Movie Stops after 32 minutes!
Hi, rented a movie on Apple TV but it stops after 32minutes! Apple keep loading but nothing happens..Software is up to date..pls advise
thanks
Welcome to the Apple Community.
Have you tried restarting the Apple TV and trying again.
Similar Messages
-
Songs stop after a minute of play
I just downloaded an album on iTunes and some of the songs stop after a minute and move on to the next song. I'm having a real tough time finding an answer to this one. Does anyone know of a fix for this? Maybe a re-download?
Cheers!Solved it! Thanks.
-
BT Sport HD: sound stops after a minute or so
Hi
Firstly I was impressed with the launch show last night - well done BT!
I have a YouView box and Infinity BB. I tried to watch BT Sport 1 on HD (channel 510), but after a minute the sound stopped. I could change channels and then come back to 510 and the sound would be there, but again would stop after a minute or so. This happened on all the Sport HD channels.
Note that the SD Sport channels (507 - 509) were absolutely fine.
I tried re-booting the box, but it didn't solve the issue.
Has anyone else had this problem?
Thanks
SimonThis is a me too message. I suspect it is a Dolby digital problem. The picture has been rock solid so far. I'm using Youview.
I have a followup and a workaround to this problem
I contacted BT and they are convinced that the problem is due to the powerline adaptor, which was supplied by BT along with the Youview box. They tell me that their technical help files state there is not enough bandwith available. They are going to send me, free of charge, a 10 metre ethernet cable for a direct connection to the router. I was very sceptical when I was told this over the phone and my subsequent action below confirms my scepticism.
After the call, I tried the following setting change on the Youview box. I went to settings>tv signal & quality>HDMI Audio format and changed this from surround to stereo. This effectively turns off the dolby digital output. The problem disappears! Of course, this turns off dolby output for all HD channels on the box which is not desirable.
This makes me convinced it is a dolby audio problem but getting BT to recognise this might be more difficult. I hope they can fix the problem soon. -
When I play any video with any player, it stops after few minutes
When I want to play any video it stops after few minutes as freeze. Sometimes it continues without sound and others stops completly. I try to play it with more than one players, but same.
The video it's .mkv
I tried with:
- Quicktime X with Perian
- MplayerX
- Mplayer OS X ExtendedYou should probably take it to the closest apple retail store and have someone at the genuis bar help you. If you dont want to do that you should probably purchase a software or use a free trail version of one to run a virus check.Ive found that Mcfee is a good virus scan program.
-
I have Snow leopard, 10.6.8 on my iMac, I just tried to install Lion from the App store, but during proces, the install stops after one minute saying: "software might be damaged". I downloaded the software again, same thing. What must I do to install Lion? I have still 487GB free.
Quit all other programs and open Disk Utility
Select your "MacintoshHD" drive on the left and indented and click Erase > Erase Free Space > Zero and let it complete.
Also run First Aid > Repair Disk and permisisons.
If Repair disk gives a error, you have a bigger problem, if repair permisisons fixes and completes, even if it fixes the same thing twice if you click it again, it's ok. Apple just changed things.
You should be able to download the file sucessfully this time, if not, take it to another location with better/faster internet.
If not then run through this list
Step by Step to fix your Mac -
My iPod nano 6 stops after 2 minutes playtime
My iPod nano 6 stops after 2 minutes playtime
Contact Apple Support or visit Genius Bar to have your ipod checked.
-
Screensaver stops after 2 minutes in 6110 Navigato...
Hi,
I've got a 6110 Navigator 3rd edition symbian and the screensaver stops after 2 minutes, the screen wents totaly black.
I want to have the sreensaver always on and running in order to see the clock and informations about missed calls and sms.
Is there anyone who knows the solution for this issue?
Thank you in advance.
Best regards,
Nuno Batista
Nuno BatistaI believe it's designed this way to save battery power. keeping it on all the time will drain the battery life horribly.
What I do is not to use the screen saver at all and set the phone to "lock keypad" on closing sliding it close. Then when I need to check the time, just press the dial key (green) and the time will display for a short time before fade away.
Hope it helps.
/alan -
Why does the movie stop every 5 minutes?
Movie stops every 5 minutes, despite excellent bandwidth and signal strength,
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
Why Does Movie Stops After First Clip?
I created an iMovie from about 20 clips but once saved the movie stops after the first clip. How do I get it to run full length without having to insert Transitions?
BlueMovie,
It sounds like you only have the first clip selected (highlighted in blue).
Click somewhere above the timeline so that no clips are selected. Now your movie should play in its entirety.
Matt -
Hi , I just bought robert kiyosaki financial iq audiobook from ITunes from my iPad but the sound stop after 5 minutes playing. Can someone assist me please?
Have you tried copying it to your computer's iTunes via File > Transfer Purchases and seeing if it plays ok on your computer ? If it does then try deleting it from your iPad and then sync it back and see if it then plays. If not then you could use the 'report a problem' link from your purchase history : http://support.apple.com/kb/HT1933
-
Problem when exporting movie, video stops after 2 minutes
I set up a Project containing both images and videos. They were all shot using a digital camera (Canon SD400).
When I export the 5 minute movie, around 2 minutes the video freezes, but the music (from an mp3 file) keeps playing. At 2 minutes one of the videos start to play and the video has a little yellow button showing on it in the timeline. None of the other videos have this little yellow button, although I am not convinced that this is the one causing the problem. Here is an image of it:
http://dombovari.com/stuff/imovie.png
Any ideas why the video playback would stop when I export it? It plays fine in iMovie when I preview the project, but when exporting, the video playback stops.
Thanks!I have this very same problem. All 640x480 clips shot with a Canon SD550. iMovie 5 will play back everything fine in iMovie, but once I export the file using H.264 or MPEG-4, the video stops after about 30 seconds (of the 3 and half minutes of the video). The music still plays, but the video has not exported properly (and it shows in the file size).
What WILL work is if you export it to web, but I can't use that. I need it exported at its full quality. (Also will not work, by the way.) But, again, it plays in iMovie just fine. I even tried exporting from the timeline file (with the reference media files) in the iMovie file package—but I get the exact same results.
Quite frustrating considering it works in iMovie just fine. Any other ideas, folks?
System/Software: MacBook Pro 2.0GHz, 1 GB, 256 X1600. Latest Tiger, latest QuickTime, latest iMovie HD. -
Purchased iTunes movies stop after 10 to 15 minutes.
Purchased iTune movies stop playing after 10 minutes and have to be restarted.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Sources of Interference
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18 -
HT1657 I started to watch a rented movie and after 1 minute it stopped playing
I started watching a rented movie on my mac and it stopped playing after 1 minute. When I try to restart it, it just stays black and nothing plays.
Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you. -
Premier Pro CC stops after 1 minute during playback.
I have beeen editing a movie shot on a Canon 5D Mark II for the past couple months. Everything has been great.... but today CC stops during playback after 1 minute. It doesn't matter where in the 30 minute timeline I click. The footage I have reviewed a million times now suddenly stops. Hitting the play button or space bar does nothing. I have restarted the program 5 times and it keeps doing this.
First time it has every done this. Please help.More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840 -
Disp+Work.exe stop after 1 minute
Hi Experts,
I am doing the DR setup for production server. Created standby database successfully. Then I shutdown primary database and activate the secodry database to primary database adn chage the profile configration and start the SAP instance, Desp+work.exe down after 1 minute and ABAP WP table is giving error.
Attached the erroe below
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid MVQ
systemid 561 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5520
Mon Feb 21 14:14:56 2011
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5520) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 21 14:15:01 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DRSERVER_MVQ_00 <
DpShMCreate: sizeof(wp_adm) 21008 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000019050050, size: 6604928)
DpShMCreate: allocated sys_adm at 0000000019050050
DpShMCreate: allocated wp_adm at 0000000019052150
DpShMCreate: allocated tm_adm_list at 0000000019057360
DpShMCreate: allocated tm_adm at 00000000190573C0
DpShMCreate: allocated wp_ca_adm at 00000000195FABF0
DpShMCreate: allocated appc_ca_adm at 00000000196009B0
DpShMCreate: allocated comm_adm at 00000000196028F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000019689580
DpShMCreate: allocated gw_adm at 0000000019689600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000019689630
DpShMCreate: allocated wall_adm at 0000000019689640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( DRSERVER) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >DRSERVER_MVQ_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Mon Feb 21 14:15:41 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1565
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 21 14:15:51 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Feb 21 14:16:09 2011
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1472 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1472 (pos=2)
SiSelNRemove: removed sock 1472
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1472
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5520) [dpxxdisp.c 10484]
Good Bye .....
Please help me to solve this issue
Thanks in Advance
Jose H.Hi Dinter,
Please find the log below..
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid MVQ
systemid 561 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2080
Mon Feb 21 15:28:59 2011
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2080) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 21 15:29:05 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DRSERVER_MVQ_00 <
DpShMCreate: sizeof(wp_adm) 21008 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000019050050, size: 6604928)
DpShMCreate: allocated sys_adm at 0000000019050050
DpShMCreate: allocated wp_adm at 0000000019052150
DpShMCreate: allocated tm_adm_list at 0000000019057360
DpShMCreate: allocated tm_adm at 00000000190573C0
DpShMCreate: allocated wp_ca_adm at 00000000195FABF0
DpShMCreate: allocated appc_ca_adm at 00000000196009B0
DpShMCreate: allocated comm_adm at 00000000196028F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000019689580
DpShMCreate: allocated gw_adm at 0000000019689600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000019689630
DpShMCreate: allocated wall_adm at 0000000019689640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Mon Feb 21 15:29:06 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( DRSERVER) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >DRSERVER_MVQ_00 <)
DpStartStopMsg: start msg sent
Mon Feb 21 15:29:07 2011
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Mon Feb 21 15:29:46 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 21 15:29:56 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Feb 21 09:59:56 2011
========================
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Feb 21 15:30:14 2011
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1476 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1476 (pos=2)
SiSelNRemove: removed sock 1476
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1476
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
Mon Feb 21 15:30:15 2011
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2080) [dpxxdisp.c 10484]
Good Bye .....
Regards
Jose H.
Maybe you are looking for
-
Exchange 2013 - Shared Mailbox Permissions
Here is what I am trying to do. I would like to create a shared mailbox in exchange 2013 for time off requests for my employees. I will have the mailbox to be something like [email protected] If an employee is sick or requesting time off, they can em
-
Two up Display Won't Open in Precision Editor
Even though I have "Show Detailed Trimming Feedback" checked in Preferences, the two up display never appears in the Viewer when I am in Precision Editor and on a transition between clips. Also, the two up display never appears under any condition i
-
SQL 2005 database authentication Problem
In the past we have used sql user authentication to create the CF datasource for SQL databases, however, we would like to use windows authentication instead, does CF support windows authentication?
-
I keep getting this message when I use Burn to Disc - then hit build. "The bit rate at 00:00:07:11 in timeline is too high for DVD. Lower the bit rate by reencoding or removing content from the timeline". The video on the timeline is 2 min long and a
-
Very new trying to make first connection to datbase
I just downloaded Oracle JDeveloper. I have sample code from professor of connecting to a database used only for our course. I think my "make" or compiler is comiling in the wrong location. How do I make it point to the right location? When the profe