Movies does not start to download

When i rent or buys a movie at Itunes, the file goes into wait mode and does not start to Download.
Anyone that can help me??

@FLTAron, were you able to resolve your issue, 'cause I am facing exactly same issue

Similar Messages

Rented movie does not play after download if not connected to the internet

rented movie does not play after download if not connected to the internet

Hello b noir.
Thank you for your interest in solving my problem.
What I did I opened iTune. I read the information about what does my computener need to play back a rented movie. My computer is okay to play back rental movies. So I went to the iTunes store, I searched for the movie I want to watch, i singned in into my Mac account and I bought the movie. The movie started to download to my computer, it took some time because I bought a HD version, but it never stop and after a couple of hours or little less the movie was in the Rented folder of my iTunes and also I checked to be sure that was in the movie folder. So, next day I open iTunes and click on the movie, it opens but I wait for five minuetes and never started to play back, so I tried several time and I looked for info in different internet forums but I couldn't find anything that help. So I posted the problem in this forum and also I called Apple. Apple contacted me and they let me to download the movie again. So I did it and now I will watch the movie later. Not sure if the movie will play back normally or if I am going to have the same problem. I'll keep you posted.
Apple representative did not know why this happened.
Thanks.

Does not start its download.

Good day,
I'm sort of new to the buying of apps in the Apple Store and so I just bought this OS X Mountain Lion and the buying of the app was a success. Although, it does not start its download. As far as I know, our internet connection is perfectly fine (because I'm able to write this discussion on mine) and that I can surf the net. I am aware that the download does take a long time, like 3 to 4 hours? But nothing seems to be happening...
Anyone here had the same case that I am currently having?
Thank you!

The download time, is governed by your internet connection and speed. If you are connecting to the internet wirelessly, then it would take much longer than if you were directly connected with a wire.
If you feel it may be "stuck", quit all open applications, and restart your computer from the apple menu. Once the computer is restarted, re-open up the App's store, and select the purchases tab, then resume the download.

EXE DOES NOT START AFTER DOWNLOADING

I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?

Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
for about 30 seconds and then disappears without any new window opening
Op 17/12/2012 23:55, Jeff A Wright schreef:
>
Re: EXE DOES NOT START AFTER DOWNLOADING
created by Jeff A Wright
<http://forums.adobe.com/people/JeffAWright> in /Downloading,
Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/4928607#4928607

App Rejection: After purchasing the subscription the magazine does not start to download.

Hi Everyone,
My app has been rejected, with error code 2.2 that it exibits bugs namely "After purchasing the subscription the magazine does not start to download.".
When I've gone back to test my app on the ipad, I've realised that it doesn't say 'purchased' after confirming the subscription, and instead it still says 'buy' and the subscribe button is still enabled.
I've followed the instructions in this article: http://helpx.adobe.com/digital-publishing-suite/kb/subscription-fail-ios-renditions.html, I've set all published dates to the 29th of October 2012 both in the Folio Producer Organiser and in itunes connect (Newsstand, in-app purchase section) and it still doesn't work. I've entered the secret code in the administration area also. The subscription product ID is identical in itunes connect and the Viewer builder. I've deleted the app and re-downloaded it multiple times on the ipad, updated the folio in the folio producer many times...
Can anyone see what I might be doing wrong? Is there something I have missed?
I appreciate your help.

@FLTAron, were you able to resolve your issue, 'cause I am facing exactly same issue

TS3297 Just rented a movie in French on my iMac... movie will not start after download ?

Just rented a movie in French on my iMac... movie will not start after download ?
What I do now ?

Okay. I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Firefox 8 upgrade file does not start after downloading it.

I am using Firefox 3.0.19. I tried to download the .exe for firefox 8 in order to upgrade, but when I start the exe, the only window that pops up is asking if I want to run the upgrade under this user or another. When selecting my user (I have admin rights), the window closes and nothing happens.
Do I first need to uninstall Firefox 3 ?
And also, will my bookmarks be kept when upgrading (of course without first uninstalling ff 3). Or which file should I backup and where should I place it back?

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You may have to start the installer as administrator via the right-click context menu: Run as Administrator
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

My rental does not start

Hi
I just bought my first rental. I had no probs with the dowload but the movie does not start. pls help me

Click Store... on the top menu bar, and then Authorize.

"waiting" in itunes. the download does not start.

I have bought and paid for movies in itunes. Now is it just "waiting" in itunes. the download does not start. what do I do?

re: quantization.
Logic can do a "soft" quantize as it's recording, by soft I mean playback MIDI data is quantized for both audio and visuals (piano roll), but if you turn quantize off you will see your notes as you played them.
Select a MIDI track, softsynth or external, in the upper left corner of the Inspector is a Quantize value. Click and hold to see what's available.
While you're there, make sure the Delay value is set to zero.
Also make sure that Preferences/Audio "Recording Delay" is set to zero.
And last, (very important.)
Delete the Logic 10 preferences file AND the shared control surfaces file.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro.
then delete the com.apple.logic.pro.cs file from the preferences folder.
Make sure and remove both files.

HT1657 Rented movie does not download on Apple tv

Dear apple. You've done it again. You ruined our movie night. Rented movie, got all ready to start watching. Now the movie does not download. Wrong on your Sid as Internet works (100Mbps) and other content/trailers download swiftly.
I am extremely ****** of that this happened again. I have lost the past hour trying various things and now finding a way to get my money back.
Please up your game.

Thanks King_Penguin,
The fact that I logged into an apple.com site fooled me to believe that this was a 'report a problem' site.
I since found the 'report a problem' link.
Wasn't easy to find (could not find it on my apple TV or iPad) had to:
log into iTunes via laptop, and then
click on iTunes Store (right top);
click on account (quick link or at bottom);
select "see all' next to purchase history;
click on small arrow next to 'problem' purchase (movie rental for me);
click on 'report a problem' (at bottom);
click on 'report a problem again (now inside the purchase details) - redirect to browse
fill in details, and
submit.
As you can see quite a long process.
The long process and my missed movie night were the frustrating parts.
The reponse from Apple Customer Support was swift and extremely good - makes up for the frustration.

I rented a movie and it appears in the video app, but it did not fully download. It does not appear in downloads how do I repair the file?

I rented a movie and it appears in the video app, but it did not fully download. It does not appear in downloads how do I repair the file?

Did you download it using iTunes for Windows, or did you download it directly to an iOS device?
If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App

HT204370 I purchased a movie yesterday and started the download. The download seemed to hang up at about 90%. Finally, it showed that it was ready to watch, but the movie will not play. Download is apparently corrupt. How do I get a working version?

I purchased a movie yesterday and started the download. The download seemed to hang up at about 90%. Finally, it showed that it was ready to watch, but the movie will not play. Download is apparently corrupt. How do I get a working version?

Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iPad and redownload it via the Purchased tab in the iTunes store app (or the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes).
If you aren't in a country where you can re-download films, or if you have problems with the re-downloaded version, then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

RAC does not start after trying to move storage

Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node                      Reachable?
node1                                 yes
node2                                 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node2                                 passed
node1                                 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name                             Status
node2                                 not running
node1                                 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name                             Running
node2                                 no
node1                                 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name     CRS daemon                CSS daemon                EVM daemon
node2         no                        no                        no
node1         yes                       no                        yes
Checking CRS health...
Check: Health of CRS
Node Name                             CRS OK?
node1                                 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.

Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

HT1926 download does not start i am using windows 7 and checked the pop-up blocker

download does not start i am using windows 7 and checked the pop-up blocker

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Movies does not start to download

Similar Messages

Maybe you are looking for