Movie viewing issue

I have itunes version 11.0.2 and am trying to play both rented and purchased movies.  However, whilst I can hear the music / dialogue, I am left with a blank screen - any ideas on what the issue might be?

I'm having the same issue...
I installed the latest version of Quicktime on a new PC and when I play a quicktime movie, the screen is split in half and I get to two left halves of the movie playing in both sides. I've tried uninstalling and reinstalling to no avail. Anyone else encounter this problem or know how I could go about fixing it?
Thanks...
PS change to full screen doesn't help.....
Please HELP......

Similar Messages

  • Iphoto & Iphone 5 Movie viewing issues

    Hi, I have Iphone 5 OS 6.1.2 and I download my photos onto Iphoto 9.4.2, but Iphoto doesn't recognise my movies in my movies smart folder, and also has made imovie imports complicated, but not impossible. Any ideas how to easily view all my movies? I do a few movies so I'd prefer to no have to do manual folder creation, if there is an easier way available. I have tried theS Smart Folder Option

    Add both Photo is Movie and file name ends in .mov (or whatever is the extension and set it to ANY.

  • IN MB51 Report price showing less at the time of Mov.221 issue for project.

    Hi,
    SAP Experts,
    I have one issue.
    In Mb51 Report i wil get less value for xyz material how?
    Case:  1.Material code - 610000027.
               2.Moving Vag price -  59322 Rs
               3.Total Value           -  59322 Rs
               4.Stock                    -  1Qty.
               5.Priovus price        - 274909.23 Last price changed 02.07.2009.
               6.PO.                - 45000253.
               7.Doc.No          - 5902801452.
               8.Posting date  - 04.01.2010
               9.Mov-221 issue to project.
    But  In Mb51 Report i wil get  MATERIAL VALUE = 28832 Rs. How?
    Pls Help Out...

    Hi,
    SAP Experts,
    I have one issue.
    In Mb51 Report i wil get less value for 610000027  material how?
    Case:  1.Material code - 610000027.
               2.Moving Vag price -  59322 Rs
               3.Total Value           -  59322 Rs
               4.Stock                    -  1Qty.
               5.Priovus price        - 274909.23 Last price changed 02.07.2009.
               6.PO.                - 45000253.
               7.Doc.No          - 5902801452.
               8.Posting date  - 04.01.2010
               9.Mov-221 issue to project.
    But  In Mb51 Report i wil get  MATERIAL VALUE = 28832 Rs. How?
    Pls Help Out...
    Regards
    Mahendra

  • Edit the hyperlink in the alert email (Modify my alert settings, View Issue Tracking)

    is it possible to add the external hyperlink in these emails instead of the internal hyperlink? 
    in example when I get a list tracking email there are hyperlink that get sent out with these tags Modify my alert settings | View Issue Tracking | mobile view  that use the internal url //servername how can I change it to use the external
    address //internetname

    Hi Joe, check out the following links for solutions:
    http://sharepoint.stackexchange.com/questions/13216/how-to-create-custom-email-alert-template-in-sharepoint-2010
    https://social.technet.microsoft.com/forums/sharepoint/en-US/e5ebc5a7-8295-49e4-a817-c31066e1ac3d/customize-the-sharepoint-2010-email-alert
    http://www.alectang.com/blog/archive/2012/05/16/how-to-customise-sharepoint-alert-email-template.aspx
    cameron rautmann

  • Viewing issues with Adobe Acrobat Professional 8

    We have Adobe Acrobat Professional 8 installed, and we are having some issues when viewing pdf documents.  Once a Word document is converted to a pdf document, some of the hyperlinks are appearing thicker (almost bold) than others, and some of the text appears lighter/darker than the rest of the text.  There is no pattern to this, it is all very random.
    When we print the pdf document, everything looks correct, so this only happening when we view the document on the computer.
    Can anyone provide a suggestion on how to fix this issue?
    Thanks!

    Sorry, I forgot the attachment!
    Hi Bill,
    I am attaching screen shots of 1) a page where the hyperlinks appear thicker and 2) the document properties pages showing the fonts.
    We have tried creating it with both the Adobe PDF Maker and the MS PDF tool and it happens using both.  I am thinking that this really is a viewing issue, because it prints out fine.  Also, it looks the same no matter what the zoom setting is.
    Please let me know if you have any other advice.
    Thank you!
    Cari

  • Move VIEW sheets in Script?

    Hello,
    I can't seem to figure out how to move VIEW sheets in a Script VBS.  Is this possible?
    thank you!
    Julia
    Solved!
    Go to Solution.

    Hi Brandon,
     Yes, I would like to change the VIEW sheet index number programmatically.  Basically I would like the functionality of   GraphSheetMove in VIEW. 
    Thanks!
    Julia

  • J'essaye de sauvegarder des séquences video .mov (  5G) issues de imovie sur un disque dur ou clef USB, à chaque essais j'ai un message d'erreur (Code erreur 0)??

    J'essaye de sauvegarder des séquences video .mov (  5G) issues de imovie sur un disque dur ou clef USB, à chaque essais j'ai un message d'erreur (Code erreur 0)??

    Rebonjour mcbuffy,
    Je suis désolé mais je me suis positionné sur la premiére réponse (voir copie si dessous) et la seule possibilité qu'il offre c'est Like(0) j'avais traduit par j'aime la réponse je l'ai donc cochée ou Reply (répondre) mais pas de "This solved my question"  
    Idem d'ailleur sur le dernier message! J'ai bien vu que dans la liste des questions certaines sont cochées.
    Je crois qu'il va falloir que je retourne à l'école.
    Re: J'essaye de sauvegarder des séquences video .mov (  5G) issues de imovie sur un disque dur ou clef USB, à chaque essais j'ai un message d'erreur (Code erreur 0)?? 
    4 avr. 2012 11:53 (in response to JEDPAT)
    Bonjour,
    - Il n'y a pas de problèmes si vous la sauvegarder sur le disque dur du Mac ?
    - En quel type est formaté la clé USB ou le disque dur ?
    Si c'est fait à la base pour Windows, en Fat32 (MS-DOS), la copie est limitée à des fichiers de 4 Go sur ces disques donc c'est peut-être ça le problème.
    Il faudrait soit couper la vidéo en deux ou reformater le disque et dans ce cas, en HFS+, si vous utilisez uniquement ces disques dans un environnement Mac. Pas de problèmes de tailles de fichiers et 100% compatible avec OS X.
    Si vous les utilisez sur Windows aussi et vous voulez passer cette limitation de taille, il faudra reformater en choissisant le format ExFAT mais peut être compatible à 100% avec les fonctions de votre Mac.
    Attention avant de reformater bien sûr car ça efface toutes les données présentes sur le disque ou la clé USB.
    Je vous conseille de lire la première réponse de ce sujet pour en savoir plus sur les compatibilités et les formats de disques :
    http://www.commentcamarche.net/forum/affich-23084805-disque-dur-et-mac#6
    Liked (1) 
    Reply

  • TS3899 how to move viewed e-mail to trash

    how to move viewed e-mail to trash.

    Either swipe on the entry in the list of emails and then tap on the red Trahs/Delete button, or if you have the email open tap on the Trashcan icon on the top toolbar.

  • How to fix Netflix Movie Viewer Error code while loading movie from Netflix.

    The Problem started with the update to Mozilla 3.6. It does not allow downloading or buffering the movie to the desktop for viewing with Netflix Movie Viewer Program. It works fine with Internet Explorer 8.0. Netflix is instructing customers to use Internet Explorer in place of Mozilla Firefox 3.6 to eliminate the problem.

    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes

  • Copying file from a Compact Flash Card or Epson Picture Viewer issues

    I am a photographer and have been experiencing issues when trying to copy or move files from my compact flash cards or my viewer HD device. Both my Sandisk reader and the epson connect to my iMac through USB (rear ports) and during the copy process, I get messages that one of the files are in use, and the rest of the copy is aborted. Since the copy process doesn't work in a numerical or filename fashion, I have to look through each file that has been copied and try to identify which files were missed. The weird thing is that if I try to copy the file that was mentioned in use, it works fine
    I am copying to a USB External drive, connected to my Airport Extreme. I've encountered the same things when the HD was connected directly to the iMac.
    I am getting very frustrated with this process, and am looking for insight on how to make this go away, or at the very least, is there an application that will copy/move and verify the files before exiting? I can't help but think that I may have missed files here and there, and those files could be now lost memories.
    Any help would be appreciated

    They'll record either while simutaniously recording to tape. I believe the HDV is in a .M2t format but I'm not sure about the DV file format. As for quality, your guess is as good as mine, I haven't had the chance to play with one yet.
    Mike
    M2 Digital Post Inc.
    San Diego, CA.

  • Flash movie display issues in IE

    Hi Everyone!
    This message is a cross-post and I apologize, but there seems
    to be more traffic in this forum and I really could use some input
    on my question. Here goes:
    I'm new to this forum, but have a little experience with
    Flash. I'm building a site, mixing flash with css and html on a
    webpage (obviously). When I test the pages in Internet Explorer,
    the display jumps around quite a bit when I navigate between web
    pages (looks fine when clicking through frames in the movies). This
    is the first time I've ever seen this (in the few times I've built
    flash-heavy sites) and this display issue doesn't happen in
    Firefox, Opera or even old Netscape. Unfortunately - most of the
    world is using IE, so I need a little help.
    I thought perhaps the Flash Satay solution might be the
    answer, but I'm not a handy programmer so before I go mucking
    around with it, I thought I'd get some thoughts from other flash
    users...
    Here's the link: mustardseedwoodworking.com/testing The pages
    in question (and the only ones that are working, really) are the
    home page, the about page, and then galleries one and two.
    (Oh finally, I'm viewing these pages both locally, on my
    computer and online after being uploaded. I have cable internet
    access. I realize Gallery 2 loads a bit more slowly than Gallery 1,
    but the primary reason I'm using flash to display the tables is
    because I want large, high rez photos. )
    Thanks in advance!
    Michelle

    Did you upload the Scripts folder that DW places in the root
    of your site?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Dunk11" <[email protected]> wrote in
    message
    news:eavmev$olm$[email protected]..
    >I need some help getting Internet Explorer to show my
    flash movie.
    >Everything
    > looks fine in FireFox, but when I test it in IE my
    movies will not load.
    > I can
    > however go directly to the .swf file in IE and it will
    load. But when I
    > try to
    > view in on the actual webpage it will not. Here is the
    link
    >
    http://www.duncanandthompson.com/test/test.htm
    > Thanks
    >

  • LT movie viewer does not update from consecutive renders

    Working on a project I created an intro with LT using some of the Live Fonts. I did a "Render Movie..." to see the results. Noticed I had a spelling error so I went back and changed the typo, saved, and then did "Render Movie.." again. When it displayed the results the original movie with the typo played back.
    Suspecting some type of cache issue, I opened up Quicktime and selected the rendered movie and sure enough, the change had actually been made correctly, it is just that the viewer in Live Type, I suspect, is not picking up the change and playing a cached version of the first edit.
    Is there something I'm missing in a preferences setup or is this yet another "Feature" of which us users would call a bug?

    - The iPad 1 can only go to iOS 5.1.1
    For video problem try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Movie playback issues

    My movies are having playback issues again. Default settings are 44.1kHz  16bps  720p HD.
    Operating System: Windows 8
    Itunes Version 12.1.0
    The issue is the sound goes in the beginning of each film. I have a computer which is two years old and yet there seems to be a recurring problem with movie playback.

    I think it depends on which version of iTunes you are using. I had the same problem with digital copy movies when I loaded the 64bit version of iTunes 8.1, iTunes64setup.exe, on a Vista machine. Once I deleted that version and loaded the 32bit version of iTunes 8.1, iTunessetup.exe, I was able to view the movie in iTunes AND download it to my iTouch.

  • Icon View Issue

    I am trying out the new Premiere Pro CS5.5 and I found an odd issue.  I like working in the Icon View when orginizing my media files.  In CS4 you could at will orginize your media anyway you wanted, i.e. row by row and move the rows up or down you could leave a gap in a row and put items after that and such.  In CS5.5, all you can do is put them end to end, you can't have spaces and they wrap around to the next row like a word doc.  To me this seems very inefficient.  Maybe this is a bug but the way it is, it is not very useful anymore!

    Peter-
    Other weird developments. While this is icon view is more of a nuissance than a problem it has shown some bugs in my system. Turns out I can access Icon view if I use Motion's window layout scheme but if I switch to mine the library window will freeze. I have thrown out my widow layouts and started fresh but it will not work. I was wondering if there are any other files I should trash other than the .plist file?
    thanks
    Bill

  • Possible solution to ATV2 slow library streaming.  iTunes movie buffering issues

    All,
    I'm not a common user of forums so forgive ettiqute/nomenclature errors.
       We were recently having issues with non-stop buffering when trying to stream movies from our iTunes library.  I've seem numerous topics and posts on this same issue.  Since we had just purchased the ATV2 we were able to call the apple care number and the tips we received made the difference.  I have to preface this by saying that we also use an Airport Extreme router.  The "helpdesk dude" had us do an "about this mac>more info>system report>WiFi".  Our transmit rate was 5 and it should be way way up there at the 100+ range(some lucky peeps get a 400-450 range I guess).   So if you are having these issue perhaps check the channel you are using and your strength of signal.  We changed channels and went to a transmit rate of 117 and our issues are resolved.  There is a signal/noise component aswell, but we ended up focusing on the transmit rate.  So take this for what its worth, hope it helps. 

    OK — I've gotten things resolved. Unplugged and replugged the ATV2 for a reset. Now everything streams just fine — even a rented iTunes movie from my Mac. Too, I have now gone into the ATV2 settings and instructed it to select standard (non-HD) movies for rentals. This is many times faster and on our large flat screen Sony, I see no difference. In any case, HD or not, the wise thing to do is to do your download well in advance of viewing — i.e. hours. The flash memory in the ATV2 should hold it for at least 48 hours (or so Apple Support tells me). As it turns out, "streaming", even with a 10 mb line and an "N" wireless system, streaming is not exactly streaming. But it comes closer to it if you select non-HD movies.

Maybe you are looking for