Movies not imported / recognized from my Kodak Easyshare Z712 IS

I post this new subject just to notice that from that type of camera.
So: movies from Kodak Easyshare Z712 IS _*ARE NOT SUPPORTED*_ by iMovie08 !!!!!
Type of the files are .MOV so that's why I am astonished !!
Putting different .MOV files into a converter give me that:
- mjpeg, yuvj422p, 320x240 is supported by iMovie08
- mpeg4, yuv420p, 640x480 is NOT supported by iMovie08

mpeg4, yuv420p, 640x480 is NOT supported by iMovie08
If you separate the audio and video you will find the MPEG-4 video will correctly import/edit in iMovie '08. It is the µ-Law 2:1 audio that iMovie '08 will not import/edit. Easiest way to rectify the problem is to export the file using the "Movie to MPEG-4" pop-up and "pass trough" the video while converting the audio to AAC-LC. You can use 64 Kbps mono audio rate data and 44.1 KHz sampling rate. This is overkill for your source but will usually match your later output.
P.S. Don't have a Kodak camera so I would be interested in learning what audio compression was used with the 320x240 MJPEG video file that did import. Didn't realize the camera used different compression for each mode. You may be the first to have mentioned this fact.

Similar Messages

  • My dad bought the Mac mini last week.  It works great, but we can't import pictures from our Kodak Easyshare Z650 camera.mHow can we fix this?

    Hello Apple!
    The Mac mini won't let me import my photos from my Kodak camera onto iPhoto. It says the files are unreadable. When I upload pictures from th e iPhone, it works just fine. Could you please help me.
    Thanks,
    Olivia H

    Do you have the proper software installed?
    http://support.en.kodak.ca/app/answers/detail/a_id/16433/kw/easyshare%20z650%20d rivers%20for%20mac/selected/true
    Also, is there some settings in the camera as to what type of files it will save to?

  • After upgrade to photos not able to import photos from my kodak M883 camera - says not correct format - still jpeg - worked before update - help!

    After upgrade to photos am not able to import photos from my Kodak M883 camera.  Program says not correct format - camera files are still jpeg - had no trouble importing before upgrade - Help!

    Same thing is happening with me.  IPhoto will not import .jpg from my Kodak!  It used to all the time.  Now it gives me an error msg saying .jpg is in the wrong file format.  Can someone help?
    Steve 

  • I can not import photos from PC to my Ipad, it says iTunes will no longer sync photos to the iPad

    I can not import photos from my PC to the iPad, it says  iTunes will no longer sync photos to the iPad

    YES Terence!  Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop.   But that doesn't explain why I'm having to go that route now.   Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore?   I really liked the convenience of the click and drag option. 
    I don't have the time tonight to export and burn a lot of CD/DVDs.  I'll try that tomorrow and make sure my photos are moving properly.  I also need to export photos to my external hard drive to make sure that route is working. 
    Wouldn't you know that my Apple Care Plan runs out this Wednesday?!  I need to make sure everything is working properly before that expires. 
    Thank you so much for your help.   I really, really appreciate it.

  • How do I "move" (not copy) keynotes from my MacBook Pro to my iMac via sharing?

    How do I "move" (not copy) keynotes from my MacBook Pro to my iMac via sharing?

    Whenever you transfer something from one drive or volume to another, it is copied and the original remains where it was no matter the method you use. It is so by design: just in case you were to delete it on the one drive, you still have it on the other. However, if you no longer want the original, simply delete it and empty the trash.

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

  • Do not import video from iPhon 4s in iPhoto 9.4.3 (720.91)

    Do not import video from iPhon 4s(6.1.3(10B329)) in iPhoto 9.4.3 (720.91) on my iMac(iMac 27"_Intel Core i5 2,8 GHz_RAM 4 GB_HDD 3Tb_ATI Radeon HD 5750 1Gb_Mac Os 10.8.4)
    "unreadable files.
    Could not import because did not recognize the file format"

    Presumably you mean 'Does not...'?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • I can not import pictures from iPad into Aperture

    I have an iPad 1, latest iOS. I shoot Nikon RAW files that I import unsingh the camera connector kit (CCK). I use Aperture, again latest version. All of that in OS X latest and greatest on an iMac (March 2009).
    I simply can not import pics from the iPad onto Aperture.
    AP3 does see the iPad when I go in import mode (CMD I) and does see all my pics (just came back from vacation with 3000+).
    Importing All starts the process, the import wheel spins, but the nothing happens . If I double click on the "Importing..." message to see the scheduled tasks, I do see that a number of importing tasks are scheduled.
    However, no progress is ever made.
    Any ideas?

    Are you connected to the wi-fi and/or 3G

  • Aperture 3 does not import video from iPhone

    Aperture 3 does not want to import my videos from iPhone anymore. This used to work perfectly fine before, now Aperture hangs as soon as I try to upload any video.
    Is this a known bug??

    I'm experiencing the similar but Aperture not importing photos from iPhone. When I go to iPhoto and import then it works. My software is all latest.

  • I downloaded the newest version of camera raw for LR. I have LR4 and can not import photos from my new Nikon D750. The download  said it was sucessful but I still can not import photos.

    I downloaded the newest version of camera raw for LR. I have LR4 and can not import photos from my new Nikon D750. The download  said it was sucessful but I still can not import photos.

    Lightroom doesn't use the Camera Raw plug-in. So downloading the latest Camera Raw didn't do anything at all for you. The only way to update or upgrade Lightroom is to obtain the latest version. If you have Lightroom 4 then the last version of Lightroom you can have at no additional cost is Lightroom 4.4.1. If the camera you are using requires anything newer than what is supported and that version of Lightroom then it will require an upgrade to Lightroom 5.

  • Since the new downlaod, I can't import photos from my Kodak C813. I get an "unreadable file" message. What to do?

    Since the new Photo download, I can't import photos from my Kodak C813. I get an "unreadable file" message. What to do?

    See if Image Capture will let you upload the photos from the camera to a folder on the Desktop.  If it will then check the photos by opening them up with Preview to make sure all of them are good.  Then import the folder into Photos.
    If that goes OK reformat the memory card in the camera, take some test shots and see if Photo will import.

  • Lightroom 4.1 will not import video from the Olympus OM-D EM-5

    Lightroom 4.1 will not import video from the Olympus OM-D EM-5. It sees the files in the import dialog, but it fails during import.

    Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
    http://forums.adobe.com/message/4882852#4882852
    SUGGESTION:
    Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
    http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
    If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

  • I updated LR5 to 5.7, its still not importing files from my D750. Any help would be appreciated.

    I updated LR5 to 5.7, its still not importing files from my D750. Any help would be appreciated.

    Did you try unchecking Sync Photos on the Photos tab of your sync settings and syncing?  If this doesn't remove them, try creating an empty folder on your PC, then selecting to sync this folder on the Photos tab and syncing your phone.  This should delete the existing photos prior to syncing the empty folder.
    Also, you can transfer these photos to your computer if you need to by using an app like PhotoSync.

  • ImageJ in Yosemite can not import video from QuickTime plugin

    ImageJ in Yosemite can not import video from QuickTime plugin.... it seems can not found QuickTime_Capture.jar within QuickTime_Plugins.jar but I'm sure it is in the plugin directory.
    I google this problem but not luck!
    James

    Thank you Benjt and Sue:
    I have first chosen to followed Sue's suggestion concerning the firewire connections since that looked to be the one most easily done quickly. I therefore had to make more room on the hard drive in my MacBook Pro since the drive is only 100 GB. I normally use an external 400GB drive to hold my video files since one of the plays last May required about 200GB! However, the play this time was a short one and not really High Density anyway like the one was in May with a much finer camera. I have been connecting the external HD via Firewire800.
    I simply moved a number of files from my MacBook Pro drive and put them in the external HD as well as another HD and then disconnected the external HD from my MacBook. I was, indeed, able to import the entire tape in one shot into iMovie. iMovie is still not working right since I found that I had to click "import" in iMovie to start collecting a clip and then hit "play" on my camcorder to actually import the tape contents into the clip. I found the whole play, just 50 min this time, in that clip when we returned home this evening.
    I can now get the editing done one their last play for the kids and have DVDs for them when I go back up to Gainesville to record their current play on Thursday evening.
    I will then devote some time to trying to solve the rest of the problem, looking into Benjt's suggestions.
    Thanks very much for your very timely critical and positive help this afternoon. For your information, I also have been working on learning Final Cut Express but as I tried to put all of my reading into practice, I now I can't even get FCE to open - but that's another story and a very different problem.
    Thanks again.
    BL "Gramp"

  • HELP!! can not import video from canon 7D onto i movie all help appreciated

    can not find anyway to import footage from 7d onto imoive 09, please help.

    Hi
    Did You try to import Your material into iPhoto first. Then in iMovie Browser Window
    select Top menu eg Macintosh HD or iPhoto.
    My Leica D-Lux3 and Nikon D300s - needs it to be done this way.
    Yours Bengt W

Maybe you are looking for

  • HDD dead no back up or disc drive, have external HDD but can't back up?

    Hello, Computer in question is mac book pro late 2008. So I've been looking since 10 this morning to sort this out and i just can't seem to find a way round this?? I have had the disk utility on trying new image and can't get that to work. Ive been r

  • Secure connection failed in version 37.0.1 but works in all other browsers and firefox 36

    https://mail.twcbc.com/ will not load. The is Time Warner's business class web email. The specific message is: Secure Connection Failed The connection to mail.twcbc.com was interrupted while the page was loading. The page you are trying to view canno

  • GridBagLayout problems

    Hi everyone... i m having some problems with GridBagLayout() manager... Basically my code concerning GBL manager is: JPanel mainPanel=new JPanel(); GridBagLayout grid=new GridBagLayout(); mainPanel.setLayout(grid); Now i want to add 2 more panels to

  • Assigning transactions to a user

    Hi All, I want to assign 5 transactions to a user where, for 2 transactions the user should have a display option only and for the rest of the transaction he should have the full authorization. I know the basics of creating user (su01) and roles (pfc

  • 4.3 won't update to 5.1

    I keep getting asked to update my Pages...I'm running 4.3 Pages '09 but when I go to update it says it's installed (version 5.1) but it isn't. What can I do?