Movie too long to load

I have some movies that are like slide shows with lots of
pictures. Some take too long to load for peeps who don't have my
fast uploading capability. Do I make another scene and calll it up
somehow or do I use a on enter frame play movie 2 of some sort and
what action script do I need for the best solution.. An example is
at - where I would want to split the flash movie into two sections
without having the viewer click any buttons to load the second part
of the movie. This example movie isn't too bad - but I am working
on one that has more pictures then the rest and it will just take
too long to load... what is the best method to accomplish this?
Sin's arrival
film

But they don't pass through the computer.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

Similar Messages

  • We have purchased a movie on Apple TV (2) and its taking too long to load, so we want to watch movie on Itunes on the computer but can't find rented movies on the MAC

    We have purchased a movie via Apple TV (2) and its taking too long to load, so we want to watch movie on Itunes on the computer but can't find rented movies on the MAC iTunes

    Movies rented on Apple TV aren't transferable to another device. If its taking awhile to load then its an issue with your network.
    What is your speed via speedtest.net
    1080p requires 8mbps
    720p needs 6mbps
    You can change to SD in settings
    Interference can cause issues, verify via istumbler or netstumbler
    Should be using ISPs DNS (settings - network - DNS should be automatic)

  • Apple tv2 is taking too long to load movies

    My apple tv2 is taking too long to load movies, it displays a message saying it needs 200 minutes or more, what about you guys?

    Welcome to the Apple Community.
    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

  • Page takes too long to load because of videos

    Hi. I have a website that I made, but the page takes too long to load because there are videos on it. Is there any way to stop the videos from auto-loading and instead only load when someone clicks on them to play?

    There are several ways to have videos on a page without having them load until they are selected to play. A couple are:
    1 - Opening Item in a New, Precisely Sized Window. This test site has 9 videos on the page: PhotoPresenter Animated Slideshow Themes.
    2 - QT Movies via Export for Web in QT Player. This method is more difficult to implement.
    OT

  • HT4352 apple tv takes too long to load photos

    I am running iTunes (11.1.5.5) on Windows 7 and have setup home sharing and accessing the Photo Library from Apple TV 3rd Generation.
    We have a lots of photos (approx 21000) organizaed in folders, eg:
    Main Photo Folder
    Folder 1 (5500 photos)
    F1-Sub 1
    F1-Sub 2
    F1-Sub 3
    Folder 2 (3500 photos)
    F1-Sub 1
    F1-Sub 2
    F1-Sub 3
    Folder 3 (12000 photos)
    F1-Sub 1
    F1-Sub 2
    F1-Sub 3
    Apple TV doesn't show the sub-folders beyond the first set of folders and as a result it takes too long to load our list of photos, is there anything that can be done to fix this?
    Thanks!

    I am having exactly the same issue. Moved house and now starting a movie takes minutes, not seconds... I've got both the Mac and ATV connected via ethernet to my Airport Extreme base station, but have no explanation for this bizarre slowdown. I also don't have internet currently, but I can't understand with content not purchased on iTunes, why that would make any difference...?

  • Firefox is taking way too long to load pages. I have a very fast internet connection but firefox takes forever to load websites. At first it worked fine and very fast but now very slow??

    firefox is taking way too long to load pages. I have a very fast internet connection but firefox takes forever to load websites. At first it worked fine and very fast but now very slow??

    Hi there!
    do you test other browsers?
    i suggest to make a clean install of newer version of Firefox like v8.0.

  • Keep gettng messages to update but it takes too long to load, why?

    Keeping getting messages to update FIREFOX. When the link is clicked it takes a very long time to load. Therefore, to date the updates have not happened.

    What is taking too long to load with respect to the page you linked?

  • [SOLVED] initramfs takes too long to load

    Using systemd-analyze I found out that initramfs takes too long to load:
    463ms (kernel) + 11875ms (initramfs) + 6014ms (userspace) = 18353ms
    My HOOKS array in mkinitcpio.conf is the following:
    HOOKS="base udev autodetect modconf block encrypt lvm2 filesystems usbinput fsck"
    I suspect that the long loading time of initramfs is caused by partitions decryption (I am using dm-crypt / LUKS on top of LVM).
    Is there any tool that can report loading times of HOOKS seperately, just like systemd-analyze plot does for userspace?
    Last edited by nasosnik (2013-01-21 14:45:28)

    cfr wrote:
    In what sense is it "too long"?
    I'm just wondering: suppose that you find out that it is because you are using encryption. Would you then switch to a non-encrypted system? Would you make better use of the extra seconds you might save on those rare occasions when you reboot? Even if you reboot twice a day, you might save what? Suppose you would even save 5s per boot. That will give you a whole extra 1 minute and 10 seconds a week. Assuming you don't multitask. Obviously if you multitask, the gain will be less. Would that make it worth risking the security of your data?
    EDIT: I didn't mean this to sound as confrontational as it does now I read it back. It just always puzzles me that people are so concerned about shaving a few milliseconds here and there. I always hope that they put the time they save to good use but then I realise that the time they spent shaving the milliseconds off will obviously outstrip the time saved.
    I really don't care about the boot time because of the reasons you have already mentioned. I just want to figure out if there is any misconfiguration. I am just investigating why initramfs takes significant longer to load compared with my desktop Arch installation (non-encrypted) 1316ms for initramfs. My desktop has a Pentium 4 CPU and laptop has a quad-core i7.
    roentgen wrote:11875ms (initramfs)  means the time it takes you to type the password.
    systemd-analyze is not counting the time is spent to type the password.

  • Apple TV Gen 3 takes too long to load 15,000 photos. Do I need to go back to ATV Gen 1?

    I just purchased Apple TV (Gen 3) It takes too long to load my over 15,000 photos for viewing.   This was never a problem with my ATV (Gen 1).  Do I need to go back to ATV Gen 1?

    Do you have a technical question?
    What have you done to troubleshoot?
    Typically issues like this are related to the local network. First thing would be to try ethernet, if on wifi. Make sure router is up to date. Reboot ATV, router.
    You can go to istumbler (Mac) or netstumbler (PC) to get a report of the network.

  • WRT54GS2 - Page taking too long to load?

    Recently our Internet Service Provider turned our internet back on. About a day or two after using the internet, I've been noticing problems with slow internet connection. At times it will load fast, and other times it'll take a little bit too long to load.
    For example, I had a couple tabs open this morning and tried to get on a website in a different tab. The page was taking so long to load that it gave up and I got the message "Unable to connect to the Internet".
    But I have internet. 
    On my taskbar, there's an icon in the bottom right corner showing that I have internet connection. 
    Other times I'll try to load a page and it's just blank, and in the corner of the page's tab, there's just an icon of a white sheet of paper followed by the web title.
    How come some pages are taking too long to load and others are loading just fine?
    Additional detail if it helps:
    I unplugged the power cord from my router and plugged it back in to try and fix it and that didn't work.
    My second and third attempt, I refreshed my router. Still nothing.
    Also, I have a secure network, password protected.
    There have been no severe storms recently that could have messed with the router.
    What can I do to fix this issue of a slow loading page?

     Hi ashtonlevry, it looks like your router has a messed  up settings right now. That could be because you had it on stand by for a while since you said that your ISP has just turned your connection back on.
    It's actually best for you to just reset the device back to the default settings and reinstall it afterwards.
    To do the proper reset :
    1. Press and hold the reset button at the back of the router for 30 seconds while the device is on.
    2. Release the button and unplug or power off the device.
     Once done, reinstall the settings.
     For Cable connection, check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...
    For DSL connection, here's the link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9017a6f6bece444dbb4a0746eb87682a_2210.xml&pid=80&r...
    To set up the wireless connection,  here's the link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=2bf7dc19b4a94d03b0fd91f9ce426e8a_Manually_Setting_...
    Hope these steps help.

  • Slideshow Taking WAY too long to load

    I have a slideshow posted at
    http://olyrents.com/slideshow.htm
    My client is saying it takes too long to load, and I am
    finding that it is loading all of the photos first before you can
    scroll through and view them. It's just not functioning properly.
    I wonder if someone could look at the actionscript and give
    me any suggestions? Maybe there's something else going on?
    I have attached the script from the original fla file.
    Thanks!

    That adds up to somewhere in the realm of 5MB, which isn't
    going to be a quick load time, though it might be visually workable
    if you separate the loading from the viewing.
    One thing you might consider is doing away with the preloader
    visual. With 65 images being interupted by 65 preloader screens, it
    kinda defeats the potential aethetics of the images and may lead
    one to think it's taking a long time to load them as a result.

  • Taking too long to load

    I just got a refurbished iPod 4g. When I try to connect to iCloud, it says it 'cannot connect to server' and when I try to access iMessage it tries to load the country/region I am in... for a very very long time. I have not been able to get any further in these programs that the 'loading' or 'cannot connect' screen.
    Any way to fix these loading problems, or do I just have to wait it out?
    Thanks so much!

    Hi Pandiarajan,
    well I doubt you are able to speed it up (aside from taking a faster computer ).
    And you didn't say what exactly is "too long" !?
    This message only shows the last loaded item.
    Maybe LabView is busy with initializations like checking 'VISA resource names'. This may take a while (especially when scanning GPIB or other communication buses for devices) and you just have to wait for finishing this step...
    Message Edited by GerdW on 07-20-2007 10:43 AM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Movie Too Long Message

    I wanted to create a single dvd of a home movie I created in iMovie that is about 1 hour long. When I brought it into iDVD5 I got the error that "the duration of your project is too long" or something similar.
    Is there a time length I should be shooting for?

    elect best quality over best performance for one hour or more

  • R/3 Extraction taking too long to load data into BW

    HI There,
    I'm trying to extract SAP Standard extractor 0FI_AP_4 into BW, and its taking endless time.
    Even the Extract checker RSA3  is taking too long to execute the data. Dont know why its taking so long to execute.
    Since there in not much data to take such a long time.
    Enhanced the datasource with three fields from BSEG using user exits.
    Is that the reason why its taking too long? Does User Exit slows down the extraction process?
    What measures i should take to quicken the process?
    Thanks for your time
    Vandana

    Thanks for all you replies.
    Please go through the steps I've gone through :
    - Installed the Business Content and its in version 3.5
    - Changed the update rules, Transfer rules and migrated the datasource to BI 7
    - Enhanced the 0FI_AP_3 to include three fields BSEG table
    - Ran RSA3 and the new fields are showing but the loading is quite slow.
    - Commented the code and ran RSA3 and with little difference data is showing up
    - Removed the comments and ran, its fine, though it takes little more time then previous step...but data is showing up
    - Replicated the datasource into BW
    - Created the info package and started the init process (before this deleted the previous stored init process)
    - Data isn't loading and please see the error message below.
    Diagnosis
    The data request was a full update.  In this case, the corresponding table in the source system does not
    contain any data. System Response Info IDoc received with status 8. Procedure Check the data basis in the source system.
    - Checked the transformation between datasource 0FI_AP_4 and Infosource ZFI_AP_4
       and I DID NOT found the three fields which i enhanced from BSEG table in the 0FI_AP_4 datasource.
    - Replicated the datasource 0FI_AP_4 again, but no change.
    Now...I dont know whats happening here.
    When i check the datasource 0FI_AP_4 in RSA6, i can see the three new fields from BSEG.
    When i check RSA3, i can see the data getting populated with the three new fields from BSEG,
    When i check the fields in the datasource 0FI_AP_4 in BW, I can see the three new fields. It shows
    that the connection between BW and R/3 is fine, isn't it?
    Now...Can anyone please suggest me how to go forward from here?
    Thanks for your time
    Vandana

  • Movie too long to burn in iDVD

    I am converting old VHS tapes to DVD. Qaulity is not so important as the VHS was originally a transfer of old 8mm. I used a DV bridge and set the tape to run. iMovie imported 19 clips totalling 2 hours and 58 minutes. I have created 6 Chapters for iDVD, but when I import this into iDVD it is too long to burn. What is the maximum time an iDVD movie can hold, and how do I split my iMovie project up into short enough clips without losing continuity in iDVD?

    Hi Ian Sr:
    Welcome to discussions
    A DVD-R disc can hold about 4.7 GB. This allows up to 120 minutes of high-quality video to fit on a DVD.
    How to split it up?
    http://www.danslagle.com/mac/iMovie/usage/5003.shtml
    Sue

Maybe you are looking for