Movie Studio Platinum 13 Problems

Hello, When attempting to render/save a movie created with 4K video files the program crashes when at some point early in the rendering process.  The 4K videos have had audio added to them off my Sony Camcorder. Thanks In AdvanceTJ4449

Hi TJ4449,
For assistance with your inquiry, our colleagues at Sony Creative Software are better equipped to assist you today.  You can reach them at http://www.sonycreativesoftware.com/support/technicalsupport.asp. Thank you for your message. >Joffrey
If my post answers your question, please mark it as "Accept as Solution"
 

Similar Messages

  • Movie studio platinum 12

    won't launch. get pop up that movie studio has stopped working. All fine a month ago.
    Deleted software and re-downloaded from cloud, still same no launch.
     (bump)
    Thanks for any help
    Neal

    Hi MovieHound! Please check my response to the same query on your other post here. Thanks!

  • Movie Studio HD Platinum 11 Bit Rate Bug

    Every time I try to set the bit rate, under the render as feature, to 13,500,000 it just goes back to 192,000 so I can't save it as a preset. It also changes back if I switch between tabs. However, if I just hit OK with the bit rate at 13,500,000 then it goes through but I constantly have to change it when I render. Any solutions or is it bugged?

    Thank you for your post and welcome to the forums, however the forums here are for Sony Vaio and Consumer product user to user assistance only. Sony Creative Software have their own separate forums and so are best qualified to answer any questions you may have on Vegas Movie Studio HD Platinum 11:
    http://www.sonycreativesoftware.com/forums

  • I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

    I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

    I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

  • When watching a movie every 7 seconds there is a very short freeze or shutter.  The last 5 movies have had this problem.

    When watching a movie every 7 seconds there is a very short freeze or shutter.  The last 5 movies have had this problem.  Iam unsure what to do.

    Welcome to the Apple Community.
    Check that no special effect or enhancement feature has been turned on on the TV itself.

  • Export Movie to MPEG-4 Problem

    I am trying to export an .mov file to MPEG-4 with no compression in Quicktime. The movie plays with no problem in Quicktime. However, when I try to export the file (File|Export|Options), the "passthrough" choice is grayed out and "MPEG Improved" is the highest resolution I can output. The video was taken with an Aiptek Action HD, 720p at 30 fps. At the bottom of the Options page opposite "Compatibility" it says "Image data rate too high for MPEG-4 Video Simple Profile Level 1". "Show Movie Properties" indicates the video is format is H.264 at 4.00mbits/sec and the audio is AAC at 31.98kbits/sec. I tried Google but could not find any information. Any help would be appreciated. Thanks in advance for your help.

    /System/Library/QuickTime
    ApplePixletVideo.component
    QuickTimeIIDCDigitizer.component
    QuartzComposer.component
    QuickTimeMPEG.component
    QuickTime Updater.app
    QuickTimeMPEG2.component
    QuickTime3GPP.component
    QuickTimeMPEG4.component
    QuickTimeBMPUpdate.component
    QuickTimeStreaming.component
    QuickTimeComponents.component
    QuickTimeUSBVDCDigitizer.component
    QuickTimeFireWireDV.component
    QuickTimeVR.component
    QuickTimeH264.component
    /Library/QuickTime
    ACTLComponent.qtx
    QTFbx.component
    AXELplayer.qtx
    Zoomify.component
    AppleIntermediateCodec.component
    ZyGoVideo.component
    Microcosm Decode.component
    on2vp3.component
    I do not have a ~/Library/Quicktime

  • Movie Studio 13

    I want to know if Movie Studio 13 works without a NVIDIA graphics card.  I am trying to get this equipment for my daughters 21st and cannot get information about this anywhere.  Can you help?

    Hi April123,
    For assistance with your inquiry, our colleagues at Sony Creative Software are better equipped to assist you today. You can reach them at http://www.sonycreativesoftware.com/support/technicalsupport.asp. Thank you for your message.
    Thanks.
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Z1 Compact and Movie Studio

    Hi There,
    I have just purchase a Z1 Compact and it would appear that either Movie Studio is missing or doesn't come with the Z1 Compact... My wife has the ZR and the Movie Studio is there.. I also beleive the Z and Z1 has this software.
    Was wondering if any one else has this issues or some advice on how i can get Movie Stuido Back
    Thanks

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    As far as I know, this application is not included for Sony Xperia Z1 Compact. Perhaps you can find a third party application with similar functions on Google Play. You can search on "movie editor" for example.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • P965 Platinum Bios problem

    Hi i have P965 Platinum with PD 915 Processor and i have a problem with the recognizing the second core
    When i was with the Bios version 1.1 the system was unstable because the ide DVD-RW was working in pio mode
    after i've updated the bios the problem was solved and the dvd is now in u;tra d.m.a mode but now  in the dual core center cpu usage 2 is N.A also the task manager shows only one CPU usage.In the bios is no option for changing that .Where is the problem .
    Thanks!

    Thanks for the reply
    First of all i will describe my mashine :
    MSI P965 PLatinum
    Intel PD 915 2,8Ghz 2x2
    PSU Model LPK12-450w dont know the  brand sorry - 3,3V- 25A ; 12V-18A
    VGA Sapphire Radeon x1600 Pro 512Mb PCI-E
    Memory : Buffalo Select 512 MB DDR2 533Mhz
    Hdd:320 GB Seagate Barracuda 7200.10 Sata2 (in ahci mode)
    DVDRW :LG  GSA-H10N Ide
    After updating to the 1,3 version of the bios and your advices(only the mps table was 1,1 and i move it to 1,4) i still have the problem .Is  it possible that my Cpu is broken?
    Thanks !   

  • K8N Neo Platinum Audio Problem

    My motherboards is connected to my home audio receiver via optical audio cable, and only sends the front left and right channels when using the ac97 codec.  How do I set the spdif connection to send all signals in a 5.1 surround system.  
    Also to note there is nothing wrong with the connection because videos using the ac3 codec use full dolby digital and all signals work.  
    Also the other channels work fine using ac97 when I attach speakers to the rear speaker analog port on the motherboard, so that channel exists.  
    Please help, much appreciated.

    I didn't even know there was a way to turn off decoding to get a passthrough.  I've found that there is a lack of options that make a difference when I need them.  I don't think it's necessarily a driver problem, because I can watch movies just fine off my hard drive in 5.1 providing they support the ac3 filter.  I emailed msi and they said:
    "You will need to install an AC3 Decoder in order to process and SPDIF output
    to the receiver."
    Problem is that I couldn't find an interactive decoder that would process multichannel output in a game.  I emailed realtek as well to get their take on it, and they said:
    "I'm sorry !!
    The AC'97 Audio codec didn't support AC-3 Encoder for SPDIF-Out .  You can try to play sound with PowerDVD or WinDVD"
    So I have no idea what to do.  It's starting to look to me that we're getting ripped off here.  My problem is that I don't own any speaker systems other than my surround sound, which I cannot connect through analog, so I guess I'm gonna be deprived or digital surround in my games.  Unless I buy an audigy 2 zs platinum which costs a fortune, and that might not even support multichannel spdif output.  
    If anyone finds a way around this, I'm sure it would help me and a lot of users.

  • K9N Platinum Motherboard problem???

    Hello. I got a K9N-Platinum motherboard and AM2 X2 4600+ CPU. However, I often got the following problem:
    My system sometimes froze, no response at all, couldn't use mouse and keyboard of course.
    1) I set up the system to shut down monitor after 60 minutes. However, sometimes the system couldn't
    recover, all parts stopped working, including hard disks.
    2) When the hard disk is transferring, such phenomenon could happen again.
    Finally I found a solution. I had to manually set up the CPU voltage to "1.35V" in BIOS which can resolve my problem completely.
    This problem only happened when the cpu voltage was set to "auto".
    I thought it was a power management problem, so I installed hotfix KB896256 and KB924441 and all dual-core
    cpu optimizers, the problem still existed.
    My system is as follows:
    K9N Platinum with BIOS 1.6 (601-7250-070********)
    AM2 X2 4600+
    Geil DDR2 800 1G*2
    Inno3D 7900GS
    Western Digital Raptor 37G
    Liteon 18X DVD burner
    500W PSU
    I want to know whether this is a defect of my motherboard. Any advices would be appreciated.
    Thanks.mate.
     

    Quote from: cxy1808 on 13-May-07, 09:43:20
    Can understand the question "what CPU core do you have"?
    I have the AM2 dual core 4600+ CPU,Windsor core, 89W watt.
    yep that i have asked, well there is nothing to worry about voltage applied manually matched with your default CPU vcore.

  • IWork documents don't move to iCloud/syncing problem

    I was creating the document in Numbers and wanted to share it. After I tried to share (iCloud link), it gaves me a message: This spreadsheet is still being moved to iCloud. Wait for the move to complete, then try sharing again... Then I checked my other docs and it hasn't been syncing the documents for last 3-4 days. It seems, that something happened last update 10.9.2... I remember having the same problem after installing Mavericks for a first time. Then I foun solution in internet... I had to delete some file in Library/ ... but I can't remember it anymore and I cant find the asnwer anymore...please ... help...

    Several users have found that going to Settings > General > Reset > Reset All Settings fixes this issue.

  • Help needed with 915G Neo2 Platinum 2 problems please help doing my head in

    System
    Case Sonata II 450 watt, MSI 915G Neo2 Platinum, P4 3.4 650 LGA775, 2x512 ddr2 5300 (cruical) Maxtor 200gig sata hd, Sapphire x800, NEC 3540, Sony DVD rom & floppy. My machine runs very stable, 1st problem however on start up I get 3 bleeps can anyone tell me what this means. I have tried looking in the manual but cannot find any reference. The usb dongle that came with the mb is installed & the are 4 green lights on. 2nd problem if I try to load the digi cell software this causes the pc to freeze were I have to switch off at the wall. Thank you for the help.
    I have now installed a new mb & I am still getting the 3 beeps. I have ran memtest & the ram passed does anyone have any other idea's.
    Thank you for the help.
     Report to moderator    84.92.165.224 

    please help, i am going to throw myself out of the window.     

  • MSI X48c Platinum boot problem

    Hi,
    I recently bought a X48c Platinum and it was working fine for the last 3 weeks, but when tried to turn on my computer this morning, it failed.  (I did not change anything in my configuration.)
    The power led turns on and the HDD led blinks at a fixed interval.
    All the fans start and keep going at full speed.
    After a while the computer turns itself of and goes into a "reboot" loop, it turns on for half a second and shuts down again and repeats this every 5 seconds.
    At the moment the only thing installed on the motherboard is the CPU (and the PSU connections) and it's still not working.
    Is this a known problem, has anyone ever had the same problem, or is my motherboard just dead?
    Mandatory info (although probably not relevant):
    Intel q6600 @ 2.4ghz (arctic freezer 7 pro)
    X48C Platinum (MS-7353 ver:3.0)
    GEIL, DDR2800, 2*2GB
    Ati Radeon 4870 (512mb)
    Western digital 1tb 5400rpm / samsung spinpoint 500gb 7200rpm / kingston SSDnow 40gb
    Windows 7 64bit (ultimate)
    OCZ600SXS (3.3v/36a, 5v/30a, 12v/18a)

    I went back to the store and got a new motherboard, after I got back it still wasn't working.
    Bought a new PSU and it's working again, my motherboard, PSU and DVD drive were all broken 
    Probably a power surge or something.
    Anyway, thought I'd post how I "fixed" the problem 

  • Crystal report for visual studio 2005 dblogin problem

    Dear Sir,
    I am using Visual Studio 2005 and crystal reports for visual studio 2005 and sql server 2000.
    When I am running the project from my pc where it was developed and a local server with server authentication, report is opening but from client machine there is a new screen come before opening the report asking for login issue. my reports has subreports
    also.
    I am using dsn file to connect with server from crystal reports where dsn file contains as follows:
    [ODBC]
    DRIVER=SQL Server
    UID=sa
    PWD=sa
    DATABASE=HRISDB
    WSID=S-AGD-PAY01\HRSERVER
    APP=Microsoft Data Access Components
    SERVER=S-AGD-PAY01\HRSERVER
    so it is dynamic bcoz i need change server name sometimes.  my question is when same report want show user from their pc then below screen appears:
    database login
    server Name: C:\program files\HRIS\HRISDB.dsn
    Databse: HRISDB
    user id:
    PassworD:
    Integrated Security: it is checked and a finish button.
    (i am sorry bcoz screenshort is not attaching so I write above what in the diagloag box for you)
    then i need to uncheck the use integrated security and click finish then the reports come. THis is very annoying for my clients.
    Please help me how can I overcome it.
    It is mentionable that I didn't use any dblogin method in my code to like setdbloginforReport(). I think there is no problem bcoz the report show correctly. Just want to know how to overcome this screen.

    You know, this forum is for controls, apis, components for the user interface Windows Forms.
    Unlucky enough, Microsoft does not support Crystal reports anymore for many years.
    Try the Crystal reports forum for .Net
    http://scn.sap.com/community/crystal-reports-for-visual-studio 
    Success
    Cor

Maybe you are looking for