Movie skips/freezes periodically after burned using Disk Utility

I am trying to make copies of some home movies from the original DVD using Apple's Disk Utility. First, I created the master .cdr image and have burned several DVDs with inconsistent results.
I am using 8x Taiyo Yuden DVD-Rs and burning at 4x or 2x speed using the internal Superdrive. Sometimes the burned DVD will skip or freeze periodically, sometimes it will work fine.
I need to resolve this issue so that I can have consistent quality burns. Any suggestions?

I had this problem a year or two ago.
I don't think the built in imac DVD read /write drives are up to the task.
For quick reliable results:
Toast Titanium 8 and a Sony External Rewritable Drive.
The sony is a noisy brute but its fast and reliable.
I've burnt 100's of Taiyo Yuden DVD-Rs and had very few failures.

Similar Messages

After Burning options:: Disk Utility and Using Finder

I have a Burning Question.
When burning from the Finder, the dialog box I get doesn't have the same options and the dialog box when using Disk Utility. Is this normal? Is there a way to have the options available in the Finder dialog box?? It would be convenient to have the Finder eject the disk after burning, but I can't seem to find a way to turn on that option.
Screen shot using Disk Utility::
Screen shot using the Finder::
Am I missing something? I can't find anything in Preferences to adjust the After Burning options while using the Finder to burn.
Can someone shed some light on this?? Thank you.

Are you saying then that the dialog boxes I get are normal (as shown in my screen shots)? And, those options are not available using the Finder? There is no way to change the preferences for the Finder burning method?
So, whatever options you have set in Disk Utility with carry over to the Finder automatically?
Also, I noticed there is no way to set these options without performing an actual burn?? I tried to change the check from Mount to Eject and it doesn't stick (I chose Cancel), so I'm guessing it only sticks if you actually burn a disc.
Correct?

IDVD image files not always burning using Disk Utility

I am using iDVD 06 to create media, from FCE .mov, and have been using the "Create DVD image file" option so that I can make quick copies for clients as needed. Recently a LOT of my gens, using Disk Utility, have been rejected as 'not verifiable' hence wasting a good disk. Some of them do get created successfully. I am currently using WINDATA DVD+R disks. Not sure if this is an iDVD problem or Disk Utility problem frankly. Have reverted back to creating multiple copies in iDVD after the initial 'slow' burn of the original. Thanks

I am currently using WINDATA DVD+R disks. Not sure if this is an iDVD problem or Disk Utility problem frankly
There is a third choice that I think is the most likely problem source - WINDATA DVD+R disks themselves.
I'm 'not big' on + media for single layer disks anyway, but if you are supplying clients with discs you burned, you really ought to use good quality media like Verbatim or Maxell.
BTW, I always recommend reducing the burn speed in Disk Utility to 4x or lower (I use 2x)
F Shippey

External harddisk became extremely slow after reformat using disk utility

hello everyone~ let me try to describe as clear as possible!
to start with, i have 2 external harddisk:
hd(A)-120G, format in Mac OS Extended (journaled), it's and old harddisk and is nearly full;
hd(B)-200G, format in MS-DOS (ie. FAT32), it's a new harddisk with plenty of space.
what i wanted to do: make both hd(A) & hd(B) read & writable in mac & windows.
so, i tried to move all files in hd(A) to hd(B), hope to reformat the hd(A) to MS-DOS. but then i found out many big files can't be moved to hd(B) at all, and then i found out there's a 4G limit to the FAT32 format.
then, i tried to format hd(B) in NTFS, hoping that it can be read & writable with the help of MacFuse in both mac & windows without file size limit. so i downloaded and installed the MacFuse in my mac and format the hd(B) in a PC with Vista. well i was a bit impatient.. so i chose quick format only. then i plugged it in my mac~ yes it's readable & writable!! but the speed was like... 2mbps.......yes, 2MB per second. i really can't stand this speed! i thought it's becoz of the NTFS format... maybe it makes the transfer speed slow in mac?
so finally... i reformat the hd(B) into Mac OS Extended (journaled) using Disk Utility in OSX. i gave up the idea to make it usable in both mac & window.. i juz want the bigger harddisk to serve as a backup storage harddisk and i'll be happy with that already. so, after the format, i started moving files from hd(A) to hd(B)...and....well... the speed remained at 2MB per second.... which means, it takes like an hour to transfer juz 2G or so... i think the speed is very strange right?? maybe i messed it up making it different formats one time and another... and i dunno what to do with it now!!
anyone...please help me?? =(

Hi aniDa, and a warm welcome to the forums!
You might try reformatting it but choose the Security Option button to Zero Data once.
Did you reboot everything?
You can also make your PCS R/W HFS+ with MacDrive ...
http://www.mediafour.com/

Multi-Session CD Burning using Disk Utility v 11.1

I am trying to burn multi-session disk images (*.dmg) to a DVD-RW disc. I am using the Disk Utility which is supposed to do this. You first create a disk image using the utility, then you burn each one to the disk using its Burn tool function. I have followed all the Help directions.
The issue is that you need to check the box "Leave disc appendable" so that multiple sessions can be burned. When I try this, this check box feature is grayed out and I can't enable it.
I have repaired the permissions and the disk, this does not fix the issue.
Any help would be appreciated...

It appears that multisession DVD's are not supported properly through DIsk Utility.
As ever, you have choices.
There is the hard way (that has the redeeming feature of being free): http://www.math.nyu.edu/aml/CDwrite.html (yes this covers DVD's too).
There is the easy way (that costs a bit of cash, although your first 20 burns are free):
http://freeridecoding.com/burnagainfs/index.html
However with a DVD-RW you can erase the disk and reuse it with Disk Utility. Just click on your DVD drive in the left hand panel of Disk Utility and follow the instructions.
Cheers,
Rodney

Burned DVD movies skip/freeze on regular DVD player

I've made a few home movies, and burned them on to DVDs. When I play them on a regular DVD player (Sony), the movie skips/freezes from time to time. I've burned the same movie on my other MacBook, and this does not happen.
Could it be that the SuperDrive on this MacBook is broken?

Hi,
I would take a look at the following:
1. Try a different brand blank DVD medium when you burn the disc. Set top players seem to be a lot more sensitive to the brand of disc than computers.
2. Burn the iDVD project to an image file. Share the image file over to another Mac and burn it there. See if you still have problems with playback.
3. If you still had problems with an image file burned on a different computer, then you know it must be something in the data format of the disc. I've experienced problems with some set top DVD playback machines that can not handle sustained high bit rate content. As far as I know, iDVD uses a relatively simple encoding strategy, and does not do much to reduce the information content of the encoded video stream. If you start with a high resolution QuickTime or DVI import, playback machines with limited disc performance might not be able to keep up.
I did some fairly superficial Google searches and looked at iDVD, and I didn't see any means of setting up the bit rate and encoding strategies that iDVD will use. Perhaps, somebody with a little more experience can comment?... A professional DVD encoding software suite will do a multi-pass encoding - once to figure out optimization and then again to render output. That sort of analysis might require an over-night run to make the disc. I have a feeling Apple avoided that in order to make iDVD more consumer friendly. It also avoids stealing market from more professional products like Final Cut.
You might be able to go into iMovie HD to edit the clips. You could send them to QuickTime, and reduce the bit rate there, then import the QuickTime clips into iDVD.
--Bill

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

Commercial
Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
Shareware or freeware
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
Disco
<http://discoapp.com/>
no longer supported, but free, simple, and runs well under SL.
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple, and runs well under SL.
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are, but runs well under SL.
Terminal Whiz Kid
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

Using disk utility to burn new image dvd's

Ok I just learned to burn DVD'd using Disk Utility and New image.
But I have come to halt in my burning with a new issue.
My issue is that I have a file that is 4.63GB. When I make a new image so that I can burn it, it increases the size of the file(Video TS) to 5.13GB. Making it to big for a 4.7GB DVD.
My question is is this normal for the new image file to increase in size, and is there a way for me to stop this from happening. Or can anyone give me any other suggestions. Please help.

Ok I have never tried that, as this is the first time it is suggested to me.
The reason i have been doing it via DU, is because this has been to only way to get it to play on
home DVD player and burn with the UDF setting. I was told to do it this way when I was trying to burn
copies of my nieces fifteens that was prof. done on a DVD.
I am trying to burn a copy of a movie so that it can be played on home dvd players. Yes I have done this before and the copies I burned via DU/new image, worked perfectly. And the ones I burned by just choosing file and burning it did not work.
So any help would be great.

Why have my Ext. USB2 HD's Failed to Mount after using Disk Utility in 10.8.1 on Retina Pro

I am having issues with USB 2.0 External Hardrives and my 15inch Retina MacBook Pro running OS 10.8.1. I was able to read write to the drives fine prior to using disk utility to erase and reformat the drives. Both drives show up in the side bar of Disk Utility, but fail to mount. Both drives Verify and Repair without issue, but still fail to mount. I have tried switching USB Ports, powering on/off, etc. I tried seeing them through terminal, but they do not show.
I first lost my Lacie 500GB HD when reformatting it with Disk Utility. I gave me an error message, but I can't remember what it said.
Thinking my drive died, I plugged in a McAlly external USB 2.0 500GB drive that originally worked fine, but then locked the entire computer completely, forcing a power button reset after 10 min of total freeze. Now that drive is unusable as well and fails to mount.
I am unable to Partition either drive because they will not mount.
Any help would be appreciated.
Thanks,
Chris

I called Apple Support after getting no usuable help through the Apple Forums. The rep felt is was a problem with the two older USB 2.0 drives compatablility with the Retina Macbook Pro's USB 3.0. He kindly offered to send me a Compatable USB 3.0 Drive, but could not offer a solution.
FYI, I tried using different cords and both USB 3.0 ports on my Retina MacBook Pro and both are self powered.
Thanks,
Chris

Burning info CD's using Disk Utility?

Ok, I've got a combo drive (a few years old, on my iBook G3). I'm trying to burn information CDs using Disk Utility. I've got the dmg in disk utility, I select it and click burn. It then asks what speed I want to burn the disk at etc etc.
So, I select the slowest setting (4x) avaible. After its been burning for about 2 minutes, it said the burn ended because it had no burn underrun protection.
What is wrong?

A little more detail info on burning a CD that is not Copy Protected.....
Copy a CD that is not Copy Protected
http://docs.info.apple.com/article.html?artnum=42724
1. Launch Disk Utility at /Applications/Utilities.
2. Insert CD that is not copy protected.
3. In the upper pane, click on the 1st lower level of the CD path...
4. go to...Image>New... and select "Image from [disk/volume name]
5. In the dialog window that appears..select or type.......
• Name • location (desktop)
• Encryption mode (disregard)
• Image Format.(select DVD/CD master)
6. Click "Save"
Note. depending on your choice of image format...
• Selecting DVD/CD NMaster... .cdr will be created
• Selecting read-only or read/write.... dmg will be created.
7. The image file will appear in the lower Pane.
Note.... To checkout the steps so far....double-clicking on the image file will result in a disk image.(when you double-click on this, the contents will be revealed.
Steps (1-7) creates a image file of the CD.
8. Select the Image file that appears in the lower left Pane.
9. Select Images>Burn or... "Burn" from the Toolbar.
10. The CD drawer will open,remove the CD that you just copyed, insert blank CD and close drawer.
11. Burn options:
• Speed: Select a speed less than Maximum
• Verify Burns: (yes)
• Eject disc.. or .. Mount on desktop
12. Click on "Burn" in lower part of dialog.(Burn will change to Append If the Cd was previously appended)
13. And thats it...you are finished.
george

How do you use disk utility to burn a bootable .iso dvd?

Anybody have a clue on how you use disk utility to burn a .iso bootable dvd disk?
I'm trying to install windows 7 rc into virtual box in OS X 10.5.7 and cannot figure out how to do this. I've already installed the windows 7 beta in virtual box and was able to make a bootable dvd disk with the .iso file on it but have no clue how I did this.
I've been searching the web but most tips are for older version of OS X.
Thanks to anybody who answers.

It's so easy, You can just burn an .iso file using DVD Creator Std instead of Disk Utility, only 3 steps to finish bur ning your .iso files:
http://www.imediacreator.com/mac-dvd-creator-standard.html#131

How do I use Disk Utility to help install Mountain Lion after many failed attempts?

I tried to install Mountain Lion from an App onto my MacBook.
First it said that my disk was damaged to i tried to repair it.
Didn't work.
Then it said I didn't have enough room to install Mountain Lion.
Then I tried to restore Lion.
Didn't work.
Then someone suggested I reset my PRAM.
Tried that, and now I am stuck.
I can't restore any of my backups from timeline.
I can't reinstall OSX because my drive is now locked.
And I don't know how to use Disk Utility to solve this problem!
Any suggestions welcome... I'm in way deeper than I understand and feel like anything I do is making this worse!

I gather that your computer is in a less than satisfactory state, so the process below will basically start you from scratch, but you shouldn't lose anything.
Okay, can you inspect the Time Machine Backups with the Finder? About two or so folders down you should start seeing your system files. Assuming all your files are present.
Important^
You probably have an installation disk that came with your macBook. Boot from that CD and install from the CD.
Run the verify disk utilites and repair utilities if necessary.
You may want to erase your disk from the CD's disk utility. This will erase your Hard Drive (make sure you do not erase your backups, as that would be very bad).
Once the installation is complete, run all system updates. Either look through your backup and find the Mountain lion installation app, or download it from the app store again.
Run the ML installtion app.
Once everything is up and running, move all files and folders you want from your TM backups and you should be good to go.

Getting medium write error on burning a disc image using Disk utility

Have a MacBrook Pro 15 inch, circa Summer 2007, using OX 10.4.11. up until recently (as in before February) have been able to burn DVD's using Toast (message Medium Writer Error). Started getting problems where the burn failed. Thought maybe it was Toast, so I tried creating an iDVD project and tried to burn the DVD using that, and it stopped in the middle as well and then spit the disk out with no error message.
, this time I tried creating a disc image, and used disk utility to burn. The process looked like it was going to work but then failed with a message that I have a medium write error.
I have no problems burning a regular data disk on my superdrive so I am thinking it's maybe a software glitch rather than hardware. . Any thoughts, as to what could be causing this problem all of a sudden. By the way, there are other users out there, who seems to be having DVD burning problems all of a sudden, but most people suggest other media. I am using the same stack of DVD-R's from before when I had no problem.

Well, I had assumed my media was ok, since I had a spindle of DVD-R's and had used many of them successfully (until now!, ha ha).
I went out this afternoon and bought another brand (Memorex) and it successfully recorded.
So hopefully this solves my problem, I had no idea it was the media since I had used several of them before.
Thanks for your help.

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

After using Disk Utility's Repair Disk Permissions, can't login when restart my macbook pro10.6.8 Snow Leopard

Here's the log of my Macbook Pro, as I'm using a chinese version,
so log can only appear as below.
Reason I try to use Disk Utility's Repair is because the finder got not respond so ofter, it happen after my unscuessful power loss issues happen at home, before I doing Disk Utility's Repair I have try to build another admin account and guest user to reslove the ifnder not respond problem and it fix......
I'm sure problem was cause after using Disk Utility's Repair tool..
Now I can turn on by using Safy mode, just can't plugin USB =(
Anyone can help for solving, thanks a lot
Disk Utility's Repair log
磁碟工具程式 as Disk Utility's Repair
2011-05-28 14:58:27 +1000: “磁碟工具程式”已啟動。
2011-05-28 14:58:45 +1000: “磁碟工具程式”已啟動。
2011-06-08 04:45:07 +1000: “磁碟工具程式”已啟動。
2011-07-07 01:21:13 +1000: “磁碟工具程式”已啟動。
2012-07-18 17:12:15 +1000: “磁碟工具程式”已啟動。
2012-07-18 17:12:34 +1000: “磁碟工具程式”已啟動。
2012-07-18 17:13:02 +1000: 正在修復“Macintosh HD”的權限
2012-07-18 17:13:10 +1000: “Library”上的權限不同，應該為 drwxrwxr-t ，它們為 drwxrwxr-x 。
2012-07-18 17:13:10 +1000: 已修復“Library”。
2012-07-18 17:13:58 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib” 。
2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib”。
2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”。
2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”。
2012-07-18 17:14:05 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:14:05 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib” 。
2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib”。
2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”。
2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”。
2012-07-18 17:14:40 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib”。
2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib”。
2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib”。
2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib”。
2012-07-18 17:15:02 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib” 。
2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib”。
2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib”。
2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib”。
2012-07-18 17:15:10 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b”。
2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib”。
2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib”。
2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib” 。
2012-07-18 17:15:20 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b”。
2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib”。
2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib”。
2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib” 。
2012-07-18 17:15:28 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ”。
2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib”。
2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib”。
2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib”。
2012-07-18 17:15:36 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ”。
2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib”。
2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib”。
2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib”。
2012-07-18 17:15:44 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:44 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib”。
2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib”。
2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib”。
2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib ”。
2012-07-18 17:17:05 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:17:05 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b”。
2012-07-18 17:17:06 +1000: 警告：SUID 檔“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent”已修改，且將不會進行修復。
2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib”。
2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib”。
2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib” 。
2012-07-18 17:17:12 +1000: “System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.dylib”上的權限不同，應該為 lrwxrwxrwx ，它們為 lrwxr-xr-x 。
2012-07-18 17:17:12 +1000: 已修復“System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.dylib ”。
2012-07-18 17:17:47 +1000: “usr/libexec/cups/backend/fax”上的權限不同，應該為 lrwx------ ，它們為 lrwxr-xr-x 。
2012-07-18 17:17:47 +1000: 已修復“usr/libexec/cups/backend/fax”。
2012-07-18 17:17:52 +1000: “Library/Application Support/Apple/ParentalControls”上的權限不同，應該為 drwxrwxr-x ，它們為 drwxr-xr-x 。
2012-07-18 17:17:52 +1000: 已修復“Library/Application Support/Apple/ParentalControls”。
2012-07-18 17:17:52 +1000: “Library/Application Support/Apple/ParentalControls/ALRHelperJobs”上的權限不同，應該為 drwxrwxr-x ，它們為 drwxr-xr-x 。
2012-07-18 17:17:52 +1000: 已修復“Library/Application Support/Apple/ParentalControls/ALRHelperJobs”。
2012-07-18 17:18:12 +1000:
2012-07-18 17:18:12 +1000: 權限修復完成
2012-07-18 17:18:12 +1000:
2012-07-18 17:18:13 +1000:
2012-07-18 22:19:33 +1000: “磁碟工具程式”已啟動。
2012-07-18 22:21:36 +1000: “磁碟工具程式”已啟動。
2012-07-18 22:22:34 +1000: “磁碟工具程式”已啟動。
2012-07-18 22:22:47 +1000: 正在製作映像檔“Macintosh HD.dmg”
2012-07-18 22:22:55 +1000: 正在準備用來製作映像檔的引擎⋯
2012-07-18 22:23:03 +1000: 正在讀取整個磁碟 (Apple_HFS : 0)⋯

I called Apple Support after getting no usuable help through the Apple Forums. The rep felt is was a problem with the two older USB 2.0 drives compatablility with the Retina Macbook Pro's USB 3.0. He kindly offered to send me a Compatable USB 3.0 Drive, but could not offer a solution.
FYI, I tried using different cords and both USB 3.0 ports on my Retina MacBook Pro and both are self powered.
Thanks,
Chris

Movie skips/freezes periodically after burned using Disk Utility

Similar Messages

Maybe you are looking for