Movies and Audio Problem - PLEASE HELP!!!!!

Hi,
If I am working on the music for a movie file i sometimes open a new project with no global tracks, so as i can focus on the music, when i then choose to open the movie and see what the music sounds like with the movie all is fine..... until i stop the movie. If the movie is not playing or doesnt have the volume slider raised high (on the movie window), no sound is heard when i press a key on my midi keyboard. This means i can only come up with ideas when the movie is playing. If i close the movie and/or the global tracks, the problem remains the same. I have to close logic an reopen it in order for me to hear any sounds (audio tracks and midi). Any advice or help would be great as this is really frustrating me. Thanks, Ben

I use Logic Plug ins and Korg/Steinberg plug ins. I have a multi instrument set up in my environment for an external Korg Trinity Keyboard. It is no longer connected as it was too difficult to control program changes etc and recording in audio takes too long for me. This many be the problem??? Maybe i could remove the multi and see if this helps. I am thinking of re-connecting the Korg to my computer but am not sure if it will cause more problems. Any advice? Thanks... Ben

Similar Messages

  • Video and audio problem, please help!

    Every time I stream a video or play a DVD, the video and sound freezes for about ten to twelve seconds continously. It is very irritating and rather inconvenient.
    Does anyone have any idea why? I just switched to a Mac and am loving it so far. I would hate to have to take my laptop in.

    Toggle Linked selection. Shift-L. Or press the button over by snapping in the top right of the timeline,
    -Jake

  • May ipod touch can only recieved IMs. It can not call or recieve any video and audio calls, please help. thanks

    may ipod touch can only recieved IMs. It can not call or recieve any video and audio calls, please help. thanks

    Maybe try here:
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    What apps are you using?

  • FCP or Compressor Audio Problem - Please Help!

    Please Help!
    I have completed my wedding project in Final Cut and it includes 4 extra stereo tracks (music etc) on the Final Cut Time line, therefore 5 stereo tracks in total. Music was just imported into the browser and then placed according in the time line.
    When I export the whole project to Compressor, the video compresses fine into the DVD best quality format but the audio compressor has only compressed a SEGMENT of the FIRST stereo tracks?!
    Totally Bizarre.. My client is waiting for the DVD and I’m at total loss!!
    Desperate workaround (but want to avoid) If I have too i tried rendering the whole movie to a QT movie, then importing that into DVD Studio and just using the audio from that (which is ok) in my DVD project! But I don’t want to do this as I have not properly compressed the audio along with the video in the DVD best settings preset in compressor.

    No I don't think so.. I use Switch to convert the .whatever files into .aff compliant files. Something has obviously go a miss somewhere during my edit, I just cannot think where. I did ask before if there was anyway to check for compression markers as the orginal problem seemed to be rendering just only a section of the audio. I did a clear markers control+' which clears markers on the timeline but not sure where that leaves compression markers. As I imply, I didnt deliberately saet any compression markers but maybe some crept in there?
    Also I found it odd why SP pro originally came up with just "Error" when I tried to export the project to it? I tried a fresh sequence with a small amout of video on it and it exported fine into Soundtrack Pro (SP).
    Additional question: What is the purpose for the mix down in the Sequence settings then? I seemed to do the trick for me? Should I include this in my work-flow because it is not always necessary to use Soundtrack Pro just for laying down a music bed?
    Thanks

  • Audio-problems, please help!

    iphone4G:
    I can´t use my telephone :-(. There´s no audio. The phone-partner can hear me, but I can´t hear him! When I take the hear-loud-function, I can hear him!
    Do you have an idea? I restarted already and the one-year-guarantee is just over ...only a few days :-( 
    Please help!

    This is really a reply to everyone on this thread.
    Thanks for all your comments and input, I now have something extra to add.
    I've had further discussions with the Apple techs, who read through a report I sent them, and this thread, which revealed that only tracks purchased in Tiger via iTunes escaped the sound issue (see above).
    I carried out a few more tests while in discussion with them, but to no avail. Their recommendation is scrub the disc, and install a completely new system. I'm not looking forward to that, but at least I have the benefit of two hard discs in my 'mac running independently, so I'll use one of those.
    I've been further advised by an IT friend that the problem might be caused by another piece of software being present on the machine that has an effect on Quicktime, even while it is not active. He said that that is a nightmare to track down, installing one item of software after another in an attempt to make the fault reappear - or not, of course.
    It seems that if this does not fix the problem, there might be a fault with the 'mac itself. First things first though, scrub the disc. Unless anyone can suggest anything else?
    Daniel, you suggest cleaning the cache. I don't really understand caches at all, so if you could give me a short idiot's guide to what these are, and what you might feel the benefit would be, I'd very much appreciate it. Will it do anything else to my system?

  • Movie and audio problems on the classic

    I just bought my first Ipod (a 160gb classic). I had a couple movies and a lot of music videos already on my hard drive, all of which I legally own. Some transferred to Itunes and some did not. My first question is how do I get the ones that didn't transfer to do so.
    Secondly, of the ones in i-tunes almost all would not transfer to the ipod. (The message would read "this item was not copied because the audio format/file type is not supported by the Ipod 'administrator's ipod'"). I hit the "Advanced" and "Convert Selection for Ipod" options. Some transferred to my ipod okay while others still will not transfer, even though they were allegedly synced. Why?
    And thirdly, of the ones that did transfer to my ipod, some are fine without any problems. But with others the video works okay but there is no audio. How do I fix that?
    Any help that can be provided would be GREATLY appreciated.

    And thirdly, of the ones that did transfer to my ipod, some are fine without any problems. But with others the video works okay but there is no audio. How do I fix that?
    Quicktime or Quicktime Pro (both of which iTunes uses) does not convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • Strange audio problem please help!

    Hi, I was recording audio with Logic and a usb audio interface (m-audio). Then, I unplugged the usb cable and I selected to use core audio. I closed Logic. I noticed that the volume controls (up and down) are no longer available and inside sys pref. there's optical out selected (the only available). There's also a red light coming from the port (I'm assuming is the optical out). If I plug in the hearphones everything works fine. What can I do in order to have audio played from speakers again?
    Please help!

    Update: I followed some instructions I found on a blog and I managed to solve the problem. I inserted a paperclip inside the jack output port and I pushed it for a while. Suddenly, inside sys pref. the output changed from "optical out" to integrated output. It's very strange, anyway I think it's a good idea to go to my Apple Store to check if the soundcard has some problems... The MacBook is still under warranty so...
    Any comment would be appreciated, bye!

  • [Other 865 Series] 865PE Neo3-F (SATA and PATA problems),please help,thx

    Hi
    I have MSI 865PE Neo3-F mainboard and I have a few little problems with Neo.
    My first:
    I have HDD Maxtor DiamondMax10 300GB,16MB cache,SATA.When I was installing Windows,(widows setup) it shows that HDD has only 131GB.BIOS shows 251GB.what does it mean?Not supported HDD or only 130GB for one partition?
    My second:
    I want to connect also P-ATA HDD,but BIOS don´t see him.
    What would be IDE settings in BIOS and also jumper settings on PATA HDD and DVD when I want use:
    SATA as Primary Master (system disk)
    PATA as Secondary Master
    DVD-ATA IDE as Secondary Slave
    My last:
    What I should installing when I want to use all advantages of SATA HDD and what would be BIOS settings?
    PLEASE HELP IT IS URGENTLY,CAUSE I HAVE TO WORK TO MY SCHOOL
    ANY HELP WOULD BE APPRECIATED.
    Thank you

    At the first thank you for your reply.
    Yes it works. 
    Sorry I didn´t post my OS.My OS is XP (with SP2,now).
    Configuration:
    P4 Prescott 540J 3.2GHz,FSB800MHz,HT (enabled)
    MSI 865PE Neo3-F
    2x APACER 512MB DDR400 (Dual channel,slot 1 and 3)
    ASUS FX5700 256MB
    Maxtor DiamondMax10 300GB,16MB cache,7200rpm
    DVD-RW Plextor 716AK
    After installing Service Pack 2 windows shows that HDD has 300GB,but I created two partitions before (C:\ [30GB] and D:\ [100GB] in windows setup) and now (after install SP2 E:\ [170GB]) one partition in Windows.Problem how do I put together last two partitions (D:\ and E:\) to one partition?
    so if I right understand after this settings in BIOS:
    Native Mode
    ATA Configuration - PATA only (or SATA-only)
    SATA Keep enabled - yes
    PATA Keep enabled - yes
    PATA channel selection - both
    and what about another two options in this menu?what are the settings?(somtehing about 1st channel and so on)
    connections looks like that:
    on  IDE ATA100 cable from IDE1 will be connect HDD ATA100 as Master and DVD as slave?
    on SATA cable from SATA1 will be connect HDD SATA?
    How system knows which one from two Masters HDD is System disk?from Boot menu?
    Is some page on the web where can I find closer explain of IDE (SATA) settings for MB MSI?
    Sorry for questions,but I am working at the first time with SATA disk 

  • The update and other problems PLEASE HELP!!!

    The ovi store on my phone asked me to download the newer version which I did, is there an update for ovistore on the computer because I haven't heard about it if there is one and it may solve the problems I have been having with it:
    1. I don't receive the messages when trying to get an app
    2. It wont let me down load apps when I connect my phone to the computer
    (also on the nokia website it told me to click the download and install button to get an app when plugged into the computer but I can't find it..Any ideas where it is???)
    please help i've had this problem since I first set up my account and its really bugging me now!!!!!!

    (Apologies for barging in Steve.)
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80071A91, or some other number? (If they're another number, what number are you getting?)

  • How to do this kind of Move and Rename? Please help.

    I save pictures a lot, and usually they clutter up on my Desktop until I organize them later into category folders. My folders are like this:
    VACATION PICTURES (Folder Name), and inside the pictures go: Vacation_1, Vacation_2, Vacation_3, etc.
    I'd like to be able to click on the cluttered pictures on my Desktop, select my Automator action (Move and Rename), and then have the Automator pop-up ASK me where I want to put the pictures (because I have a lot of folders, such as "Vacation Pictures," "Pet Pictures"), then ASK me what to rename them. Or, better yet, I want Automator (or maybe another program) to automatically know what to rename the files based on what folder I select to move them to. For example, if I first direct the pictures to be moved to the "Vacation Pictures" folder, in which all the files are Vacation_1, Vacation_2, Vacation_3, etc., I want the program to automatically rename the newly-moved pictures and continue the existing sequence by going Vacation_54, Vacation_55, etc.
    So I want Automator to automatically continue the already existing sequence in the folder. After the move, I want it to automatically figure out what the name will be and the sequence number to start on to join the others.
    Is this at all possible with Automator or any other program? Thank you so much!

    I think AppleScript would be easier than Automator to do this with, it's more flexible. In fact, I wouldn't be surprised if an AppleScript application could be made with Xcode (aka Applescript Studio) to do something like this. Either way, it could take some time before you could do anything if someone hasn't doesn't something like that already. Have you used the search feature in the AppleScript forums to find out if someone has some sort of image or picture or pic organizer? You might even try Google.
    However, what you've described sounds like it's verging on micromanaging, and it seems very time consuming. Have you consider the possibilities of iPhoto and maybe going along with something it can provide? For instance, is it really necessary to name each pic if they are already grouped? Personally, I'd rather tag them since then I only have to spell the tag once and then can easily find a variety of photos from several albums. For example, all the pics with flowers, or statues, or paintings, and what not. I hardly have any photos named in iPhoto and depend mostly on tags or the names of albums. It may not be worth renaming the old generic names with new generic names.
    Also, iPhoto is more specialized for managing images, while the Finder is generally for any type of file and therefore isn't very specialized for any particular type.
    Similarly, genres for music are useless to me and I'd rather tag songs with moods and subjects. So, I changed all the genre field into something more informative and that could be used for grouping the music into Smart Playlists by search criteria based on keywords in the genre field. Much more useful and worked like a great pre-Genuis option years before they added that.
    Anyways, just some suggestions for creating more flexible approach towards your hundreds of photos. It's helped me find what I want with both photos and music, in particular allowing me to create smart albums or playlists that automatically update themselves with new items whenever I tag another photo or song. No need to organize each and every single photo by dragging and dropping them into several relevant folders. They just show up where they fit in based on their tags, everywhere they belong. Though I have thousands of photos, I've gradually added tags to the older pics I had before tagging, and I definitely tag new ones as soon as I import them in iPhoto.
    Of course, you might have some fantastic plans needing this initial foundation you are suggesting. Personally, I cringe at the thought of ever doing what you are suggesting because I used to do things that way. And I never got done. Ever. With anything. And I figured out I really wanted something else. But that's me, and I just thought I'd throw these other ideas out there for you to reconsider your, uhm, adventure you have planned for yourself. :-D
    Good luck! I'm sure it can be done! And I hope it turns out to be useful for you! Go for it!

  • Substri and instr problem --Please help

    Hi ,
    I would like to get the find tablename starts with 'EXP' using substring and instring . I am using oracle 9i. Please help me out
    Example : 'Schema.explogtable'
    I will use table name ' EXP' in one of my procedure as input parameter to procedure
    If tablename= substr('schema.explogtable','instr('schema.explog','.',1,3) then
    Execute Procedure1('tablename')
    Else
    Execute procedure2('tablename')
    I would appreciate your help
    Regards,
    Clarkc

    ClarkC,
    Here just replace procedure1 and procedure2 with your procedure names;
    create table temp_table
    ( table_name varchar2(30)
    insert into temp_table values ('TESTME.MY_OBJECTS');
    insert into temp_table values ('TESTME.OBJECTS');
    insert into temp_table values ('ABC.ECFOBJECTLOG');
    insert into temp_table values ('XYZ.BDEOBJECTTABLE');
    insert into temp_table values ('ABC.ABCTABLE');
    insert into temp_table values ('ZYD.CLIENTTABLE');
    insert into temp_table values ('NMS.CLIENTLOGTABLE');
    COMMIT;
    pl/sql anonymous blocks  I defined 2 variables for readibility and understanding
    DECLARE
       CURSOR tcur
       IS
          SELECT table_name
          FROM temp_table;
       table_name   VARCHAR2 (40);
       my_table     VARCHAR2 (40);
    BEGIN
       FOR cur IN tcur
       LOOP
          my_table     := NULL;
          my_table     := cur.table_name;
          table_name   := SUBSTR (my_table, INSTR (my_table, '.') + 1);
          IF (table_name LIKE ('%OBJ%'))
          THEN
             DBMS_OUTPUT.put_line ('table_name containing OBJ=' || table_name);
             -- NOTE : CALL YOUR PROCEDURE1 HERE for tables containing OBJ;
            procedure1(table_name);
          ELSE
             DBMS_OUTPUT.put_line('table_name  not containing OBJ=' || table_name);
               -- NOTE : CALL YOUR PROCEDURE2 HERE for tables not containing OBJ;
            procedure2(table_name);
          END IF;
       END LOOP;
    EXCEPTION
       WHEN OTHERS
       THEN
          DBMS_OUTPUT.put_line (SUBSTR (SQLERRM, 1, 300));
          RAISE;
    END;
    Here is the output of the above block
    table_name containing OBJ=MY_OBJECTS
    table_name containing OBJ=OBJECTS
    table_name containing OBJ=ECFOBJECTLOG
    table_name containing OBJ=BDEOBJECTTABLE
    table_name  not containing OBJ=ABCTABLE
    table_name  not containing OBJ=CLIENTTABLE
    table_name  not containing OBJ=CLIENTLOGTABLEHope this helps
    Regards
    Edited by: OrionNet on Jan 17, 2009 11:48 AM

  • Itunes connection and Passcode problem (Please Help!!)

    So, my computer recently was broken beyond repair.. so when I got a new computer and redownloaded itunes i tried to connect my itouch to charge it and i noticed it said "Itunes cannot open ipod in library please imput password on ipod" I never put a password on it... aparently one of my friends did. So I was being a total DA and attempted to guess the password too many times now the ipod's disabled untill i can connect to itunes and itunes wont let me connect untill I get the password, I'm at a total loss please help!

    You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

  • Iphone 4s and iPhoto problem - please help me!!

    Hi there
    I have searched the discussion boards for an answer to my problem, but cant find one yet.
    I have a brand new imac with Mavericks installed and up to date. My iphoto is the latest one according to the app store and I have ios7.0.3 on my iphone 4s.
    I have about 300 photos on the iphone and i connected to the imac with a usb cable and it appeared as though all the photos were imported in the usual way, so i agreed to delete them off the iphone when prompted to do so.
    However, the events for the appropriate dates have been created, but they are grey and all claim to have 0 photos in them.
    When I look at last import, it says that the last import was the import I did a few days ago and appears to ignore the one I have just done.
    Please can anyon help me find where my photos are in a simple way. I am getting very cross and frustrated. I have used macs for 7 years with no problems until this.
    I would also add that my iphoto is very slow and regularly stops responding so that I have to force quit.
    Help appreciated!
    Thanks a lot
    Nick

    Thanks to LarryHN and Old Toad, my problems are nearly over, I hope.
    I did the repair and, thankfully, my missing photos are back.
    However, I now have about 100 photos which are on my iPhone 4s camera roll and when I plug the phone in, it says that it has already imported them, but I can't find them in iPhoto!
    I can see the pictures on the mac when the phone is plugged in and I look on the iphone, but I cant see where they are.
    Do you think that having photostream has complicated matters at all?
    Also, why does the photo stream on my phone (and ipad) show more photos than the photostream folder fir Nov 2013 in iphoto? Is there a delay in appearing in iphoto?
    Finally, about 3 out of 5 times, iphoto becomes really slow and stops responding, requiring a force quit. Any ideas why this is and how to fix it?
    THis is a great forum, thanks to everyone for help so far.
    Nick

  • Nokia E61i and iSync problem - Please help!

    I had the Nokia E62 and I was syncing with my macbook pro without any any problems. Last week I got the Nokia E61i and installed the plug-in for the isync from the nokia website. I have been unable to sync the 2 phones. I have deleted the phones from isync and reset the phones but no luck. I have tried both bluetooth and cable. The isync connects to the phone but give me an error message - "An unexpected error occured. Device 'Nokia E61i' synchronization failed"
    Please I need someone to help me resolve this problem.

    This Apple Tech Support Document seems to mention exactly your error:
    iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

  • C6-01 audio problem , please help =D

    my c6-01 cannot work with some 3.5mm audio jack headset . 
    long time ago i tried to use apple headset ( ipod shuffle 3rd gen , headset with control button ) , it works but the sound is not nice . after few month ( now ) , i bought a logitech UE 200vi to use it with my phone , but it cannot be used =.= . my phone shows " accessory not supported " ( the apple headset shows this too now ) .
    i can use both this headset IF i plug in 80% or the jack and then only plug in fully . BUT , the volume is VERY small , i have to press and hold the " play " button on the headset to get a normal volume . 
    can any c6-01 user please try it so that i can know if its nokia problem or my phone's problem 
    THANKS .

    http://www.nokia.com.my/find-product/accessories/all-accessories/headsets/wired-headsets/nokia-stere... , here shows that c6-01 is capable of using on cord control button headset , but why my c6-01 can't use it ??

Maybe you are looking for