Movies and white on black settings

When i go on road trips, i want to watch movies on itunes for up to six hours, is there a way that i can hit control-option-command-8 and have everything but the movie i am watching be reversed? thanks

The current Apple TV shipped with version 5. The 2nd Gen with version 4. The 1st gen stopped at version 3.0.2
To better clarify what you have
1st Gen
2nd and 3rd Gen

Similar Messages

Can the Galaxy SIII have a white on black Settings/Setup Screen?

I was at the Verizon store yesterday comparing the Galaxy SIII to the new iPHone5. I need a white on black theme, like my iPhone4 has. The Galaxy had a white on black theme, except the Settings page. Could someone please verify that this is correct? I couldn't find a way to make the Settings or Setup page white on black.
I would appreciate anyone's input, the Galaxy would be my choice because of it's larger screen and feature's, but it's not having a white on black Settings page is a show-stopper for me.....

Thank you for replying! I guess I missed it when spending time with it, at the VZW Store. The bigger screen makes it my preference over the iphone5. Apple's only lengthening the new iphone by a half inch, just doesn't cut it.

White on Black Settings causes all pictures to look like negatives

Hi,
I was changing some settings on my iphone. When I changed the accessibility settings "white on black" --> On, the photos in my album started looking like negatives.. so did all the default wall papers.
When I switch back to the "white on black "-->Off , everything looks back normal.
*Settings -->General -->Accessibility "white on black" --> On*
Has anyone noticed this before?Any help appreciated.
Thanks,
Kirti

The white on black setting can be toggled on and off to suit the situation, It should be used to alleviate strain on the eyes when reading lots of text, not to view pictures however. rather than only doing it for text it just makes everything negative. In Settings> general> accessibility you can change the function of the 'triple-click home' to white on black. that way you can change to white on black to view text by triple clicking the home button and then change back when viewing pictures. simple.
hope that helped

Iphone 4s less than year old att, want work, blue and white lines black screen

I have a iphone 4s with ATT, not even a year old. I dropped phone and now the screen is black with blue and white lines. I have attempted to reset the phone with no success. Is this a matter I can resolve with ATT or do I have to drive to genuis bar to get resolved?

It's probable that the iPhone has suffered hardware damage, and I don't believe an AT&T Store can do anything for you on such issues. You'll need to take or send your iPhone to Apple and pay their out-of-warranty service charge to get the iPhone replaced.
Regards.

Colors turned black and white

Colors turned black and white. Tried Settings-General-Accessability-Grayscale…..didnt work. Please help

You should look in settings > Accessibility.
Not sure which option is black and white. Did see a reverse colors.
Robert

How to set black and white only on Photosmart Plus B210a

I just buy my HP Photosmart Plus B210a at staples on 25. Usually I will just print some word documents，I want to set to use black and white only (black ink only), but can't find it.

Hi espressoking,
I understand that you are looking to print grayscale from your iPad.
I have included 2 different documents about using Apple's AirPrint. The first one is from Apple and the second one is from HP. If you find that the option to print in grayscale isn't available with AirPrint then I suggest you check out HP's ePrint app. It gives you the options to print 'Color, 'Grayscale', or 'Black Only'.
For further reference I have also included a document about getting started with the HP ePrint app.
AirPrint Basics from Apple Support
http://support.apple.com/kb/HT4356#How_to_Print
How to Use Apple's AirPrint Over a Wireless Network
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02623193
Getting Started with HP ePrint Mobile Apps
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01616126
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Black and white printing problem on Epson Artisan 50

When I print a black and white photo on glossy paper, I don't get black and white. I get a kind of purple hued black and white. Black text below, however, is perfectly black. So it seems it's not some kind of fault with the ink. I am choosing "black/greyscale" rather than "color". Any idea why this is happening and how to fix it? I have tried printing from different apps, including Preview, and same thing happens. Also different black and white images.

Yes, should be, but I'm not. Epson ink, Epson paper and same problem. The image is black and white. Converted in Photoshop. Print is set to "quality". Epson controls color. Not vivid. Paper is set to glossy. All as it should be.
What I have found by searching is this quote:
"Inkjet printers use their color inks and the black ink to generate B&W prints. But there are some noticeable drawbacks in doing it this way. Namely the possibility of having a color cast on your B&W prints, which is a barely perceptible color tint (usually green or magenta) that prevents your print from being true black & white.”
Other pages confirm this issue, so it seems that you just can't get decent, true black and white with a color printer. At least this color printer.
Do you find that when you print a black and white image you get true black and white with no color cast? Interestingly, I do when I print on plain paper, but not on glossy.

Movie Library Has A Black Screen...

Ok, whenever I try to open up the Movie tab in iTunes, the area where it normally shows movies and stuff is black. Also, when I try to import a movie, nothing happens... is there a way to fix this, because I really want to have atleast 1 movie on my iPod.

the area where it normally shows movies and stuff is black
When you're in that screen, is the center button above "View" (just to the left of "Search") currently selected?
If so, if you click the left of the three View buttons do you now see a more standard iTunes library screen?

How to export edited GoPro mov from Premiere with same settings & similar size?

I feel like this should be easy but every time I try to export my edited video it's much bigger than the original, or it's smaller and bad quality.
My business partner sent me a 720p GoPro MOV that is 33:50 long and 1.78GB. I edited out 3 minutes and want to render in the same quality.
I've tried exporting as MOV and MP4 with various settings and it either ends up huge, like 25GB or more, or half the size and terrible quality.
I also tried rendering "match sequence settings" and it chooses a GoPro codec with a weird file extension (MXF).
The closest I've gotten is H.264 "Match Source - High bitrate" but that's still 2.29GB
Thanks,
Phil

i would guess the gopro MOV file that was sent to you is h264. you can adjust the bitrate on export to h264 from premiere so its smaller. if you want more compression with sightly better quality you will have to export as dnxhd/prores or even uncompressed and then use a program like handbrake to transcode to x264 or x265.

Watching Movies: iPod to TV- black and white and split screen. Help?

I have this cable: http://www.radioshack.com/product/index.jsp?productId=2994604
As you can see, the chord colors on that cable are red, green, and white. The places where the chords go in on my DVD player are yellow, red, and white. As you can tell, they don't go up. I connected them so the audio works fine, but the movie shows up ONLY in black and white, and the screen is split right down the middle. On my iPod, the 'Video Setting' do not fix this. I also have the iPod Classic 80 GB, for reference.
Help?

Toggle between PAL and NTSC on video setting.

Cant find settings for black and white prints using konica minolta bizhub 280 printer

I am having difficulty finding where to set our network Konica Minolta bizhub C280 printer to print black and white instead of colour from my macbook pro with OSX 10.8.2. I dont want to change the default printer settings, just change individual document print settings. Can anyone please assist me as to where and how to do this?

"How about under "Default Settings"? Is there a option for B&W printing?"
No there isn't.

Can I create black and white movies using the iMovie app for the iPad?

I would like to make a black and white movie using the iPad iMovie app. Is it possible to film in black and white instead of color?

station_two wrote:
You can open and edit TIFFs, PSDs and JPEGs in Adobe Camera Raw, not just true raw files from a digital camera.
This may sound strange, but I actually got to the stage of regretting ACR several versions back, because you ended up with nothing to do in Photoshop. When you think how far ACR has come since then, you can see how Lightroom (with the same RAW conversion engine and features) is all most photographers need. Adding ACR as a filter inside Photoshop was a master stroke. I wonder who thought of it? Russell Brown would be a good bet, but Chris Cox has made it clear on more than one occassion, that us lay folk dramatically underestimate what goes into coding, intergrating, and proving new features.
BTW That was not a straight line for some joker lauch into tails of woe about all the bugs that make it into final release versions.

Photo Booth: Have lost picture settings, i.e. color, black and white, etc.

I have somehow lost the ability to choose what type of picture I want. The selections have always seemed as if they were chosen by a not very bright child, but there were at least three settings that were practical and useful. Now I only have black and white. My guess is that the problem is similar to when you sometimes lose the menu bar. The question is, how do I get my different settings back?

Hello Niku,
Here are some things you can try.
(1) Does the problem go away if you quit and relaunch
Photo Booth?
(2) Does the problem go away if you restart your
Mac?
(3) Does the problem go away after you perform the
routine maintenance operations?
( "Routine maintenance" means items a) , b) , and c) from
Travis A.- kmosx: Regular Maintenance / General
Troubleshooting)
http://discussions.apple.com/thread.jspa?thr
eadID=196761
(4) If none of the above fix your problem, try
Travis's item d)
using the following specifics:• Quit
Photo Booth if it is running.
• Delete your
~/Library/Preferences/com.apple.PhotoBooth.plist
file.
( " ~ " means Your home folder )
• Close all windows and relaunch Photo Booth.
• Check to see if all effects are available again.
• If yes, reset your preferences if you like.
• Quit Photo Booth when you are finished making
pictures.Please let us know how it
goes.
Cheers,
Jim
Apparently, it fixed itself. This morning it's back in full operating condition. Thanks for your suggestions , though.

I'm using Photoshop CC 2014, when I open a picture and movie it to a different Photoshop page, the picture turns black and white. How do I fix this problem?

I'm using Photoshop CC 2014, when I open a picture and movie it to a different Photoshop page, the picture turns black and white. How do I fix this problem?

Nobody can tell you anything without proper system info or other technical details since even your terminology is confusing. there are no "pages" in Photoshop. What you describe in vague terms could be anything from your target document having a different color mode/ color profile to some hardware acceleration issue, but we really can't make any sense of it based on your information.
Mylenium

How to make a movie half black and white and half color

Is there a way to take a full color video and make half of the video black and white and the other half full color? For instance imagine a line down the center of the video, on the left the video is black and white, on the right side it's full color. Taking that concept if an object or person moves from the left to the right side of the screen, thus crossing that invisible line they automatically switch from black and white to color.
Almost like a video mask overlay.. Is that possible in iMovie?

When I do that it only makes a short portion (the top video) color somehow it shortens the clip to 2 seconds, I tried to edit for the full 47 second clip (just a sample to play with) but it keeps going back to 2 seconds for the top video.
Any other ideas? I do have Final Cut Pro as well as Adobe After Effects as well, but I just figured iMovie would be easiest way to do this simple effect...

Movies and white on black settings

Similar Messages

Maybe you are looking for