Movie start points in a session

In addition to my previous post, i have a problem with Movie start points and tempo changes as well. Please correct me if i am wrong but in Logic 7 it was possible to set a movie smpte point (say 10.20.17.22) as Bar 1 of the arrangement thus meaning you could write a piece for a 2 min extract of movie without having to lay the whole movie in place and skip to the point you were writing for (after all, that is the sole point of having a SMPTE time start function). In 7, when a tempo change or curve was applied, the arrange would take the SMPTE set at bar 1 as the start of the movie and thus the movie would not slip (i.e 10.20.17.22 = bar 1 period). However, trying to achieve the same function in Logic 8 doesn't seem to work. Any tempo changes to an arrangement slips the whole movie against the time line regardless of bar 1 position, it seems that Logic is taking into account the negative bars at the start of the arrangement (i.e @120bpm bar 1 = 10.20.17.22 but @140bpm bar 1 would become a different SMPTE point in the movie). I am slightly worried by this problem as it is one of the main functions i carry out professionally. If i can't a) write to picture accurately and b)change tempo without slipping an entire movie file then the whole function seems a bit of a waste of time.

Select all songs in the list, do Get Info, look at the bottom of the window and set Remember Position to No. Say OK.

Similar Messages

Add Mouse - Cannt move start point

Captivate v5.5
A work colleague using v5.5 is unable to move the start point of the mouse pointer trail they add to a slide using Insert/Standard Object/Mouse or the insert mouse tool bar.
They can move the pointer end to place they want it to finish but unable to grab and drop the start point and place it where they want the mouse to start from.
I have tried it on my v5.5 and it works OK for me.
Any ideas please as to what she needs to do - or why this might be ?
Noel

Hi Noel,
If you are using mouse pointers in more that one slide, then the end point of the mouse pointer on the first slide, becomes the start point on the second and so on.
This is done to keep the continuation of the mouse pointer across the slides.

How do you move a track region in Garage Band to a new starting point without altering the existing length of the track?

How do you move a track region in Garage Band to a new starting point without altering the existing length of the track? Thanks.

What exactly are you trying to do? You can drag any region by grabbing it in the middle of the upper area with the highlighted name of the region. However, if you move it towards the end of the track, the length of the track will get longer, to accommodate the extra part of the region. DO you want to speed up the region, to shorten it or do you want to trim it? You can simply grab the right margin of the region and drag it, to make the region shorter.

I can't not set Poject Start Point, as described on p 151 of manual. "You can move the project start point to an earlier position" . Can anyone do this?

I'm unable to change the Project Start Point. ( I can change the end point easily)
On page 151 of the manual it states:
"You can move the project start point to an earlier position..."
I can't find a way to do it. Are other able to change it. If so, please explain the procedure.

Mmmmm,…..I just noticed this as well…….
Anyway, try this:
For the sake of this demonstration start a new project.
Click the mouse pointer on the playhead in the ruler,
now the project start indicator should appear, hover the mouse pointer above it until this indicator appears,
when you see it left click, hold and scroll to the left.
Good luck!

Set start point in movie buttons?

Is there any way to set the starting point of a movie (scene) button with any degree of accuracy? Apple's stupid sliders are about as elegant as using a twig as a screwdriver and it's driving me nuts. Moving the slider even a single pixel moves the video forward/backward 30-45 seconds, which is completely unacceptable.

I tried that, but unfortunately iDVD isn't understanding what I want to do.
Here's what I did: In iMovie, I cropped a much smaller segment of my movie (about 35 seconds), starting the crop at the point where I wanted. I exported this clip out of iMovie as a DV file (saved on my desktop). In iDVD, I went to the appropriate "scene selection" page and highlighted the button for which I wanted to set the video. I then dragged my DV file from my desktop onto the video area in the button.
What I EXPECTED to happen is, I EXPECTED the video in the button to change to the video in the file I dragged in, while clicking on that button would bring me to the appropriate chapter in my movie.
What ACTUALLY happened is iDVD created an entirely new button which, when clicked on, plays the cropped DV file that I originally created.
Dumb, dumb, dumb.

The nano won't let me move ahead or backwards listening to a lecture. It only will go to the start point. How can I move along gradually, forwards or backwards?

the nano won't let me move ahead or backwards listening to a lecture. It only will go to the start point. How can I move along gradually?

You'll want to read about the playback controls on page 21 of your iPod's User Guide, specifically the fast forward and rewind controls.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

Movie, offset start points...

I have a movie that begins at 7.20 (7 sec, 20 frames) how can I move the movie over to where 7.20 begins on beat one in logic? I'm having a tough time with this one. Thanks!

In the actual quicktime-movie float is a "Movie Start" number.....change it.
SvK

Removing or creating first tempo marker resets movie start

This is an interesting one (or not depending on your point of view):
If I have a session with multiple tempo markers and I remove the first one, whether or not it's at bar 1 or bar 21, it resets the "Movie Start" in Settings:Video...
I haven't figured out if there's a pattern to what it resets to but it's repeatable on this end at least. It does not occur if you remove any other tempo change except the first one. The project time, and all other SMPTE times on all other markers remain correct. Audio locked to a specific SMPTE point stays right where it should. When I re-enter the "Movie Start" all is restored and plays in sync.
I'm in Logic 8.0.2 running the following plugs: Omnisphere, Kontakt Player 2, PLAY, Zebra, Sound Toys, Altiverb, Waves Renaissance Maxx, Lots of EXS, and miscellaneous other NI plugs.
Video is DV format, 29.97, output through a Canopus ADVC-100. But the problem occurred even without the Canopus attached.

Thanks for the confirmation.
I posted the question over at LogicProHelp before but didn't get any response. I know it is a little bit deep to get into it but it relates to two things that are not so esoteric after all:
1) What's the deal with the first Tempo node anyway. I couldn't find any reasonable explanation about it, especially nothing about the fact that it is somehow linked to the bar entry in the Synchronization window.
2) The whole interconnection when working to video "bar-SMPTE-MovieStart-SMPTEoffset-Tempo" is very complex but a lot of Logic user deal with that every day with different levels of understanding. I 'm just surprised that that topic is not discussed more often in detail.
BTW
I can recommend the new tutorial video by Steve Horelick at MacProVideo.com about "Logic's Music -for-Picture Toolbox"
http://www.macprovideo.com/tutorial/logic9203

Can't fine tune scene icon starting point

Hello.
I have an iMovie HD project that I am finalizing in iDVD 6. It is 90 minutes long and divided into ten chapters. iDVD 6 automatically created motion icons for each of the ten chapters. For ease of editing, I have turned Motion off for now.
I can click once on each icon, and a slider appears above it that allows me to set the starting point for that icon's movie. The problem is that I can't finely select the starting point I want. Even if I move my mouse the shortest distance possible, the video jumps by about one minute increments. Same thing when I use the right or left arrows on the keyboard. I've tried variations with the shift, control, option and command keys, but nothing worked, and iDVD Help has no solution that I can find.
Is there any way that I can get the movie sliders to move in much smaller increments, preferably frame by frame? Thanks!

I never found out anything on this, so I just finished the project as best I could. Now I have Final Cut, and doubt I'll use iDVD again. Good luck!
Fred

Creating timeline space before the current start point

Ok, this is probably a simple answer, but I'm relatively new at FCP:
After review a sequence, I realize that I want to add clips BEFORE that sequence's current start point. I can do this by grabbing all the clips on the timeline and sliding them to the right, but this is cumbersome. Is there a simpler way of doing this?

INSERT editing. F9...the YELLOW option.
Or...press TTTT (T four times) and grab the clip in front of everything and it will highlight everything after it...then move it down to give you some room to work.
I find that my single most helpful tool...use it a lot.
Shane

N79: Cannot move Access Point into predefined grou...

Hi there
Hope somebody can help. I'm trying to move an access point, with the destinations feature, into the "Internet" group from the "Uncategorised" group, but when I select "Organise"->"Move to other dest." and then select "Internet" as the group I want to move the access point into, the program just shuts down, and the access point has not been moved.
To access the "Destinations" feature. Go to Menu->Tools->Settings->Connection->Destinations. As far as I have understood, it's a new feature on S60 3rd edtion FP2 phones.
I can move access points into custom groups, but not into the predefined ones, so is that a design decision or an error? And how do I get access points into one of the predefined groups if it's a design decision? I have tried to redownload settings from my provider, but that didn't help, as they just landed in the "Uncategorised" group.
Thank you in advance for any help that you may be able to provide.
Solved!
Go to Solution.

I am able to do this on my N96, which is also an S60 3rd ed. FP2 phone like the N79. Potential reasons for your inability to do this that come to mind are software bugs and operator branding (if you got your phone through an operator rather than SIM-free from an independent retailer).
We can eliminate the former by performing a few different resets on the phone.
Start by doing a restore factory default settings. Enter *#7780# from standby and supply your security code when prompted. The default is 12345. This won't delete any data of yours, it'll just clear your settings meaning that you'll have to set up your theme, ringtones etc. again, but that's all.
Secondly, try a soft reset. This will reformat your phone's central memory, so back everything up on your phone before you do this or your contacts, messages etc. will be lost. Enter *#7370# from standby and supply the security code when prompted.
If that doesn't work then you can attempt a firmware update either by FOTA or using NSU. Always follow the update up with a *#7780# since it seems to iron out many post-update problems.
If the update doesn't change anything, or if there's no update available anyway, then you can always take the phone to a Nokia Care Point to see what they have to say, but at this point it looks like operator branding is responsible for this.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Get filename from Watched folder start point

I have a watched folder as a start point and I can use the
symbols %F and %E in order to save the output documents in the Result folder.
This is easy.
What I cannot do, is getting in a string variable the same filename in order to use it within the Process:
Is it possible?
I would like to exploit this filename to discriminate the activities that the file have to make...
Thanks you as usual!

thank you Jasmin, your answer is correct and now it works!
only I don't understand why my way didn't work...
Instead of a setValue, I used directly a INSERT SQL activity with getDocAttribute(/process_data/@docXML, "basename") as parameter: as is, it didn't work!
As you suggest, if I put a setValue between the Watched folder startpoint and the INSERT SQL activity (now with the populated string as parameter), it works...
Bah!
Thank you again!
Fabio

HT204370 I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes mov

I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes movie before this. Someone told me that i-tunes changed something so that movies can no longer be projected. We have a home theatre and have watched movies this way quite regularly, so it would be a drag if Apple will prevent us from doing this in the future.

I don’t know about projection, but I’m unable to watch HD content in iTunes because my Apple 30-inch Cinema Display is not HDCP-compliant (which is part of an HD copy-protection scheme).
The other movies you’ve projected, were they HD as well? If not, it could be the same problem: your projector is not HDCP-compliant.

Email start point issue com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error

Hi,
I have configured email start point process. While deploying and invoking the process it is not showing any kind of error. But when i send mail to configured SMTP server i recieves a mail saying
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:hadshafds
Date Sent:Wednesday, May 25, 2011 12:22 PM
Body:
Attachments:
Why i am getting error. I have tested the pop3 and smtp mail server using send and recieve activity. But when i send some mail to configured server to start a activity it replies with a mail that there is some error.
Please help me out with this issue.
Regards
Sunil

Hi Diana,
i tried to add the user and gave invoke access but still having the same issue.
Please find the following log error
19:24:20,633 ERROR [STDERR]     ... 60 more
19:24:20,635 ERROR [EmailResultHandlerImpl] Internal error.
19:27:50,472 ERROR [EmailWriterImpl] EmailWriterImpl error : Unknown SMTP host: testSebi
19:27:50,474 ERROR [STDERR] javax.mail.MessagingException: Unknown SMTP host: testSebi;
nested exception is:
        java.net.UnknownHostException: testSebi
19:27:50,480 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1280)
19:27:50,482 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
19:27:50,484 ERROR [STDERR]     at javax.mail.Service.connect(Service.java:275)
19:27:50,486 ERROR [STDERR]     at javax.mail.Service.connect(Service.java:156)
19:27:50,488 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.EmailWriterImpl.send(EmailWriterImpl.java:2 60)
19:27:50,490 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl.handleFailure( EmailResultHandlerImp
l.java:529)
19:27:50,494 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl.handleFailure( EmailResultHandlerImp
l.java:425)
19:27:50,498 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.handleFailure(EmailSc anJobImpl.java:621)
19:27:50,500 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.scheduler.scan.impl.AbstractScanJob.invokeJob(Abstract ScanJob.java:142)
19:27:50,502 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.processInputs(EmailSc anJobImpl.java:165)
19:27:50,504 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.execute(EmailScanJobI mpl.java:102)
19:27:50,506 ERROR [STDERR]     at sun.reflect.GeneratedMethodAccessor509.invoke(Unknown Source)
19:27:50,508 ERROR [STDERR]     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
19:27:50,510 ERROR [STDERR]     at java.lang.reflect.Method.invoke(Method.java:597)
19:27:50,511 ERROR [STDERR]     at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
19:27:50,514 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
19:27:50,516 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,518 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.jav
a:53)
19:27:50,522 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,524 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java
:74)
19:27:50,528 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBe
an.java:357)
19:27:50,531 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapte
rBean.java:227)
19:27:50,535 ERROR [STDERR]     at sun.reflect.GeneratedMethodAccessor332.invoke(Unknown Source)
19:27:50,537 ERROR [STDERR]     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
19:27:50,539 ERROR [STDERR]     at java.lang.reflect.Method.invoke(Method.java:597)
19:27:50,541 ERROR [STDERR]     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
19:27:50,543 ERROR [STDERR]     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
19:27:50,545 ERROR [STDERR]     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
19:27:50,547 ERROR [STDERR]     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
19:27:50,551 ERROR [STDERR]     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
19:27:50,553 ERROR [STDERR]     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
19:27:50,555 ERROR [STDERR]     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:378)
19:27:50,557 ERROR [STDERR]     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
19:27:50,559 ERROR [STDERR]     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
19:27:50,561 ERROR [STDERR]     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
19:27:50,563 ERROR [STDERR]     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
19:27:50,565 ERROR [STDERR]     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
19:27:50,567 ERROR [STDERR]     at org.jboss.ejb.Container.invoke(Container.java:960)
19:27:50,569 ERROR [STDERR]     at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
19:27:50,571 ERROR [STDERR]     at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
19:27:50,573 ERROR [STDERR]     at $Proxy205.doSupports(Unknown Source)
19:27:50,575 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
19:27:50,577 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
19:27:50,580 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,582 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:
55)
19:27:50,586 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,588 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
19:27:50,590 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,592 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188)
19:27:50,594 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,596 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
19:27:50,598 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,600 ERROR [STDERR]     at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
19:27:50,602 ERROR [STDERR]     at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
19:27:50,603 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
19:27:50,606 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
19:27:50,608 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
19:27:50,610 ERROR [STDERR]     at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
19:27:50,612 ERROR [STDERR]     at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:87)
19:27:50,614 ERROR [STDERR]     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
19:27:50,616 ERROR [STDERR]     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
19:27:50,618 ERROR [STDERR] Caused by: java.net.UnknownHostException: testSebi
19:27:50,620 ERROR [STDERR]     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:177)
19:27:50,621 ERROR [STDERR]     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
19:27:50,623 ERROR [STDERR]     at java.net.Socket.connect(Socket.java:529)
19:27:50,624 ERROR [STDERR]     at java.net.Socket.connect(Socket.java:478)
19:27:50,626 ERROR [STDERR]     at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:232)
19:27:50,627 ERROR [STDERR]     at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
19:27:50,629 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1250)
19:27:50,631 ERROR [STDERR]     ... 60 more
19:27:50,633 ERROR [EmailResultHandlerImpl] Internal error.

Movie start points in a session

Similar Messages

Maybe you are looking for