_movie.stage.image always at 800 x 600?

Hi,
I have a movie with a stage set at, say 2000 x 2000. I want to capture the stage's image at exactly the same dimensions (2000 x 2000).
I am capturing the stage's image with the following code:
newMember = new(#bitmap)
newMember.image = _movie.stage.image
The trouble is that the stage image's dimensions are always set at 800 x 600, so it shrinks my image. I cannot seem to set the stage image dimensions to anything different.
Any ideas? Thanks.
Jason

Ha. It seems my problem was a fluke. All I had to do was save, close the authoring environment, and then reopen it. Anyway, Thanks.
Jason

Similar Messages

Thunderbolt Display output only 800 x 600!!?!?!?!

Just got the Mac Book Pro Quad Core, 15", 8 gig ram.
I'm using the display output adapter in the Tunderbolt port. It outputs and syncs to my Image Pro switcher, but the options for the display output for the external only go up to 800 x 600.
Anyone know anything about this?
My old MacBook Pro could go up to the full resolution with the same video switcher and the same mini display output adapter.

It's possible that the switcher isn't compatible. Safe to presume that without the switcher you can achieve the desired resolution?

Resolution requirement of 800 x 600

Hi,
I am trying to install my company's VPN so I can remote in...of course. However, I am getting an error stating that a minimum of 800 x 600 screen resolution is required to install the VPN (5.2)(Windows XP Pro SP3)
I have a screen resolution larger than 800 x 600 and yet I always get this error. The app creates the cisco vpn folder and drops a couple of files in it, but does not install the vpn gui exe or any other components.
I have tried every possible remedy that I can think of, and all types of screen resolutions (Windows XP Pro, SP3) with no results.
Is there a known issue out there with a fix?
Thanks for any help,
Merid

This same issue occurs when trying to install on Amazon EC2 instances (cloud computing). The installer gives the error:
"To install this product, the system must have a minimum screen resolution of 800x600"
A resolution of 1024x768 was used when this error occurred.
It appears to be that the installer is buggy when used over Remote Desktop Connection.
Others are having this problem:
http://developer.amazonwebservices.com/connect/thread.jspa?threadID=27734&tstart=0&messageID=117764
Are there any command line paramters that could be used to by pass this, or just automatically install without the user interaction?

Is Cinema 4D Lite R14 limited to 800 x 600 render resolution even after activation/registration?

I created a new Cinema 4D scene from within After Effects and discovered that I couldn't make the output resolution larger than 800 x 600. In the rende settings window I get the message:
"Image Resolution: 800 x 600 Pixel - Application license limit of 800x600 pixel"
I realized I hadn't activated/registered yet, so I completed that process but I still get the limitation.
I tried:
Closing C4D and AE, restarting, opening the original .c4d I created before I registered;
Restarting the computer, then reopening the original .c4d in After Effects;
Deleting the original .c4d and creating a new one from After Effects
I still get the output resolution limitation.
I searched for documentation about the limit but didn't find any that referred to C4D Lite, only other demo versions (which had a smaller limit).
Is that a hard limit for C4D Lite R14? Or should I keep banging my head against it?
I tried contacting Maxon from the support email form on their site, but it rejects my serial number (the form asks for the first 11 digits, which includes a hyphen. I tried with the hyphen and it was rejected, I removed the hyphen and aded the next digit to total 11 and it rejected it... it
's like they don't want to hear from me. There's also no selection for the "Lite" version of the program.)
Intel i7 4770K, Asus Maximus VI Formula mobo, 32GB RAM, Asus GTX780Ti video card (nVidia), Windows 8.1, After Effects CC 2014, Cinema 4D Lite R14.
Thanks
-Mike

You can't render larger from C4D Lite, but your AE comp (with the C4D scene) should be able to be whatever size you want. AE renders your C4D scene; you don't render from C4D.

How to get my images always order by file name, and not by time of captur, in all the folders in the library?

How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
Sorry for the poor english, but im portugues.
In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
It ´s possible?
And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in the other direction?

The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

Recording larger broswer window interactions in 800 x 600 existing project

I've created a demo that's 800 x 600 and now want to add to
it--record some interactions with a Web page which is a larger
dimension. Is there a way to record something larger and
automatically shrink it down as it records into an existing 800 x
600 project?
Thanks!

Hi Bob
You would do this by recording a new project at the larger
size. Resize to make it smaller, then import the slides from the
new project into the existing.
Hope this helps some... Rick

IdeaPad 10Se and running software requiring at least 800 x 600 grafic resolution

I have bought an IideaPad 10Se this week with the 1024 x 576 resolution. I have problems installing harwere requiring at least 800 x 600 resolution. I installed my HP writer that requires at least 800 x 600 by attaching an external screen and made only displayed on this screen during installation. That was a fine work-around for installations. Now I have installed a Canoscan 4200f scanner using the same work-arround. Unfortunately the Canoscan Toolbox programme tests the resolution everytime it starts and when it is not up to 600 in vertical resolution it refuse to start. Is there a way to fool programmes that the resolution is 600 in vertical resolution and not just 576? Or how can I solve this problem.

I had a problem installing the Cisco VPN which required at least the 800x600 resolution
to install but not to actually run the software after it was installed.
It seems you can set the resolution to 640x480 using third party software but not
any resolution with more than 576.
FWIW 1024x576 is exactly the 16:9 aspect ration as found in HD TVs.
There is software that won't install and there is software that won't run after it is installed.
I found if I plugged my spare monitor into the VGA port and then used the FN+F3
you can make the external monitor your primary one temporarily. This assumes
the external monitor supports at least 800x600 of course.
Then just install or run your software 800x600 normally.
It's a kludge for the "won't install but will run" type software.

Why did my screen size just default to 800 x 600?

Last evening I ran 'Check For Updates' and after a Adobe Reader update my screen reverted to 800 by 600. I don't write down what settings I use, I simply have been using whatever is comfortable. Now I cannot find it. I may have caused the default setting through an erroneous keystroke, but I'm not sure. How do I find the settings that I had say 24 or 36 hours ago and revert back to that screen size?
Thank you for any help!

Go into your system preferences and click on displays then make sure 1,920 x1,200 is selected.

Can you resize an existing 1024 x 768 presentation to 800 x 600?

Can you resize an existing 1024 x 768 presentation to 800 x 600?

Open the Inspector (blue i in the menu bar) and click on the Document tab in the upper left. At the bottom you can select a slide size from the drop-down menu, or specify your own size by selecting Custom...
Everything you need is in the Inspector!

Cannot deselect images ,always selects 2 images so settings are always on sync. tried control D

cannot deselect images, always selects 2 images from the folder i am in, so sync setting are always on. tried control D but then automatically selects 2 Images

This has happened to me too. I had to quit the lightroom application and restart it to fix this problem.

Do stage text always have to be layered on the top?

Hi all,
im in an Air project and i need to uses graphics, movieclips etc to be layered over the actual stage text so it will partly cover the stage text. I have not succeded yet, as stage text always are on top.
Is it a way to code special graphic elements to so they will cover stage text?

According to Stage Text documentation :
StageText - Adobe ActionScript® 3 (AS3 ) API Reference
When native inputs are used, StageText objects are not display objects and you cannot add them to the Flash display list. Instead, you display a StageText object by attaching it directly to a stage using the stage property. The StageText instance attached to a stage is displayed on top of any Flash display objects. You control the size and position of the rendering area with the viewPort property. There is no way to control depth ordering of different StageText objects. Overlapping two instances is not recommended.
So, according to current implementation, it will not be possible to overlay other Flash Display Objects over Stage text. Will update you if I come to know about some way or workaround.

I built a 800 x 600 website in Dreamweaver. I now want it 1024 x 768. Can that be done without rebuilding the website?

I built a 800 x 600 website in Dreamweaver. I now want it 1024 x 768. Can that be done without rebuilding the website?

Dave,
This is my css, what should I do?
body
.copy {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     color: #7B7979;
     text-decoration: none;
.select {
     font-family: Tahoma;
     font-size: 10px;
     line-height: 12px;
     color: #7D7D7D;
     background-color: #FFFFFF;
     height: 17px;
     width: 106px;
     border: 1px solid #CDCDCD;
.text_1 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     color: #886600;
.text_2 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 13px;
     color: #828282;
.link_1 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     color: #5C89C9;
.form_1 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     background-color: #FFFFFF;
     height: 17px;
     width: 228px;
     border-top-width: 1px;
     border-right-width: 1px;
     border-bottom-width: 1px;
     border-top-style: solid;
     border-right-style: solid;
     border-bottom-style: solid;
     border-top-color: #616161;
     border-right-color: #D4D0C8;
     border-bottom-color: #D4D0C8;
.form_2 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     background-color: #FFFFFF;
     height: 65px;
     width: 228px;
     border-top-width: 1px;
     border-right-width: 1px;
     border-bottom-width: 1px;
     border-top-style: solid;
     border-right-style: solid;
     border-bottom-style: solid;
     border-top-color: #616161;
     border-right-color: #D4D0C8;
     border-bottom-color: #D4D0C8;
     overflow:auto;

When I open (launch) ps6, two old images always open. always the same 2 images, and always when I launch the program. what is going on?

when I open (launch) ps6, two old images always open. always the same 2 images, and always when I launch the program. what is going on?

Check your userid autorecovery folder after you close Photoshop. If there are psb files in it delete them

Do anybody know how to change a PNG file from 1760 width by 1369 height to 800 x 600?

Do anybody know how to change a PNG file from 1760 width by 1369 height to 800 x 600?

Crop to 4x3 aspect ratio, then resize to 800x600

Record 1024 x 768 and resize to 800 x 600

Hi all,
Does anybody know if it possible within Captivae 5.5 to record a screen which is 1024 x 768 and later crop the recorded sheets to 800 x 600? I would like to record the full screen because of the menu's etc. but the LMS needs a 800 x 600 swf file
Hope to hear from you

Hi there,
Strange, seached for it a couple of days and after adding this issue the solutions appears. For who want to know i record on my desktop 1440 x 900 and choose for Modify >> Rescale Project to 1024 x 640. This results in a full screen video but a little smaller.

_movie.stage.image always at 800 x 600?

Similar Messages

Maybe you are looking for