out EBS R12.1.2 environment long time ago, by using OPatch I believe.
I do not know that since the previous apps DBA left the company, and just followed Doc ID 761566.1 to apply patch 12415211 to the two nodes by using manual copy steps. Now. when I start all services on the node that had it applied before, I can not open the Request log and output html page. It gives below message. But, when we only use one node that did not have the patch applied before, all works fine. THe message is
!! WARNING !!! --> libgcc_s-2.3.2-stub.so
This is a stub library which can be used for linking only. It must *not* be used as a runtime library. Please make sure this library is not found in LD_LIBRARY_PATH
How can I fix the problem? I run sqlplus and start services without problem.
Thank you.

Hi,
have you done the relink after performing above steps as mentioned in the Doc ID 761566.1 (Update AS 10g (10.1.2 and 10.1.3) Oracle Homes (Oracle Linux 6 and RHEL 6 only)) ?
If not, can you please try to relink and retest.
-Kj

Using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV

using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?

3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

Problem clearing a move request

Hi,
I've got a simple Exchange 2010 setup running along a 2007 insallations.
I have 2 DC's both running 2008 but not R2.
My issue is, I have moved a couple of users using the local move request. One of them I delete the move request as soon as it had been completed (the icon changed back to the one without the little green arrow), but the other gives me an error message of
Microsoft Exchange Error
Action 'Clear Move Request' could not be performed on object 'Enid Dalton'.
A User
Failed
Error:
Couldn't find a move request that corresponds to the specified identity 'home.local/Top Level/2nd Level A/A User.
The user exists and has not been moved within the OU structure.
In a real world situation, this would then stop me from moving the user again. Obviously this doesn't happen every day, but a user could move offices for a short period of time and wish to move the mailbox to a local server.
Any idea's ?
Thanks in advance
Phil
Remember : Experience is something you don't get until just after you need it.

When migrating from 2007 or 2010 to 2013 Exchange, if the account was deleted before the move request was cleared, or it was put into a different OU, you can force clear the move request as follows:
Get-MailboxDatabase|%{Get-MoveRequestStatistics-MoveRequestQueue
$_.Name}
|SortPercentComplete|MailboxIdentity,ExchangeGuid,RequestQueue,StatusDetail
Remove-MoveRequest-MailboxGuid
$MbxGuid-MoveRequestQueue
$MoveReQ-Verbose

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 56945
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 59505   StoreEc: 0x3F2
    Lid: 52465   StoreEc: 0x3F2
    Lid: 60065
    Lid: 33777   StoreEc: 0x3F2
    Lid: 59805
    Lid: 52209   StoreEc: 0x3F2
    Lid: 19778
    Lid: 27970   StoreEc: 0x3F2
    Lid: 17730
    Lid: 25922   StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
    + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

Move IIS Log files to AWS S3 Bucket...

I'm seeking to automate a process that will copy or move IIS logs to a remote location.
The following variables must be taken into account =
1. Copy or Move all IIS logs (xcopy?) to another location. (Each server maintains several websites)
2. Delete the existing log files up to the current day log file from each website/ server (free up disk space)
3. I need to retain the last 2 current days of logs per site / per server.
4.I'd like to be able to schedule this task per server.
5. This will be performed on several IIS web servers.
6. The logs will need to move into their respective folders within the remote location or as part of the process create a new folder name, confirm the copy/move of the logs and location.
7. I don't have to worry about retaining actual website paths from the servers as long as the log files are in the folders names which are labeled by //server name / website (W3SVC1, W3SVC4, W3SVC5, etc...)
8. End goal - scheduling an automated task that moves these logs into an AWS S3 location (amazon Storage bucket).
Thank you.
LRod

Hi,
Okay, so what's your question? All I see up there is a list of requirements (note that we don't write
scripts on demand here).
My initial recommendation will be to look into using robocopy as a starting point:
http://ss64.com/nt/robocopy.html
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Move request stuck

Hi
I have a user where I removed the failed moverequest. If I take a look at the user at the on-premise EMC he still has the little Move Request ICON. I can not move him again now.
I tried to create a migration batch from Office 365, but that was "stalledduetomailboxlock"
Then I stopped the batch, but now that is in "Stopping"
How can it go this bad - and what can I do to clear everything?
BR
Steen

Run Get-MoveRequest in Online PowerShell. Run the same cmdlet in the Exchange Management Shell. Make sure that there is no move request for the user in either side. If there is, delete it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How to remove failed mailbox move request

Hi all,
Exchange 2010 SP1
i canceled or move failed on several mailboxes. How can I move these mailboxes again since
they still have move request checked?
Thank you.

Hi JaneHHH,
Here are some examples:
To just remove the failed moverequests in EMS, RUN Get-Moverequest -MoveStatus Failed | remove-moverequest
Move all moverequests in EMS, RUN get-moverequest | remove-moverequest
You can of course also remove them in EMC, but a simple right-click the once you want to move in EMC|Recipient Configuration|Move Requests and choose "Clear Move Requests"
:Martina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

What is this log error for Safari ? unlink of file /Users/.../Library/Caches/com.apple.Safari/fsCachedData/failed.

What is this log error for Safari ? Why am I getting this ?
2014-04-05 5:26:13.688 PM Safari[5407]: unlink of file /Users/georgestamatis/Library/Caches/com.apple.Safari/fsCachedData/8A9936E7-E9A E-400D-A5D7-DCF074F115FC failed. Errno=2

I have this report is this helps you find the error:
System Version: OS X 10.9.2 (13C64)
Kernel Version: Darwin 13.1.0
Boot Mode: Normal
Model: MacBookPro9,2
Battery cycles: 519
Kernel messages
   Apr 3 12:25:33   MacAuthEvent en1 Auth result for: 00:24:6c:46:bb:90 Auth timed out
   --- last message repeated 3 times ---
   Apr 3 13:47:09   [BNBMouseDevice][handleStart] staticPrepControlChannelAction returned error e00002c0
   Apr 3 13:47:10   [BNBMouseDevice][prepInterruptChannelWL][04-0c-ce-2b-d7-d2] _interruptChannel->waitForChannelState returned error 0xe00002c0
   Apr 3 13:47:10   [BNBMouseDevice][interruptChannelOpeningWL] prepInterruptChannelWL returned error e00002c0
   Apr 3 16:14:45   process com.apple.WebKit[1437] thread 806808 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
   Apr 3 16:17:43   [IOBluetoothHCIController][EnqueueRequestForController] -- SendHCIRequestToTransport failed, error (0xE00002D8) -- kIOReturnNotReady
   Apr 3 16:17:43   [SendHCIRequestFormatted] ### ERROR: EnqueueRequestForController failed (err=0xe00002d8 (kIOReturnNotReady)) for opCode 0x0c3f (Set AFH Host Channel Classification)
   Apr 4 08:23:48   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (dc2,620)->(dc3,c28).
   Apr 5 10:53:48   MacAuthEvent en1 Auth result for: 60:33:4b:e0:25:42 Auth timed out
   Apr 5 11:58:28   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (28c1,62c)->(28c2,c30).
   Apr 5 13:22:16   Sound assertion in AppleHDAFunctionGroup at line 1042
   Apr 5 14:12:31   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2066,5e8)->(2067,c18).
   Apr 5 14:12:32   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2068,60c)->(2069,80c).
   Apr 5 15:48:39   [IOBluetoothHCIController][EnqueueRequestForController] -- SendHCIRequestToTransport failed, error (0xE00002D8) -- kIOReturnNotReady
   Apr 5 15:48:39   [SendHCIRequestFormatted] ### ERROR: EnqueueRequestForController failed (err=0xe00002d8 (kIOReturnNotReady)) for opCode 0x0c3f (Set AFH Host Channel Classification)
   Apr 5 17:28:56   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b8
   Apr 5 17:57:20   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b0
   Apr 5 17:58:03   wl0: Roamed or switched channel, reason #8, bssid d8:c7:c8:e8:55:b0
   Apr 5 18:01:52   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b8
Loaded extrinsic kernel extensions
   com.globaldelight.driver.BoomDevice (1.1)
Extrinsic daemons
   com.anchorfree.ajaxserver
   com.adobe.fpsaud
Extrinsic agents
   2BUA8C4S2C.com.agilebits.onepassword-osx-helper
   com.google.keystone.user.agent
launchd items
   /Library/LaunchDaemons/com.adobe.fpsaud.plist
             (com.adobe.fpsaud)
   /Library/LaunchDaemons/com.anchorfree.ajaxserver.plist
             (com.anchorfree.ajaxserver)
   Library/LaunchAgents/com.google.keystone.agent.plist
             (com.google.keystone.user.agent)
Extrinsic loadable bundles
   /System/Library/Extensions/BoomDevice.kext
             (com.globaldelight.driver.BoomDevice)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
Netmask: 255.255.0.0
Application check
   com.google.GoogleDrive
User login items
   Boom
   iTunesHelper
   Dropbox
   TextExpander
Safari extensions
   1Password (beta)
Desktop file count: 40
Elapsed time (s): 469

Movie requesting log in on safari

Similar Messages

Maybe you are looking for