Movies: Embedded audio sometimes exporting, sometimes not...?
Hi, I'm working on a project right now synching to a .mov file running in Logic. When I go to 'Export Audio to Movie...', Logic is also putting the embedded audio from the .mov file into my export which I don't want. Weirdly, yesterday morning when I did it, this didn't happen. Logic 7 used to bring up a dialogue box where you could select the embedded audio if you wanted it in the bounce. This doesn't seem to be happening anymore, or has something changed?
In the Video 'Settings' the Sound Output is set to Mute and the Movie Volume is right down. I need to send this off today, so if someone can help clear this up I'd be very grateful. I'll happily supply any more info.
Thanks!
Hi, Looks like I'm WAY too late to actually help but... I recently encountered the same infuriating issue!!! In the end it was resolved when I realized that I actually had to deselect (click the space away from the text) the original audio file on the dialogue box. It's the last one to come up when your exporting (saving etc...). the one that says:
**Select the audio tracks of movie to keep in new movie**
I'm not sure I articulated that one too cleanly but I hope you get the gist.
Similar Messages
-
Wired and Wireless sometimes work (mostly not) after update.
So I have an issue with my network connection. It sometimes works, sometimes doesn't (mostly doesn't). This is for both wired and wireless. This started to happen a couple of days ago after an update. I had not updated for about a month prior. Prior to the update I used WICD and it worked just fine with no problems. I have no exotic hardware (ipw2200 using its firmware, dell xps gen2 notebook) and I set up everything about 6 months ago based on all the wikis. I have a dlink dir-825 router. Both wired and wireless connections work in windows every boot so it's not hardware.
I've included as much info as possible... sorry for the length.
Things I've tried:
Removing the ! from the INTERFACES=(!eth0 !eth1) in rc.conf
Removing netfs from the daemons
all the hostnames match in hosts and rc.conf
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="local"
USEDIRECTISA="no"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave cpufreq_conservative cpufreq_userspace fuse ipw2200)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="stupendiousman"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(!eth0 !eth1)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal cpufreq wicd alsa crond fam bluetooth)
Here is my hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost stupendiousman
# End of file
Here is my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
CRYPTO_MODULES="aes_generic aes_i586 dm_crypt xts"
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
# This is identical to the above, except the old ide subsystem is
# used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
# This setup assembles an pata raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev pata raid encrypt filesystems"
# This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata encrypt lvm2 resume filesystems firmware"
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation NV41.9 [GeForce Go 6800 Ultra] (rev a2)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
ifconfig returns:
[rick@stupendiousman ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:F0:3E:CA:66
inet6 addr: fe80::212:f0ff:fe3e:ca66/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:4454 (4.3 Kb)
Interrupt:17 Base address:0x6000 Memory:dcfef000-dcfeffff
eth1 Link encap:Ethernet HWaddr 00:11:43:72:B5:96
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
If I do a iwlist scan I get:
[rick@stupendiousman ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 No scan results
eth1 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
Here is a portion of my /var/log/wicd/wicd.log
2009/08/15 09:19:29 :: ---------------------------
2009/08/15 09:19:29 :: wicd initializing...
2009/08/15 09:19:29 :: ---------------------------
2009/08/15 09:19:29 :: wicd is version 1.6.2 436
2009/08/15 09:19:29 :: setting backend to external
2009/08/15 09:19:29 :: trying to load backend external
2009/08/15 09:19:30 :: successfully loaded backend external
2009/08/15 09:19:30 :: trying to load backend external
2009/08/15 09:19:30 :: successfully loaded backend external
2009/08/15 09:19:30 :: Automatically detected wireless interface eth0
2009/08/15 09:19:30 :: setting wireless interface eth1
2009/08/15 09:19:30 :: automatically detected wired interface eth1
2009/08/15 09:19:30 :: setting wired interface eth0
2009/08/15 09:19:30 :: setting wpa driver wext
2009/08/15 09:19:30 :: setting use global dns to False
2009/08/15 09:19:30 :: setting global dns
2009/08/15 09:19:30 :: global dns servers are None None None
2009/08/15 09:19:30 :: domain is None
2009/08/15 09:19:30 :: search domain is None
2009/08/15 09:19:30 :: setting automatically reconnect when connection drops True
2009/08/15 09:19:30 :: Setting dhcp client to 0
2009/08/15 09:19:30 :: Wireless configuration file found...
2009/08/15 09:19:30 :: Wired configuration file found...
2009/08/15 09:19:30 :: chmoding configuration files 0600...
2009/08/15 09:19:30 :: chowning configuration files root:root...
2009/08/15 09:19:30 :: Using wireless interface...eth1
2009/08/15 09:19:30 :: Using wired interface...eth0
2009/08/15 09:19:36 :: Autoconnecting...
2009/08/15 09:19:39 :: Attempting to autoconnect with wired interface...
2009/08/15 09:19:39 :: Putting interface down
2009/08/15 09:19:39 :: Releasing DHCP leases...
2009/08/15 09:19:39 :: Setting false IP...
2009/08/15 09:19:39 :: Flushing the routing table...
2009/08/15 09:19:39 :: Putting interface up...
2009/08/15 09:19:39 :: Running DHCP
2009/08/15 09:19:39 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:19:39 ::
2009/08/15 09:19:39 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:19:39 ::
2009/08/15 09:20:09 :: dhcpcd: timed out
2009/08/15 09:20:09 ::
2009/08/15 09:20:09 :: DHCP connection failed
2009/08/15 09:20:09 :: exiting connection thread
2009/08/15 09:20:11 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 09:20:11 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 09:20:11 :: Sending connection attempt result dhcp_failed
2009/08/15 09:21:03 :: trying to load backend ioctl
2009/08/15 09:21:03 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
2009/08/15 09:21:03 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
2009/08/15 09:21:03 :: trying to load backend external
2009/08/15 09:21:10 :: Putting interface down
2009/08/15 09:21:10 :: Releasing DHCP leases...
2009/08/15 09:21:10 :: Setting false IP...
2009/08/15 09:21:10 :: Flushing the routing table...
2009/08/15 09:21:10 :: Putting interface up...
2009/08/15 09:21:10 :: Running DHCP
2009/08/15 09:21:10 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:21:10 ::
2009/08/15 09:21:10 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:21:10 ::
2009/08/15 09:21:40 :: dhcpcd: timed out
2009/08/15 09:21:40 ::
2009/08/15 09:21:40 :: DHCP connection failed
2009/08/15 09:21:40 :: exiting connection thread
2009/08/15 09:21:40 :: Sending connection attempt result dhcp_failed
2009/08/15 09:22:28 :: Putting interface down
2009/08/15 09:22:28 :: Releasing DHCP leases...
2009/08/15 09:22:28 :: Setting false IP...
2009/08/15 09:22:28 :: Flushing the routing table...
2009/08/15 09:22:28 :: Putting interface up...
2009/08/15 09:22:28 :: Running DHCP
2009/08/15 09:22:28 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:22:28 ::
2009/08/15 09:22:28 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:22:28 ::
2009/08/15 09:22:58 :: dhcpcd: timed out
2009/08/15 09:22:58 ::
2009/08/15 09:22:58 :: DHCP connection failed
2009/08/15 09:22:58 :: exiting connection thread
2009/08/15 09:22:58 :: Sending connection attempt result dhcp_failed
2009/08/15 09:23:17 :: Daemon going down, killing wicd-monitor...
2009/08/15 09:23:17 :: Removing PID file...
2009/08/15 09:23:17 :: Shutting down...
2009/08/15 13:16:59 :: ---------------------------
2009/08/15 13:16:59 :: wicd initializing...
2009/08/15 13:16:59 :: ---------------------------
2009/08/15 13:16:59 :: wicd is version 1.6.2 436
2009/08/15 13:16:59 :: setting backend to external
2009/08/15 13:16:59 :: trying to load backend external
2009/08/15 13:17:00 :: successfully loaded backend external
2009/08/15 13:17:00 :: trying to load backend external
2009/08/15 13:17:00 :: successfully loaded backend external
2009/08/15 13:17:00 :: Automatically detected wireless interface eth0
2009/08/15 13:17:00 :: setting wireless interface eth1
2009/08/15 13:17:00 :: automatically detected wired interface eth1
2009/08/15 13:17:00 :: setting wired interface eth0
2009/08/15 13:17:00 :: setting wpa driver wext
2009/08/15 13:17:00 :: setting use global dns to False
2009/08/15 13:17:00 :: setting global dns
2009/08/15 13:17:00 :: global dns servers are None None None
2009/08/15 13:17:00 :: domain is None
2009/08/15 13:17:00 :: search domain is None
2009/08/15 13:17:00 :: setting automatically reconnect when connection drops True
2009/08/15 13:17:00 :: Setting dhcp client to 0
2009/08/15 13:17:00 :: Wireless configuration file found...
2009/08/15 13:17:00 :: Wired configuration file found...
2009/08/15 13:17:00 :: chmoding configuration files 0600...
2009/08/15 13:17:00 :: chowning configuration files root:root...
2009/08/15 13:17:00 :: Using wireless interface...eth1
2009/08/15 13:17:00 :: Using wired interface...eth0
2009/08/15 13:17:06 :: Autoconnecting...
2009/08/15 13:17:09 :: Attempting to autoconnect with wired interface...
2009/08/15 13:17:09 :: Putting interface down
2009/08/15 13:17:09 :: Releasing DHCP leases...
2009/08/15 13:17:09 :: Setting false IP...
2009/08/15 13:17:09 :: Flushing the routing table...
2009/08/15 13:17:09 :: Putting interface up...
2009/08/15 13:17:09 :: Running DHCP
2009/08/15 13:17:09 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:17:09 ::
2009/08/15 13:17:09 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:17:09 ::
2009/08/15 13:17:39 :: dhcpcd: timed out
2009/08/15 13:17:39 ::
2009/08/15 13:17:39 :: DHCP connection failed
2009/08/15 13:17:39 :: exiting connection thread
2009/08/15 13:17:41 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:17:41 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:17:41 :: Sending connection attempt result dhcp_failed
2009/08/15 13:18:10 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:18:10 :: Removing PID file...
2009/08/15 13:18:10 :: Shutting down...
2009/08/15 13:19:01 :: ---------------------------
2009/08/15 13:19:01 :: wicd initializing...
2009/08/15 13:19:01 :: ---------------------------
2009/08/15 13:19:01 :: wicd is version 1.6.2 436
2009/08/15 13:19:01 :: setting backend to external
2009/08/15 13:19:01 :: trying to load backend external
2009/08/15 13:19:02 :: successfully loaded backend external
2009/08/15 13:19:02 :: trying to load backend external
2009/08/15 13:19:02 :: successfully loaded backend external
2009/08/15 13:19:02 :: Automatically detected wireless interface eth0
2009/08/15 13:19:02 :: setting wireless interface eth1
2009/08/15 13:19:02 :: automatically detected wired interface eth1
2009/08/15 13:19:02 :: setting wired interface eth0
2009/08/15 13:19:02 :: setting wpa driver wext
2009/08/15 13:19:02 :: setting use global dns to False
2009/08/15 13:19:02 :: setting global dns
2009/08/15 13:19:02 :: global dns servers are None None None
2009/08/15 13:19:02 :: domain is None
2009/08/15 13:19:02 :: search domain is None
2009/08/15 13:19:02 :: setting automatically reconnect when connection drops True
2009/08/15 13:19:02 :: Setting dhcp client to 0
2009/08/15 13:19:02 :: Wireless configuration file found...
2009/08/15 13:19:02 :: Wired configuration file found...
2009/08/15 13:19:02 :: chmoding configuration files 0600...
2009/08/15 13:19:02 :: chowning configuration files root:root...
2009/08/15 13:19:02 :: Using wireless interface...eth1
2009/08/15 13:19:02 :: Using wired interface...eth0
2009/08/15 13:19:08 :: Autoconnecting...
2009/08/15 13:19:11 :: Attempting to autoconnect with wired interface...
2009/08/15 13:19:11 :: Putting interface down
2009/08/15 13:19:11 :: Releasing DHCP leases...
2009/08/15 13:19:11 :: Setting false IP...
2009/08/15 13:19:11 :: Flushing the routing table...
2009/08/15 13:19:11 :: Putting interface up...
2009/08/15 13:19:11 :: Running DHCP
2009/08/15 13:19:11 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:19:11 ::
2009/08/15 13:19:11 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:19:11 ::
2009/08/15 13:19:41 :: dhcpcd: timed out
2009/08/15 13:19:41 ::
2009/08/15 13:19:41 :: DHCP connection failed
2009/08/15 13:19:41 :: exiting connection thread
2009/08/15 13:19:43 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:19:43 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:19:43 :: Sending connection attempt result dhcp_failed
2009/08/15 13:30:36 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:30:36 :: Removing PID file...
2009/08/15 13:30:36 :: Shutting down...
2009/08/15 13:31:29 :: ---------------------------
2009/08/15 13:31:29 :: wicd initializing...
2009/08/15 13:31:29 :: ---------------------------
2009/08/15 13:31:29 :: wicd is version 1.6.2 436
2009/08/15 13:31:29 :: setting backend to external
2009/08/15 13:31:29 :: trying to load backend external
2009/08/15 13:31:30 :: successfully loaded backend external
2009/08/15 13:31:30 :: trying to load backend external
2009/08/15 13:31:30 :: successfully loaded backend external
2009/08/15 13:31:30 :: Automatically detected wireless interface eth0
2009/08/15 13:31:30 :: setting wireless interface eth1
2009/08/15 13:31:30 :: automatically detected wired interface eth1
2009/08/15 13:31:30 :: setting wired interface eth0
2009/08/15 13:31:30 :: setting wpa driver wext
2009/08/15 13:31:30 :: setting use global dns to False
2009/08/15 13:31:30 :: setting global dns
2009/08/15 13:31:30 :: global dns servers are None None None
2009/08/15 13:31:30 :: domain is None
2009/08/15 13:31:30 :: search domain is None
2009/08/15 13:31:30 :: setting automatically reconnect when connection drops True
2009/08/15 13:31:30 :: Setting dhcp client to 0
2009/08/15 13:31:30 :: Wireless configuration file found...
2009/08/15 13:31:30 :: Wired configuration file found...
2009/08/15 13:31:30 :: chmoding configuration files 0600...
2009/08/15 13:31:30 :: chowning configuration files root:root...
2009/08/15 13:31:30 :: Using wireless interface...eth1
2009/08/15 13:31:30 :: Using wired interface...eth0
2009/08/15 13:31:37 :: Autoconnecting...
2009/08/15 13:31:39 :: Attempting to autoconnect with wired interface...
2009/08/15 13:31:39 :: Putting interface down
2009/08/15 13:31:39 :: Releasing DHCP leases...
2009/08/15 13:31:39 :: Setting false IP...
2009/08/15 13:31:39 :: Flushing the routing table...
2009/08/15 13:31:39 :: Putting interface up...
2009/08/15 13:31:39 :: Running DHCP
2009/08/15 13:31:39 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:31:39 ::
2009/08/15 13:31:40 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:31:40 ::
2009/08/15 13:32:09 :: dhcpcd: timed out
2009/08/15 13:32:09 ::
2009/08/15 13:32:09 :: DHCP connection failed
2009/08/15 13:32:09 :: exiting connection thread
2009/08/15 13:32:12 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:32:12 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:32:12 :: Sending connection attempt result dhcp_failed
2009/08/15 13:38:00 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:38:00 :: Removing PID file...
2009/08/15 13:38:00 :: Shutting down...
2009/08/15 13:39:19 :: ---------------------------
2009/08/15 13:39:19 :: wicd initializing...
2009/08/15 13:39:19 :: ---------------------------
2009/08/15 13:39:19 :: wicd is version 1.6.2 436
2009/08/15 13:39:19 :: setting backend to external
2009/08/15 13:39:19 :: trying to load backend external
2009/08/15 13:39:20 :: successfully loaded backend external
2009/08/15 13:39:20 :: trying to load backend external
2009/08/15 13:39:20 :: successfully loaded backend external
2009/08/15 13:39:20 :: Automatically detected wireless interface eth0
2009/08/15 13:39:20 :: setting wireless interface eth1
2009/08/15 13:39:20 :: automatically detected wired interface eth1
2009/08/15 13:39:20 :: setting wired interface eth0
2009/08/15 13:39:20 :: setting wpa driver wext
2009/08/15 13:39:20 :: setting use global dns to False
2009/08/15 13:39:20 :: setting global dns
2009/08/15 13:39:20 :: global dns servers are None None None
2009/08/15 13:39:20 :: domain is None
2009/08/15 13:39:20 :: search domain is None
2009/08/15 13:39:20 :: setting automatically reconnect when connection drops True
2009/08/15 13:39:20 :: Setting dhcp client to 0
2009/08/15 13:39:20 :: Wireless configuration file found...
2009/08/15 13:39:20 :: Wired configuration file found...
2009/08/15 13:39:20 :: chmoding configuration files 0600...
2009/08/15 13:39:20 :: chowning configuration files root:root...
2009/08/15 13:39:20 :: Using wireless interface...eth1
2009/08/15 13:39:20 :: Using wired interface...eth0
2009/08/15 13:39:27 :: Autoconnecting...
2009/08/15 13:39:29 :: Attempting to autoconnect with wired interface...
2009/08/15 13:39:29 :: Putting interface down
2009/08/15 13:39:29 :: Releasing DHCP leases...
2009/08/15 13:39:29 :: Setting false IP...
2009/08/15 13:39:29 :: Flushing the routing table...
2009/08/15 13:39:29 :: Putting interface up...
2009/08/15 13:39:29 :: Running DHCP
2009/08/15 13:39:29 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:39:29 ::
2009/08/15 13:39:30 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:39:30 ::
2009/08/15 13:39:59 :: dhcpcd: timed out
2009/08/15 13:39:59 ::
2009/08/15 13:39:59 :: DHCP connection failed
2009/08/15 13:39:59 :: exiting connection thread
2009/08/15 13:40:02 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:40:02 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:40:02 :: Sending connection attempt result dhcp_failed
2009/08/15 13:45:10 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:45:10 :: Removing PID file...
2009/08/15 13:45:10 :: Shutting down...
2009/08/15 13:46:13 :: ---------------------------
2009/08/15 13:46:13 :: wicd initializing...
2009/08/15 13:46:13 :: ---------------------------
2009/08/15 13:46:13 :: wicd is version 1.6.2 436
2009/08/15 13:46:13 :: setting backend to external
2009/08/15 13:46:13 :: trying to load backend external
2009/08/15 13:46:14 :: successfully loaded backend external
2009/08/15 13:46:14 :: trying to load backend external
2009/08/15 13:46:14 :: successfully loaded backend external
2009/08/15 13:46:14 :: Automatically detected wireless interface eth1
2009/08/15 13:46:14 :: setting wireless interface eth1
2009/08/15 13:46:14 :: automatically detected wired interface eth0
2009/08/15 13:46:14 :: setting wired interface eth0
2009/08/15 13:46:14 :: setting wpa driver wext
2009/08/15 13:46:14 :: setting use global dns to False
2009/08/15 13:46:14 :: setting global dns
2009/08/15 13:46:14 :: global dns servers are None None None
2009/08/15 13:46:14 :: domain is None
2009/08/15 13:46:14 :: search domain is None
2009/08/15 13:46:14 :: setting automatically reconnect when connection drops True
2009/08/15 13:46:14 :: Setting dhcp client to 0
2009/08/15 13:46:14 :: Wireless configuration file found...
2009/08/15 13:46:14 :: Wired configuration file found...
2009/08/15 13:46:14 :: chmoding configuration files 0600...
2009/08/15 13:46:14 :: chowning configuration files root:root...
2009/08/15 13:46:14 :: Using wireless interface...eth1
2009/08/15 13:46:14 :: Using wired interface...eth0
2009/08/15 13:46:20 :: Autoconnecting...
2009/08/15 13:46:22 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:46:22 :: trying to automatically connect to...101
2009/08/15 13:46:22 :: Connecting to wireless network 101
2009/08/15 13:46:23 :: Putting interface down
2009/08/15 13:46:23 :: Releasing DHCP leases...
2009/08/15 13:46:23 :: Setting false IP...
2009/08/15 13:46:23 :: Stopping wpa_supplicant
2009/08/15 13:46:23 :: Flushing the routing table...
2009/08/15 13:46:23 :: Putting interface up...
2009/08/15 13:46:23 :: Generating psk...
2009/08/15 13:46:23 :: Attempting to authenticate...
2009/08/15 13:46:34 :: Running DHCP
2009/08/15 13:46:34 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:46:34 ::
2009/08/15 13:46:34 :: dhcpcd: eth1: broadcasting for a lease
2009/08/15 13:46:34 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:35 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:35 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:46:35 ::
2009/08/15 13:46:38 :: dhcpcd: eth1: carrier lost
2009/08/15 13:46:38 ::
2009/08/15 13:46:40 :: dhcpcd: eth1: carrier acquired
2009/08/15 13:46:40 ::
2009/08/15 13:46:40 :: dhcpcd: eth1: broadcasting for a lease
2009/08/15 13:46:40 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:45 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:45 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:46:45 ::
2009/08/15 13:46:51 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 :: dhcpcd: forking to background
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 :: DHCP connection successful
2009/08/15 13:46:51 :: Connecting thread exiting.
2009/08/15 13:46:55 :: Sending connection attempt result Success
2009/08/15 13:48:50 :: Putting interface down
2009/08/15 13:48:50 :: Releasing DHCP leases...
2009/08/15 13:48:50 :: Setting false IP...
2009/08/15 13:48:51 :: Flushing the routing table...
2009/08/15 13:48:51 :: Putting interface up...
2009/08/15 13:48:51 :: Running DHCP
2009/08/15 13:48:51 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:48:51 ::
2009/08/15 13:48:51 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:48:51 ::
2009/08/15 13:48:51 :: dhcpcd: eth0: carrier lost
2009/08/15 13:48:51 ::
2009/08/15 13:48:53 :: dhcpcd: eth0: carrier acquired
2009/08/15 13:48:53 ::
2009/08/15 13:48:53 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:48:53 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: offered 192.168.0.193 from 192.168.0.1
2009/08/15 13:48:54 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: acknowledged 192.168.0.193 from 192.168.0.1
2009/08/15 13:48:54 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: checking for 192.168.0.193
2009/08/15 13:48:54 ::
2009/08/15 13:49:00 :: dhcpcd: eth0: leased 192.168.0.193 for 86400 seconds
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 :: dhcpcd: forking to background
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 :: DHCP connection successful
2009/08/15 13:49:00 :: Connecting thread exiting.
2009/08/15 13:49:00 :: Sending connection attempt result Success
2009/08/15 13:53:46 :: Connecting to wireless network 102
2009/08/15 13:53:47 :: Putting interface down
2009/08/15 13:53:47 :: Releasing DHCP leases...
2009/08/15 13:53:47 :: Setting false IP...
2009/08/15 13:53:47 :: Stopping wpa_supplicant
2009/08/15 13:53:47 :: Flushing the routing table...
2009/08/15 13:53:47 :: Putting interface up...
2009/08/15 13:53:47 :: Generating psk...
2009/08/15 13:53:47 :: Attempting to authenticate...
2009/08/15 13:54:03 :: Running DHCP
2009/08/15 13:54:03 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:54:03 ::
2009/08/15 13:54:05 :: dhcpcd: eth1: carrier lost
2009/08/15 13:54:05 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: carrier acquired
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:54:06 ::
2009/08/15 13:54:11 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 :: dhcpcd: forking to background
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 :: DHCP connection successful
2009/08/15 13:54:11 :: Connecting thread exiting.
2009/08/15 13:54:11 :: Sending connection attempt result Success
2009/08/15 13:55:03 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:55:03 :: Removing PID file...
2009/08/15 13:55:03 :: Shutting down...
2009/08/15 13:55:52 :: ---------------------------
2009/08/15 13:55:52 :: wicd initializing...
2009/08/15 13:55:52 :: ---------------------------
2009/08/15 13:55:52 :: wicd is version 1.6.2 436
2009/08/15 13:55:52 :: setting backend to external
2009/08/15 13:55:52 :: trying to load backend external
2009/08/15 13:55:53 :: successfully loaded backend external
2009/08/15 13:55:53 :: trying to load backend external
2009/08/15 13:55:53 :: successfully loaded backend external
2009/08/15 13:55:53 :: Automatically detected wireless interface eth0
2009/08/15 13:55:53 :: setting wireless interface eth1
2009/08/15 13:55:53 :: automatically detected wired interface eth1
2009/08/15 13:55:53 :: setting wired interface eth0
2009/08/15 13:55:53 :: setting wpa driver wext
2009/08/15 13:55:53 :: setting use global dns to False
2009/08/15 13:55:53 :: setting global dns
2009/08/15 13:55:53 :: global dns servers are None None None
2009/08/15 13:55:53 :: domain is None
2009/08/15 13:55:53 :: search domain is None
2009/08/15 13:55:53 :: setting automatically reconnect when connection drops True
2009/08/15 13:55:53 :: Setting dhcp client to 0
2009/08/15 13:55:53 :: Wireless configuration file found...
2009/08/15 13:55:53 :: Wired configuration file found...
2009/08/15 13:55:53 :: chmoding configuration files 0600...
2009/08/15 13:55:53 :: chowning configuration files root:root...
2009/08/15 13:55:53 :: Using wireless interface...eth1
2009/08/15 13:55:53 :: Using wired interface...eth0
2009/08/15 13:55:59 :: Autoconnecting...
2009/08/15 13:56:02 :: Attempting to autoconnect with wired interface...
2009/08/15 13:56:02 :: Putting interface down
2009/08/15 13:56:02 :: Releasing DHCP leases...
2009/08/15 13:56:02 :: Setting false IP...
2009/08/15 13:56:02 :: Flushing the routing table...
2009/08/15 13:56:02 :: Putting interface up...
2009/08/15 13:56:02 :: Running DHCP
2009/08/15 13:56:02 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:56:02 ::
2009/08/15 13:56:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:56:02 ::
2009/08/15 13:56:12 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:56:12 ::
2009/08/15 13:56:32 :: dhcpcd: timed out
2009/08/15 13:56:32 ::
2009/08/15 13:56:32 :: DHCP connection failed
2009/08/15 13:56:32 :: exiting connection thread
2009/08/15 13:56:34 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:56:34 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:56:34 :: Sending connection attempt result dhcp_failed
2009/08/15 13:57:31 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:57:31 :: Removing PID file...
2009/08/15 13:57:31 :: Shutting down...
2009/08/15 13:57:32 :: ---------------------------
2009/08/15 13:57:32 :: wicd initializing...
2009/08/15 13:57:32 :: ---------------------------
2009/08/15 13:57:32 :: wicd is version 1.6.2 436
2009/08/15 13:57:32 :: setting backend to external
2009/08/15 13:57:32 :: trying to load backend external
2009/08/15 13:57:32 :: successfully loaded backend external
2009/08/15 13:57:32 :: trying to load backend external
2009/08/15 13:57:32 :: successfully loaded backend external
2009/08/15 13:57:32 :: Automatically detected wireless interface eth0
2009/08/15 13:57:32 :: setting wireless interface eth1
2009/08/15 13:57:32 :: automatically detected wired interface eth1
2009/08/15 13:57:32 :: setting wired interface eth0
2009/08/15 13:57:32 :: setting wpa driver wext
2009/08/15 13:57:32 :: setting use global dns to False
2009/08/15 13:57:32 :: setting global dns
2009/08/15 13:57:32 :: global dns servers are None None None
2009/08/15 13:57:32 :: domain is None
2009/08/15 13:57:32 :: search domain is None
2009/08/15 13:57:32 :: setting automatically reconnect when connection drops True
2009/08/15 13:57:32 :: Setting dhcp client to 0
2009/08/15 13:57:32 :: Wireless configuration file found...
2009/08/15 13:57:32 :: Wired configuration file found...
2009/08/15 13:57:32 :: chmoding configuration files 0600...
2009/08/15 13:57:32 :: chowning configuration files root:root...
2009/08/15 13:57:32 :: Using wireless interface...eth1
2009/08/15 13:57:32 :: Using wired interface...eth0
2009/08/15 13:57:38 :: Autoconnecting...
2009/08/15 13:57:38 :: Putting interface down
2009/08/15 13:57:38 :: Attempting to autoconnect with wired interface...
2009/08/15 13:57:38 :: Releasing DHCP leases...
2009/08/15 13:57:38 :: Setting false IP...
2009/08/15 13:57:38 :: Flushing the routing table...
2009/08/15 13:57:38 :: Putting interface up...
2009/08/15 13:57:38 :: Running DHCP
2009/08/15 13:57:38 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:57:38 ::
2009/08/15 13:57:38 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:57:38 ::
2009/08/15 13:57:48 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:57:48 ::
2009/08/15 13:58:08 :: dhcpcd: timed out
2009/08/15 13:58:08 ::
2009/08/15 13:58:08 :: DHCP connection failed
2009/08/15 13:58:08 :: exiting connection thread
2009/08/15 13:58:08 :: Sending connection attempt result dhcp_failed
2009/08/15 13:58:10 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:58:10 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:58:46 :: Putting interface down
2009/08/15 13:58:46 :: Releasing DHCP leases...
2009/08/15 13:58:46 :: Setting false IP...
2009/08/15 13:58:46 :: Flushing the routing table...
2009/08/15 13:58:46 :: Putting interface up...
2009/08/15 13:58:46 :: Running DHCP
2009/08/15 13:58:46 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:58:46 ::
2009/08/15 13:58:46 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:58:46 ::
2009/08/15 13:58:56 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:58:56 ::
2009/08/15 13:59:16 :: dhcpcd: timed out
2009/08/15 13:59:16 ::
2009/08/15 13:59:16 :: DHCP connection failed
2009/08/15 13:59:16 :: exiting connection thread
2009/08/15 13:59:16 :: Sending connection attempt result dhcp_failed
2009/08/15 14:10:08 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:10:08 :: Removing PID file...
2009/08/15 14:10:08 :: Shutting down...
2009/08/15 14:10:59 :: ---------------------------
2009/08/15 14:10:59 :: wicd initializing...
2009/08/15 14:10:59 :: ---------------------------
2009/08/15 14:10:59 :: wicd is version 1.6.2 436
2009/08/15 14:10:59 :: setting backend to external
2009/08/15 14:10:59 :: trying to load backend external
2009/08/15 14:10:59 :: successfully loaded backend external
2009/08/15 14:10:59 :: trying to load backend external
2009/08/15 14:10:59 :: successfully loaded backend external
2009/08/15 14:10:59 :: Automatically detected wireless interface eth0
2009/08/15 14:10:59 :: setting wireless interface eth1
2009/08/15 14:10:59 :: automatically detected wired interface eth1
2009/08/15 14:10:59 :: setting wired interface eth0
2009/08/15 14:10:59 :: setting wpa driver wext
2009/08/15 14:10:59 :: setting use global dns to False
2009/08/15 14:10:59 :: setting global dns
2009/08/15 14:10:59 :: global dns servers are None None None
2009/08/15 14:10:59 :: domain is None
2009/08/15 14:10:59 :: search domain is None
2009/08/15 14:10:59 :: setting automatically reconnect when connection drops True
2009/08/15 14:10:59 :: Setting dhcp client to 0
2009/08/15 14:10:59 :: Wireless configuration file found...
2009/08/15 14:10:59 :: Wired configuration file found...
2009/08/15 14:10:59 :: chmoding configuration files 0600...
2009/08/15 14:10:59 :: chowning configuration files root:root...
2009/08/15 14:10:59 :: Using wireless interface...eth1
2009/08/15 14:10:59 :: Using wired interface...eth0
2009/08/15 14:11:06 :: Autoconnecting...
2009/08/15 14:11:09 :: Attempting to autoconnect with wired interface...
2009/08/15 14:11:09 :: Putting interface down
2009/08/15 14:11:09 :: Releasing DHCP leases...
2009/08/15 14:11:09 :: Setting false IP...
2009/08/15 14:11:09 :: Flushing the routing table...
2009/08/15 14:11:09 :: Putting interface up...
2009/08/15 14:11:09 :: Running DHCP
2009/08/15 14:11:09 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:11:09 ::
2009/08/15 14:11:09 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 14:11:09 ::
2009/08/15 14:11:19 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 14:11:19 ::
2009/08/15 14:11:39 :: dhcpcd: timed out
2009/08/15 14:11:39 ::
2009/08/15 14:11:39 :: DHCP connection failed
2009/08/15 14:11:39 :: exiting connection thread
2009/08/15 14:11:41 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:11:41 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 14:11:41 :: Sending connection attempt result dhcp_failed
2009/08/15 14:13:00 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:13:00 :: Removing PID file...
2009/08/15 14:13:00 :: Shutting down...
2009/08/15 14:13:50 :: ---------------------------
2009/08/15 14:13:50 :: wicd initializing...
2009/08/15 14:13:50 :: ---------------------------
2009/08/15 14:13:50 :: wicd is version 1.6.2 436
2009/08/15 14:13:50 :: setting backend to external
2009/08/15 14:13:50 :: trying to load backend external
2009/08/15 14:13:50 :: successfully loaded backend external
2009/08/15 14:13:50 :: trying to load backend external
2009/08/15 14:13:50 :: successfully loaded backend external
2009/08/15 14:13:51 :: Automatically detected wireless interface eth1
2009/08/15 14:13:51 :: setting wireless interface eth1
2009/08/15 14:13:51 :: automatically detected wired interface eth0
2009/08/15 14:13:51 :: setting wired interface eth0
2009/08/15 14:13:51 :: setting wpa driver wext
2009/08/15 14:13:51 :: setting use global dns to False
2009/08/15 14:13:51 :: setting global dns
2009/08/15 14:13:51 :: global dns servers are None None None
2009/08/15 14:13:51 :: domain is None
2009/08/15 14:13:51 :: search domain is None
2009/08/15 14:13:51 :: setting automatically reconnect when connection drops True
2009/08/15 14:13:51 :: Setting dhcp client to 0
2009/08/15 14:13:51 :: Wireless configuration file found...
2009/08/15 14:13:51 :: Wired configuration file found...
2009/08/15 14:13:51 :: chmoding configuration files 0600...
2009/08/15 14:13:51 :: chowning configuration files root:root...
2009/08/15 14:13:51 :: Using wireless interface...eth1
2009/08/15 14:13:51 :: Using wired interface...eth0
2009/08/15 14:13:57 :: Autoconnecting...
2009/08/15 14:13:59 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:14:00 :: trying to automatically connect to...101
2009/08/15 14:14:00 :: Connecting to wireless network 101
2009/08/15 14:14:00 :: Putting interface down
2009/08/15 14:14:00 :: Releasing DHCP leases...
2009/08/15 14:14:00 :: Setting false IP...
2009/08/15 14:14:00 :: Stopping wpa_supplicant
2009/08/15 14:14:00 :: Flushing the routing table...
2009/08/15 14:14:00 :: Putting interface up...
2009/08/15 14:14:00 :: Generating psk...
2009/08/15 14:14:01 :: Attempting to authenticate...
2009/08/15 14:14:11 :: Running DHCP
2009/08/15 14:14:11 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 14:14:11 ::
2009/08/15 14:14:15 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 :: dhcpcd: forking to background
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 :: DHCP connection successful
2009/08/15 14:14:15 :: Connecting thread exiting.
2009/08/15 14:14:17 :: Sending connection attempt result Success
2009/08/15 14:14:17 :: Autoconnecting...
2009/08/15 14:14:17 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:14:17 :: trying to automatically connect to...102
2009/08/15 14:14:17 :: Connecting to wireless network 102
2009/08/15 14:14:17 :: Putting interface down
2009/08/15 14:14:17 :: Releasing DHCP leases...
2009/08/15 14:14:18 :: Setting false IP...
2009/08/15 14:14:18 :: Stopping wpa_supplicant
2009/08/15 14:14:18 :: Flushing the routing table...
2009/08/15 14:14:18 :: Putting interface up...
2009/08/15 14:14:18 :: Generating psk...
2009/08/15 14:14:18 :: Attempting to authenticate...
2009/08/15 14:14:19 :: Running DHCP
2009/08/15 14:14:19 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 14:14:19 ::
2009/08/15 14:14:24 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 :: dhcpcd: forking to background
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 :: DHCP connection successful
2009/08/15 14:14:24 :: Connecting thread exiting.
2009/08/15 14:14:29 :: Sending connection attempt result Success
2009/08/15 14:15:02 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:15:02 :: Removing PID file...
2009/08/15 14:15:02 :: Shutting down...
2009/08/15 14:15:52 :: ---------------------------
2009/08/15 14:15:52 :: wicd initializing...
2009/08/15 14:15:52 :: ---------------------------
2009/08/15 14:15:52 :: wicd is version 1.6.2 436
2009/08/15 14:15:52 :: setting backend to external
2009/08/15 14:15:52 :: trying to load backend external
2009/08/15 14:15:52 :: successfully loaded backend external
2009/08/15 14:15:52 :: trying to load backend external
2009/08/15 14:15:52 :: successfully loaded backend external
2009/08/15 14:15:52 :: Automatically detected wireless interface eth0
2009/08/15 14:15:52 :: setting wireless interface eth1
2009/08/15 14:15:52 :: automatically detected wired interface eth1
2009/08/15 14:15:52 :: setting wired interface eth0
2009/08/15 14:15:52 :: setting wpa driver wext
2009/08/15 14:15:52 :: setting use global dns to False
2009/08/15 14:15:52 :: setting global dns
2009/08/15 14:15:52 :: global dns servers are None None None
2009/08/15 14:15:52 :: domain is None
2009/08/15 14:15:52 :: search domain is None
2009/08/15 14:15:52 :: setting automatically reconnect when connection drops True
2009/08/15 14:15:52 :: Setting dhcp client to 0
2009/08/15 14:15:52 :: Wireless configuration file found...
2009/08/15 14:15:52 :: Wired configuration file found...
2009/08/15 14:15:52 :: chmoding configuration files 0600...
2009/08/15 14:15:52 :: chowning configuration files root:root...
2009/08/15 14:15:52 :: Using wireless interface...eth1
2009/08/15 14:15:52 :: Using wired interface...eth0
2009/08/15 14:15:59 :: Autoconnecting...
2009/08/15 14:16:02 :: Attempting to autoconnect with wired interface...
2009/08/15 14:16:02 :: Putting interface down
2009/08/15 14:16:02 :: Releasing DHCP leases...
2009/08/15 14:16:02 :: Setting false IP...
2009/08/15 14:16:02 :: Flushing the routing table...
2009/08/15 14:16:02 :: Putting interface up...
2009/08/15 14:16:02 :: Running DHCP
2009/08/15 14:16:02 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:16:02 ::
2009/08/15 14:16:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 14:16:02 ::
2009/08/15 14:16:12 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 14:16:12 ::
2009/08/15 14:16:32 :: dhcpcd: timed out
2009/08/15 14:16:32 ::
2009/08/15 14:16:32 :: DHCP connection failed
2009/08/15 14:16:32 :: exiting connection thread
2009/08/15 14:16:34 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:16:34 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 14:16:34 :: Sending connection attempt result dhcp_failed
2009/08/15 14:17:02 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:17:02 :: Removing PID file...
2009/08/15 14:17:02 :: Shutting down...
2009/08/15 15:39:03 :: ---------------------------
2009/08/15 15:39:03 :: wicd initializing...
2009/08/15 15:39:03 :: ---------------------------
2009/08/15 15:39:03 :: wicd is version 1.6.2 436
2009/08/15 15:39:03 :: setting backend to external
2009/08/15 15:39:03 :: trying to load backend external
2009/08/15 15:39:03 :: successfully loaded backend external
2009/08/15 15:39:03 :: trying to load backend external
2009/08/15 15:39:03 :: successfully loaded backend external
2009/08/15 15:39:03 :: Automatically detected wireless interface eth0
2009/08/15 15:39:03 :: setting wireless interface eth1
2009/08/15 15:39:03 :: automatically detected wired interface eth1
2009/08/15 15:39:03 :: setting wired interface eth0
2009/08/15 15:39:03 :: setting wpa driver wext
2009/08/15 15:39:03 :: setting use global dns to False
2009/08/15 15:39:03 :: setting global dns
2009/08/15 15:39:03 :: global dns servers are None None None
2009/08/15 15:39:03 :: domain is None
2009/08/15 15:39:03 :: search domain is None
2009/08/15 15:39:03 :: setting automatically reconnect when connection drops True
2009/08/15 15:39:03 :: Setting dhcp client to 0
2009/08/15 15:39:03 :: Wireless configuration file found...
2009/08/15 15:39:03 :: Wired configuration file found...
2009/08/15 15:39:03 :: chmoding configuration files 0600...
2009/08/15 15:39:03 :: chowning configuration files root:root...
2009/08/15 15:39:03 :: Using wireless interface...eth1
2009/08/15 15:39:03 :: Using wired interface...eth0
2009/08/15 15:39:10 :: Autoconnecting...
2009/08/15 15:39:13 :: Attempting to autoconnect with wired interface...
2009/08/15 15:39:13 :: Putting interface down
2009/08/15 15:39:13 :: Releasing DHCP leases...
2009/08/15 15:39:13 :: Setting false IP...
2009/08/15 15:39:13 :: Flushing the routing table...
2009/08/15 15:39:13 :: Putting interface up...
2009/08/15 15:39:13 :: Running DHCP
2009/08/15 15:39:13 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:39:13 ::
2009/08/15 15:39:13 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:39:13 ::
2009/08/15 15:39:23 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:39:23 ::
2009/08/15 15:39:43 :: dhcpcd: timed out
2009/08/15 15:39:43 ::
2009/08/15 15:39:43 :: DHCP connection failed
2009/08/15 15:39:43 :: exiting connection thread
2009/08/15 15:39:45 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:39:45 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:39:45 :: Sending connection attempt result dhcp_failed
2009/08/15 15:41:46 :: Daemon going down, killing wicd-monitor...
2009/08/15 15:41:46 :: Removing PID file...
2009/08/15 15:41:46 :: Shutting down...
2009/08/15 15:42:33 :: ---------------------------
2009/08/15 15:42:33 :: wicd initializing...
2009/08/15 15:42:33 :: ---------------------------
2009/08/15 15:42:33 :: wicd is version 1.6.2 436
2009/08/15 15:42:33 :: setting backend to external
2009/08/15 15:42:33 :: trying to load backend external
2009/08/15 15:42:33 :: successfully loaded backend external
2009/08/15 15:42:33 :: trying to load backend external
2009/08/15 15:42:33 :: successfully loaded backend external
2009/08/15 15:42:33 :: Automatically detected wireless interface eth0
2009/08/15 15:42:33 :: setting wireless interface eth1
2009/08/15 15:42:33 :: automatically detected wired interface eth1
2009/08/15 15:42:33 :: setting wired interface eth0
2009/08/15 15:42:33 :: setting wpa driver wext
2009/08/15 15:42:33 :: setting use global dns to False
2009/08/15 15:42:33 :: setting global dns
2009/08/15 15:42:33 :: global dns servers are None None None
2009/08/15 15:42:33 :: domain is None
2009/08/15 15:42:33 :: search domain is None
2009/08/15 15:42:33 :: setting automatically reconnect when connection drops True
2009/08/15 15:42:33 :: Setting dhcp client to 0
2009/08/15 15:42:33 :: Wireless configuration file found...
2009/08/15 15:42:33 :: Wired configuration file found...
2009/08/15 15:42:33 :: chmoding configuration files 0600...
2009/08/15 15:42:33 :: chowning configuration files root:root...
2009/08/15 15:42:33 :: Using wireless interface...eth1
2009/08/15 15:42:33 :: Using wired interface...eth0
2009/08/15 15:42:39 :: Autoconnecting...
2009/08/15 15:42:42 :: Attempting to autoconnect with wired interface...
2009/08/15 15:42:42 :: Putting interface down
2009/08/15 15:42:42 :: Releasing DHCP leases...
2009/08/15 15:42:42 :: Setting false IP...
2009/08/15 15:42:42 :: Flushing the routing table...
2009/08/15 15:42:42 :: Putting interface up...
2009/08/15 15:42:42 :: Running DHCP
2009/08/15 15:42:42 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:42:42 ::
2009/08/15 15:42:42 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:42:42 ::
2009/08/15 15:42:52 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:42:52 ::
2009/08/15 15:43:12 :: dhcpcd: timed out
2009/08/15 15:43:12 ::
2009/08/15 15:43:12 :: DHCP connection failed
2009/08/15 15:43:12 :: exiting connection thread
2009/08/15 15:43:14 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:43:14 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:43:14 :: Sending connection attempt result dhcp_failed
2009/08/15 15:44:27 :: Daemon going down, killing wicd-monitor...
2009/08/15 15:44:27 :: Removing PID file...
2009/08/15 15:44:27 :: Shutting down...
2009/08/15 15:44:48 :: ---------------------------
2009/08/15 15:44:48 :: wicd initializing...
2009/08/15 15:44:48 :: ---------------------------
2009/08/15 15:44:48 :: wicd is version 1.6.2 436
2009/08/15 15:44:48 :: setting backend to external
2009/08/15 15:44:48 :: trying to load backend external
2009/08/15 15:44:48 :: successfully loaded backend external
2009/08/15 15:44:48 :: trying to load backend external
2009/08/15 15:44:48 :: successfully loaded backend external
2009/08/15 15:44:48 :: Automatically detected wireless interface eth0
2009/08/15 15:44:48 :: setting wireless interface eth1
2009/08/15 15:44:48 :: automatically detected wired interface eth1
2009/08/15 15:44:48 :: setting wired interface eth0
2009/08/15 15:44:48 :: setting wpa driver wext
2009/08/15 15:44:48 :: setting use global dns to False
2009/08/15 15:44:48 :: setting global dns
2009/08/15 15:44:48 :: global dns servers are None None None
2009/08/15 15:44:48 :: domain is None
2009/08/15 15:44:48 :: search domain is None
2009/08/15 15:44:48 :: setting automatically reconnect when connection drops True
2009/08/15 15:44:48 :: Setting dhcp client to 0
2009/08/15 15:44:48 :: Wireless configuration file found...
2009/08/15 15:44:48 :: Wired configuration file found...
2009/08/15 15:44:48 :: chmoding configuration files 0600...
2009/08/15 15:44:48 :: chowning configuration files root:root...
2009/08/15 15:44:48 :: Using wireless interface...eth1
2009/08/15 15:44:48 :: Using wired interface...eth0
2009/08/15 15:44:58 :: trying to load backend ioctl
2009/08/15 15:44:58 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
2009/08/15 15:44:58 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
2009/08/15 15:44:58 :: trying to load backend external
2009/08/15 15:45:57 :: Autoconnecting...
2009/08/15 15:45:57 :: Putting interface down
2009/08/15 15:45:57 :: Attempting to autoconnect with wired interface...
2009/08/15 15:45:57 :: Releasing DHCP leases...
2009/08/15 15:45:57 :: Setting false IP...
2009/08/15 15:45:57 :: Flushing the routing table...
2009/08/15 15:45:57 :: Putting interface up...
2009/08/15 15:45:57 :: Running DHCP
2009/08/15 15:45:57 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:45:57 ::
2009/08/15 15:45:57 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:45:57 ::
2009/08/15 15:46:07 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:46:07 ::
2009/08/15 15:46:27 :: dhcpcd: timed out
2009/08/15 15:46:27 ::
2009/08/15 15:46:27 :: DHCP connection failed
2009/08/15 15:46:27 :: exiting connection thread
2009/08/15 15:46:29 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:46:29 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:46:29 :: Sending connection attempt result dhcp_failedWas able to boot this weekend and did an update which updated the kernel. Rebooted and there was no network. Rebooted again and no network... rebooted again and... had network!? I tried changing wicd to use dhclient only and did the triple reboot test again and it didn't change anything... randomly working network... same with dhcpcd.
So it appears to be a dhcp timeout issue however it makes no sense because before the update a couple weeks ago it was working every time with no hiccup. Am I not providing enough information that will aid in anyone helping me figure this out? -
When I send e-mails sometimes they do not appear in my sent items?
I send many e-mails but sometimes they do not appear in my sent items yet i know they have gone because I get a reply? It isn't all - just some?
Quit Mail.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. If you get a warning that the file is in use when you try to empty the Trash, log out and log back in. -
On certain web sites(with java applets embedded or rich content),sometimes browser hotkeys are beeing used with other functionality (eg.: youtube uses ctrl + tab for sliding between player controls).How can I prevent this ?
Thanks for posting this!
I would only mention that your definition is incomplete for this -
Contextual selector A type of Style Sheet Selector that
and that it's most often referred to now as a Descendent selector, not a contextual selector. It's basically the same as the Compound selector that you have already defined.... -
Audio only works sometimes on videos and the volume buttons on the side only work sometimes,very aggrivating, please help!!
Hello Tetnus,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
Best of luck,
Mario -
Logic bounces unwanted audio when exporting audio to movie
Hey all,
So as the title says, Logic seems to be bouncing a few tracks that i've now completely deleted from the Logic project. I even removed them from the bin.
Every time I try to export audio to movie these audio tracks come up in the exported .mov. I have no clue why this is happening. Any thoughts?Hi
Are these audio tracks that were/are embedded in the movie?
When bouncing to a (new) movie, these audio tracks are automatically included unless you opt out (de-select them).
CCT -
I have a new iPhone 4s - having lots of trouble with Siri. It seems cranky - sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)? How can I find fonts availble on my phone?
Thanks for any helpNot in Acrobat unless your image is already in the PDF format.
This is a feature of forms created with LiveCycle Designer. -
I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.
Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al -
DVD and CD sharing will not let you play or share DVD movies and audio CD's. Does any one know of a way to get music from a CD on a MacBook Pro wirelessly to an iMac?
I cannot find the eMac install disk, and I haven't been able to get it to start up from my 10.3 CDRm (holding down option or c), though I read something somewhere about these not being able to start up from system folders earlier than those they shipped with. I've dealt with this sort of thing several times before, and it always seemed to work to simply use target disk mode.
It definitely won't start up fromt the 10.5 DVD-R, and I'm pretty sure I tried putting the MBP into TM to use its optical drive as well, but it didn't work. But it's worth trying again, and I appreciate your input greatly. -
I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
Mike Moore
Corvallis, Oregonmikem
Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
Under the Input tab, make sure that you have your microphone selected.
Please let us know the outcome.
Thank you.
ATR -
Sometimes messages are not sent
Sometimes Mail does not send an email message, which is problematic of course, but the real problem is that the message is nowhere to be found, except when rebuilding the Outbox (or by looking into the Outbox.mbox folder in Finder).
Some lines in the log do indicate something might be going wrong:
Jun 18 15:43:03 lab-226 Mail[7970]: Failed to get message data for <LibraryMessage: 0x1bf9e520, library id: 111528>
Jun 18 15:43:04 lab-226 Mail[7970]: couldn't load body for <LibraryMessage: 0x1bf9e520, library id: 111528>, aborting
Jun 18 15:51:52 lab-226 Mail[7970]: deleting invalid message from outbox
Does anyone experience this problem as well?I have this exact same problem. I'll type out a whole message, click send and poof! Gone. The message does not appear in my outbox or in my drafts folder even if I have saved a draft. I've had to resort to copying all my emails before sending just in case Mail doesn't send, I can still paste the message and try again. I don't remember always having this issue but I don't know exactly when it cropped up. The other day I received a message that something was corrupt and Mail needed to rebuild my index. Mail closed and then took 30 mins or so to rebuild my thousands of messages. When it opened back up I saw the messages that had "dissapeared" before in my outbox so I assume they actually were sent? I also noticed messages in my inbox that I hadn't seen before, some from weeks ago from people who I had told I never received their email. Very frustrating!
I'm wondering if the problem has anything to do with 10.5.3 or if it had cropped up before. I don't remember.
Does anyone have any ideas what could be wrong? I'm thinking of switching to Thunderbird if this doesn't get fixed soon. I can't be worrying about every email I type, whether or not it's been sent. -
Sometimes iPhoto does not retain the name on a face I've added to a photo. I have 'added a face' then flipped to the next picture then back to that picture and the label has disappeared.
No. It's supposed to be automatic. You might try repairing the library's database and then see if it still crops up now and then. If that doesn't help try rebuilding it the same way.
Launch iPhoto with the Option+Command keys held down and select the database repair option in the rebild window:
Then the rebuild option if necessary.
OT -
Why does Firefox sometimes ask me if I want to save my tabs when I close, and sometimes it does not? I usually want to save them, so this is a pain. I'm on a Mac, OS 10.5.8
== This happened ==
A few times a week
== don't know...There can be various causes for this:
[[Firefox does not ask to save tabs and windows on exit]] -
Using Acrobat 8, Embeded audios are not playing in browser.
I have PDFs with embeded audio. But when load PDFs online and open in browser then AUDIO is not playing.
Hi Piyush_Bajpai,
Do you have flash player installed on the machine?
Please use this link to download Flash Player -
http://helpx.adobe.com/acrobat/kb/reader-acrobat-flash-player-download .html#main_download
If the problem still persists, please help us undersrtand the problem by answering the below -
1. Are there any errors when the content does not play ?
2. What audio content type (file extension) are you trying to use ?
3. Do you access PDF files (having audio/video) from an http url ?
4. Could you please provide one such sample file to help me replicate ? -
When I publish a movie using Captivate 6 I sometimes get a slide that is overlayed with part of a previous slide. Does anyone know why this might be happening and what I can do to prevent it?
Which version of 6? Check the slide quality, if it is at Low, push it to High or Optimized. Then uncheck all compression settings in Preferences, Project, SWF Size and Quality.
Maybe you are looking for
-
Posting of Commission Exp to calculate the Cost of Goods Sold
Hi Team, I do work in an automobile manufacturing organization and is new to SAP FI module. I have a business requirement which I need to fulfill; I would appreciate if all you gurus help me with finding the solution. Business Scenario: at present,
-
How can I insert a row into a table with the foreign key of column ID? The foreign key link to other unique key of other table. My code: Long id = 43850943l; PreparedStatement persInfUpdate = con.prepareStatement("INSERT INTO PersonalInfo (ID, FirstN
-
Suggestion: Please make the Combine Files dialog modal to the Acrobat application instance.
I often combine files into a PDF with Acrobat (XI). It is annoying that the main Acrobat window is shown while the Combine Files dialog window is open. I often review other PDF files during the process of selection for later combination. It happens f
-
InDesign CC - protective shutdown when updating InCopy changes
I cannot update changes in an InDesign file that our copy editor passed back to me after making his changes in InCopy. As soon as I attempt to "update all" or selectively make one of the changes the application crashes with a "serious error" and the
-
Mail not loading in & I want to get rid of Classic format
Saw Classic choice on my email page and clicked on it to check it out. Didn't want it but cannot find a way to restore previous layout. Then I noticed my email is not loading in anymore. Help!