Movie streaming from computer not working after 6.0 upgrade

After the ATV 6.0 upgrade, video streaming from computer stopped working.
I'm trying to watch a movie from my computer and ATV is just sitting and buffering.
If I try and watch a preview from the video rental, it is just buffering as well.
iTunes radio is not loading.
I have the latest update of iTunes.
Regular mirroring works fine and music from the MacBook computer is working fine.
Everything worked fine before the 6.0 upgrade.

I have an RM-507 N97 as well, upgraded to v20 firmware and with the GPS antenna factory fix.
It appears that the firmware upgrade changes something between the MAPS app, the MAP data and the GPS drivers which causes this issue.
Recommended course of action is to delete and reinstall map data using PC Suite or Ovi Suite.
ps. There is another apparent problem that can cause lack of GPS fix which is currently under investigation. If your N97 is "hot" (i.e. just after charging or long periods of continuous display activity), you may have problems getting a GPS fix. Also, if you run the MAPS app for a long period of time with display active, you may see loss of fix problems.

Similar Messages

Most of my apps do not work after 3.1 upgrade

Most of my apps do not work after 3.1 upgrade. I have done a softboot 2 times and they still willnot connect.

Are you running the current version of the 3rd party apps on your iPhone - have you checked for app updates with iTunes on your computer?

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

TS2621 why my outgoing mail server not working after ios 6 upgraded

why my outgoing mail server not working after ios 6 upgraded

Ask your carrier to send you the settings over wifi and then install them that way.
I'm on giffgaff and I used the giffgaff app from the store to sort this out.
Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
Very Poor indeed and I held off using Apple products for years for this very reason!!

Iphone 6 plus facetime camera not working after 8.1 upgrade

iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

It seems the facetime camera does not work for whatsapp only it works normally.

IBooks bookmarks not working after 1.2 upgrade

I have noticed the bookmarks on my iPad iBooks are not working after upgrading to 1.2 today.
I am unable to bookmark pages when I need to. It only works sporadically.
I have also noticed when closing a book and reopening, the book opens at last bookmarked page instead of last page read.
Please advice about any fix.

Same problem here, Bookmark always worked properly before iOS 5. I too noticed this while reading Steve's biography, ironic??
I have noticed that besides it appearing on previous page, that if I turn to lanscape and chose the bookmark it is appearing on the right of the second page of the two that appears as should be. So I wonder if this is some problem of formating between landscape 2 page view and the single page portrait view?
My two cents but this is sure annoying! I have not seen it jump back like some noticed however, just previous page in portrait view!

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

Z580 Dolby digital plus not working after Windows 10 upgrade

Dolby Digital Plus is not working after I installed Windows 10 upgrade, I've tried several things to fix the problem with no luck, has anyone else experienced the same problem and found a fix ???

Hi,I have tried by switching dolby on but its not showing any difference. The app is installed but not working you can do on/off, set equlaizer but it doesnot show any effect. Recently i have upgraded to windows10.I used to love the Dolby experience but now its not working and its really disappointment for music lovers & gamers. Please provide any help on this issue. ThanksGopal

Printing wirelessly from computer not working

I am trying to print wirelessly from my computer but when trying to print a word document, it does not work. In the "select printer" tab, the only options available to me are Fax (USB) and Fax (Network)...the printer is in "fax" mode and it will not allow me to print the document.
I do not have a landline and therefore do not need the fax option but it seems to have been automatically set and I do not know how to change it.
How can i set up my word/excel to print wirelessly to my HP 4620, how to take off the fax?

To remove the fax driver, just right mouse and uninstall. There should another printer that is the similarly named without the "Fax", use that printer to print.
Also, how come you have Fax (USB) and Fax (Netowrk)? Did you install the driver twice, once as usb and another network? The computer can only have that printer either as usb or network, but not both.

Scan to computer not working after installing wifi booster

working with windows 7 and hp 6515 - just installed a power booster and printer no longer finds computer when try to scan to computer

Hi @Eflyer,
Welcome to the HP Forums!
I see that your scan to computer is no longer working after installing a wifi booster, with your HP Photosmart 6515, on Windows 7. I am happy to help you with this connection issue!
Please see the following:
This YouTube video on extending the wireless signal. Extending Wireless Network Range.
This scanning guide, A 'No computer found' Message Displays during Scanning.
Most likely it just needs to be reconnected to the proper network.
Hope these guides help, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

IPhone 4S cameras do not work after iOS 8 upgrade

I have an iPhone 4S 16 GB, It worked perfectly under iOS 7.1.2. . . I upgraded the OS to iOS 8.0.2 about two weeks ago. ( Bad Move )
I noticed right off that my device was running a little slower, lagging, and worst of all my "Camera" App does not have an image At All ! ! !
The Flash options, HDR options, Timer options, will switch back and forth, but that is all that works, none of the bottom selections work at all,
and when you hit the front/back camera icon, it freezes /locks the options that did work. I have done a deep restore twice on the device,
restored as New Device, still no change at all on the behavior of the Camera operation. One thing I did find out though, it is a Glitch in the iOS
software, pertaining to the Cameras Operation, reason being, is that I can go into the preinstalled Game Center App on the iOS 8, click on Add Photo,
click on Take Photo, and there are my cameras, working perfectly, front & back. I have done a lot of research on this issue over the past two weeks,
Reading Apple's own Compatibility Devices which start at iPhone 4S and later for the iOS 8.0.2, But, If you go into the iPhone iOS 8.0.2 Operators Manual, go to camera section, you will see that there are several of the New functions of the Camera that are only compatible with iPhone 5 and later. Leaving the iPhone 4S not capable of executing the full capabilities of the New Camera App. I've chatted with Apple Online Chat Support for several hours two days ago, the only resolve they had was to send the device in or take it to an Apple Store and they would correct that issue "Free of Charge", even though ,my iPhone is 3 years out of warranty, because it is a Software related issue.... All I wanted to do is find a way to revert back to iOS 7.1.2, I found out very quickly, that is Impossible to do, because it violates Security Issues and Apples Terms of Agreement," Leaving them Not Responsible for any issues what so ever that occurs to your device downloading the iOS 8.0.2. . Which in my opinion, is pretty messed up. . What is the Big Deal of reverting back to any iOS you want, Apple should support every iOS version they have, not the users fault that a New iOS does not work right on their device, slowing it down, etc...I run Windows 7 on my PC, I can revert back to any OS I want, no problem at all.. . Anyways, back to iPhone issues, The other issues I got with the upgrade is that, My device will not power back on after I power it off now, I have to do a reset to get it to booted back up and running, and when I do so, there is a white halo that appears on my screen for several hours, then it will finally dissipate (no idea what that's all about), , Also, the battery life is much shorter now, had much better battery time on iOS 7.1.2 . . . Apple Support said that my Case was the first they have heard of, which surprised me.
<Edited By Host>

I'm not quite clear on how your phone is working right now. I also don't know what "every possible thing" means so here is what you can do to troubleshoot software issues yourself. To be safe do a backup before doing anything.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Use iTunes to restore your iOS device to factory settings - Apple Support
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Just so you are aware, now that you've had a local hardware person repair the phone you no longer have any warranty or service support from Apple. Good luck.

OneKey Overclocking Not Working After Windows 10 upgrade

I upgraded my OS to Windows 10, and after the instalation, I realized that when i press the OVERCLOCK button on my to on my desktop to run the overclock it doesnt light up or run nor can i run the aplication when i click it on my computer (the one that allows me to switch from basic, extreme etc.) I would really appreaciate some help with this. Thanks (My Desktop is a Erazer x510 desktop 10140)

Lenovo Pls solve this Issue quickly this is one the main reasons I bought this machine and now its not working just sent out some privet msgs to lenovo tech staff i hope they answer with a fix.

HDMI Port not working after Windows 10 Upgrade

My HDMI port quit working after upgrading to Windows 10. The VGA port works fine. I have triend many of the fixes for listed for this issue for upgrading from Windows 7 to Windows 8/8.1. Here's whay I've done so far... 1) Downloaded the most recent drivers for my Intel(R) Graphics Card. Outcome: It said the drivers installed were newer than the driver I was installing. Tried anyway, didn't work. 2) Uninstalled the driver and let windows update it.Outcome: Black screen, then it restarted and installed the same driver it had before. 3) Tried installing the Windows 7 Driver for my Intel(R) Graphics Card. Outcome: Black screen, then it restarted and installed the same driver it had before. 4) At this point I tried the last resort. I spun around three times in a circle and spit in the corner.Outcome: Wife yelled at me and kids thought I had a demon. Please help, I use this computer in the office to connect to a 65" TV and I NEED my HDMI port.

Yeah, lot's of people on this forum have stated they have the same issue. It's not just people with Intel/AMD switchable cards either. I have an AMD 8650G + 8670M dual grapgics card and I am having the same issue.

VMWARE not working after latest kernel upgrade [SOLVED]

I've done a kernel update and after rebooting VMWare was not working. That's "standard", I figured, because I have a new kernel.
So, I run the any_any patch (as usual) to re-configure the VM to the new kernel but this time no joy
Is there anyone else having the same problem?
The error seems to be here:
In file included from /tmp/vmware-config0/vmmon-only/common/hostKernel.h:56,
from /tmp/vmware-config0/vmmon-only/common/task.c:24:
include/asm/page.h: In function 'pte_t native_make_pte(long unsigned int)':
include/asm/page.h:112: error: expected primary-expression before ')' token
include/asm/page.h:112: error: expected ';' before '{' token
include/asm/page.h:112: error: expected primary-expression before '.' token
include/asm/page.h:112: error: expected `;' before '}' token
make[2]: *** [/tmp/vmware-config0/vmmon-only/common/task.o] Error 1
make[1]: *** [_module_/tmp/vmware-config0/vmmon-only] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.22-ARCH'
make: *** [vmmon.ko] Error 2
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
Unable to build the vmmon module.
R.
Note: Running /usr/bin/vmware-config.pl is of no help either (same error).
Last edited by ralvez (2007-07-28 13:58:06)

stonecrest wrote:Yes, and the PKGBUILD works;
You'd rather say "I, myself, me, thinks it works".
Because it does not work for many people, including me.
The modules do build with kernel 2.6.22.X, but the network behaviour using bridged networking is extremely clumsy (used to work fine with 2.6.21.X), and shared folders are a pain in the butt- for example whenever I try to copy a file from the guest to a host shared folder, the guest OS (winXP) comes close to totally freezing, and I have to kill explorer to stop the transaction.
Do you call THAT "works"?
IMO the issues with kernel 2.6.22 won't be addressed before a new VMWare version is out... Until then, yeah... the old version/PKGBUILD works...
I'm close to ditching VMWare in favour of VirtualBox, but a couple of VMWare features (mainly related to low level hardware access) still prevent me from doing so.
Last edited by scarecrow (2007-07-29 13:31:51)

No push notifications, iMessage not working after iOS 7 upgrade

I'm not receiving push notifications for Apps such as Facebook after iOS 7 upgrade and iMessage & Facetime won't work. I repeatedly get a pop-up message to connect to iTunes for push notifications but connecting to iTunes does nothing. I have searched endlessly for a resolution but can only find answers directed at iPhone users. I am so regretting upgrading, I was very happy with how everything worked before. I should also say that I have nil experience on matters "Apple" and technical jargon is lost on me :(

There are hundreds or people wih this exact same problem and apple has no interest in fixing it or publicly giving and answer to the issues.
They Botched this release big time. I look forward to having tp wipe my 64gb iPad and start from scratch. Oh boy do I!!

Movie streaming from computer not working after 6.0 upgrade

Similar Messages

Maybe you are looking for